NOTICE:
As of 6/1/2013 the builds on this thread are superceded by nightly builds from CyanogenMod.
Noobnl is your official CM maintainer and any issues with nightlies should be addresed to him.
Please go here for latest builds and thread:
http://forum.xda-developers.com/showthread.php?t=2304936
Remaining thread and posts are retained for documentation purposes only.
DISCLAIMER:
Your device, your responsibility. I am not liable for anything you flash, including this.
As a result you'll probably want to read the rest of the thread and at least be aware of what you're flashing.
You've been warned.
CyanogenMod 10.1 RC1 for SPH-L720 (jfltespr) - UNOFFICIAL
Features:
This is CyanogenMod as it is provided in the source repos. I will be keeping it as such.
Any modifications, enhancements, etc. will be brought in and supported through their Gerrit review process.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Build: 5/31 Repo Sync, Clean Build. Final build before nightly builds start on CM site.
Tar/ZIP Mirror: [ROM][BETA][UNOFFICIAL]CM 10.1 for SPH-L720 (Team SXTP Site)
Both contain a kernel and ROM. Latest GApps here courtesy Goo.im. Make sure to use the latest please.
Flash Instructions:
1) Back up your current system and all data if desired.
2) In your favorite custom recovery, wipe data, cache and dalvik.
If you want to flash the ZIP version you'll need to format system as well.
3) TAR - Boot to Odin Mode and flash via Odin.
ZIP - Flash ZIP in recovery
4) Flash GApps
Summary Changelog:
Code:
Unofficial Beta Final (5/31/13) - RC3 tags, includes noobnl's hard work to rewrite the RIL class.
Beta 6 (5/10/13) - Contains RC1 tags. Just mainly FYI.
Older Changes:
Beta 4 (5/7/13 11:30 am CT) - Update defconfig and add commit from noobnl to remove clutter in device tree.
Beta 3 (5/7/13): Contains temporary fix that Beta 2 was supposed to have. Resolves inbound calls, hang up issue.
Beta 1 (5/5/13): Re-sync and rebuild from clean after Prealpha 15 booted successfully.
Prealphas 1-15 (4/29-5/5/13): Device Bringup to get adb/boot
Source:
CyanogenMod Official Repositories
Device Dependencies:
android_device_samsung_jf-common
android_device_samsung_msm8960-common
android_device_samsung_qcom-common
CM Sprint GS4 Device Repository
Sprint GS4 Device Repository
NOTE: Due to potential copyright issues I do not include a vendor repo.
You can extract the files from the phone or ROM as needed - should you decide to build on your own.
Credits:
Early Bringup Advice: Entropy512, Shabbypenguin, Cordell12
Current Mentor/Collaborator: Noobnl (CM CDMA Maintainer)
If it's working this well, chances are he's had a big hand in it!
Testers: Mohogalore, robbyamor, crawj and others
Steve Kondik (Cyanogen) for CM development and jf common work
The CM maintainters who continue to improve CM along with Mr. Kondik
...and of course! You, the community, for your support as well! Thank you!
Known Issues
GPS - Sometimes doesn't lock. Current suggestion is ensure you get a lock in stock ROM before flashing.
Reboot - Extended reboot menu will power the phone off.Issues not identified by our build but possibly pertaining to it can be found on jira.cyanogenmod.org
Will flash shortly after my other task is complete!
WOW! That was fast
CM 10.1 within days of release
Just a quick question, would this feasibly work on US Cellular like the gs2 + gs3 roms did with some basic edits to the apns, eri.xml, and build.prop? Obviously this is not in flashable form just a simple innocent question.
Thanks,
nothingblooms
five40 said:
WOW! That was fast
CM 10.1 within days of release
Click to expand...
Click to collapse
Don't get too happy yet. Still doesn't boot.
Sent from my SPH-L900 using Tapatalk 2
nothingblooms said:
Just a quick question, would this feasibly work on US Cellular like the gs2 + gs3 roms did with some basic edits to the apns, eri.xml, and build.prop? Obviously this is not in flashable form just a simple innocent question.
Thanks,
nothingblooms
Click to expand...
Click to collapse
Not sure yet. I'll send you a pm.
Sent from my SPH-L900 using Tapatalk 2
As Mario would say: Mamamia!
He also would say 'lets a go!'
Edit:
What's the link to our device branch?
Sent from my EVO using xda app-developers app
So... I realized something rather dumb on my part today.
I've been having you guys test just the ROM. Didn't dawn on me you probably need a boot.img because the ramdisk has probably changed, even if the kernel didn't.
Give me a few to get something together.
Looks like I found the ROM I'll be flashing in a month when i upgrade.
Edited - removed the next test. Wrong image name.
Work on hold pending Cyanogen's repo update. According to him it's fully working on T-mo so shouldn't be long before we have it working on Sprint.
New builds based on Cyanogen's versions just uploaded.
