Database Develop

[PRJ] Vibrant Voodo Lag-fix w/OC-Optimized 2.6.29 Kernel - Beta4 9/19/2010

This is Voodoo LagFix beta4 for the Vibrant. It does not include color adjustment just the /data as ext4. This has been tested by many users and is confirmed working, including GPS WiFi BT etc. There is also the performance increase of course as well due to the Voodoo lagfix and the optimized Kernel with OC option.
WARNING BEFORE FLASHING:DISBALE ANY LAGFIX'S YOU MAY ALREADY BE USING BEFORE APPLYING THIS FIX - IS NOT COMPATIBLE WITH THE LATEST LEAK JI2
Samsung has not provided us with the kernel sources that were used in the latest leak (which are different) so until they do we cannot support it.
To enable simply flash the kernel. It will automatically backup your existing /Data partition and create the /data as ext4 and restore so you dont lose your data of course.
To disable simply place a file/folder in the "Voodoo" folder on your SDcard (the internal one) called "disable lagfix" (e.g /sdcard/Voodoo/disable lagfix") no extention just that exact name and reboot. After your phone boots and you check that your /data partition is again RFS you can re-apply any other kernel you were using.
Upon enabling or disabling your phone will sit on the Vibrant screen. This can take 5-10 minutes depending on how much data you have (don't panic). "Linda" the robotic voice should let you know where in the process you are. After its done and your phone boots you should be able to run "mount" in terminal or adb shell and see your data is now EXT4 at
Code:
/dev/block/mmcblk0p4
Disabling by placing the "disable-lagfix" file in the "Voodoo" folder in your sdcard and that simply undoes what the enable did and returns your /data to the RFS setup at its original location.
PLEASE READ
The kernel boots to stock clocks but CAN be OC'd to 1.2Ghz via setupCPU or a user script. If you want to keep the phone OC'd just use setCPU and check apply on boot or use a user script that launches from /system/etc/init.d. If you want to run stock clocks just boot and don't do anything
NOTE This kernel does not need the init.d folder to be present to flash but will parse it if it is there. Also this kernel includes almost all the optimizations my OCv4 kernel so you get the best of both worlds if you want. Voodoo plus OC!
So a simple install routine through recovery would go like this
1.Flash a ROM and root it or flash one that is already ROOTED
2.Download beta4 Voodoo .zip file
3.Reboot into Stock recovery and flash the update.zip made for STOCK recovery.
4.Listen to "Linda" the robot tell you the progress as Voodoo does its thing.
RECOVERY UPDATE
Voodoo Beta4 UPDATE.ZIP
EDIT:Voodoo Beta4 Update zip you can install through STOCK recovery
http://project-voodoo.org/downloads/Voodoo-lagfix-3.0-SGH-T959-update.zip
Clockwork Version by request
www.justanotherdev.slackdev.com/Vibrant-Voodoo_beta4.zip
ODIN UPDATE
Vibrant Voodoo Lag-Fix Beta4
http://project-voodoo.org/downloads/Voodoo-lagfix-3.0-SGH-T959-odin-pda.tar
KNOWN ISSUE:To perform NANDroid backups or restores through clockworkmod recovery please disable the lagfix before either operation otherwise it will not work.
Big Thanks to supercurio for the Voodoo project and for letting me share it with all the Vibrant users out there.

reserved for future use...

I love you.
Going to test in a few. Do you know where we can get the disable-lagfix file? Your OP doesn't include it. =)
EDIT: Nevermind. I should have read more carefully. THANKS AGAIN JAC!

I just flashed the Leaked TMO Kernel with the GPS Fix... can I flash this Lag FIx?

Thanks a lot man! Really appreciate you giving us something to tinker with, been dying to try this out

Will users who already are using 1-click lagfix need to do anything differently in order to use this?

