Database Develop

Big Problems!!! System is freezing all the time!

Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english

DerGregen said:
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
Click to expand...
Click to collapse
Flash from bootloader. Make sure you're hard SPL though, or that it's a compatible ROM for your CID.

have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?

manuv1615 said:
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
Click to expand...
Click to collapse
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....

DerGregen said:
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
Click to expand...
Click to collapse
You said that you could enter bootloader menu right?
now tell me, whats written there?
i'll wait here,.

Theres a 4 colour screen (red, green, blue and white)
And in the red bar is a text with a yellow font:
KAIS139 MFG
SPL-1.0.0liPof
CPLD-8
And below in the withe bar stands "Serial" or "USB.

What rom did you use?
try HardSPL 3.56 by jockyW,.
then reflash your ROM,.

[Q] need a little help if possible

my tilt 2 want boot its stuck on a red white green and blue screen

What was the last thing that it was doing when it was working properly ? Does it have a stock ROM or a custom/cooked ROM ? What have you tried to get out of it, e.g. soft reset, hard reset ?

adamcoop22 said:
my tilt 2 want boot its stuck on a red white green and blue screen
Click to expand...
Click to collapse
It'll stay there, too, unless you give us something to work with.

Well my pc want recogonize it ive tried a soft reset and ive tried a hard reset with the button combination and it want do it and imm running a custom rom
Sent from my SAMSUNG-SGH-I897 using XDA App

Does it say "Serial" at the bottom of the tri-coloured screen, when not plugged in ? And then when you plug it into the PC, does that change to say "USB" ?

Yes it does
Sent from my SAMSUNG-SGH-I897 using XDA App

adamcoop22 said:
Well my pc want recogonize it ive tried a soft reset and ive tried a hard reset with the button combination and it want do it and imm running a custom rom
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
yes its doin that

If it says USB at the bottom of the screen while plugged in, then just flash a new ROM. It's that easy. If it gives you a connection error, then either turn off your firewall or drop the RHODIMG.nbh file onto the root of your storage card and then put it back into the phone. Boot back into the bootloader (tri-colored screen) and it will flash for you that way. Once it flashes, do a hard reset, and then start setting everything back up.

thanx guys for the help

Stuck at Odin

I installed a kernel and phone started giving me bootloops. Then I downloaded official i9000 firmware and tried to install it via odin. But there is not any progress on Odin screen, after I click start the first box says "set partition".
What should I do now, unplug and do it again?

you can end up with hardware problems(internal memory) if you do so
for new firmwares( > 2010) you dont need to do repartition anymore using odin.the blue bar on your phone is visible?

hackandmore said:
you can end up with hardware problems(internal memory) if you do so
for new firmwares( > 2010) you dont need to do repartition anymore using odin.the blue bar on your phone is visible?
Click to expand...
Click to collapse
After waiting for some time for an answer, I unplugged the cable and tried again. This time worked, no problems. The bar was unvisible on the phone, it was just saying downloading. I hope it won't be a problem.

Remics-JB USB-Connection problem

Hi all!
I have huge problems with establishing USB-connection with my I9000 to PC.
I'm using Remics-JB 3.0.1.
When I connect my phone via USB-cable to PC, error message "System-UI needs to be closed" appears. Notification bar is then gone. After 5-10 seconds notification bar is back and it begins with the error message again. This loop continues even when the phone gets disconnected from PC. Only way to end this is a reboot. PC doesn't see the phone at all. On Remics-JB 2.x everything was fine.
I already tried to do one more clean flash (all wipes etc.) and use other kernels. No effect.
I would be grateful if someone could repost this to here: http://forum.xda-developers.com/showthread.php?t=1804032 because I'm not allowed yet to post to devs threads.
Thanks

ddc87 said:
Hi all!
I have huge problems with establishing USB-connection with my I9000 to PC.
I'm using Remics-JB 3.0.1.
When I connect my phone via USB-cable to PC, error message "System-UI needs to be closed" appears. Notification bar is then gone. After 5-10 seconds notification bar is back and it begins with the error message again. This loop continues even when the phone gets disconnected from PC. Only way to end this is a reboot. PC doesn't see the phone at all. On Remics-JB 2.x everything was fine.
I already tried to do one more clean flash (all wipes etc.) and use other kernels. No effect.
I would be grateful if someone could repost this to here: http://forum.xda-developers.com/showthread.php?t=1804032 because I'm not allowed yet to post to devs threads.
Thanks
Click to expand...
Click to collapse
Did you flashed anything after flashing the rom?
FYI - you should have asked the question in q/a section rather than general section.