Need someone to test and provide feedback ASAP please!
Flashed the rom and gapps with latest Alpha9 recovery.
Rom tries to boot with an all black screen with red notification light. The touch buttons light up but no boot.
Sent from my SPH-L720 using xda premium
Unknown_Hero said:
Flashed the rom and gapps with latest Alpha9 recovery.
Rom tries to boot with an all black screen with red notification light. The touch buttons light up but no boot.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Sounds like downloads from rwilco12.com are buggy. Can you redownload from new mirror and try again?
Sent from my SPH-L900 using Tapatalk 2
Yeah same as before, will wait for update.
Sent from my SPH-L720 using xda premium
Can stop testing that one. Found a few major bugs in changing from gsm to cdma. Rebuilding and will repost in a few hrs.
Sent from my SPH-L900 using Tapatalk 2
Prealpha 9 posted.
Sent from my SPH-L900 using Tapatalk 2
garwynn said:
Prealpha 9 posted.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Same as before. No boot, just hangs at black screen with touch buttons lit up.
Unknown_Hero said:
Same as before. No boot, just hangs at black screen with touch buttons lit up.
Click to expand...
Click to collapse
Dang it! I need to find out what's causing this.... :banghead: :banghead:
I'll see if someone can get into ADB and/or send me the logs.
Related
I’ve been compiling some Cyanogenmod 9 builds for my tab recently and I've decided to share them here. The Cyanogenmod project is still under heavy development, so there will be bugs. Although I will be testing the wifi builds before I post them I may not be able to catch all bugs before I release the build; install these builds at your own risk and be aware of what you are doing. I take no responsibility for any damage caused by these builds. If I notice small bugs while testing I will make a note of them with the release. I plan on updating these builds every 3 days.
I am fairly new to the Android scene, so please provide feedback if you feel that I could be doing something better.
Thanks to:
The Cyanogenmod team and pershoot- This is their work, I am simply compiling their code.
RootzWiki - Providing gapps packages
Changelogs:
If there are major changes I will try to note them along with the builds, but for all other changes refer to the Cyanogenmod code review system: http://review.cyanogenmod.com/#q,status:merged,n,z
For gapps changelogs, refer to the RootzWiki gapps page: http://wiki.rootzwiki.com/Gapps
Builds:
2012.05.11
ROM:
Mirror 1: http://d-h.st/XIP
Mirror 2: http://ge.tt/4Llv4ZH/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 8e32a8b85babc703cbd04492096c8a92
2012.04.30
ROM:
Mirror 1: http://d-h.st/rTw
Mirror 2: http://ge.tt/46YIw2H/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 470c7de00e2d20a79c1491d73f3c7aac
2012.04.27
ROM:
Mirror 1: http://d-h.st/yOi
Mirror 2: http://ge.tt/9pq9LxG/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 54b269e017db71150f7631f6e6aac47f
Instructions:
1. Make a nandroid backup and save it in a safe place.
2. Wipe data, cache, and dalvik cache.
3. Install ROM zip in CWM.
4. Install GAPPS zip in CWM.
5. Reboot
Note: A wipe is probably not required for every single build, but it can't hurt. Make sure you make a backup even if you don't wipe.
A Youtube apk can be found here: http://forum.xda-developers.com/showthread.php?t=1529715
If you enjoy these builds, you may wish to make a donation:
Cyanogenmod - http://www.cyanogenmod.com/ - See bottom of page
Me - https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
will test it tomorrow. Thank you!
for some odd reason when i click on ROM download link, i get this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
badboy47 said:
will test it tomorrow. Thank you!
for some odd reason when i click on ROM download link, i get this...
Click to expand...
Click to collapse
Thanks! I look forward to hearing the results. The filehosting site I'm using might have been flagged by ESET for some reason. In fact, the reason I didn't use devhost is because I use the same security software and I've had this exact same problem with them. It should work if you temporarily disable virus protection, I assure you that there's nothing malicious in these files If it's still causing problems I'll re-host the files somewhere else tomorrow.
out of curiousity, what's different about this ROM than the other (supposedly...) nightly builds here? Regardless, thanks!
slack04 said:
out of curiousity, what's different about this ROM than the other (supposedly...) nightly builds here? Regardless, thanks!
Click to expand...
Click to collapse
They are all built from the same code so the only real difference is update frequency. The other kangs tend to update every 1-2 weeks so they may be more well tested; I'm aiming to provide something more cutting edge. The builds listed as "nightly" are referring to an official snapshot Cyanogen posted earlier this month, it hasn't been updated and seems to have been pulled from the download site as well.
