I’ve been compiling some Cyanogenmod 9 builds for my tab recently and I've decided to share them here. The Cyanogenmod project is still under heavy development, so there will be bugs. Although I will be testing the wifi builds before I post them I may not be able to catch all bugs before I release the build; install these builds at your own risk and be aware of what you are doing. I take no responsibility for any damage caused by these builds. If I notice small bugs while testing I will make a note of them with the release. I plan on updating these builds every 3 days.
I am fairly new to the Android scene, so please provide feedback if you feel that I could be doing something better.
Thanks to:
The Cyanogenmod team and pershoot- This is their work, I am simply compiling their code.
RootzWiki - Providing gapps packages
Changelogs:
If there are major changes I will try to note them along with the builds, but for all other changes refer to the Cyanogenmod code review system: http://review.cyanogenmod.com/#q,status:merged,n,z
For gapps changelogs, refer to the RootzWiki gapps page: http://wiki.rootzwiki.com/Gapps
Builds:
2012.05.11
ROM:
Mirror 1: http://d-h.st/XIP
Mirror 2: http://ge.tt/4Llv4ZH/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 8e32a8b85babc703cbd04492096c8a92
2012.04.30
ROM:
Mirror 1: http://d-h.st/rTw
Mirror 2: http://ge.tt/46YIw2H/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 470c7de00e2d20a79c1491d73f3c7aac
2012.04.27
ROM:
Mirror 1: http://d-h.st/yOi
Mirror 2: http://ge.tt/9pq9LxG/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 54b269e017db71150f7631f6e6aac47f
Instructions:
1. Make a nandroid backup and save it in a safe place.
2. Wipe data, cache, and dalvik cache.
3. Install ROM zip in CWM.
4. Install GAPPS zip in CWM.
5. Reboot
Note: A wipe is probably not required for every single build, but it can't hurt. Make sure you make a backup even if you don't wipe.
A Youtube apk can be found here: http://forum.xda-developers.com/showthread.php?t=1529715
If you enjoy these builds, you may wish to make a donation:
Cyanogenmod - http://www.cyanogenmod.com/ - See bottom of page
Me - https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
will test it tomorrow. Thank you!
for some odd reason when i click on ROM download link, i get this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
badboy47 said:
will test it tomorrow. Thank you!
for some odd reason when i click on ROM download link, i get this...
Click to expand...
Click to collapse
Thanks! I look forward to hearing the results. The filehosting site I'm using might have been flagged by ESET for some reason. In fact, the reason I didn't use devhost is because I use the same security software and I've had this exact same problem with them. It should work if you temporarily disable virus protection, I assure you that there's nothing malicious in these files If it's still causing problems I'll re-host the files somewhere else tomorrow.
out of curiousity, what's different about this ROM than the other (supposedly...) nightly builds here? Regardless, thanks!
slack04 said:
out of curiousity, what's different about this ROM than the other (supposedly...) nightly builds here? Regardless, thanks!
Click to expand...
Click to collapse
They are all built from the same code so the only real difference is update frequency. The other kangs tend to update every 1-2 weeks so they may be more well tested; I'm aiming to provide something more cutting edge. The builds listed as "nightly" are referring to an official snapshot Cyanogen posted earlier this month, it hasn't been updated and seems to have been pulled from the download site as well.
EDIT: FIXED
Sent from my SGH-I997 using xda premium
When Cyanogen team pushed out the 2 nightlies for the tab they pushed one for P4wifi and one for P4tmo and the one for P4tmo could be used on P4(GT-P7500). So my question is, can we use the one for Verizon LTE also or is there any hardware diffrence between P4tmo and Verizon device?
nickwarn said:
When Cyanogen team pushed out the 2 nightlies for the tab they pushed one for P4wifi and one for P4tmo and the one for P4tmo could be used on P4(GT-P7500). So my question is, can we use the one for Verizon LTE also or is there any hardware diffrence between P4tmo and Verizon device?
Click to expand...
Click to collapse
I'm not entirely sure, but my guess is that there is probably a hardware difference. I would suggest trying this build: http://forum.xda-developers.com/showthread.php?t=1461240. I will try to post a p4tmo build next time but I won't be able to test it myself.
Coffeebeans said:
I'm not entirely sure, but my guess is that there is probably a hardware difference. I would suggest trying this build: http://forum.xda-developers.com/showthread.php?t=1461240. I will try to post a p4tmo build next time but I won't be able to test it myself.
Click to expand...
Click to collapse
Ok, i stay of it then. But it sure is tempting to try. When we used Tmo build on P4 we just had to change updater script and it was fully functional with 3G.
not to be the annoying brat here, but are the camera functionalities fixed yet?
martyr2k6 said:
not to be the annoying brat here, but are the camera functionalities fixed yet?