Goog1e Phone said:
I love you.
Going to test in a few. Do you know where we can get the disable-lagfix file? Your OP doesn't include it. =)
Click to expand...
Click to collapse
You just have to name a file "disable-lagfix" and throw it on you sd card. It shouldn't actually have any data in it.

acis said:
Will users who already are using 1-click lagfix need to do anything differently in order to use this?
Click to expand...
Click to collapse
Ya, restoring back to stock or removing the lagfix if its possible. You cannot apply this if you already have a lagfix. Remove it or restore to a previous backup before you were using the lagfix (you made one, right )

just installed on Eugene's r3 rom, and it feels very snappy, can't wait for beta 3, thanks!
Edit: just did a second reboot, and I'm getting an error about a blank internal SD card, and all my data is missing. Any ideas on what I did wrong? I had a lagfix previously installed but had reflashed r3 and didn't redo the fix(not a nandroid just a new flash)
Sent from my SGH-T959 using XDA App

zimphishmonger said:
Ya, restoring back to stock or removing the lagfix if its possible. You cannot apply this if you already have a lagfix. Remove it or restore to a previous backup before you were using the lagfix (you made one, right )
Click to expand...
Click to collapse
Yes. I didn't want to go that far back but meh. 1 click doesn't seem to be working very well tbh.
Appreciate all the hard work that goes in to making the phone actually operate as it should have on day 1. This community is amazing.

It does NOT work on the new leaked rom, fyi :O)
If you are using the leaked rom and you flash this you will need to flash the original rom and check repartition to restore your phone.

Do you need to flash the init.d update before flashing this kernel as with your previous kernels?

Dude this is fast... thank you def. worth the wait so far. the lag is gone! i cant wait to see what you guys come up with next.. its like christmas every few weeks
Eugenes Hybrid r2

Babyface1249 said:
Do you need to flash the init.d update before flashing this kernel as with your previous kernels?
Click to expand...
Click to collapse
No. Just flash the kernal through clockwork. No other steps are needed, unless you already had a lagfix prior.

Goog1e Phone said:
No. Just flash the kernal through clockwork. No other steps are needed, unless you already had a lagfix prior.
Click to expand...
Click to collapse
Giddy up. Flashing now before I get my second replacement vibrant tomorrow lol

HELP!!
i just flashed this through recovery and now my phone wont boot up... just stays at vibrant screen.
when i try to get back to go through "reinstall packages" to get back to nandroid i get stopped. it says...
--install from sdcard...
finding update package...
E:cant mount /dev/block/mmcblk0p1 (or /dev/bloc/mmcblk0)
(device or resouce busy)
E: cant mount SDCARD :update.zip
Installation aborted.
AHHH! what do i do?

Man this thing is FAST! I say we start calling this fix the doodoo lag fix instead because this thing is the SH*T!

itsjusttim said:
HELP!!
i just flashed this through recovery and now my phone wont boot up... just stays at vibrant screen.
when i try to get back to go through "reinstall packages" to get back to nandroid i get stopped. it says...
--install from sdcard...
finding update package...
E:cant mount /dev/block/mmcblk0p1 (or /dev/bloc/mmcblk0)
(device or resouce busy)
E: cant mount SDCARD :update.zip
Installation aborted.
AHHH! what do i do?
Click to expand...
Click to collapse
How long did you wait when it was on the Vibrant screen? The OP says it will usually stay on the VIBRANT screen for 5-10 min before it boots up depending on how data you have.

Goog1e Phone said:
How long did you wait when it was on the Vibrant screen? The OP says it will usually take 5-10 min on the Vibrant screen before it boots up depending on how data you have.
Click to expand...
Click to collapse
waited 20+.. nothing!
is there anything i can do? SH*T, i need this phone for work...