EDIT: FIXED
Sent from my SGH-I997 using xda premium
When Cyanogen team pushed out the 2 nightlies for the tab they pushed one for P4wifi and one for P4tmo and the one for P4tmo could be used on P4(GT-P7500). So my question is, can we use the one for Verizon LTE also or is there any hardware diffrence between P4tmo and Verizon device?
nickwarn said:
When Cyanogen team pushed out the 2 nightlies for the tab they pushed one for P4wifi and one for P4tmo and the one for P4tmo could be used on P4(GT-P7500). So my question is, can we use the one for Verizon LTE also or is there any hardware diffrence between P4tmo and Verizon device?
Click to expand...
Click to collapse
I'm not entirely sure, but my guess is that there is probably a hardware difference. I would suggest trying this build: http://forum.xda-developers.com/showthread.php?t=1461240. I will try to post a p4tmo build next time but I won't be able to test it myself.
Coffeebeans said:
I'm not entirely sure, but my guess is that there is probably a hardware difference. I would suggest trying this build: http://forum.xda-developers.com/showthread.php?t=1461240. I will try to post a p4tmo build next time but I won't be able to test it myself.
Click to expand...
Click to collapse
Ok, i stay of it then. But it sure is tempting to try. When we used Tmo build on P4 we just had to change updater script and it was fully functional with 3G.
not to be the annoying brat here, but are the camera functionalities fixed yet?
martyr2k6 said:
not to be the annoying brat here, but are the camera functionalities fixed yet?
Click to expand...
Click to collapse
No camera in any ICS ROM until Samsung releases their code. None. Not going to happen. Period. Stop asking.
I think there is a problem with ICS rom on my LTE tab. It doesn't matter which roms i tried, i always have the battery drain issue ( due to system awake during standby mode.)
- I did format data/wipe cache + davik before flashed the rom.
- Auto sync on except for picture
- Other apps i use which are running in backgound are Hd widget, wizz widget , friendcaster, Battery monitor widget. These are the same app i use when i running 3.2 twz rom ( battery drain about 20-30 mAh. With ICS rom, it is 170-180mAh).
=>Does anyone know how i can solve this problem? Thank in advance!
Just a quick update on what's going on:
Pershoot has posted new builds in the other kang threads; these builds contain new library files as well as kernel updates. You may want to check out the updated CWM recoveries he has built as well. I'll be building these new libraries into my builds starting with the next one. If the kernel updates aren't merged into cyanogenmod at the time of the next build I'll build a kernel as well. I've also decided to leave the 3G and LTE builds to other developers for the time being, since I don't have the hardware to test them it's hard to keep up with updates and issues.
Since I updated I cannot be my tab to connect to my windows pc any ideas?
Simpson8 said:
Since I updated I cannot be my tab to connect to my windows pc any ideas?
Click to expand...
Click to collapse
Go to Settings > Storage > Menu button at top-right of screen> USB computer connection > Select MTP
Great! I've been using the builds from rootzwiki since they get updated frequently. Might switch to these since I visit here daily.
New build is up. Enjoy!
Is this ice cream sandwich? I wasn'tsure
mvaughn12 said:
Is this ice cream sandwich? I wasn'tsure
Click to expand...
Click to collapse
Yes, it is.
trying to download keep saying daily limit reached
ALL credit for this ROM goes to bkjolly and the PacMan Devs
This ROM requires an unlocked bootloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a port bkjolly has been doing from
the PACMan rom he in no way developed this rom
he ported it to work with this specific device with
the help of Dhacker and Hashcode.
All credit for the rom is the PACMan devs alone.
As well as this thread if you look at the bottom of the page you will find
the OP that was created at xda and this was copied from.
Description
After months of work, the long awaited PACman 4.2 rom is ready for public
released. This is still work in progress WIP and there are many missing
parts. Though the rom is rock stable for average users. We are working
on it daily to fill the missing parts.
Now what is PACman? The idea was to remove the need for a hunt of rom and
cure flasholicsm by providing everything xda has in rom development in a
single bloat free rock stable rom. This is the FIRST rom of its kind
with a hybrid framework consisting on cm10.1, AOKP and AOSPA. What makes
PACman unique is this perfect blend of all of these. Be informed PACman
is not a "git cherry-pick blahblah yeee i am a dev donatezzz me" rom.
It took a LOT of work of thinking behind to merge the frameworks in the
right order.
Features
Hybrid Framework
CM10.1
AOKP MR1
AOSPA 3.00
Per App DPI
Per App Color
Pie Controls
Open Source Camera HAL
cLock
Hardware Key Control
Any Widget on lockscreen
CM Profiles
Lock Screen Shortcuts
Lock Screen ring target
Fresh compiled CM10.1 kernel
Init.d Support
Everything cant be listed here go check it out
A LOT more to come
Recommended Installation Procedure
Coming from another Custom ROM:
Wipe Data/Factory Reset (This does not affect your Internal/External storage)
Format /System (This does not affect your Internal/External storage)
Flash ROM
Flash Gapps
Wipe Cache
Wipe Dalvik Cache
Reboot
Updating from previous version [only for 4.2.x]:
Flash ROM
Flash Gapps
Wipe Cache
Wipe Dalvik Cache
Reboot
Download:
http://droid-hive.com/index.php?/topic/1913-romport-pac-man-rom-422-by-bkjolly-gsm/
Credits
szl.kiev and Team
CyanogenMod Team
AOKP
Paranoid Android
[vertigo]
epinter
Hashcode
DHacker
Mobijew
Show Support wear the PACman signature
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1978991
You are responsible for what you do with your device.