Click to expand...
Click to collapse
No camera in any ICS ROM until Samsung releases their code. None. Not going to happen. Period. Stop asking.
I think there is a problem with ICS rom on my LTE tab. It doesn't matter which roms i tried, i always have the battery drain issue ( due to system awake during standby mode.)
- I did format data/wipe cache + davik before flashed the rom.
- Auto sync on except for picture
- Other apps i use which are running in backgound are Hd widget, wizz widget , friendcaster, Battery monitor widget. These are the same app i use when i running 3.2 twz rom ( battery drain about 20-30 mAh. With ICS rom, it is 170-180mAh).
=>Does anyone know how i can solve this problem? Thank in advance!
Just a quick update on what's going on:
Pershoot has posted new builds in the other kang threads; these builds contain new library files as well as kernel updates. You may want to check out the updated CWM recoveries he has built as well. I'll be building these new libraries into my builds starting with the next one. If the kernel updates aren't merged into cyanogenmod at the time of the next build I'll build a kernel as well. I've also decided to leave the 3G and LTE builds to other developers for the time being, since I don't have the hardware to test them it's hard to keep up with updates and issues.
Since I updated I cannot be my tab to connect to my windows pc any ideas?
Simpson8 said:
Since I updated I cannot be my tab to connect to my windows pc any ideas?
Click to expand...
Click to collapse
Go to Settings > Storage > Menu button at top-right of screen> USB computer connection > Select MTP
Great! I've been using the builds from rootzwiki since they get updated frequently. Might switch to these since I visit here daily.
New build is up. Enjoy!
Is this ice cream sandwich? I wasn'tsure
mvaughn12 said:
Is this ice cream sandwich? I wasn'tsure
Click to expand...
Click to collapse
Yes, it is.
trying to download keep saying daily limit reached
Related
[highlight]I know you're happy to see some movement regarding the Galaxy Note and ICS but please refrain from posting to this thread unless you have to add anything of value [/highlight]
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on experimental builds is the leading
** cause of male impotence.
[size=+1]IMPORTANT NOTES[/size]
Click to expand...
Click to collapse
This is a experimental Build of the current state of CyanogenMod 9 for the Samsung Galaxy Note. CM 9 is based on latest AOSP sources plus some usefull tweaks and features.
CyanogenMod 9 is still under heavy development and will probably be finished in January/February 2012. The device specific part for the Galaxy Note is under heavy Development, too.
[highlight]FLASH AT YOUR OWN RISK[/highlight]
[size=+1]WHAT'S WORKING[/size]
Click to expand...
Click to collapse
WiFi should work as expected.
3G/GPRS/EDGE Data and Calling
Audio
Touchscreen as well as the S-Pen (proprietary S-Pen Apps by Samsung are not included and would'nt work anyway.
Sensors should work. (ie. at least GPS is confirmed to work properly)
[size=+1]KNOWN BUGS[/size]
Click to expand...
Click to collapse
Bluetooth is unstable. Don't rely on it just yet
Battery Usage doesn't work.
MTP Mode does not work. You need to push/pull files via adb
Camera doesn't work. Will be that way until we can get our hands on a ICS leak for the Galaxy Note
[size=+1]INSTRUCTIONS[/size]
Click to expand...
Click to collapse
Installation using ODIN
Odin 1.83 should be fine. If you don't know what Odin this, stop reading further right now. This rom isn't for you.
Do a full wipe in the Recovery mode before flashing.
Enter Download Mode on your device.
Start Odin. Load up the ROM in the PDA Section of Odin. Make sure not not to change any settings like Flash Lock, Re-Partition etc. Just use Auto-Reboot and F. Reset Time.
[highlight]Flashing this rom WILL increase your binary counter and may/will void your warranty.[/highlight]
After flashing make sure to boot into Recovery and do a full wipe. If you want you can adb push GAPPS to your device and install them accordingly.
Installation using CWM
- READ FAQs: http://teamhacksung.org/wiki/index.p...sked_Questions
- Make sure you're running a proper working CWM like the one from CM7
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
- Don't restore Apps using Titanium Backup!
[highlight]Flashing this rom MAY increase your binary counter and may/will void your warranty.[/highlight]
[size=+1]DOWNLOADS[/size]
Click to expand...
Click to collapse
Make sure you have read the entire post. There are bugs and caveats. This rom is a pre-Alpha release and not suitable for daily usage. It may even break your device. Please only flash it if you know what you're doing.
