[Request] In need of PowerOff.apk and PowerOff.odex - LG Optimus 2x

Hi all,
Incidentally, I removed the application poweroff.apk with Titanium Backup, and I not did the backup. Now, my phone is not shutting down. When to put turn off, it just restarts.
I am with an enormous anguish. My question: I can turn it off by the battery, it will again turn on? I am with fear that the same reason that he is not shutting down, run the risk of it not connecting.
That is because I take the opportunity to change the firmware, and pass the v20q for the v20s. How to do it with Smartflash,I need disconnect the device to complete the procedure.
What do I turn it off again?
Can I change the firmware?
Please, I need help!
Thank you.

root explorer
Someone uses the RootExplorer?

I pulled out my battery like a hundred times. Nothing should happen.
You need to either reflash your ROM or install the update, both will give you the apk back.

Open terminal, write:
su
poweroff
It might work, let me know
PlacidoFerreira said:
Someone uses the RootExplorer?
Click to expand...
Click to collapse
Everyday
Sent from my LG-P990 using xda premium

tonyp said:
I pulled out my battery like a hundred times. Nothing should happen.
Click to expand...
Click to collapse
but did you also remove the poweroff, before removing the battery, and returned to work?

HerrKuk said:
Open terminal, write:
su
poweroff
Click to expand...
Click to collapse
"poweroff: not found..."
I removed with Titanium Backup ;/
what do I do?

PlacidoFerreira said:
"poweroff: not found..."
I removed with Titanium Backup ;/
what do I do?
Click to expand...
Click to collapse
Off course terminal emulator will not help you as you said you deleted those apk files so as tonyp said you should reflash your rom
Sent from my Optimus 2X using xda premium

PlacidoFerreira said:
but did you also remove the poweroff, before removing the battery, and returned to work?
Click to expand...
Click to collapse
No, but I've done way worse things than that
Don't worry, nothing will happen.
And even if you hit the 0.00001% chance and are stuck - luckily we do have NVFlash and can unbrick every softbricked phone.
That's one big advantage of the LG 2x! You need to damage the hardware to brick the phone.

grimmyrippy said:
you should reflash your rom
Click to expand...
Click to collapse
I want to do this. But for flash It is necessary to turn off the phone.
And this is the problem, if I turn off, it will turn on again?
The process "flash" ensure it will turn on again?

tonyp said:
You need to damage the hardware to brick the phone.
Click to expand...
Click to collapse
Oow Gods! xD
How wonderful to know that.
I will go trust in you, and I will make this procedure.
Afterward I post the result

tonyp said:
No, but I've done way worse things than that
Don't worry, nothing will happen.
And even if you hit the 0.00001% chance and are stuck - luckily we do have NVFlash and can unbrick every softbricked phone.
That's one big advantage of the LG 2x! You need to damage the hardware to brick the phone.
Click to expand...
Click to collapse
+1
So dont be afraid there's a lot of here
Sent from my Optimus 2X using xda premium

PlacidoFerreira said:
"poweroff: not found..."
I removed with Titanium Backup ;/
what do I do?
Click to expand...
Click to collapse
Thats strange, i have always thought that poweroff is an busybox applet (/system/xbin/poweroff), and should work even without poweroff.apk
Just for the fun of it, try
su
reboot
Sent from my LG-P990 using xda premium

HerrKuk said:
i have always thought that poweroff is an busybox applet (/system/xbin/poweroff)
Click to expand...
Click to collapse
I tried reboot, but the apk not returned. It only restarted normally.
There are an .apk and an .odex (poweroff) located in (System/app/)
I will try Reflash.

To Extract .kdz or .bin
Before performing the reflash, is there any way to extract the file .kdz or .bin from firmware I'm using in by Win7? With this, look for poweroff.apk, to extract, and put in my phone.

If it is noobish, then I apologise sincierly, but I have an idea.
Is it not possible to extract from other phone and upload it somewhere for you to put in your phone?
Like for example, would it help if say I (stock/root/ 2.3.4 O2X) get it for you and uploaded to some fileshare thingy?
(My understanding (being new to O2X but long running user of Androids (G1, Milestone 1, O2X) is that no matter what you do to your software, there is always flash, or nandroid bckup, or ROM install. So no worries. )

petr.klos said:
If it is noobish, then I apologise sincierly, but I have an idea.
Is it not possible to extract from other phone and upload it somewhere for you to put in your phone?
Like for example, would it help if say I (stock/root/ 2.3.4 O2X) get it for you and uploaded to some fileshare thingy?
(My understanding (being new to O2X but long running user of Androids (G1, Milestone 1, O2X) is that no matter what you do to your software, there is always flash, or nandroid bckup, or ROM install. So no worries. )
Click to expand...
Click to collapse
Yes that should work. I would have done that myself if I'd use a Stock ROM.