Reserved.
Downloading.. So excited
Edit: Works great, fast and smooth. Same bugs of AOKP and CM 10.1 (camera recorder)
Camera should work. Camcorder doesn't right now. I don't have the XT925 but camera works on XT926 version.
Sent from my XT926 using Xparent Cyan Tapatalk 2
The 4G Works or just the GSM?
Both.
Sent from my XT926 using Xparent Cyan Tapatalk 2
once i recover my HD from the Service i'll try this rom first
I may have been confused by your question lol. GSM and 4g, what did you mean by that? If you have a XT926 then you want the other pacman thread.
Sent from my XT926 using Xparent Cyan Tapatalk 2
Development on this ROM is over and this thread can now be removed.
Sent from my XT926 using Xparent Cyan Tapatalk 2
GoClifGo05 said:
Development on this ROM is over and this thread can now be removed.
Sent from my XT926 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Hi, just a question, the ROM will be dead or just leave for a while, because is a great job what you've done here T.T
Bjkolly ported the ROM. There was a disagreement but I THINK he has decided to continue working on this eventually.
Sent from my XT926 using Xparent Cyan Tapatalk 2
well i'll se if i can get the rom with a friend that test it the other day, and i´ll be waiting, because this is a really good job, thanks for let us taste it ;D
If you guys haven't seen, I'm doing PACman for the Atrix HD from source. I've been doing a bit of experimenting with toolchains, compiler versions, etc, but I'm almost done with that and when I am I'll start making builds for you guys as well as the rest of the Razrqcom family. Not an eta, but I'd like to have the Razrqcom builds by Sunday.
I have to look into why building the system image fails with gcc 4.7, errors out on e2fsck with bad inode size -- other than that, everything builds with 4.7, and since 4.7 & 4.8 is the future I'd like to get it working....I might just revert back to gcc 4.6 since it works. Once I finish messing with that I'm going to look into compiling a custom toolchain for us -- I've seen threads where they've compiled the toolchain to be more optimized for their particular platform and I'd like to look into that, after that I'll start on builds for you guys.
Pacman is back up on DH.New build... It wasn't actually posted by bk so I'm not sure if its being maintained by him, but credit is definitely given.
Sent from my XT926 using Tapatalk 2
The ROM is posted on droid-hive again. Bk is back to work.
Sent from my XT926 using Xparent Cyan Tapatalk 2
wturner859 said:
Pacman is back up on DH.New build... It wasn't actually posted by bk so I'm not sure if its being maintained by him, but credit is definitely given.
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I am maintaining it I just Ran 12 builds yesterday and didn't have time to post.
bkjolly said:
Yeah I am maintaining it I just Ran 12 builds yesterday and didn't have time to post.
Click to expand...
Click to collapse
Nice.
Sent from my XT926 using Tapatalk 2
Seems like droid-hive is down. Anyone know where to get this rom?
Droid hive is up for me...
GoClifGo05 said:
Droid hive is up for me...
Click to expand...
Click to collapse
link to the post please:laugh:
DISCLAIMER:
Your device, your responsibility. I am not liable for anything you flash, including this.
As a result you'll probably want to read the rest of the thread and at least be aware of what you're flashing.
You've been warned.
Android Open Source Paranoid Android for SPH-L720 (jfltespr) - OFFICIAL (HALO)
Features:
This is AOSPA as it is provided in the source repos. I will be keeping it as such.
Only deviations are to allow it to build properly and are generally from CM repos.
Any modifications, enhancements, etc. will be brought in and supported through their Gerrit review process.
(At the moment as I cannot reach their Gerrit I'm doing Github pull requests instead.)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Build: Official (7/1/2013) - Now includes HALO. Official Status granted by Gokussjx.
Tar/ZIP Mirror: [ROM][UNOFFICIAL]AOSPA 3.6x for SPH-L720 (Team SXTP Site)
Both contain a kernel and ROM. Latest PA GApps here courtesy Rootzwiki. (Use latest version)
CM Gapps seems to get camera to stop FCing but do so at your own risk.
Flash Instructions:
1) Back up your current system and all data if desired.
2) In your favorite custom recovery, wipe data, cache and dalvik.
If you want to flash the ZIP version you'll need to format system as well.
3) TAR - Boot to Odin Mode and flash via Odin.
ZIP - Flash ZIP in recovery
4) Flash GApps
Summary Changelog:
Code:
Unofficial (6/11/13) - Updated to 3.60, includes the open source release of HALO.