Build 01022012: http://bit.ly/icsnote_b1 [Multiupload] ODIN Version
Build 01022012: http://bit.ly/icsnote_b1_cwm [Multiupload] Flashable via CWM.
Additional Downloads
GApps v6: http://www.multiupload.com/JV91OI4HZ0
Samsung USB Drivers: http://www.mediafire.com/?8jq83u3xs6w8jou
Google USB Drivers: http://developer.android.com/sdk/win-usb.html
Changelog:
01-02-2012 Intial Release. Codename: FULLOFBUGS
[size=+1]SUPPORT[/size]
Click to expand...
Click to collapse
As this is a pre-Alpha release that contains a ton of bugs and unresolved issues there is no offical support by Team Hacksung and/or CM.
But there is a channel on the IRC where users can exchange their experience using this ROM. (ie. User2User Support)
http://webchat.freenode.net/?channels=icsnote
[size=+1]DEVELOPERS[/size]
Click to expand...
Click to collapse
AdamG-, atinm, codeworkx, coolya, guiper, mauimauer, nebkat, Unhelpful, xplodwild, yjwong, teamhacksung, the cyanogenmod-team. And many more...
[size=+1]SCREENSHOTS[/size]
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Happy new year!!
Hi there,
a few words on questions that came up so far:
There is screen flicker (ie. black lines) in some apps? Why is that?
Since we can't use the ICS 3.0.9 Kernel that leaked together with the XXKPx Builds for the SGS2 we can't use
the new ICS Graphics blobs which depend on the new kernel.
The Graphics blobs currently in use in the first build are the ones from Gingerbread and those are (which is pretty obvious if you aks me)
not fully compatible with ICS.
A quick workaround that might fix the screen flickering for some apps while breaking others is:
Go to Settings -> Developer options -> Tap "Force GPU rendering" (enabled).
There are issues with SD mounting (internal/external)
Already on my list for the next build along with working MTP)
Do I have to factory reset when going from this build to the next build?
Most certainly not. Since all releases are tested before release I'll let you know if there is something you need to do before upgrading.
Is this a Team Hacksung release?
Yes it is. I am maintaining the development for the Galaxy Note while working closely with codeworkx, nebkat, xplodwild et al.
Is it supposed to have a forum on CM website?
Nah. Since we are in pre-Alpha stage there is no support besides the IRC User channel mentioned in the first post.
Notes on progress:
* YouTube playback will return. (This is kinda flaky in the current build)
* I am taking a close look at the USB gadget driver and have begun work backporting the Android standard gadget driver to replace Samsung's messy gadget driver.
Sweet, looking forward to giving this a try.
Sent from my GT-N7000
Der Beginn einer neuen Ära !
The beginning of an new era
Is it also possible to flash with CWM? Will there be a CWM File too?
PS: Aachen? Ich auch ;D
Wow, that's a lot of stuff done already!
Wish I could try it, but I really really need camera support...
Thanks for your work
Waw, I love you Maui
I will give it a try this week end
Great News!... Thanks Dude
yeaaaa man !! yeaaaaaaaaaaaaaaaaaaa
best news...really excited
Nice one Maui, deserves front page coverage...
If you let me know your kernel github I'll have a look at the camera.
Submitting bug reports on experimental builds is the leading cause of male impotence.
Click to expand...
Click to collapse
Love it!
Sent from my GT-N7000 using xda premium
thanks, waiting for the release
Sent from my GT-N7000 using xda premium
Guys it specifically says on the OP do not post unless you have something valuable to say. Click the thank you button instead
Sent from my GT-N7000 using XDA App
ohhhhhhh
Brainstorming for saving the binary counter:
Shouldn’t it be possible to
- flash the kernel out of the archive using CWM Manager or Mobile Odin
- Boot direkt into Download Mode after flashing the kernel
- Flash the archive without kernel using Odin
Any comments on that?
BTW: Is ICS hardware acceleration working?
Very nice
There is any way to get or to build a CWM File?
Flashing using mobile Odin works a treat....
Don't forget you will probably need to fac reset...
Isn't it possible to use the camera driver from the galaxy s 2?
Sent from my GT-N7000 using XDA App
for those who want a flashable .zip, try this:
http://www.multiupload.com/AAQMT1BWL3 (new link)
(use only for testing, full wipe is required! you will loose all data)
( changed link with changed updater script, old is also working)
It's already smooth like butter
nice work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For
Motorola Photon
How To Flash
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
ROM file is located Located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:
AOKP Dev Team
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Atrix, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Alcapone263-for donating an Atrix coming to a home near me
Spleef-for collaborating on those first builds that got me into Android
All my testers and users
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse
Thanks...my flash finger has been getting itchy since I last did AOKPCB.
