Database Develop

2.2 dxkm3 to 2.3.3 dxjpc

I,m from malaysia.I would like to know is this dxjpc 2.3.3 support for upgrading from dxkm3.I found this at samfirmware,but a bit worried to upgrade.
Now I can't wait....please help.I need someone who can give me advise....
Sent from my GT-P1000 using XDA Premium App

now saw it ... and yeah its support malaysia ...but i didn't try it yet ...
go this page and copy this P1000DXJPC in here http://www.samfirmware.com/samfit.htm
it will show u its for malaysia and indo etc .. after u flash it ,, if you wanna change your CSC to MALAYSIA to support 3g ... u must write this in dialer *#272*IMEI* then you choose malaysia from inside XME ... and press install

I will try it tonight.
Thanks you very much.
Sent from my GT-P1000 using XDA Premium App

skyyew said:
I will try it tonight.
Thanks you very much.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
no prob , and you better watchout during you flash ... and hope u know how to flash it ~~

i flashed it but when i go to recovery mode it show ups
E: MBR Checksum Error
InternalMMc checksum verify failed
then i continue to wipe cache partition,then wipe data/factory reset,then reboot
everything seems going fine.i can make calls,install app and etc..
just wondering what is happening in the internal sys?

if its worked fine , its ok .. but i think its DBDATA problem .. SAMFIRMWARE.COM is sucks

skyyew said:
i flashed it but when i go to recovery mode it show ups
E: MBR Checksum Error
InternalMMc checksum verify failed
then i continue to wipe cache partition,then wipe data/factory reset,then reboot
everything seems going fine.i can make calls,install app and etc..
just wondering what is happening in the internal sys?
Click to expand...
Click to collapse
Most of us have that as well. Aside from that some users have pda phone csc versions missing when queried thru #1234#

i'm from malaysia too and using 2.3.3 gtab with no problem....rooted n cwm
Sent from my GT-P1000 using XDA Premium App

Will try it and see any prob occur.hopefully nothing happen.
Sent from my GT-P1000 using XDA Premium App

flash to dxjpd and *#1234# csc and pda missing... can the tab work normal without it?

aycynokia said:
flash to dxjpd and *#1234# csc and pda missing... can the tab work normal without it?
Click to expand...
Click to collapse
the tab can operate without it, though you might get errors when using it with kies.

[Q] CSC Change Using CWM?(SOLVED)

I have tried CF-root and DiP7 kernel to root gingerbread and was successfully rooted. However I found out that changing the CSC(using *#272*IME#) will result in efs errors as instead of going to CWM recovery after installing new CSC it goes to the default recovery.
So is there a way to change the csc in CWM recovery? or otherwise let the csc change reboot to CWM recovery?

Why do you need to change your csc?
There is an app called market enabler that spoofs any csc you need to get market apps and samsung apps.

rangercaptain said:
Why do you need to change your csc?
There is an app called market enabler that spoofs any csc you need to get market apps and samsung apps.
Click to expand...
Click to collapse
+1
I highly recommend Market Enabler as opposed to playing around with your CSC which may often lead to undesired apps appearing on your phone. Market Enabler works very well and gives you the ability to change [fake] CSC on the fly at will instead of having to flash something to your device

rangercaptain said:
Why do you need to change your csc?
There is an app called market enabler that spoofs any csc you need to get market apps and samsung apps.
Click to expand...
Click to collapse
Its got nothing to do with the market. In the Philippines there are 3 CSC-SMA(smart Comm.),GLB(Globe Tel.) and the generic XTC. Each will have different configurations. I want to be able to connect to any of the first 2 without any problem. That is why I want to try all CSC. If there is no solution then perhaps I will just stick to unrooted stock mode.
BTW, when I was with overcome gold this CSC problem was also there...

bro try this one: CSC_JPE
i have set it to XTC.
copy to internal sd card and then flash with cwm
after the reboot, go to settings>mobile networks>APNs>Reset To Default.
hope this helps bro.

yes thanks bro I know now how to edit the CSC on that file and any other firmware...

May I ask how to change CSC inside these CWM zip file, to get the one I want such as XEV or is there other way instead of using the magic code in dialer, which does not work with CWM?

What was the last rom that had the csc's you needed? I have downloaded roms, un-tarred them, and extracted files and .apk's to get features I needed.