Unofficial (6/5/13) - Updated to 3.56 and remove Beta tag.
Beta (5/17/13) GPS working, stock camera working.
Beta (5/16/13) - 3G/LTE working, display seems better. GPS should also lock but I personally can't.
Beta 1 (5/13/13) - Calls working, GPS tries but no lock so far.
Alpha 3 (5/10/13) - Successful Boot.No phone/data, no GPS.
Source:
PA Official Repositories
CyanogenMod Official Repositories
Device Dependencies:
android_device_samsung_jf-common
android_device_samsung_msm8960-common
android_device_samsung_qcom-common
Sprint GS4 Device Repository
Here is specifically what I did to get it to build.
NOTE: Due to potential copyright issues I do not include a vendor repo.
You can extract the files from the phone or ROM as needed - should you decide to build on your own.
Credits:
Early Bringup Advice: Entropy512, Shabbypenguin, Cordell12
Current Mentor/Collaborator: Noobnl (CM CDMA Maintainer)
If it's working this well, chances are he's had a big hand in it!
Testers: Mohogalore, robbyamor, crawj and others
Steve Kondik (Cyanogen) for CM development and jf common work
The CM maintainters who continue to improve CM along with Mr. Kondik
The crew that is Paranoid Android - Pure Hybrid!
...and of course! You, the community, for your support as well! Thank you!
You are just rockin builds out, nice!
garwynn said:
Credits:
Thanks to those who helped get CM going.
I'm using that as a base.
Here it is - Paranoid Android based on AOSP (current 3.50)
Well, in my sleep deprived state I figured I would at least try getting this to build.
DISCLAIMER:
Your device, your responsibility. I am not liable for anything you flash, including this. You've been warned.
Current Status, Links to Current Builds, Notes, Base, etc are consolidated here:
[ROM][ALPHA][UNOFFICIAL]AOSPA 3.50 for SPH-L720 (SXTP Developers)
Hope this kick starts the dev efforts for the S4!
Click to expand...
Click to collapse
Anyone give this a go yet? I'll be the first if not
Sent from my SPH-L720 using Tapatalk 2
jsmcmahon89 said:
Anyone give this a go yet? I'll be the first if not
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Did, but more input the better. Has the slanted graphics issue that we saw on the first builds of CWM and CM.. Try it, you'll see.. and the phone is actually booting (you'll see it under device from pc when booted) Just can't get adb working yet but I'm sure he'll crack that nut as well.
When I do a . build/envsetup.sh I get 2 git errors.
Don't think that would cause this issue but we only had that with the original jfltespr repo.
So I guess I have some digging to do into this.... when time allows.
going to give this a try right now, will get back to see if the calls work soon.
Update: didn't boot up. I got a black screen and that is it right after the Samsung logo came up
blacknet101 said:
going to give this a try right now, will get back to see if the calls work soon.
Update: didn't boot up. I got a black screen and that is it right after the Samsung logo came up
Click to expand...
Click to collapse
By chance did you catch the flash of slanted graphics right after the logo or connected to PC to see if the device was awake?
Sent from my SPH-L720 using Xparent Skyblue Tapatalk 2
New build, same links. Updated to fix envsetup issue and match current cm trees (minus overlay removals for this only)
Sent from my SPH-L900 using Tapatalk 2
garwynn said:
New build, same links. Updated to fix envsetup issue and match current cm trees (minus overlay removals for this only)
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Will this have halo when it is publicly released?
samdsox said:
Will this have halo when it is publicly released?
Click to expand...
Click to collapse
I'm sure it will.. One thing at a time this dude put out three sick aosp builds in like 2 days!! Thanks for the efforts my man!
Sent from my SPH-L710 using xda premium
Yes. PA 3.50 is the Halo release.
Sent from my SPH-L720 using Tapatalk 2
mjs2011 said:
Yes. PA 3.50 is the Halo release.
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
It is but it's not out in their public repos. Caused a bit of problems because they made some commits publicly and some not.
Anyhow it looks like we have a few issues. PA's ramdisk gets distorted boot animation (like we saw with early CM testing) and then goes to black. Think I can get that one into ADB with same edits. Flash CM kernel and no boot animation but USB init goes through - just as mtp (not mtp,adb like in recovery)
So, making a change to CM the init file to start adbd. That ought to get us far enough to peek in and see what's going on. Obviously something is different between the two kernel ramdisks causing a display change.
so it's normal that it's not booting? or should it be booting by now?
blacknet101 said:
so it's normal that it's not booting? or should it be booting by now?
Click to expand...
Click to collapse
It's normal based on current results for it not to boot. That's why it's at Alpha development.
In all honesty I should downgrade it to Pre-Alpha because Alpha suggests it would boot successfully.
Don't worry, when it boots and we get some functionality I'll promote it to Beta testing.