Reserved
Tapatalk 2 ile MB860 cihazımdan gönderildi
Download Link
Hi Th3Bill,
Thanks for this ROM.
Which one is the download link for this ROM?
Thanks.
bluegrass55 said:
Hi Th3Bill,
Thanks for this ROM.
Which one is the download link for this ROM?
Thanks.
Click to expand...
Click to collapse
Where it says all builds will be located here. That will redirect you to my page where I have the actual download link
Th3Bill said:
Where it says all builds will be located here. That will redirect you to my page where I have the actual download link
Click to expand...
Click to collapse
Thanks Th3Bill ,
Just found it my self.
In the excitement I wasn't concentrating.
I think we od'd joker's server.
MB860 Peace
Th3Bill said:
Where it says all builds will be located here. That will redirect you to my page where I have the actual download link
Click to expand...
Click to collapse
Bill .. jokersax.com is still in maintenance?
So if it's a port of AOKP build 40, it has the Linaro optimizations?
Nevermind. Checked the changelog on the AOPK website and saw this:
a note about linaro (warning, tech mumbo jumbo ahead)
These builds do NOT include the new Linaro optimizations. The optimizations don't increase the speed of Android by 100%, nor do they inject butter. They use a newer toolchain to compile Android, which has more optimizations. The Linaro people have also made the proper changes in Android code to allow builds to be compiled with -O3 instead of -O2 flags (think of it as another pass of code optimizations).
Please do not ask us whether we will include them in the future. We like speed as much as the next guy, but we want to make sure that it doesn't break ANYTHING. When/if it's ready, you'll know.
Enjoy!
Good to know, hopefully it will work out.
bill - why not throw a copy up on goo as a fail-safe?
I downloaded the zip
I selected the zip to install
When aroma starts up to select a language.. I can't select to the next page. I can scroll using the volume but power button doesnt select etc. Screen selection by touch doesn't work either. Any suggestions?
Joker's doing some work on the site.
Unfortunately, at work, my wifi is such that I can't connect to any ftp sites that use and ports 21, 2221, 22, 2222. that rules out my goo account.
For the touch issue, if you hit the search button on the bottom of your phone, you should be able to recalibrate Aroma inside the installer. Also from what I have heard, TWRP works best for Aroma on Atrix...can't test myself, as I have Photon.
xmontx said:
I downloaded the zip
I selected the zip to install
When aroma starts up to select a language.. I can't select to the next page. I can scroll using the volume but power button doesnt select etc. Screen selection by touch doesn't work either. Any suggestions?
Click to expand...
Click to collapse
Do you have a camera button on your phone?
So basically Th3Bill is your one stop shop for almost all rom's for the atrix.
Great work you are doing for the atrix community, much appreciated.
Sent from ..........
Well, soon enough I will be hopefully bringing yet another rom to Photon and Atrix.
I'm taking over a lot (not all) of Spleef's builds. AOKPCB I really don't know what the major difference is from AOKP, so I don't think I will do it. Paranoid will be the next project I work on. This build is based FULLY on CM9 libs. I avoided NONE of the previous "problem" libs, as most can be edited to work in the framework
I have my hand in 3 phones (Photon-my phone, Atrix, and Samsung Infuse) right now, and if Joker and I find anyone to donate a couple, will add the Nexus 7 to the list of devices
Th3Bill said:
Joker's doing some work on the site.
Unfortunately, at work, my wifi is such that I can't connect to any ftp sites that use and ports 21, 2221, 22, 2222. that rules out my goo account.
For the touch issue, if you hit the search button on the bottom of your phone, you should be able to recalibrate Aroma inside the installer. Also from what I have heard, TWRP works best for Aroma on Atrix...can't test myself, as I have Photon.
Click to expand...
Click to collapse
fortunately you have wifi at work - i just realized when you listed out the port numbers, bluecoat over here would prevent it from going out the door.
How many times have I said, you're the man!
hkjr said:
fortunately you have wifi at work - i just realized when you listed out the port numbers, bluecoat over here would prevent it from going out the door.
Click to expand...
Click to collapse
That's why I love hosting on Joker's site...no port num
For some reason, I can only get to like 8mb in the download and it'll stop. This is probably the third time.
Sent from my MB860 using Tapatalk 2
No camera button that I know of. I have the power and volume physical buttons then menu home back and search touch button. None work to get me past the language selection.
NOTICE:
As of 6/1/2013 the builds on this thread are superceded by nightly builds from CyanogenMod.
Noobnl is your official CM maintainer and any issues with nightlies should be addresed to him.