Thread resolved
OK guys,
Just reflash solved the problem.
Thread resolved
Thanks very much to all !!

Related

[ROOT]The FLASHABLE zip file for ROOTing Atrix 2.3.4 HKTW

Hi, after test for some times, i made the flashable root package for 2.3.4 (That the device has flash the leaked HKTW 2.3.4 and unlocked the device)
NOTE:
Unlocked Atrix 4G with HKTW 2.3.4
Please flash the CWM recovery first: http://forum.xda-developers.com/showthread.php?t=1138541
You should have a external sd card in your device, because the recovery cann't recognize the internal card
DOWNLOAD:
PLEASE download from the attachment, I'm really sorry that my site was down.
I think all of you know how to flash zip from recovery, so I'll not give hint about this, LOL
MD5SUM:
986c5fe6bf0e8eeef5dd5235b2c57cb5
Original Post @: http://ligux.com/t-60-1-1.html
More infomation, please goto: http://LiGux.com
shafa,,
you rocks,, chinese rocks
Cool I needed this. Thanks
Sent from my MB860 using XDA App
vista1984 said:
shafa,,
you rocks,, chinese rocks
Click to expand...
Click to collapse
LOL, you know the Chinese Pinyin: shafa? Cool
Anyone know how to get back to stock, or another rom like greyblur. I am stuck on a softbrick.
kleeman7 said:
Anyone know how to get back to stock, or another rom like greyblur. I am stuck on a softbrick.
Click to expand...
Click to collapse
You can flash the official sbf file to restore to origin, like the 1.2.6 sbf
kleeman7 said:
Anyone know how to get back to stock, or another rom like greyblur. I am stuck on a softbrick.
Click to expand...
Click to collapse
Did sbf rsd lite work for you?
Sent from my MB860 using XDA Premium App
flzyup said:
You can flash the official sbf file to restore to origin, like the 1.2.6 sbf
Click to expand...
Click to collapse
I was using a update sbf, not a full rom one. Up and running again. Thanks.
flzyup said:
lol, you know the chinese pinyin: Shafa? Cool
Click to expand...
Click to collapse
哈哈 沙发我更懂了 跨国来支持
Works great! Thanks!
kleeman7 said:
I was using a update sbf, not a full rom one. Up and running again. Thanks.
Click to expand...
Click to collapse
Yeah I think alot of people make that mistake. That's why when people ask I always say make sure to grab the "full" sbf not the service!
Thanks for the zip root method! Much appreciated!
Uses this and trying to flash with the newest CW build that is available with no avail.
Keeps being unable to mount SDcard ...
Will have to try the other way to do this for now but thank you for the work.
Worked perfect. Thanks
Sent from my MB860 using XDA App
how do i use this?? already have teh new cwm
now waht???
i HATE when pple leave out basic info, i got school work, i cant remember EVERYTHING EVERYTIME.
Hey, so, I ran into a slight problem.. It doesnt actually root the phone... Or so I've found. What happened to me is it worked perfectly, flashed via new cwm nicely, and I had SU in app drawer. I then decided to try and restore my apps via TB, and it doesnt let me batch anything, see anything, etc. It's like I don't have root. Then I tried getting root explorer and it FC's on opening the app. WTF?
jbrussee said:
Hey, so, I ran into a slight problem.. It doesnt actually root the phone... Or so I've found. What happened to me is it worked perfectly, flashed via new cwm nicely, and I had SU in app drawer. I then decided to try and restore my apps via TB, and it doesnt let me batch anything, see anything, etc. It's like I don't have root. Then I tried getting root explorer and it FC's on opening the app. WTF?
Click to expand...
Click to collapse
try rebooting the device ( i had to do it a couple of times )
slowpc said:
Uses this and trying to flash with the newest CW build that is available with no avail.
Keeps being unable to mount SDcard ...
Will have to try the other way to do this for now but thank you for the work.
Click to expand...
Click to collapse
This is because you didn't read my post carefully. You should have a EXTERNAL SDCARD in your device first! Because the recovery cann't mount the internal sdcard.
jbrussee said:
Hey, so, I ran into a slight problem.. It doesnt actually root the phone... Or so I've found. What happened to me is it worked perfectly, flashed via new cwm nicely, and I had SU in app drawer. I then decided to try and restore my apps via TB, and it doesnt let me batch anything, see anything, etc. It's like I don't have root. Then I tried getting root explorer and it FC's on opening the app. WTF?
Click to expand...
Click to collapse
There is another way to check whether the root of your device work or not.
Run cmd in Windows or terminal in Linux.
execute the following cmd:
Code:
adb shell
su -
After you input the "su -" cmd, you should have a dialog to allow root access in your device. I.e, the root works. Otherwise, it doesn't work.
BTW, does your device unlocked and flash the HKTW android 2.3.4 rom?
jahizen said:
how do i use this?? already have teh new cwm
now waht???
i HATE when pple leave out basic info, i got school work, i cant remember EVERYTHING EVERYTIME.
Click to expand...
Click to collapse
TOO bad, the zip file should be flashed as the normal way to flash rom.
GOTO recovery then choose this zip file to flash.
BTW, you should copy the zip file to the external sdcard first!
michael0619 said:
哈哈 沙发我更懂了 跨国来支持
Click to expand...
Click to collapse
=============
Fun!