If this CM kernel + AOSPA ROM gets us ADB I'll post that for people to go in and collect logcats.
That may help us track down the issue to at least get display going.
garwynn said:
It's normal based on current results for it not to boot. That's why it's at Alpha development.
In all honesty I should downgrade it to Pre-Alpha because Alpha suggests it would boot successfully.
Don't worry, when it boots and we get some functionality I'll promote it to Beta testing.
If this CM kernel + AOSPA ROM gets us ADB I'll post that for people to go in and collect logcats.
That may help us track down the issue to at least get display going.
Click to expand...
Click to collapse
Thanks for the clarification! I can't wait to be able to run this ROM. I would wanna help with logcats but I have no idea how to do any of that.
OK, finally took a peek at this. Turns out there's something wrong with the kernel/ramdisk for sure. System is not mounting, shell folders within /data didn't exist.... which means even the init scripts didn't get far. ADBD did start so it's a clue as to how far it got.
Unfortunately since it's not as far as I hoped it is being downgraded to Pre-Alpha status.
will the "Halo" feature be included?
Sent from my SPH-L720 using xda premium
blacknet101 said:
will the "Halo" feature be included?
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
It's not in the public repos... at least not yet.
Sent from my SPH-L900 using Tapatalk 2
Yet another sleep deprived day... yet as I go to work I am happy.
PA back to Alpha status as it successfully boots.
Screenies to come but I can say this - Wi-fi okay, 3G/4G/Calls NG, GPS NG.
I'll start with calls first on this.
Awesome!!!
Sent from my SPH-L720 using Tapatalk 2
DISCLAIMER:
I, NOR ANY MEMBER OF Team Skunk Piss
ARE RESPONSIBLE IF YOU BRICK YOUR DEVICE,
LOSE YOUR JOB,
YOUR WIFE LEAVES YOU
OR YOU GET FINED FOR LOITERING WHILE USING THIS CUSTOM ROM
BlakCM is
Inverted CM10.2 With Cherrypicks
Active Display
HALO
UI:dark toggle 'TRDS'
Settings: PIE Control
Settings:disable fullscreen keyboard
Lockscreen:allow lockscreen rotation
Statusbar:clock color
Statusbar:clock alinment
Statusbar:am/pm style
Statusbar:date
Statusbar:date style
Statusbar:date format
Statusbar:circle battery options
Statusbar:circle color
Statusbar:circle text color
Statusbar:reset circle colors
Display:custom carrier label
Init.d support
For CM updates http://github.com/CyanogenMod
For BlakCM Updates http://github.com/TaoSP
** More to come...
The image below reflects the HTC EVO LTE, but is mostly similar to the Sprint S4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MAKE A BACKUP: ALWAYS
Download the latest build -Oct 17, 2013
Download GApps of your choice [4.3]
Full wipe, and manual format /system RECOMMENDED [please wipe good]
Flash ROM and the GApps
Reboot
http://github.com/TaoSP [4.3]
http://github.com/Blak-CM [4.2.2]
http://github.com/TeamBAKED
http://github.com/Cyanogenmod
http://github.com/TeamSkunkPiss
https://github.com/AOKP/packages_apps_PerformanceControl
BlakCM_4.3_jfltespr
link carries you to my teams forum. no sign-up required, but it is nice there.
SO FAR POSSIBLE ISSUES INCLUDE
***DOCK FAILURE
***A FEW GRAYED OUT OPTIONS IN CONTACTS.
GAPPS PACKAGES
http://goo.im/gapps/gapps-jb-20130813-signed.zip
Get 4.3 packages.
-Noobnl [cm device maintainer]
-AndroidFileHost
-CyanogenMod
-LiquidSmooth
-TeamBAKED
-AOKP Team
-SlimRoms
-MoKee
-lowerymarty
-Sleepycloud
########TEAMSKUNKPISS########
-TroNit
-Soap
-Swiperrat
-RootLinux
-
-All you sexxxy f*cks for flashing and supporting TEAM SKUNK PISS
Kernel Source
https://github.com/CyanogenMod/android_kernel_samsung_jf
Keep in mind, I do not own this device, but my two testers do, and I rely heavily on them.
Either way, if you have any questions, first, read the FAQ below, then ask away, dev thread or not.
(Work In Progress) FAQ
Do I have to wipe before flashing??
Always wipe, no matter what ROM you are on now, even if it's a previous version of BlakCM.
I flashed a different kernel and now I'm having an issue, what should I do?
Boot to recovery, wipe everything and reflash BlakCM. I'll only provide support for the kernel integrated into BlakCM.
I see 'So and so" posted a fix for this issue or that, is it safe to flash that fix on BlakCM?
Please make a backup before making any modifications or flashing any 'fixes' from ANYONE. You also flash said fix or mod at your own risk..
My data [3G/4G/LTE] doesn't work, but everyone else's seems fine, how do I fix it?