For the DXJPE tar extract the cache.rfs file then further extract the contents.I used 7-zip to do this. You will have 2 folders META_IMF and system. Open the system folder,then the subfolder csc. You will find an XEV folder.Open this XEV/system/csc and copy all the files. Then go back to main folder /system/csc and paste the copied files there.
Archive the modified system folder and the META_IMF into a zip file and name the zip file like CSC_JPE.zip ,copy it to the tab internal SD and install this in CWM recovery.....
You can also edit the zip file provided by noxxious if you don't have the tar file. Same method as above but you have to change the default csc to XEV. you will see this in sales_code.dat on the system/csc folder.

Great explanation. So glad you resolved the problem.

noxxious said:
bro try this one: CSC_JPE
i have set it to XTC.
copy to internal sd card and then flash with cwm
after the reboot, go to settings>mobile networks>APNs>Reset To Default.
hope this helps bro.
Click to expand...
Click to collapse
bro do you have a csc SMA?

ryn888 said:
bro do you have a csc SMA?
Click to expand...
Click to collapse
uploading one now..
CSC-JPE-SMA

noxxious said:
uploading one now..
CSC-JPE-SMA
Click to expand...
Click to collapse
Thanks man. Thanks a lot. You're the man!
Sent from my GT-P1000 using Tapatalk

noxxious said:
uploading one now..
CSC-JPE-SMA
Click to expand...
Click to collapse
Bro noxxoius i already download your csc jpe sma. When i flash it. Its done already but when i connect it thru kies it does not recognized because its still KOR. Not SMA. Help me bro.
Sent from my GT-P1000 using Tapatalk

noxxious said:
uploading one now..
CSC-JPE-SMA
Click to expand...
Click to collapse
Bro can you help me please....
Sent from my GT-P1000 using Tapatalk

ryn888 said:
Bro can you help me please....
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
you could try editing your sales_code.dat and change KOR to SMA.
its found in system/csc/

noxxious said:
you could try editing your sales_code.dat and change KOR to SMA.
its found in system/csc/
Click to expand...
Click to collapse
Dude i already do it but still kies recognize it as KOR.
Sent from my GT-P1000 using Tapatalk

after flashing the csc files, try using the 272imei command to change your csc to sma , you will encounter errors when it enters recovery but you should be fine afterwards as you already flashed the SMA files...

noxxious said:
after flashing the csc files, try using the 272imei command to change your csc to sma , you will encounter errors when it enters recovery but you should be fine afterwards as you already flashed the SMA files...
Click to expand...
Click to collapse
Dude, when i type *#272*imei# then press call. It says connection problem or invalid mmi code.
Sent from my GT-P1000 using Tapatalk

ryn888 said:
Dude, when i type *#272*imei# then press call. It says connection problem or invalid mmi code.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
If you entered the correct IMEI you don't need to press call. The csc code select menu appears just after pressing the last #
Sent from my GT-P1000 using Tapatalk

[Q] accidently bricked SGS using Odin

Hey Guys,
I hope this is not a complete repost
I have a samsung Galaxy s i9000 and i installed a custom gingerbread 2.3.4 ROM yesterday, all worked fine, but was unable to receive phone calls so i tried reflashing my phone to see maybe it was installed incorrectly.
Im not able to get into recovery mode but i am able to get into download mode.
So i installed Odin, and a .pit file that someone recommended. earlier i downloaded a .tar file that was compatible with my phone.
Everything went fine and it said it was successful, but im now stuck on a black screen with nothing but download mode.
My question to you is:
What files do i need to download inorder to get it to boot, and then allow me to flash to a gingerbread version on android.
I have a 512.pit file, i just need all the other odds and ends like a PDA, phone, CSC files.
Please please help me.
Thanks you for your time.