itsjusttim said:
HELP!!
i just flashed this through recovery and now my phone wont boot up... just stays at vibrant screen.
when i try to get back to go through "reinstall packages" to get back to nandroid i get stopped. it says...
--install from sdcard...
finding update package...
E:cant mount /dev/block/mmcblk0p1 (or /dev/bloc/mmcblk0)
(device or resouce busy)
E: cant mount SDCARD :update.zip
Installation aborted.
AHHH! what do i do?
Click to expand...
Click to collapse
Did you install the leaked rom? You will need to go back to the stock rom in ODIN and check the repartition box. Follow my instructions here: http://forum.xda-developers.com/showthread.php?t=780935 but use the original rom

[RECOVERY]Unofficial ClockworkMod Recovery v4.0.0.2(WIP)

Hi
Clockwork Recovery v 4.0.0.2 for Galaxy Ace
v2:
- working nandroid backup/restore!
For now i've disabled backup/restore of boot and recovery partitions. Restore of DATA, CACHE and SYSTEM is working fine.
If you have JTAG and want to test restore of boot/recovery please PM me!.
- it's based on KPH firmware + root in adb (both in normal and recovery mode)
v1:
Tested:
- wipe Data/Factory reset
- wipe cache partition
- some options under advanced menu (to wipe)
- install zip from SDCard (tested on some file from UOT kitchen)
- reboot recovery
- mount USB storage (and other mount options) Better not try to format partitions from recovery yet - it could format them to ext4 for which we probably not have yet support in kernel.
Know bugs:
- poweroff sems to reboot phone
- problem with graphics (probably framebuffer is set to 24 or 32 bpp mode. There is also missing double buffer support in framebuffer - thats why we have 2 recovery screens). It'll be fixed - thanks to tj_style!!
Remember, I am not reponsible if you brick your phone. You're flashing this on your own risk.Not all options are tested!!!.
How to flash (v2):
1. Download file from here .
2. flash it as PDA with odin
Mirrors:
Multiupload (thanks to peeter123)
I've removed recovery.zip - it was recovery.img packed with zip, not update for apply using stock recovery.
To move in recovery:
- Volume up/down to move.
- Home (center key) to select item.
- Back to move back.

Where did you get this?

Lovetz said:
Where did you get this?
Click to expand...
Click to collapse
I've build it from source using this tutorial Porting clockwork recovery to new device, with some changes. Then i've mixed recovery.img with those from samsung firmware.

PabloPL said:
I've build it from source using this tutorial Porting clockwork recovery to new device, with some changes. Then i've mixed recovery.img with those from samsung firmware.
Click to expand...
Click to collapse
You are elite, dude!;-) (Hackers)

This opens so many oppertunites to our Ace CyanogenMod being one of them. Have you got any further with these bugs? This is great. Thank you
Sent from my GT-S5830 using XDA App

awesome work!!!....it would be legendary if NANDROID backup works!!!!NO more bricking worries!!!

I've successfully to porting the Clockworkmod Recovery too for Galaxy mini.
The problem with framebuffer it's been fixed too.
I just have the problem with backup & restore, also with flashing full rom from zip.
Are you get success with backup and restore?
since galaxy ace / mini is using different tool for read / write the bml partition. not like SGS that can using redbend_ua

PabloPL said:
Hi
Today i managed to run the newest Clockwork Recovery on my Galaxy Ace. It has some problem with graphics (as you can see on screenshots).
I've tested following options (and for me they are working):
- wipe Data/Factory reset
- wipe cache partition
- some options under advanced menu (to wipe)
- install zip from SDCard (tested on some file from UOT kitchen)
- reboot recovery
- mount USB storage (and other mount options) Better not try to format partitions from recovery yet - it could format them to ext4 for which we probably not have yet support in kernel.
Know bugs:
- poweroff sems to reboot phone
- problem with graphics (probably framebuffer is set to 24 or 32 bpp mode. There is also missing double buffer support in framebuffer - thats why we have 2 recovery screens)
I've also managed to create nandroid backup of all partitions (boot,recovery,data and system) but not tried yet to restore them.
Phone info
In recovery mode (sorry for terrible image quality)
I've attached packed recovery.img. it's based on KPH firmware + root in adb (in both boot and recovery mode) + su binary.
Remember, I am not reponsible if you brick your phone. You're flashing this on your own risk.Not all options are tested.
How to flash:
1. take KPH firmware
2. extract CODE_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
- tar xvf CODE_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
3. replace recovery.img with attached file
4. pack it back
- tar -H ustar -c boot.img recovery.img data.rfs system.rfs >ODIN_FILE.tar
- md5sum -t ODIN_FILE.tar >>ODIN_FILE.tar
- mv ODIN_FILE.tar ODIN_FILE.tar.md5
5. flash it with odin
To move in recovery:
- Volume up/down to move.
- Home (center key) to select item.
- Back to move back.
Click to expand...
Click to collapse
GREAT JOB MAN!
Go ahead, you are on it!!!
CHEERS!