I think I broke my O2X...help?

Hello! New member here so please excuse me if I'm posting to the wrong forum or anything like that.
Not to take long of your time, I can't get my phone to boot. It shows the 2 LG logos and won't proceed beyond that. So I need to know if there's a way to flash a ROM and a Recovery with it like that.
Thanks for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
May.Assem said:
Hello! New member here so please excuse me if I'm posting to the wrong forum or anything like that.
Not to take long of your time, I can't get my phone to boot. It shows the 2 LG logos and won't proceed beyond that. So I need to know if there's a way to flash a ROM and a Recovery with it like that.
Thanks for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
Can you access CWM? Try to pull out the battery, put it in, press power button + volume down at the same time. Wait til the LG logo appears and release it.
mrgian said:
Can you access CWM? Try to pull out the battery, put it in, press power button + volume down at the same time. Wait til the LG logo appears and release it.
Click to expand...
Click to collapse
No. It just freezes at the LG logo.
Sent from either my Iconia-A500 or my LG-P990, depending.
May.Assem said:
No. It just freezes at the LG logo.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
I guess you need to flash the stock ROM by using SmartFlashTool. Its easy to use. There's a thread that has simple instructions.
mrgian said:
I guess you need to flash the stock ROM by using SmartFlashTool. Its easy to use. There's a thread that has simple instructions.
Click to expand...
Click to collapse
As weird as this is, I suddenly can start into recovery. Is SmartFlashTool still the way to go? I ask because I don't want to ruin things any further.
Thanks again for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
May.Assem said:
As weird as this is, I suddenly can start into recovery. Is SmartFlashTool still the way to go? I ask because I don't want to ruin things any further.
Thanks again for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
if u can go into recovery i would advise djangos last rom or temaseks or misjugedtwats
May.Assem said:
As weird as this is, I suddenly can start into recovery. Is SmartFlashTool still the way to go? I ask because I don't want to ruin things any further.
Thanks again for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
That's a good news then! What version of cmw u got? Do you have sdcard? I would suggest temasek cm7.2 build. 2 thumbs up!
mrgian said:
That's a good news then! What version of cmw u got? Do you have sdcard? I would suggest temasek cm7.2 build. 2 thumbs up!
Click to expand...
Click to collapse
Really?! That's great to know.
Recovery is v5.0.2.7
ETA: I flashed the ROM I had on before all that mess started and now my phone is working again. I'm not sure if things went awry because AOKP's last build was screwed or because I removed the SDcard before flashing in an attempt to force the phone to use the 5GB of internal memory that has been sitting useless since I got the device.
can't I flash the last owaine version I used?
May.Assem said:
Really?! That's great to know.
Recovery is v5.0.2.7
ETA: I flashed the ROM I had on before all that mess started and now my phone is working again. I'm not sure if things went awry because AOKP's last build was screwed or because I removed the SDcard before flashing in an attempt to force the phone to use the 5GB of internal memory that has been sitting useless since I got the device.
can't I flash the last owaine version I used?
Click to expand...
Click to collapse
Your phone working now? Try doing the 3 wipes (factory, cache partition, davlik [advance]).
mrgian said:
Your phone working now? Try doing the 3 wipes (factory, cache partition, davlik [advance]).
Click to expand...
Click to collapse
It is.
I wiped every thing before flashing the ROM and I have a complete copy of all the files I had on the SDcard saved on my PC. As soon as it finishes charging I'll move the TB files back to the SDcard and see if I can restore my apps. Unfortunately, I have to redo my system settings by hand. But I don't really mind.
Thanks a lot for your help. I really appreciate it.
Sent from either my Iconia-A500 or my LG-P990, depending.
May.Assem said:
It is.
I wiped every thing before flashing the ROM and I have a complete copy of all the files I had on the SDcard saved on my PC. As soon as it finishes charging I'll move the TB files back to the SDcard and see if I can restore my apps. Unfortunately, I have to redo my system settings by hand. But I don't really mind.
Thanks a lot for your help. I really appreciate it.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
Your welcome. Glad I helped.