The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App

falcons2 said:
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
hi,
The question is, where did you get your stock ROM from, what files did you use? cause I have no clue what files to use just to get the phone going again.
Thanks thou

I just went to the xda website and found the stock rom forum and then I just picked one and flashed it with odin
Sent from my SGH-T959V using XDA App

try to reflash back with another rom and with .pit dont forget to REPARTITION CHECKED
Sent from my GT-I9000 using XDA App

http://forum.xda-developers.com/showthread.php?t=846913
[REF] Stock Firmwares for Samsung Galaxy S I9000 series - Download Only
Sent from my GT-I9000 using Tapatalk

Thanks guys for all your comments, i have successfully flashed and got everything working, yes there is a BUT!!!!
its in a different language, its still in the setup mode, i dont want to do anything unless i know that i can change it.
anyone got a screeny for me of where and what icon to press to select English as my primary language.
Thanks

ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks

SLYLUX said:
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
Click to expand...
Click to collapse
im on indonesia (asia) use europa rom
Sent from my GT-I9000 using XDA App

Urgent help needed please!!!

Hi all.
My wife hqs a I9003. She was running rooted stock 2.2.1 KB1FW on it. Everything was fine untill about 4 days ago. Thay's when without reason the whole Android system started to fail. Clock, Maps, Messaging, TW Launcher, etc all gave error and forced closed. She only had about 10 or 15 apps installed and all on phone memory. So I did a Factory Restore thinkg it would help but it was all still the same.
So I flashed KPE (all 4 files) and a new error started: after 1 or 2 after the factory restore on new FW, phone crashes and goes in to a boot loop (Samsung logo and intro screen). Once I manage to get back to Android, it's reset to factory settings (install wizzard). I've flashed KPH, KB1, KB3 etc and it's the same problem all the time. Was flashing the APBOOT file from KPE a mistake?? How can I fix this?? I don't have a backup and even if I did, I can enter download mode but not restore mode (Vol Up + Home + Power).
Please, I need help urgently
Thanks
Sent from my GT-I9000 using XDA App

Before this all started did she install some unknown kinda software/app from the market?
Also while flashing did you use Latona.pit file?
Sent from my GT-I9003 using Tapatalk

Nope. Thay's the weird thing. On mine, I'm constantly installing/deleting from the market, blackmarket and other sources and have no problems. All the apps she had, I installed myself and were all "safe".
As far as the pit file, I used it first joint with the other 4 files (like I did for my I9000) and after I used it on it's own. I've tried first the pit file, then the FW files, just the FW files and the pit + FW files with and without re-partition checked... I'm running out of ideas and getting desperate...
Sent from my GT-I9000 using XDA App

Sounds to me like the phone has developed a hardware fault.
Things do just up and die sometimes..

Could it be the battery??? She hasn't dropped or banged it at all. Mine had a slight swim.and is still perfect. If I flash it back to a European KB1, would the warranty still cover me??
Sent from my GT-I9000 using XDA App

Try to do the following:
Select only latona (.pit) and repartition in odin. Put the phone in download mode and flash.
Next reset all. Select pda, modem, csc file from XXKB3 firmware. Dont choose repartition and flash.
hope it works
Sent from my GT-I9003 using Tapatalk

Tell me teh method what you followed to flash? Like first, the pit file with re-partion,auto-reboot and F.reset time checked. And, then, the other 4 file of the SAME Fw with the auto-reset unchecked. Also, Did you click on the reset button after flashing the pit file?

Try to do the following:
Select only latona (.pit) and repartition in odin. Put the phone in download mode and flash.
Next reset all. Select pda, modem, csc file from XXKB3 firmware. Dont choose repartition and flash.
hope it works
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Had done that before but just did it again. So far it has crashed once but didn't revert back to factory default this time and I now have the recovery mode again.
Tell me teh method what you followed to flash? Like first, the pit file with re-partion,auto-reboot and F.reset time checked. And, then, the other 4 file of the SAME Fw with the auto-reset unchecked. Also, Did you click on the reset button after flashing the pit file?
Click to expand...
Click to collapse
I've done it various ways as I explained in the first post. With and without re-partition, with and without the pit file, etc.
But I had a minor brainwave this morning after the first crash on XXKB3. The microSD she had in her phone was an 8GB she got with her old Xperia. It was used under Symbian and when I put it in her Galaxy, I think I had formatted it with the PC but not with the phone. Can't remember (she has it since May). In any case, she didn't have apps stored on the SD but she did have all wallpapers, photos, music, ringtones, etc. I've now removed the SD and see how it goes. Just thinking that maybe the SD is f****d and could be creating a shortcut or inestability with the phone... Worth a try as I'm all out of ideas.
Thatnks to everyone for the help you're providing me with this issue. I suppose it's weird that after flashing many different ROMs the problem persists and is still the same. If all else fails and I re-flash the XXKB1, do yo guys think Samsung will take responasability for the problem?? I have it unlocked with the app thats on the market, but AFAIK I have the EFS folder backup stored somewhere.