The main thing is to get the install update zip feature as that really is the reason we use ClockworkMod and what we wanted it for.
Sent from my GT-S5830 using XDA App

kills999 said:
awesome work!!!....it would be legendary if NANDROID backup works!!!!NO more bricking worries!!!
Click to expand...
Click to collapse
For now i've tested it only with creating backup of boot/recovery/data/system partitions and it generated without errors.
Jekle_Ace said:
The main thing is to get the install update zip feature as that really is the reason we use ClockworkMod and what we wanted it for.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I've tested installing update from zip on some theme from OUT Kitchen and it worked fine

PabloPL said:
I've tested installing update from zip on some theme from OUT Kitchen and it worked fine
Click to expand...
Click to collapse
Can you upload ready-to-flash KPH file with CWM integrated?

Wiping partitions /system /data etc is very important without wiping it can cause many problems as I've done that many times with my ZTE Blade. But still I appriciate this greatly
Sent from my GT-S5830 using XDA App

tj_style said:
I've successfully to porting the Clockworkmod Recovery too for Galaxy mini.
The problem with framebuffer it's been fixed too.
View attachment 623281
I just have the problem with backup & restore, also with flashing full rom from zip.
Are you get success with backup and restore?
since galaxy ace / mini is using different tool for read / write the bml partition. not like SGS that can using redbend_ua
Click to expand...
Click to collapse
Could You share what changed did you made to fix framebuffer problems ?? For now i've made some change found here to get 2 screens in recovery (was getting 4 before).
About backup, like i wrote, tested only creating. I have to set up correct size of all partitions in BoardConfig etc, Ace is my primary phone, so i don't want to brick it.
I've made some changes to recovery source (look into bmlutils/bmlutils.c - there are hardcoded paths to boot and recovery partitions, which on Ace are differend than those in code).
I've also used custom recovery_ui.c with custom key mapping.

Lovetz said:
Can you upload ready-to-flash KPH file with CWM integrated?
Click to expand...
Click to collapse
I have PDA file for odin with it, but i've messed something with Superuser.apk and you must install it by hand (only Superuser.apk, su binnaries are fine). Maybe when i'll have some free time - i'm working and studying (now have exams) - i'll upload it, if someone won't do this before .
Jekle_Ace said:
Wiping partitions /system /data etc is very important without wiping it can cause many problems as I've done that many times with my ZTE Blade. But still I appriciate this greatly
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
For now i've tested wipe only on following options (and it worked fine):
- battery stats
- cache
- data (factory reset)
Sorry for double-postings

PabloPL said:
Could You share what changed did you made to fix framebuffer problems ?? For now i've made some change found here to get 2 screens in recovery (was getting 4 before).
About backup, like i wrote, tested only creating. I have to set up correct size of all partitions in BoardConfig etc, Ace is my primary phone, so i don't want to brick it.
I've made some changes to recovery source (look into bmlutils/bmlutils.c - there are hardcoded paths to boot and recovery partitions, which on Ace are differend than those in code).
I've also used custom recovery_ui.c with custom key mapping.
Click to expand...
Click to collapse
Sure, You can see on my github soon. I'm not yet pushing to my github now.
because the project of Cyanogenmod port and Clockworkmod port for Galaxy Mini is pending now until i have the Galaxy mini back, you can see the progress in this thread.
I've add the double buffering to clockworkmod source, since Galaxy mini kernel doesn't suppot that.
I hope we can colaborate to make clockworkmod is fully working, because the Galaxy Mini, Ace, Gio and Fit is using similiar environtment.