Please go here for latest builds and thread:
http://forum.xda-developers.com/showthread.php?t=2304936
Remaining thread and posts are retained for documentation purposes only.
DISCLAIMER:
Your device, your responsibility. I am not liable for anything you flash, including this.
As a result you'll probably want to read the rest of the thread and at least be aware of what you're flashing.
You've been warned.
CyanogenMod 10.1 RC1 for SPH-L720 (jfltespr) - UNOFFICIAL
Features:
This is CyanogenMod as it is provided in the source repos. I will be keeping it as such.
Any modifications, enhancements, etc. will be brought in and supported through their Gerrit review process.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Build: 5/31 Repo Sync, Clean Build. Final build before nightly builds start on CM site.
Tar/ZIP Mirror: [ROM][BETA][UNOFFICIAL]CM 10.1 for SPH-L720 (Team SXTP Site)
Both contain a kernel and ROM. Latest GApps here courtesy Goo.im. Make sure to use the latest please.
Flash Instructions:
1) Back up your current system and all data if desired.
2) In your favorite custom recovery, wipe data, cache and dalvik.
If you want to flash the ZIP version you'll need to format system as well.
3) TAR - Boot to Odin Mode and flash via Odin.
ZIP - Flash ZIP in recovery
4) Flash GApps
Summary Changelog:
Code:
Unofficial Beta Final (5/31/13) - RC3 tags, includes noobnl's hard work to rewrite the RIL class.
Beta 6 (5/10/13) - Contains RC1 tags. Just mainly FYI.
Older Changes:
Beta 4 (5/7/13 11:30 am CT) - Update defconfig and add commit from noobnl to remove clutter in device tree.
Beta 3 (5/7/13): Contains temporary fix that Beta 2 was supposed to have. Resolves inbound calls, hang up issue.
Beta 1 (5/5/13): Re-sync and rebuild from clean after Prealpha 15 booted successfully.
Prealphas 1-15 (4/29-5/5/13): Device Bringup to get adb/boot
Source:
CyanogenMod Official Repositories
Device Dependencies:
android_device_samsung_jf-common
android_device_samsung_msm8960-common
android_device_samsung_qcom-common
CM Sprint GS4 Device Repository
Sprint GS4 Device Repository
NOTE: Due to potential copyright issues I do not include a vendor repo.
You can extract the files from the phone or ROM as needed - should you decide to build on your own.
Credits:
Early Bringup Advice: Entropy512, Shabbypenguin, Cordell12
Current Mentor/Collaborator: Noobnl (CM CDMA Maintainer)
If it's working this well, chances are he's had a big hand in it!
Testers: Mohogalore, robbyamor, crawj and others
Steve Kondik (Cyanogen) for CM development and jf common work
The CM maintainters who continue to improve CM along with Mr. Kondik
...and of course! You, the community, for your support as well! Thank you!
Known Issues
GPS - Sometimes doesn't lock. Current suggestion is ensure you get a lock in stock ROM before flashing.
Reboot - Extended reboot menu will power the phone off.Issues not identified by our build but possibly pertaining to it can be found on jira.cyanogenmod.org
Will flash shortly after my other task is complete!
WOW! That was fast
CM 10.1 within days of release
Just a quick question, would this feasibly work on US Cellular like the gs2 + gs3 roms did with some basic edits to the apns, eri.xml, and build.prop? Obviously this is not in flashable form just a simple innocent question.
Thanks,
nothingblooms
five40 said:
WOW! That was fast
CM 10.1 within days of release
Click to expand...
Click to collapse
Don't get too happy yet. Still doesn't boot.
Sent from my SPH-L900 using Tapatalk 2
nothingblooms said:
Just a quick question, would this feasibly work on US Cellular like the gs2 + gs3 roms did with some basic edits to the apns, eri.xml, and build.prop? Obviously this is not in flashable form just a simple innocent question.
Thanks,
nothingblooms
Click to expand...
Click to collapse
Not sure yet. I'll send you a pm.
Sent from my SPH-L900 using Tapatalk 2
As Mario would say: Mamamia!
He also would say 'lets a go!'
Edit:
What's the link to our device branch?
Sent from my EVO using xda app-developers app
So... I realized something rather dumb on my part today.
I've been having you guys test just the ROM. Didn't dawn on me you probably need a boot.img because the ramdisk has probably changed, even if the kernel didn't.
Give me a few to get something together.
Looks like I found the ROM I'll be flashing in a month when i upgrade.
Edited - removed the next test. Wrong image name.
Work on hold pending Cyanogen's repo update. According to him it's fully working on T-mo so shouldn't be long before we have it working on Sprint.
New builds based on Cyanogen's versions just uploaded.