Easier way to roow and install CWM for LG 2X

Hi guys
I recently brought a 2nd hand LG 2X.
This rom is totally stock, to be precise, it is a Hong Kong version v10d
Since I want to improve the battery life and have a more defined rom.
I would like to root and install CWM for my LG 2X.
Up to now, I have downloaded a few kdz from the subforum.
I have little experience before with LG phone, Last one i played around was LG P500. I remember last time i could easily root the phone by super1click, and then install rom manager from play store.
And from there (play store) i install CWM recovery.
I would like to find the confirmation from you guys that
Can i go for the same path again, super1click>rom manager>CWM recovery??
Thx in advance!!
j4371 said:
I would like to find the confirmation from you guys that
Can i go for the same path again, super1click>rom manager>CWM recovery??
Thx in advance!!
Click to expand...
Click to collapse
Yes, that's the correct sequence. And I'd recommend Rusty's excellent page here to get the latest CWM.
http://forum.xda-developers.com/showthread.php?t=1098745
But before you start, please make sure you have the right model of O2X. Make sure you have p990 and NOT p999 nor su660 to use the cwm linked above.
I got a semi-brick that way, solved it nvflashing CWM, my luck perhaps
thx both of you guys!
japmsn: can you be a bit more specific, how you bricked your phone last time?
So i can learn from your experience
Thx
j4371 said:
thx both of you guys!
japmsn: can you be a bit more specific, how you bricked your phone last time?
So i can learn from your experience
Thx
Click to expand...
Click to collapse
Don't worry about bricking your 2x man its unbrickable. Unless you like break the USB (;
sent from my wii remote
j4371 said:
thx both of you guys!
japmsn: can you be a bit more specific, how you bricked your phone last time?
So i can learn from your experience
Thx
Click to expand...
Click to collapse
Yes the good thing is - if you don't brick the hardware this phone is unbrickable because you can always revert everything back with NVFlash. Nothing to worry about.
Sent from my LG-P990 using XDA
tonyp said:
Yes the good thing is - if you don't brick the hardware this phone is unbrickable because you can always revert everything back with NVFlash. Nothing to worry about.
Click to expand...
Click to collapse
IF your phone is recignized by the Computer. No installation or drivers made my LG 2x available for NVflash. Smartflash worked fine for me.
j4371 said:
thx both of you guys!
japmsn: can you be a bit more specific, how you bricked your phone last time?
So i can learn from your experience
Thx
Click to expand...
Click to collapse
I rooted and then installed rom manager, from it I installed CWM and then chose reboot to recovery and got stuck at LG logo. Then in order to revive it I used smartflash but couldn't connect so in the end used a thread here at xda called "last chance to recover" or something like that which was basically a .bat file I had to double click in order for it to flash CWM using nvflash.
It's not to scare you, quite the opposite, if something goes wrong it seems there's always hope like people have already suggested here.
greets
First: root with "unlockroot".
Second: flash a recovery console via PC.
Sent from my LG-P990 using xda premium