thx dude, i really need this.

tj_style said:
I hope we can colaborate to make clockworkmod is fully working, because the Galaxy Mini, Ace, Gio and Fit is using similiar environtment.
Click to expand...
Click to collapse
It would be nice. As i see You have far more progress.
In my opinion it would be better to make it with only minimal changes (or even without) to android source (recovery etc), to keep it in synch with "mainline". Closer we keep(and less changes), longer we could have support.
Also getting rid of BML and use MTD (when we have sources for 2.3.4) would be great.

PabloPL said:
It would be nice. As i see You have far more progress.
In my opinion it would be better to make it with only minimal changes (or even without) to android source (recovery etc), to keep it in synch with "mainline". Closer we keep(and less changes), longer we could have support.
Also getting rid of BML and use MTD (when we have sources for 2.3.4) would be great.
Click to expand...
Click to collapse
Yup, i'm waiting to someone borrowing the galaxy mini to me and also waiting samsung to get released the 2.6.35.7 kernel source.

The source will come after 2.3 is offically released but we may be waiting a few weeks for it
Sent from my GT-S5830 using XDA App

Great work mate. Maybe you can work together with nprussel who is also trying to run cwm on g ace
@formatting partitions, there is indeed no support for ext4 in kernel
Sent from my GT-S5830 using XDA App

Can`t install any ICS ROM

I tried to install several ICS ROMs on my Galaxy s, but none of them worked. I did all wipes like 3 times before any rom install... I only managed to boot up SGS2 ICS rom, wich was extremely laggy and etc:L Any advices of what i can do?

Flash back to gb with this kit (unzip, read .txt first)
http://db.tt/MOGZx01S
Then go to slim website and read the installation instructions(use a nightly, not a kernel where you see the choice)
Re read, make sure you are clear what to do, make sure you have all that you need on your internal sd (nightly/i9000 file/ common file/ modem from here http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Proceed, take your time, be near a computer, breath deeply, don't panic of things go wrong, post on thread of they do.

Try this.
Download the latest CM9 nightly (you will find it if you Google it)
Go to recovery
Wipe
Format system (mount and storage)
Flash in this order
CM9
Reboot recovery
Modelxxx.xxx
Slim common
Reboot.
Then enjoy
Sent from my GT-I9000 using Tapatalk 2

trying to install AOKP, it gives me error:
assert failed: run_program("/tmp/updater.sh") == 0
Click to expand...
Click to collapse
let me try install other ICS rom.... all life of my galaxy s it was on stock roms.now i decided to update to ICS. first time trying to upgrade to ICS (only used to flash GB roms before)

What exactly is your process in flashing ics, (from gb)
Sent from my GT-I9000 running remICS-UX using XDA premium

calum96 said:
What exactly is your process in flashing ics, (from gb)
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Here is it:
1) get into recovery
2)Data / cache / dalvik-cache wipe
3) format /system
4)again wipes
5)mount everything i can
6) go and install file
it opens aroma installer...
pick needed items and press "install" after that it gives me error

foggydisaster said:
Here is it:
1) get into recovery
2)Data / cache / dalvik-cache wipe
3) format /system
4)again wipes
5)mount everything i can
6) go and install file
it opens aroma installer...
pick needed items and press "install" after that it gives me error
Click to expand...
Click to collapse
Unless the ROM you are installing is specifically telling you to "mount everything", do not do it. Try it again, but this time do not mount anything manually, installing from Zip should do it automatically. If it still doesn't work, make sure the ROM you are trying to install is supposed to be installed from Recovery, some do also provide files for flashing through Odin/Heimdall
EDIT: I do recommend flashing CM9 first, get the newest nightly from here: http://get.cm/?device=galaxysmtd and google apps (if you want them) from here: http://goo.im/gapps/gapps-ics-20120429-signed.zip which is the recommended one for usage with CM9 ICS.

