issues flashing stock help needed - Xperia Z Q&A, Help & Troubleshooting

can anyone running stock rom of a xperia z c6603 send me a nandroid backup of a clean os?
my xperia refuses to flash stock roms
using emma
it flashes then reboot into black
flash tool says its a unknown device
i have twrp running using fastboot
i only manage to get custom roms working (using zips)
ive tried to download a zip flashable stock rom file but all links either are dead or non existant (anyone got a backup for me please?)
heres a video of it turning on for the first time after a emma flash
> link for yt video after the watch url thingy EOQU4NgX2CQ
ive tried to flash a boot.img and it managed to show the boot screen of the stock rom but gets stuck in the animation so no solution yet
ive been trying to get stock back on this for 5 weeks already

got flashtool to detect the device but it says driver is too old and idk what to proceed next

Stuck at black screen (light on) after logo loading, right?

atgeek said:
got flashtool to detect the device but it says driver is too old and idk what to proceed next
Click to expand...
Click to collapse
Go to device manager and uninstall all drivers and install the drivers from the flashtool/drivers folder.

sony z
I wanted to return the factory software to Sony with the earlier I had lineago 7.1 and the software said it was inserted and when I turned on the phone stands only the logo sony and the phone will not start if it can help

Related

Stucked in seus

Hi, i've tried to install primehd on an anlucked bootloader phone, the phone crash while displaying the sony ericson logo. i've tried to repair it with seus, but it stopped working at the begin while controlling the connected phone. What can i do?
Can you boot into recovery on your phone?
sent from my x8 running sde ROM
Click THANKS if I helped
You could either try and get into recovery and restore a backup.
If you have none, you'll have to full wipe.
If you can't get into recovery, then this should probably help:
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
Using FlashTool, flash the original SE kernel by following the instructions in the link above. But this means you'll have to start your phone from the beginning (root again, etc.).

[Q] Bricked Xperia Z?

Hello, my xperia Z C6603 screen isn’t turns on. The device isn’t rooted.
I disassemmbled the phone and I put the parts in a new frame. After reassembly, the phone worked fine with the new frame and screen and I used it about one week. Then I thought I flash a new lollipop firmware instead the kitkat because the lollipop wasn’t updateable yet in my firmware customization. So I flashed the newest lollipop 5.0.2. ( 10.6.A.0.454_1270-7298_R1E Central Europe1) stock firmware with the 0.9.18.6 flashtool and the things go badly.
The first boot was succesful but after the boot the screen went colorful and I saw nothing besides but if I pushed the volume up or down button I heard the volume sound. I turned of the phone by power on/off and volume up button and I tried to flash other firmwares. The flash methode is always succesful but the phone didn’t work. (I tried the 3 different android versions stock firmwares jb kitkat lollipop.) I used flashtool, emma and pc companion too with locked and unlocked bootloader.
I think the screen is work fine because sometimes after flash a firmware and I turn off the phone first the Sony boot logo is appear but after that nothing happen.
Is there anything else I can do, or is it hard-bricked?
Sorry for my bad English.
I heard you already unlocked your bootloader. How if you install any recovery and try boot onto it. If it success, try install any custom rom via recovery. Let me know the result.

[SOLVED] Black screen after installing rom

Hello, ive just ****ed up my xperia z1 trying to install the new bliss v3 rom.
I wanted to try a rom so i followed the tutorials, rooted the phone, installed supersu, dual recovery and (i thought i did it) unlock bootloader..
Entered to the recovery, wipe all data (after i backed up all my info) and installed the rom and gapps, after installation I reset the system and was excited to see the changes but I got a black scren with red led tilting with no Sony logo.
Bliss rom v3 needed unlocked the bootloader and I forgot that step, so now i dont know what to do...
This is the rom: http://forum.xda-developers.com/yur...bliss-rom-6-0-1-team-bliss-yu-yureka-t3301708
Im downloading the firmware 14.5.A.0.242 (C6943) and installed flashtool hopping that could help, but i dont think my computer will recognize my phone....
Any thoughts??
EDIT:
I was able to download firmware with Xpirifirm, had problems with my pc to recognize through usb the phone, several flashes got freeze, but finally flash worked and my phone is working again.

please help bricked xperia sp after flashing a custom kernel

I was on CM11 / android 4.4.4 and I've wanted to flash a custom kernel.The only one which I found to be compatible is NayakKernel.I downloaded it on my phone and I've flashed it by PHLIZ recovery,everything was fine until I rebooted,I saw that the screen was red and green and the DPI was set to 500 or more.Now the touchscreen works and the display has the same problem.Im sure that this is a software problem because when I boot my phone the kernel is image appears with normal colors.The problem is that I cant enter in recovery and I cant flash the stock firmware via flashtool because when the flashing process starts my phone automatically reboots showing the charging battery.But Im able to enter flash mode or fastboot. Please guys help I really need this phone :crying:

Xperia e1 d2105 stuck in a bootloop

hello
I've recently found my old Xperia e1 dual d2105 and say I want to try to root this phone
so I tried to follow this.
but for the unlocking bootloader part, I used the instructions on the Sony website and successfully unlocked it.
then I flashed Philz recovery (I don't know if this is the correct term flashing). then I entered the custom recovery and everything as far as know was good.
so then I wanted to root by the same tutorial but when I entered the SuperSu it didn't ask for the update instead it said that the Su binary is occupied.
so my stupid mind suggested instead of trying to solve the problem go to the magisk website and follow that instruction. so I went there and downloaded the zip file then reboot and went into custom recovery and installed it. but when I rebooted the sony logo came and then I was stuck (i think it is called a bootloop).
so I detached the battery to turn the phone off and tried to turn it on but the screen is stuck at the Sony logo and some times it turns himself off:silly:
so I searched on how to get out of a bootloop but I had to get in the recovery mode (or flash mode I think) but when I press power + vol down phone starts up and vibrates and the light turns green but then the light turns off and I'm stuck at the Sony logo:crying:
so if there is anyone who can help me get out of this situation please respond :crying::crying::crying:
also, I tried to go into recovery mode with ADB but I got error: device not found
I have downloaded and installed the USB driver.
You have to go to fastboot mode, then boot twrp and flash new rom

Categories

Resources