Hi There,
I am using ICEDroid for almost a week. its working GREAT. Just one problem i am facing. in case of call waiting, when the second call arrives, the phone rings and vibrates disturbing my initial call. any one experiencing the same?
You made sure the phone uses 1 function when calling, i.e. only "go phone" or standard phone function?
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
Okay so when I'm on a call, I get another call. I answer the second call. I can switch back and forth between the 2 calls no problem. The problem is when the caller on hold hangs up. When they hang up it ends both calls. If I look at the screen it says "Radio Off", but the signal strength in the status bar doesn't change.
I've running CM 4.2.6 and have seen this in 4.2.5... I also have Missed Call (not sure if it's related) running. To be honest I don't know if this bug was here prior to running the CM mod or not. I'm using a Dream (32b).
Next time I get a call waiting call, I'll try hanging up first before they do to see if it ends both calls still. Normally I just switch to the call I want to resume and let the other party hang up.
If you have a problem that is ROM specific, post the issue within the ROM's thread. Do NOT create a new thread for the issue.
Just curious...
I've had the phone for just over a week, and have the Kang-O-Rama bundle installed. Overall, it's awesome...
What I have noticed though is that there doesn't appear to be a tone for incoming call waiting. A couple of days ago I noticed I had a missed call/VM after I hung up on my current call. I tested it out by calling a friend and having another friend (who was with me) call me while I was in the call. There was no audible notification while in call.
I then activated the "vibrate incoming call waiting" or whatever option and that appeared to work, but still no tone. And even the vibrate may be hit and miss, as I missed another call today while on a call.
Does the Nexus One not have a call waiting tone? Is it buggy? Is it the CM ROM?
yes I am having same problem but I am using home rom.
I think I have seen this, but not quite what you describe. my phone beeps only the first time for call waiting, then it stops. maybe this is the way its supposed to be cause I like it like that.
Is your in call volume on low and is it enable in the settings? Setting-call settings-additional settings-call waiting checked.
Hi
I've searched through this and other forums for a solution, but couldnt find one, although similar problems have been encountered.
I'm using a CM9 Slim series Rom (developer thread here). All seems to be good, except for the fact that all incoming calls are being dropped immediately. On the device, the call log does show a call was received, but the phone never rings, neither does the incoming call screen appears. Apart from the call log, there is no sign of the call.
On the callers side, the phone rings for half a second after which it is disconnected.
I approached the developer of the Rom (A_U) for some assistance, but havent heard back from him yet. I've also provided logs for this problem which you can see here.
If anyone knows any fix for this problem, do post. This rom would be useless for me without being able to receive call, even though everything else is supersmooth.