[Q] Slim Bean 2.8 Install Troubles...

I've got an i9000, and I've followed the instructions on the site..
Enter CWN
Wipe data
Format /system
Then mounted /system.
Then install the zip and get this error:
"E:Error in /sdcard/Slim-I9000-2.8.0-OFFICIAL.zip"
"(Status 7)"
"Installation aborted."
"Can't mount /emmc/"
I took out my removable sdcard before doing the install so that accounts for the last message.
I had this problem with 2.7 as well.
I'm not sure what I'm doing wrong. Someone wrote something about installing 2.6 first after doing the data wipe and system format since it reconfigures the directory structure. Not sure if this is true. Any help?

i've got the same problem. i mounted system,SD data but i received the error status 7 and an error on file install.sh. now i search possibile solutions

ulisse83 said:
i've got the sale problemi. i mounted system,SD band data bit i received the error status 7 and an error on file install.sh. now i search possibile solutions
Click to expand...
Click to collapse
I did have luck installing the SlimBean 2.6.0 zip file first, then the gapps.zip. Then upgraded to 2.7.0 doing a cache and dalvik cache wipe. No problems... but still can't seem to get 2.8.0 to work. Though 2.7.0 works quite nicely it seems.
I think there's an update app that is supposed to let you do it from the phone itself, but I'm not sure if that's working properly yet.

yes, i have no problems on old version. Now i'm writing through my galaxy s with cyanogenmod 10 and i want to try again slim ROM.

Had the same problem, it was working with 2.7 just fine, tried to update to 2.8 and it didn't work, read there that updating semaphore kernel would work.
Installed semaphore kernel 2.4.4s (via heimdall) and got bootloop.
Tried to flash stock (xxjvu) via heimdall; everything went smoot but
100%
PARAM upload successful
Ending session...
Rebooting device...
Re-attaching kernel driver...
phone never booted, now I can't get to download or recovery mode, phone just stays off, no lights, nothing, I think is bricked.
Just ordered a usb jig via amazon LOL

If you came from another rom then slim 2.6 or 2.7 you have to flash 3 times
Sent from my GT-I9000 using Tapatalk 2

i flashed again the slim bean 2.8.0 for my i9000. I come back from cm10 thus i did wipe data/factory and format system. I mounted the system partition but i have got the same story. Error status 7......problem with install.sh and all aborted.
Is this a problem with the partition layout of cm10 after the cm nightly available from 26 september?
How can i install the slim bean 2.8.0 on my galaxy s?
edit: i can't install slim 2.8.0
Installing update...
assert failed: run_program("/tmp/updater.sh") == 0
Error in /emmc/SlimBean2.7.0/Slim-i9000-2.7.0-OFFICIAL.zip
(Status 7)
Installation aborted

How to install Slim 2.8
Yes! that error is a normal step of the installation!
When you install the zip of 2.8, you get the error. Then install it again and you will reboot. Power off your phone and restart CWM, then install again the zip! after this, you can install the extras!

If you are coming from any rom apart from slim bean 2.6 and 2.7 you will need to flash it 3 times although I think the advice is to flash 2.6 and then flash 2.8 rather than flashing 2.8 directly. I am currently on 2.5 and I'll updated to 2.8 on saturday but will do it step by step 2.6 > 2.8.

dotanby said:
If you came from another rom then slim 2.6 or 2.7 you have to flash 3 times
Click to expand...
Click to collapse
What's not clear to me is when they say flash 3 times, do they mean just try installing the 2.8.0 zip 3 times? Or do a wipe cache/dalvik cache between each try? Or reboot between tries?
I've got 2.7.0 running fine but it gives me an error on the 2.8.0 flash even if I try 5 times, and that's trying both with and without cache wipes between attempts.