Need someone to test and provide feedback ASAP please!
Flashed the rom and gapps with latest Alpha9 recovery.
Rom tries to boot with an all black screen with red notification light. The touch buttons light up but no boot.
Sent from my SPH-L720 using xda premium
Unknown_Hero said:
Flashed the rom and gapps with latest Alpha9 recovery.
Rom tries to boot with an all black screen with red notification light. The touch buttons light up but no boot.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Sounds like downloads from rwilco12.com are buggy. Can you redownload from new mirror and try again?
Sent from my SPH-L900 using Tapatalk 2
Yeah same as before, will wait for update.
Sent from my SPH-L720 using xda premium
Can stop testing that one. Found a few major bugs in changing from gsm to cdma. Rebuilding and will repost in a few hrs.
Sent from my SPH-L900 using Tapatalk 2
Prealpha 9 posted.
Sent from my SPH-L900 using Tapatalk 2
garwynn said:
Prealpha 9 posted.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Same as before. No boot, just hangs at black screen with touch buttons lit up.
Unknown_Hero said:
Same as before. No boot, just hangs at black screen with touch buttons lit up.
Click to expand...
Click to collapse
Dang it! I need to find out what's causing this.... :banghead: :banghead:
I'll see if someone can get into ADB and/or send me the logs.
-*UNOFFCIAL*-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions
Update Recovery
Factory reset (If coming from different ROM or Stock)
Install ROM here Oct-27
Install GAPPS here Official PA Gapps *Thanks to stephtban for the redirect
Optional: Wipe Caches
Reboot
Enjoy!
**As it stands now PA 4+ updates do not require factory reset
Extras
Kernel is built with Linaro 4.8.4 toolchains
ROM is built with SaberMod 4.8.4 toolchains
Dynamic Status Bars are in and working currently broken **warning may cause battery to run down faster than usual
Tabbed recents
What is not working
Lightbulb (torch for CM users) system app
Everything else works (GPS, WiFi, LTE, Music, Camera)
If it is broken please let me know
Old Builds
Oct-28 here **This an OTA** PA 4.6 Beta 5 w/DSB & tabbed recents
Oct-27 here PA 4.6 Beta 5 with DSB
Oct-20 here PA 4.6 Beta 5
Sep-17 here
Aug-11 here *Lightbulb not working
Many thanks to the following
somcom3x -helping with the groundwork for all of this
shabbypenguin -helping with the groundwork without owning the device
dhacker29 -if you don't know how much work he does with moto devices look him up!
JimYoung - thanks for the leads on the PA stuff to integrate
PA Team
CM team
Hashcode
If you feel so inclined and appreciate my work, track those people down and donate to them!
If I am forgetting you I apologize
PA Change Log here
PA-legacy GitHub here
Gerrit here
**Still a work in progress, please bear with me
Reserved
Just a place holder
Everything works like expected. Ty for opening a thread for this! Hopefully we get the ne sdcard fix working. After this I will switch completly over to the Moto G. For now its just a 2nd device.
http://forum.xda-developers.com/moto-g/general/moto-g-lte-4-4-4-xt1039-ota-update-21-t2847104
Some apps for example, SoundCloud and MusiXmatch have some serious lag in usability of the app and volume control. However Google Play and Poweramp seem to be fine.
Please can you update to latest PA source? And add option for edit navbar (size only). Ahh! This option is missing in the rom, you can add?
The ROM is smooth and faster, no have important bugs, good work man!
My apologies for the lack of an update. Work has gotten unexpectedly busy, will sync sources this morning (I work late nights) and try to get a build out later today (5 or 6 pm EST)
obsolete1 said:
My apologies for the lack of an update. Work has gotten unexpectedly busy, will sync sources this morning (I work late nights) and try to get a build out later today (5 or 6 pm EST)
Click to expand...
Click to collapse
Don't worry, this ROM is NOT a obligation only a hobby Take all time you need
First build of Beta2 has boot loop issues so having a working built today may not go as planned
UPDATE: Beta 2 build finally boots....but wifi not working but I got Lightbulb (torch) to work. Found the issue (wifi module not present) making new build now :good:
hey can someone help with this rom
i keep getting an error whenever i install any rom on this moto g lte xt1045.
Everything is fine until i reboot then i get this error "unfortunately the process com.android.phone has stopped"
every rom i tried does this same thing after i reboot
marc206 said:
hey can someone help with this rom
i keep getting an error whenever i install any rom on this moto g lte xt1045.
Everything is fine until i reboot then i get this error "unfortunately the process com.android.phone has stopped"
every rom i tried does this same thing after i reboot
Click to expand...