[Q] knocked on the recovery

I have a Samsung device Galaxy SIII Mini (GT-I 8190)
Accidentally installed a version that was not his, and knocked on the recovery, and now my device does not get any updates, not through the OTA and automatic updates, simply the recovery screwed.
I tried to change version, and restore the original version and it did not help ..
By the way, every time a version I do, he gets stuck, and I must do him param then he recovers back. No param is stuck in the front window.
You know how you fix it please?
I dont think that any update was published.
Sent from my GT-I8190 using xda app-developers app
.
ppero196 said:
I dont think that any update was published.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Well, what shall I do?
Can fix this?
Maybe flash an official firmware from the start and do a hard reset (after the flashing).
That should definitely install the official recovery again!
quendil said:
Maybe flash an official firmware from the start and do a hard reset (after the flashing).
That should definitely install the official recovery again!
Click to expand...
Click to collapse
How do I do this?
salah_nahi said:
How do I do this?
Click to expand...
Click to collapse
You can download a new firmware from sammobile.com and then use the following guide for instructions:
http://www.tsar3000.com/Joomla/inde...and-stock-firmware&catid=57:how-to&Itemid=104
I tried what you said .. It did not help .. Still in the same situation
Sent from my GT-I8190 using xda app-developers app
salah_nahi said:
I tried what you said .. It did not help .. Still in the same situation
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Was your flash succesful and did you do a hard reset after the flash?
Can you describe us EXACTLY (by letter) what your device does?
.
quendil said:
Was your flash succesful and did you do a hard reset after the flash?
Can you describe us EXACTLY (by letter) what your device does?
Click to expand...
Click to collapse
I did install the original version, the installation is completed to the end ..
After doing the installation device stuck, I could not do anything to him, not a hard reset, or anything that is stuck and went to recovery.
The device remains stuck until I did a setup to PARAM
Well, the way I understand I need to Install a new ClockworkMod Recovery..
Where can I get this file please?
salah_nahi said:
Well, the way I understand I need to Install a new ClockworkMod Recovery..
Where can I get this file please?
Click to expand...
Click to collapse
There is no cwm recovery for our phone yet.
quendil said:
You can download a new firmware from sammobile.com and then use the following guide for instructions:
http://www.tsar3000.com/Joomla/inde...and-stock-firmware&catid=57:how-to&Itemid=104
Click to expand...
Click to collapse
quendil said:
There is no cwm recovery for our phone yet.
Click to expand...
Click to collapse
How I saw that s iii mini and the sii is the same system and the same processor and the same data to both devices,
what do you say? I can try the cwm recovery of the S II on my device?
salah_nahi said:
How I saw that s iii mini and the sii is the same system and the same processor and the same data to both devices,
what do you say? I can try the cwm recovery of the S II on my device?
Click to expand...
Click to collapse
please dont do it. you risk bricking your phpne.
quendil said:
please dont do it. you risk bricking your phpne.
Click to expand...
Click to collapse
Well then I will not do anything,
I understand that I have to wait until a CWM to my device ..
Right?
salah_nahi said:
Well then I will not do anything,
I understand that I have to wait until a CWM to my device ..
Right?
Click to expand...
Click to collapse
yes mate as we all do.
there is a guide for building cwm in xda university
if i get time i might study a bit for it.
quendil said:
yes mate as we all do.
there is a guide for building cwm in xda university
if i get time i might study a bit for it.
Click to expand...
Click to collapse
So come on, when you have something suitable for my device do not forget me ..
And really I thank you for helping me.
Thanks man :good:
salah_nahi said:
I did install the original version, the installation is completed to the end ..
After doing the installation device stuck, I could not do anything to him, not a hard reset, or anything that is stuck and went to recovery.
The device remains stuck until I did a setup to PARAM
Click to expand...
Click to collapse
sorry my english is not so good
I have exactly the same problem I do not come purely from recopvery menu
already tried everything from nor even with ADB hardreset not one time with the code * # 87976633 #. if I pull on it ne other firmware I've also the problem that the programs I had before the bottles are then on it is still there or twice since
there may be the possibility to erase the phone completely, format as in the PC hard drive???
or what can I do otherwise??
[FONT="<font><font>Arial Black</font></font>"]I needed help penetrate[/FONT]
jony1512 said:
sorry my english is not so good
I have exactly the same problem I do not come purely from recopvery menu
already tried everything from nor even with ADB hardreset not one time with the code * # 87976633 #. if I pull on it ne other firmware I've also the problem that the programs I had before the bottles are then on it is still there or twice since
there may be the possibility to erase the phone completely, format as in the PC hard drive???
or what can I do otherwise??
[FONT="<font><font>Arial Black</font></font>"]I needed help penetrate[/FONT]
Click to expand...
Click to collapse
Probably your problem is like mine, you have the recovery fails, and you can not do anything, that recovery is available now, so have to wait