I went from CM10 to slim bean 2.8. All I did was factory reset, wipe + cache and dalvik cache (I didn't mount system or anything like that).
ROM installed normally, no errors and no reboots. Been using it fine for the last few hours now.
Sent from my GT-I9000 using xda premium

I solved the issue in this way. we assume that it is correct to try mountind the system partition but if the error continues then it isn't the solution!
The slim bean team, cunningly, modified the file "Slim-I9000-2.8.0-OFFICIAL.zip"! they changed at 2012-10-25 00:07:28 thus, all those who download the file yesterday, they have the error status 7 etc...
You redownload the slim rom and then to follow the standard procedure:
- enter in recovery
- wipe data/factory
- format system (in mount and storage menu)
- install zip from sd (or external) card
- install slim gapps
- install optional gapps
- enjoy

ulisse83 said:
I solved the issue in this way. we assume that it is correct to try mountind the system partition but if the error continues then it isn't the solution!
The slim bean team, cunningly, ha modificato il file "Slim-I9000-2.8.0-OFFICIAL.zip"! they changed at 2012-10-25 00:07:28 thus, all those who download the file yesterday, they have the error status 7 etc...
You redownload the slim rom and then to follow the standard procedure:
Click to expand...
Click to collapse
You are correct. Just re-downloaded the 2.8.0 zip, SREC update and Gapps update files and everything installed nicely over 2.7.0 with just a cache/dalvik cache wipe.
Nice!

very good. i like very much this ROM. fast and with many RAM.392 mb ! it already includes the semaphore kernel 2.4.4s.excellent.

Back to stokc > Cm10 > Slimbean 2.7 > Slimbean 2.8

HEEEEELP.

I download this roms
-Resurrection Remix V.5.4.4
And also download this.
V.5.7 Remix -Resurrection
Download the gapps and did the normal procedure for installation.
what happens is that after attempting to install the ROM. I get this error.
(Enclose all text that I no longer like spending a capture)
Installing: Storage - sd card1-Resurrecction Remix_Lp_v.5.4.4
finding update package
opening update
installing Update
Detected Fylesystem ext4 for /Dev/block/plataform/msm_sdcc.l/by-name/system
mount: Failed to mount /dev/block/plataform/msm_sdcc.l/by-name/system at / system: Invalid argument
unmouunt of / system failed: no such volume
patching system unconditionally
E: error in /storage/sdcard1/REsurrectionRemix_Lp_v5.4.4-20150511
(Status 0)
instalation aborted
This is me 2 rom mentioned.
after that the micro sd is disabled and must be reintroduced to recognize it the team
Try installing the ROM CM By beto, and is not installed not simply do nothing and pass the phone around two hours in the instalalcion and never proceeded
Now my phone does not pass the logo of motorola
help-'

Did you perform a „factory reset” wipe? Changing ROMs kind of requires you to - a factory reset wipes the old sd-ext, and you still have it.
And are you sure you downloaded the right ROM? I can't access the RR site now, but they don't have ROMs for Thea.
What phone do you have, actually?

FCorvin said:
Did you perform a „factory reset” wipe? Changing ROMs kind of requires you to - a factory reset wipes the old sd-ext, and you still have it.
And are you sure you downloaded the right ROM? I can't access the RR site now, but they don't have ROMs for Thea.
What phone do you have, actually?
Click to expand...
Click to collapse
I have xt1045 4g
I've done all the procedures to install the rom .
but gave those mistakes.
try putting on a rom 5.1 stock xt1045 according to what I found here on xda but I do not install it .
the phone did not stay at the logo and not as most do.

Then you need to flash this ROM: CM Peregrine
Or this one: RR Peregrine
See the ROM's discussion thread here.
You are also on the wrong part of this forum - you'll get better advice here: Moto G