Click to collapse
Have you tried any of these things link
Side note might be dropping this project, made a test build of LiquidSmooth (no wifi & no camera) and I like it a lot better so I may be focusing my efforts there.
obsolete1 said:
Have you tried any of these things link
Side note might be dropping this project, made a test build of LiquidSmooth (no wifi & no camera) and I like it a lot better so I may be focusing my efforts there.
Click to expand...
Click to collapse
Well thanks for the help I Judy got it my stock room was 4.4.3 and I needed to update. I also did that link before you posted and it did work. But it could have been both. Kitkat is so sick with a phone that can handle it. I'm coming from obsolete droids and my last one had kitkat but that's all it could run because of resources.
marc206 said:
Well thanks for the help I Judy got it my stock room was 4.4.3 and I needed to update. I also did that link before you posted and it did work. But it could have been both. Kitkat is so sick with a phone that can handle it. I'm coming from obsolete droids and my last one had kitkat but that's all it could run because of resources.
Click to expand...
Click to collapse
My last phone was a g2x...develpment stopped on that with gingerbread. One of the first dual core phones in the us and no support from LG, made for some upset people. But they did with a class action suit against LG because of it.
Does anyone else have a problem with GPS? My actual GPS does not seem to work.
Sent from my unknown using XDA Free mobile app
Can I move apps to SD?
UPDATE: new build
ALL CREDIT GOES TO: nowrep (He can't post reply, because he has a new account on XDA)
"I made a new build for myself today. Everything seems working fine so far."
DOWNLOAD ROM (4.6-beta2)
usrbowe said:
I made a new build for myself today. Everything seems working fine so far.
DOWNLOAD ROM (4.6-beta2)
Click to expand...
Click to collapse
I don't know much but about PA, but does it include the feature which lets the Navbar's color adapt to the currently open app?
Zyquil said:
I don't know much but about PA, but does it include the feature which lets the Navbar's color adapt to the currently open app?
Click to expand...
Click to collapse
I couldn't find it anywhere
usrbowe said:
I couldn't find it anywhere
Click to expand...
Click to collapse
It's mentioned here, just not sure if it's implemented at the latest one.
As we just did a little update a few days ago, the change log is not that long for this version bump, but here goes:
Introduce Dynamic System Bars
Introduce the swipe-up gesture to dismiss Hover
Get rid of possible slowness during I/O on the stock kernel for hammerhead
http://forum.xda-developers.com/showpost.php?p=55194330&postcount=53
I know, but I wasn't able to find where I can activate this. And currently I have different ROM on my phone.
Zyquil said:
It's mentioned here, just not sure if it's implemented at the latest one.
As we just did a little update a few days ago, the change log is not that long for this version bump, but here goes:
Introduce Dynamic System Bars
Introduce the swipe-up gesture to dismiss Hover
Get rid of possible slowness during I/O on the stock kernel for hammerhead
http://forum.xda-developers.com/showpost.php?p=55194330&postcount=53
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From deep within the Team Nocturnal Derp Cave
From the dark side of the moon, and the cushions of our couches
I present
For Sprint cdma M7
Built from CM-11 source
Text
Data
Service
GPS
MMS
Internal/External SDcard mounting
Camera
Video
recording
Call
Audio
WiFi
Google Now
Bluetooth
Video playback
Audio playbackRf
blaster
home screen rotation
tweeks, mods etc...
Bugs
Anything already present in CM Source
Q.Do I need to be rooted
A. Yes with a custom recovery
Q.Is this rom rooted
A.yes
-Home screen rotation
-Active Display*
-Floating Windows
-Call Recording Option unlocked
-Build.prop edits for Battery Saving and Efficiency
https://github.com/CyanogenMod]cm github
https://github.com/GruesomeWolf]Our Mods
9/27/14
first release
9/28
added screen rotation
up to date with cm source
10/12
Active Display
Call Recording
Floating Window
Fixed APN's being overwritten
Built with latest GCC 4.8 Toolchains
Full -O2 Flags
Im sure theres much more Im forgetting
10/15
Up to date with CM's changes
Enabled Lockscreen Rotation Settings (Settings/Display/Rotation)
Built with Linaro 4.8 GCC
10/24
Added Slim Heads-Up
10/27
Added PA's Dynamic System Bars
10/31
Added in BMFR OTA will now check for Nightly TN builds Not CM (Note Nightly does not mean we will be building EVERY night. Its simply that these builds are not labled STABLE. Please do not expect an update every night. Thanks)
Settings now has a TN section where we added all of our not typically found in CM additions.
Added a Power Tile to Quick Settings
11/01
fixed fc when pressing power button when power menu was open.
