hey guys my ace touchscreen is not working....i was playing music on my phone and all of sudden touch stopped working....i tried restoring nandroid backup,rebooting,removing battery,sim,memory card....still touch not responding at all.
rest all buttons like power off,home buttin and capacitive buttons are working...
crueldevil19 said:
hey guys my ace touchscreen is not working....i was playing music on my phone and all of sudden touch stopped working....i tried restoring nandroid backup,rebooting,removing battery,sim,memory card....still touch not responding at all.
rest all buttons like power off,home buttin and capacitive buttons are working...
Click to expand...
Click to collapse
Did u try installing the ROM again?? Bcoz some times the touch screen drivers might get corrupted.. if its a Hardware fault u need to get it to the service center ASAP!!
Reflash buddy
------------
May The Force Be With You
Related
hi guyz
ive a AT&T Tilt (Kaiser 100). so ive flashed my kaiser loads of times no problem was running great until now when i unlocked it the PPT button and call program open up themselves and some ramdon keys such as E,D,C,etc are pressed!!
also the slide keypad stops responding but the lights are still on for it. the navigational buttons on screen side stop working and the start menu opens up by pressing the button in the middle of navigational buttons!! rest of the keys dont work. power and camera keys still work!
i gave my phone a rest for 4 hours and when i turned it on it started working fine and then again after 5 minutes of use same problem. sometimes in the middle of use it automatically starts working again fine and then same problem comes and this keeps going on!!!
one of my workers at the office mishandled my phone (i think) he couldn't figure out how to slide open the phone and tried everything
so i cant rule out if its hardware or software problem???
please help!!
Hard reset your device and see if that solves the problem.
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
jsngrimm said:
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
Click to expand...
Click to collapse
Because sometimes...well most of the times, with a help thread request like yours are solved with a hard reset . Going by the book...(oohh and it was late last night by the way )
On another note, seems like your friend did mess some of your keys and probably hardware issue. Try and mess with some keys and see if they are not stuck.
In most situations it quicker and easier to reset the phone. Just thnk about it, you don't have the original OS to repair with and you don't really have a method of sending commands to the phone.
Hi my hd7 touch screen stopped responding. I tried soft reset and battery pull and nothing. The phone still loads up normally, also volume and camera buttons work fine. is there anything else I can try before doing a hard reset?
doesn't seem like it...
Had the same symptoms after flashing a ROM... Touchscreen was not responding and the hardware keys only worked until some point...
only thing that helped was a hard reset...
Have you tried connecting it to your Computer? Maybe possible to backup some data at least?
Good morning!
I have xperia x8 and lately I can't slide down the status bar . I installed ADW launcer and I'm able to slide the bar down . The bad news is that after a few minutes it gets stuck and I can't press anything on the screen, it won't even unlock. The physical buttons work normally. If I reboot 2-3 times by removing the battery, the touch screen works normally but again just for a few minutes and then it won't work any further. What should I do???
I have nAa 2.6.29.6-14 and Prime HD 10.0 (I've tried and cm10) with Android 2.3.7
Thank you in advance.
R: [Q] Touchscreen won't work..
TecmanGR said:
Good morning!
I have xperia x8 and lately I can't slide down the status bar . I installed ADW launcer and I'm able to slide the bar down . The bad news is that after a few minutes it gets stuck and I can't press anything on the screen, it won't even unlock. The physical buttons work normally. If I reboot 2-3 times by removing the battery, the touch screen works normally but again just for a few minutes and then it won't work any further. What should I do???
I have nAa 2.6.29.6-14 and Prime HD 10.0 (I've tried and cm10) with Android 2.3.7
Thank you in advance.
Click to expand...
Click to collapse
Wow..i got your problem too..bit judt after reboot..
Sent from my E15i using xda app-developers app
I recently switched my digitizer to synaptics (my cypress one stopped working) and had problems ever since,
it works right when the phone boots but after a while touchscreen just doesn't responds at all.
im also using nAa-14 kernel and tried with alfs but issue persists, can anybody confirm this?
I have come across this problem and I think its with the digitizer as told by rxpassenger.It can be because of a hardware failure or because of a corrupted internal ROM not allowing the digitizer to function properly.
If its a hardware problem then I cannot help you but I have found that this problem is mostly caused because of corrupted ROM.So I know of some fixes that may help.
So follow these steps.It may work:
Power Off the phone.
Take out the Battery.
Wait for 10-15 seconds so that all the capacitors and resistors are fully discharged of electricity.
Put back the battery and go into recovery mode.(Press back button repeatedly when the nAa logo starts coming up.)
Have a full wipe.And Reboot.
If the above method didnt work then try this:
Download a new copy of the ROM you are using.
Go into Recovery and Full Wipe,Wipe Cache,Wipe Dalvik-Cache etc.
Install the new Copy of the ROM.
Reboot and try if it works.
There is also one more method but I dont know whether it will work.I havent used this method and have only heard people saying about it.The digitizer is in the left corner of the screen and if we press and hold that corner for some time the digitizer may start working.But I dont know to how far this is correct.
Cheers,
Leon
Hi all Members
I need a little help. I've replaced touch screen on my xperia SP. Everything seems to be ok, until I lock the screen. Then when I want to unlock the phone by press side power button, sometimes is touch screen not responding and looking dead, but sometimes not a everything working. During freeze is impossible to unlock phone using touch streen, it is not responding to any fingertip. Side buttons like volume up and down, power and camera button working normal.
Then I must to remove back cover a manually touch off button by pen. After power on phone everything work for few minutes, hours ...
The touch touch screen ''freeze'' after power button press repeat daily about 5-10 times.
The freeze is ONLY when unlocking phone.
May it be by use touch screen from ebay? (maybe not original, I donť know) ... this model http://www.ebay.com/itm/291440460418?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I'm using Panadroid 4.4.4 ROM and before touch screen replace I have not any problems.
Please, help me :crying:
nobody to help me ?
Are you trying to reinstall a rom?
Because this touch screen is remanufactured and have chance the hardware is not same. And your rom is configured for previous touch screen. Take a chance
Sometimes the touchscreen stops working, it randomly happen when i unlock the screen.. the music still play, i can see notification, the time and everything in the screen (even use the fingerprint) ,but the phone is unusable , it doesnt respond to touch.
the only way that i find to fix the problem is forcing a reebot (hold the power buton for ~7s)
i just tried changing the rom, but it keeps happening
is very annoying.. someone know a fix?
thanks in advance and sorry for my english