Flash a Stock ROM and update your profile then flash back to BlakCM.
This ROM is for the carrier in the section it is placed in, if you have problems with data and are on a different carrier,
then you must search elsewhere for a fix or ask around to see if someone else knows.
I flashed the ROM and now I have an issue, what should I do?
Pull a logcat and post it on to pastebin.com, provide a link in this thread to it.
Be detail specific in your post. I need to know if you have modded or changed anything that may cause the issue.
How do I pull a logcat?
Check out this thread http://forum.xda-developers.com/showthread.php?t=1726238
Will you add 'this' feature?
Not likely. If you want a feature added unofficially, you should add the feature yourself and post your unofficial build.
When will this 'issue' be fixed?
NO ETA's.
thanks!
Sent from my SPH-L720 using Tapatalk 2
Thanks
Sent from my SPH-L720 using Tapatalk 4
Any ideas on how to get status bar to go transparent? I've adjusted it back and forth and no go...BTW the rom is dope. Tks op and all involved!! :thumbup:
Sent from Houston
this rom looks awesome, can anyone tell me if this rom has the Call hang up bug. thanks in advance
flashback7 said:
Any ideas on how to get status bar to go transparent? I've adjusted it back and forth and no go...BTW the rom is dope. Tks op and all involved!! :thumbup:
Sent from Houston
Click to expand...
Click to collapse
Hey Flash, how's data working for you? I'm thinking about giving this a whirl when I get home tonight.
mjs2011 said:
Hey Flash, how's data working for you? I'm thinking about giving this a whirl when I get home tonight.
Click to expand...
Click to collapse
All good all day. :thumbup:
Sent from my SPH-L720 using Tapatalk 2
This is really good. Any chance we could get this updated to a more recent nightly? Unfortunately data is broken for me on the 9/26 build but better on 9/27.
Sent from my SPH-L720 using Tapatalk 4
wambo has went to og to s4 lol good job on rom
Sent from my SPH-L720 using Tapatalk 4
mjs2011 said:
This is really good. Any chance we could get this updated to a more recent nightly? Unfortunately data is broken for me on the 9/26 build but better on 9/27.
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
Nightlies need not apply. Based on the source used for this build, this would be closer to 9/24-25. Anyhow, I'll sync and compile another build tonight if data is a problem across the board, otherwise, it will be later this week.
g2435 said:
wambo has went to og to s4 lol good job on rom
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
Lol, won't ever be as active as the legacy. I wish, but not likely. Good to see ya again sir.
Hi Wambo, is listview included in this rom?
sj
Sent from my Carbonized SPH-L720 on 9/30 Nightly with KT 9/17 using [email protected] Pro
sjsharksfan420 said:
Hi Wambo, is listview included in this rom?
sj
Sent from my Carbonized SPH-L720 on 9/30 Nightly with KT 9/17 using [email protected] Pro
Click to expand...
Click to collapse
Listview Animations? Yes. I have yet to be able to run it myself to tell you with certainty, but I was also told, that listview was updated and I am unaware as to whether or not it has been updated within this source. Either way, there is Listview. Yes.
TEST build uploading now.
I repeat, TEST.
Full wipe.
CHANGELOG CM: covers #next +4
http://changelog.bbqdroid.org/#/jfltespr/next
CHANGELOG BLAKCM:
HALO GPL updated
FRAMEWORKS defaults and color adjusted
follow normal download path, link is up.
Downloading as we speak, while watching Wolf's Rain. Will report back can't wait to try er out
This is my signature
The only issue I ran into were some force closes in settings, and cannot install .apk files from my download folder. It simply would not let me press on install. Other than that, the rom is smooth, and I love the black theme.
gheezydroid said:
The only issue I ran into were some force closes in settings, and cannot install .apk files from my download folder. It simply would not let me press on install. Other than that, the rom is smooth, and I love the black theme.
Click to expand...
Click to collapse
To side load apps, go into wherever the setting is to toggle installing non-market apps. Toggle it on and off a few times, see if that works. As for FC's, what part of settings FCd exactly?
gheezydroid said:
The only issue I ran into were some force closes in settings, and cannot install .apk files from my download folder. It simply would not let me press on install. Other than that, the rom is smooth, and I love the black theme.
Click to expand...
Click to collapse
Does halo still not allow you to install apps when it is on? If so then that is your problem.
Sent from my SPH-L720 using xda app-developers app
KelevrA_8 said:
Does halo still not allow you to install apps when it is on? If so then that is your problem.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I wasn't aware that was an issue, thanks.
KelevrA_8 said:
Does halo still not allow you to install apps when it is on? If so then that is your problem.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I'll check on that and get back to you.