Well phone still switching off with the XXKB3 FW. It's only switching off now tho... No boot loop. And at least now I know it's not the SD at fault. I'll try re-flashing XXKB3 tomorrow as I only flashed it once today. Then I'll do a factory format and reset battery stats once I flash the CWM. If after that it's still the same, I gues I'll have to restore the EFS folder, flash the XXKB1 FW and send it off to Samsung and hope for the best... Unless anyone has any other idea I can try???
Sent from my GT-I9000 using XDA App

i am not sure bout this but if you flash xxkph it shouldnt void varanty since its official rom? right o.o

xGiox said:
i am not sure bout this but if you flash xxkph it shouldnt void varanty since its official rom? right o.o
Click to expand...
Click to collapse
No. Anything that is done using Odin voids your warranty so when visiting service centre just flash to the firmware that your phone came out of the box then tell the service centre staff the phone just went crazy or anything like that just dont talk about Odin to them. And try this out.
1. Download an app called Rom manager from the market.
2. Make sure you are rooted.
3. Go into rom manager and hit fix permissions.
4. Reboot.
That should do it. Or else its the service centre.
Sent from my GT-I9003

crazbanditz said:
No. Anything that is done using Odin voids your warranty so when visiting service centre just flash to the firmware that your phone came out of the box then tell the service centre staff the phone just went crazy or anything like that just dont talk about Odin to them. And try this out.
1. Download an app called Rom manager from the market.
2. Make sure you are rooted.
3. Go into rom manager and hit fix permissions.
4. Reboot.
That should do it. Or else its the service centre.
Sent from my GT-I9003
Click to expand...
Click to collapse
i mean they wont know if he used kies or odin.

xGiox said:
i mean they wont know if he used kies or odin.
Click to expand...
Click to collapse
But if you dont come from russia which the csc says ser which is russia then they will know its definite you used Odin as there is no other ways you could get to a firmware of another region where you don't even come from using Kies unless you hacked Kies which also voids the warranty.
Sent from my GT-I9003

crazbanditz said:
But if you dont come from russia which the csc says ser which is russia then they will know its definite you used Odin as there is no other ways you could get to a firmware of another region where you don't even come from using Kies unless you hacked Kies which also voids the warranty.
Sent from my GT-I9003
Click to expand...
Click to collapse
LOL., you can say you travel to RUSSIAN..

madi3d8 said:
LOL., you can say you travel to RUSSIAN..
Click to expand...
Click to collapse
Then the warranty will be voided didnt you see they said warranty will be voided if not bought within the country or something like that.??
Sent from my GT-I9003

That is complex! In, India, You just go into the service center and tell him your problem! He will check the FW version and tell that you void warranty. Just SHOUT at him and tell him you are a developer ..VOILA! He will service it! He will take a hell lot of time for a small problem though!

And if I'm willing to pay for the repair?? Or maybe load a europe CSC file on it... Had a bit of a bright idea today: switch batteries. She's using my I9000's battery at the moment. Let's see if it doesn't turn off. My I9000 fell yesterday, had a rubber cover on it so the bang wasn't bad BUT my loud speaker has blown out seems easy enough to replace and I do laptop repairs so shouldn't be too much hastle to sort it myself. But so much for the Galaxy S being the iPhone 4 killer... Sem to be quite delicate phones...
Bit of off topic: anyone know anything about the Galaxy S 3??? If and when it's coming out and some type of details.. Galaxy S 2 was a big failure with more problems than the one I have according to what I've read on the internet...
Sent from my GT-I9000 using XDA App

DigiRay said:
And if I'm willing to pay for the repair?? Or maybe load a europe CSC file on it... Had a bit of a bright idea today: switch batteries. She's using my I9000's battery at the moment. Let's see if it doesn't turn off. My I9000 fell yesterday, had a rubber cover on it so the bang wasn't bad BUT my loud speaker has blown out seems easy enough to replace and I do laptop repairs so shouldn't be too much hastle to sort it myself. But so much for the Galaxy S being the iPhone 4 killer... Sem to be quite delicate phones...
Bit of off topic: anyone know anything about the Galaxy S 3??? If and when it's coming out and some type of details.. Galaxy S 2 was a big failure with more problems than the one I have according to what I've read on the internet...
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
1) Galaxy S3 will be launched once Nexus Prime is out (also being made out by Samsung)
2) Nexus Prime will be released some time in October so S3 will probably be released late October or sometime in November (more or less - to compete with iPhone5)
3) Galaxy S2 is one of the hottest selling item in the WORLD right now - i guess you have read some biased reports about its performance issues.

