Stucked in seus - XPERIA X8 Q&A, Help & Troubleshooting

Hi, i've tried to install primehd on an anlucked bootloader phone, the phone crash while displaying the sony ericson logo. i've tried to repair it with seus, but it stopped working at the begin while controlling the connected phone. What can i do?

Can you boot into recovery on your phone?
sent from my x8 running sde ROM
Click THANKS if I helped

You could either try and get into recovery and restore a backup.
If you have none, you'll have to full wipe.
If you can't get into recovery, then this should probably help:
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
Using FlashTool, flash the original SE kernel by following the instructions in the link above. But this means you'll have to start your phone from the beginning (root again, etc.).

Related

[solved] Can't enter recovery after 'format system' in CWM

Hey guys,
I may just have the most stupid thing I could possibly do. I've got a soft-rooted Xperia SP (TowelRoot) and opened CWM Recovery to try to install Cyanogenmod. It cited I had to 'format system' and I rebooted the phone thereafter. Now it's stuck on the Sony Logo and I can't get it into recovery anymore. Even by force-rebooting via the hardware button on the back I can reboot the phone, but it stucks at the sony logo.
Please help, I haven't got a clue..
Update: I can get into fastboot mode. However, my bootloader is still locked.
Blackvibes said:
Hey guys,
I may just have the most stupid thing I could possibly do. I've got a soft-rooted Xperia SP (TowelRoot) and opened CWM Recovery to try to install Cyanogenmod. It cited I had to 'format system' and I rebooted the phone thereafter. Now it's stuck on the Sony Logo and I can't get it into recovery anymore. Even by force-rebooting via the hardware button on the back I can reboot the phone, but it stucks at the sony logo.
Please help, I haven't got a clue..
Update: I can get into fastboot mode. However, my bootloader is still locked.
Click to expand...
Click to collapse
when you wipe data the cmw is gone....best thing to do now is to flash stock ftf ROM via flashtool ...go here and panic
Well, I'm glad all android phones have a fast boot mode, which I was used to with my previous HTC One X. I Quickly fast boot flashed a new boot.img and I had CWM back on. Then I installed CyanogenMod and I was done. Pretty easy in fact.

[SOLVED] Unbricking my xperia z

Hi everyone, so recently i had my xperia z soft bricked after installing TWRP recovery, then i got it hard bricked after pressing a wrong button at the CWM recovery advanced menue which i installed after TWRP failed to install the CM 14 Rom. There was no sign of life whatsoever.
Using the testpoint method i flashed APPSW c6602 firmware, the flashing worked, and the phone came back to life,the led LIT. And the sony logo followed by the charging screen pops up when i connect it to the charger. However it doesn't go into flashmode using hardware keys it just enters charging mode this was also the case before i bricked it). Im clueless as to how im going to install a software on it without the flashmode. any help would be greatly appreciated. Update: flashed 5.1.1 firmware using fastboot from blinkenlights.
Phone boots enters menu, then reboots.
Installed TWRP recovery using fastboot. Works well. Now downloading CM13 rom.
UPDATE: succeeded in installing cm13! rom is working like a charm.
rebooting again in twrp recovery.
hello,
I rooted phone, unlock bootloader and flash custom recovery using twrp app then after rebooting phone it opens in twrp recovery then I reboot by selecting system reboot but it again starts in twrp recovery only plz help.
Can somebody please post a working link for build 222 (android 5.1.1) Indian genric I extremely need the firmware for my bricked c6602

Want to flash CWM, but went wrong..

Hello guys,
I wanted to flash CWM on my Xperia SP. My phone is bootloader unlocked and rooted. When I wanted to flash CWM (by kernel.elf), my phone got stuck on sony logo (small logo). So I thought it was a good idea to flash back to stock (the one on this site C5303: http://xperiafirmware.com/8-firmware/37-sony-xperia-sp-c5303). However, when I did that, an error occured in FlashTool and FlashTool aborted the operation. Now I'm stuck on the big Sony logo. When I connect my phone to the computer, it immediately goes into flash mode. Can somebody help me?
Kind regards,
Jelle

Stuck at logo, not a loop

My phone is unlockboothloader, i just did not notice about that and accept the OTA update, then it started to stuck in logo, but i could still get into cwm recovery, after reboot many times, it was same then i clicked wipe data in cwm recovery then reboot again. This time it still stuck at logo and i cant access cwm recovery anymore. I tried to flash stock rom by Flashtool but it always announce that "Please turn on unknown sources and debugging" after running a bit. What can i do now? Please help me. Thank you
Use Sony companion to repair your phone
Sent from my Xperia SP using Tapatalk

issues flashing stock help needed

can anyone running stock rom of a xperia z c6603 send me a nandroid backup of a clean os?
my xperia refuses to flash stock roms
using emma
it flashes then reboot into black
flash tool says its a unknown device
i have twrp running using fastboot
i only manage to get custom roms working (using zips)
ive tried to download a zip flashable stock rom file but all links either are dead or non existant (anyone got a backup for me please?)
heres a video of it turning on for the first time after a emma flash
> link for yt video after the watch url thingy EOQU4NgX2CQ
ive tried to flash a boot.img and it managed to show the boot screen of the stock rom but gets stuck in the animation so no solution yet
ive been trying to get stock back on this for 5 weeks already
got flashtool to detect the device but it says driver is too old and idk what to proceed next
Stuck at black screen (light on) after logo loading, right?
atgeek said:
got flashtool to detect the device but it says driver is too old and idk what to proceed next
Click to expand...
Click to collapse
Go to device manager and uninstall all drivers and install the drivers from the flashtool/drivers folder.
sony z
I wanted to return the factory software to Sony with the earlier I had lineago 7.1 and the software said it was inserted and when I turned on the phone stands only the logo sony and the phone will not start if it can help

Categories

Resources