11/02
updated to latest cm source,
added in about us app in the settings under the TN BMFR add on section.
removed the the cm change log in about phone.
-mrjaydee82
-Benbailey84
-GruesomeWolf
-JamieG
-ChongoDroid
-XsMagical
-BigToysRock
-Billbowers
-Vinman12
A Special Thanks To
XsMagical
Bill bowers
GW
CM for source
To all that contribute to the source.
and to all my testers.
How to Flash
Update to the latest TWRP or CWM recovery
Download The Rom place on your ext sd
make a nandroid of course
full wipe except your ext sd card
flash Rom in recovery
flash gapps in recovery
rebootenjoy.
let phone settle in for few min or so to build
Download TN BMFR M7spr
11/03 (Latest build!)
MD5 135f48cdfef915bb292dedae5638e0ba
Please post any bugs you find it will help the process, any logcats will be greatly appreciated. Ty
Hey say thanks
XDA:DevDB Information
TN's BMFR Project, ROM for the Sprint HTC One
Contributors
gruesomewolf, GruesomeWolf, vinman12
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2014-10-13
Last Updated 2014-10-12
Mine just in case
Nice rom, runs smooth and Im loving the mods.
data,gps etc.. all work great.
huge thanks to GW for this.
1st! lol
Ah, my favorite Rom'er!
I'll give this a try!
what gapps are recommended for this rom
nvm: I found them on TN site
Download Link down
Ty, working on site now should be up soon
Edit, its up
Looks prety nice...
How's this running for everyone??
Haven't had a chance to flash your Rom yet cause of life on life's terms but as soon as I do I'll be sure to let you know if I come across anything and my experience. Liking forward to flashing this. Just haven't had time.
Sent from the OG HTC One.
I'm not able to receive MMS. Anyone else?
wintz said:
I'm not able to receive MMS. Anyone else?
Click to expand...
Click to collapse
Nope..... working fine here
Any ideas? Just has my phone replaced and had to re soff and unlock. Do you know latest radio?
wintz said:
Any ideas? Just has my phone replaced and had to re soff and unlock. Do you know latest radio?
Click to expand...
Click to collapse
Here is a link to radio thread....let me know how that works out for ya
http://forum.xda-developers.com/showthread.php?t=2406330
gruesomewolf said:
Here is a link to radio thread....let me know how that works out for ya
http://forum.xda-developers.com/showthread.php?t=2406330
Click to expand...
Click to collapse
Flashing latest radio solved this problem for me. I should've thought of that myself, but thanks!!
nathantaylor said:
Flashing latest radio solved this problem for me. I should've thought of that myself, but thanks!!
Click to expand...
Click to collapse
Good news.... Will add the fact that the latest radio is required to the op...:thumbup:
Thanks for the feedback
Great ROM so far. Smooth clean and all items in OP work as stated. Nice work Team Noc. :good:
One issue with a game. Puzzles and Dragons is broke. I saw this in another thread recently too (OnePlus CM11s port ROM post #148). Since I saw this in other ROMs i assume it is CM based issue. Game is ftp. Can someone confirm or deny my silly accusation?
thanks
jllbenson said:
Great ROM so far. Smooth clean and all items in OP work as stated. Nice work Team Noc. :good:
One issue with a game. Puzzles and Dragons is broke. I saw this in another thread recently too (OnePlus CM11s port ROM post #148). Since I saw this in other ROMs i assume it is CM based issue. Game is ftp. Can someone confirm or deny my silly accusation?
thanks
Click to expand...
Click to collapse
Are you referring to this game
https://play.google.com/store/apps/details?id=jp.gungho.padEN
If so.... Then yeah. I can't get past the downloading data stage. It downloads the data, but as soon as it finishes it goes right back to downloading data again. But seems like that would be a bug that the game developers would have to fix.... Since I don't have that issue with any other games that require a data download.
gruesomewolf said:
Are you referring to this game
https://play.google.com/store/apps/details?id=jp.gungho.padEN
If so.... Then yeah. I can't get past the downloading data stage. It downloads the data, but as soon as it finishes it goes right back to downloading data again. But seems like that would be a bug that the game developers would have to fix.... Since I don't have that issue with any other games that require a data download.
Click to expand...
Click to collapse
Yep correct game. Sorry should have posted link... Unfortunately I get the same results. Guess I got to roll back to an earlier CM build. Grassyass.
jllbenson said:
Yep correct game. Sorry should have posted link... Unfortunately I get the same results. Guess I got to roll back to an earlier CM build. Grassyass.
Click to expand...
Click to collapse
You may want to also report the bug to the game developer, as again this sends to be the only game that has to download data that displays this issue.