Just thought I'd give you all a quick update on what's happened with my wife's I9003.
After trying everything possible to fix it via flashing, the whole internal memory collapsed. It wasn't even able to finish installing the last firmware I flashed on it.
I took it to the shop, told them what happened and the sent it off to the technical repair service. That was on the 5th of this month.
Got it back today fully working!!!
They changed the main board as a faulty part, so even though it was unlocked with no EFS backup and was flashed numerous times, the guarantee took care of the repair
Tomorrow I'll root it and install ROM Manager and do a backup of the firmware before I flash it to Gingerbread, as they've returned it with Froyo and carrier boot screen. And this time I'll keep a backup of the EFS folder too LOL
I wonder is there anyway to force a main board to break via software, would be interesting for those that have voided their warranty by unlocking or flashing, if the board is broke, any changes become untraceable.
While I'm here, just a quick question: When I do the backup via ROM Manager, will it backup only the PHONE part of the firmware or will the MODEM & CSC be included too?? If it's only the PHONE file, how can I backup the others???
Thanks to all of you that responded to my original post and tried to help me with the phone.
Sent from my GT-I9000 using XDA App

Broke my Galaxy, Need Help

Hi, I own a Samsung Galaxy S i9000M from Bell. It is unlocked. Two days ago I was just using it (software: gingerbread) and it crashed. I tried restarting it and it just looped the startup. I removed the battery several times and it just wouldn't staert up.
So today, I tried to restore it with Odin, I think that I might've used the wrong PDA and actually messed it up more. Now it doesnt even loop it just stays black or these green and red dots come. However, I can still enter download mode.
How can I fix this? What are the correct files for my phone?
All replies are greatly appreciated!!

Try reflashing to last working ROM

How do I do that? I don't know to original firmware :S

http://forum.xda-developers.com/showthread.php?t=1102881 use the ugkg3 firmware under 2.3.3 north America. Follow instructions and use 512 pit. To repartition
Sent from my GT-I9000 using xda premium

vanisleryan said:
http://forum.xda-developers.com/showthread.php?t=1102881 use the ugkg3 firmware under 2.3.3 north America. Follow instructions and use 512 pit. To repartition
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Downloading it right now, thanks for the tip.
Does anyone have any idea why my phone broke in the first place?

Where can I find Pit 512? Thanks for the help so far btw

OK, I found all the files and extracted them but they're all 0 bytes? What do I do now?

Don't know why they are 0 bytes but those are the files you need. Not sure where you live in Canada but I'm in Victoria if that helps you at all I can flash it for you.
Sent from my GT-I9000 using xda premium

Downloaded the newest version of WinRar and they extracted properly . Flashing my phone as I type this message. Fingers crossed :x

Flashed it to the files you said. It is back to original broken state. The startup loops. Atleast I fixed my mistakes from yesterday, going to get it checked out by a phone tech.
Error codes were:
Cache wipe failed
Data exsist but some failed (cant remember this one good)
I recorded what the failure codes were if you need the specific ones. Further help will be greatly appreciated.

It shouldn't be on a bootloop if you flashed it correctly...
Only times I had bootloops I just reflashed 2.3.6 XXJVZ via Odin which always worked even when I thought I screwed it up completely. As long as you can enter the download mode, when you have the right files to flash you should be able to fix it.

The boot loop originally happened randomly when I was on stock firmware. Could this mean that a piece of hardware is broken?

http://forum.xda-developers.com/showthread.php?t=940671
I've never had to use this myself but I've heard of it getting guys phones working. Flash it in odin as directed. Then once working re flash the kg3 firmware. Gl
Sent from my GT-I9000 using xda premium

never broke the phone before, but you could try to reflash back to other official ROMs, my friend tells me that it works