Temasek's UNOFFICIAL CM13.0 BUILDS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will attempt to get builds out as soon as Temasek releases a new version, however due to commitments i may miss a release. I will not upload a ROM until i have flashed it myself. Please report any bugs or issues that you see; when applicable, Thank you.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This thread is currently under maintenance. Should there be any inaccurate information, please PM me. Images and formatting will be handled at a future date.
...not ready yet
A WORKING version TWRP is required i use Official TWRP 2.8.7.2
Clean Install
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Ensure you’re on the latest vendor image from google - https://developers.google.com/android/nexus/images
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM. <<-- You don't have to do this unless you want too
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. Reboot Device.
Dirty Flash
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK. (I find wiping /SYSTEM can stop some issues with play store F/C’s)
3. Install the zip from recovery.
4. Install GApps (ensure that they are from the same build, otherwise you must do a clean installation when using a newer GApps package)
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
5. Reboot Device.
More:
probably something i havn't found as yet
boot animation is not yet full screen. When I created it, I only had my hlte device but it will come in due time.
@temasek @apascual89
CM Team, CyanogenMod
@arter_dev
Source
CyanogenMod
Kernel Source
Joshndroid
Device Tree
Temasek
Rom Source
Changelogs
https://github.com/temasek/Changelogs/blob/cm-13.0/cm_hlte-Changelog.txt
Shared Google Drive Device Folder (have Rom shared directly to your Google Drive Folder)
see here for further - http://forum.xda-developers.com/showpost.php?p=66024317&postcount=827
Basketbuild Downloads - Backup Download Location (OR for those not in Google Shares)
https://basketbuild.com/devs/Joshndroid/Temasek Roms/mako
GApps - Lollipop GApps Package
http://opengapps.org/
I have be extremely pleased with Open Gapps and you can even download daily packages, I have tried the micro, mini and nano packages with good success so far - All credit to their team and original thread source can be found here for important information and updates - http://forum.xda-developers.com/android/software/pa-gapps-continuation-t3098071
SuperSU for flashing via recovery - Credit to Chainfire
http://download.chainfire.eu/supersu
and probably this
Thanks for putting this together, really looking forward to giving it a go when I get home.
Does this include support for f2fs, have you tried it and if so do you think it is worth it?
Thanks
Can i test this rom in multirom??
If it's a test then why not.... If it doesn't work then your original rom isn't affected... I flash with multirom recovery
build v4.3 is up and ready on basketbuild, will update thread later
Sent from my Nexus 9 using Tapatalk
cat wait to try!
On the newest build from 1/5ver 4.3 -I have no boot screen after google display image but rom still works .
^^^^ relax dude, just the boot animation not playing.
Wanted to have the same temasek boot animation, we made one just like for lt03wifi but it broke lol will endeavour to fix it
Sent from my Nexus 9 using Tapatalk
joshndroid said:
^^^^ relax dude, just the boot animation not playing.
Wanted to have the same temasek boot animation, we made one just like for lt03wifi but it broke lol will endeavour to fix it
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
no problem wasnt sure if you knew about it! thats all! didnt mean to sound pushy!!
jgcmurray said:
no problem wasnt sure if you knew about it! thats all!
Click to expand...
Click to collapse
Your exclamation marks throw me off. You must just like them lol
Sent from my Nexus 9 using Tapatalk
joshndroid said:
Your exclamation marks throw me off. You must just like them lol
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
yep it is a bad habit.
Thanks to @SkyThes
Go here for FLASHABLE zip containing the boot animation fix. Proper Fix will be in next release probably later today sometime anyway https://s.basketbuild.com/devs/Joshndroid/Android Mods/Rom Fixes
Sent from my SM-N9005 using Tapatalk
I've heard rumors of a theme.zip for this too.
aaronrw said:
I've heard rumors of a theme.zip for this too.
Click to expand...
Click to collapse
Already? Do tell lol
Sent from my SM-N9005 using Tapatalk
joshndroid said:
Already? Do tell lol
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
That's all I know....for now.
aaronrw said:
I've heard rumors of a theme.zip for this too.
Click to expand...
Click to collapse
joshndroid said:
Already? Do tell lol
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I think you might be refering to this. Material Dark for Temasek
I also have a L5-AOSP Bootanimation zipped up for flashing if needed..
Nevermind I just noticed there is one posted above #13
was hoping to release 4.5 tonight, it was syncing while i was testing.. feels a bit derpy, not like previous releases. Going to hold off until tomorrows offering
joshndroid said:
was hoping to release 4.5 tonight, it was syncing while i was testing.. feels a bit derpy, not like previous releases. Going to hold off until tomorrows offering
Click to expand...
Click to collapse
I've reverted the use of linaro 4.9. Back to stock toolchain for now. So now u can rebuild.
temasek said:
I've reverted the use of linaro 4.9. Back to stock toolchain for now. So now u can rebuild.
Click to expand...
Click to collapse
Hey a buddy recommended this to me he's using opo. Thanks for the builds and I need that theme!!!! Lmao