LG 4X accelerometer doesnt work!! HELLLP

Hi to all, i have a problem with the accelerometer sensor, its just simple doesnt work to me, in some games who was necessary that i rotate the phone for left or from right it does nothing, im using LG stock v20c (4.1.2) and some mods in it, iodak v6 kernel...
I was searching in the forum for the same problem but didnt found so i have to create this post! anyone who as able to help me resolve this problem? i dont want to change my rom to another, just resolve this cr** problem!
thanks.
copy2050 said:
Hi to all, i have a problem with the accelerometer sensor, its just simple doesnt work to me, in some games who was necessary that i rotate the phone for left or from right it does nothing, im using LG stock v20c (4.1.2) and some mods in it, iodak v6 kernel...
I was searching in the forum for the same problem but didnt found so i have to create this post! anyone who as able to help me resolve this problem? i dont want to change my rom to another, just resolve this cr** problem!
thanks.
Click to expand...
Click to collapse
What have you done with it, and how old is your LG?
deownagee said:
What have you done with it, and how old is your LG?
Click to expand...
Click to collapse
I have done some changes, remove some software i didnt use using titanium backup, freeze some apps and services too, remove some empty pastes in system directory using root explorer, install iodak kernel, install mods like sound optimization via cwm nothing more! My 4x have 3/4 months i have buying it new!
what i do wrong?
copy2050 said:
I have done some changes, remove some software i didnt use using titanium backup, freeze some apps and services too, remove some empty pastes in system directory using root explorer, install iodak kernel, install mods like sound optimization via cwm nothing more! My 4x have 3/4 months i have buying it new!
what i do wrong?
Click to expand...
Click to collapse
Steps i think is needed:
1. Try to reflash LG Software 4.1.2 (see if solved. not? proceed next steps.)
2. Relock Bootloader
3. Send back to LG and hope they can solve it.
Sorry if my grammar was wrong I'm 15 and learning English.
deownagee said:
Steps i think is needed:
1. Try to reflash LG Software 4.1.2 (see if solved. not? proceed next steps.)
2. Relock Bootloader
3. Send back to LG and hope they can solve it.
Sorry if my grammar was wrong I'm 15 and learning English.
Click to expand...
Click to collapse
Relock bootloader is not necessary (i have sure!), i already re-flash my phone with original firmware and did change nothing, still doesnt work! i will try 3º option you say, and i will contact LG about the problem...sure will say same thing you say to me: try to re-flash with firmware...
i'm asking here about to resolve this problem without contact lg, i sure was simple to resolve it with few steps! more experts person will give me the solution! anyway thanks, i wait for other responses of more experts in this forum...
anyone?
copy2050 said:
Relock bootloader is not necessary (i have sure!), i already re-flash my phone with original firmware and did change nothing, still doesnt work! i will try 3º option you say, and i will contact LG about the problem...sure will say same thing you say to me: try to re-flash with firmware...
i'm asking here about to resolve this problem without contact lg, i sure was simple to resolve it with few steps! more experts person will give me the solution! anyway thanks, i wait for other responses of more experts in this forum...
anyone?
Click to expand...
Click to collapse
I'm glad i could help ya wish you luck buddy!
Close this thread, i found the solution to make it work...just re-flash and now safe remove the apps to get in work and no fault again!
copy2050 said:
Close this thread, i found the solution to make it work...just re-flash and now safe remove the apps to get in work and no fault again!
Click to expand...
Click to collapse
i like the way u put it xD you havent changed anything.
"I have done some changes, remove some software i didnt use using titanium backup, freeze some apps and services too, remove some empty pastes in system directory using root explorer, install iodak kernel, install mods like sound optimization via cwm nothing more! My 4x have 3/4 months i have buying it new!"
if the kernel and mods are nothing then what ? xD especially kernel... kernel is everything. you know it could be the kernel also that caused u the problem. go read what kernel is. its the communication between software and hardware.
But ok you havent changed much

Categories

Resources