erpurohit said:
Did you flashed anything after flashing the rom?
FYI - you should have asked the question in q/a section rather than general section.
Click to expand...
Click to collapse
just gapps, nothing more...

try re flashing rom

erpurohit said:
try re flashing rom
Click to expand...
Click to collapse
Done...no changes

did you wipe data or just reflashed...

erpurohit said:
did you wipe data or just reflashed...
Click to expand...
Click to collapse
Data wipe, cache, dalvik - did allof them...also did it before (1st post).
UPD.: I also flashed Circle Battery Mod from Update Me...but on V 2.x everything also worked fine with it...

Just flashed the ROM one more time WITHOUT flashing this Circle battery mode - USB connection is OK!
Never thought this mod would cause such problem

ddc87 said:
Just flashed the ROM one more time WITHOUT flashing this Circle battery mode - USB connection is OK!
Never thought this mod would cause such problem
Click to expand...
Click to collapse
That's what mate the circle mod from update me is old one.... if you want the circle mod then use from from the add on site.

Problem on Charging the battery

Hello,
I faced a problem about 2 weeks ago till now.
It is When try to charging my HTC ONE, when the battery is about 90%, 90% to 100% gone very fast and the LED shows green. But when unplugged and plugged the charger again, percentage of battery dropped to about 90% - 91% and it charged fast to 100% again.
When I let its remain on green status and plugged, after about 10 minute, my device charged fully (I tested it again: first unplugged the charger then re-plugged. Battery status dropped to 99% and after 30 sec it shows fully charged)
What is the exact problem?
Thanks

You could try to calibrate it with app from play store. https://play.google.com/store/apps/details?id=com.ignisoft.battery.calibration
Sent from my HTC One

komsboy_more said:
Hello,
I faced a problem about 2 weeks ago till now.
It is When try to charging my HTC ONE, when the battery is about 90%, 90% to 100% gone very fast and the LED shows green. But when unplugged and plugged the charger again, percentage of battery dropped to about 90% - 91% and it charged fast to 100% again.
When I let its remain on green status and plugged, after about 10 minute, my device charged fully (I tested it again: first unplugged the charger then re-plugged. Battery status dropped to 99% and after 30 sec it shows fully charged)
What is the exact problem?
Thanks
Click to expand...
Click to collapse
i've the exact same problem, did you find a fix?

muhammad.uzi1994 said:
i've the exact same problem, did you find a fix?
Click to expand...
Click to collapse
No dude ....
I calibrate with 2 suggested apps but no chance! As I'm S-OFF I want to try flash with a RUU then upgrade to latest stock ROM and test this as I have free time to work on...
If I find a solution , sure let you know. (also you )

komsboy_more said:
No dude ....
I calibrate with 2 suggested apps but no chance! As I'm S-OFF I want to try flash with a RUU then upgrade to latest stock ROM and test this as I have free time to work on...
If I find a solution , sure let you know. (also you )
Click to expand...
Click to collapse
ok thanks, keep me updated

muhammad.uzi1994 said:
ok thanks, keep me updated
Click to expand...
Click to collapse
Is there any solution found?

oksagi said:
Is there any solution found?
Click to expand...
Click to collapse
Not yet !
I flashed my phone with RUU and re-upgrade to latest 4.3, but no chance !
I calibrated with a app and waiting to discharge and re-charge it again to check.

komsboy_more said:
Not yet !
I flashed my phone with RUU and re-upgrade to latest 4.3, but no chance !
I calibrated with a app and waiting to discharge and re-charge it again to check.
Click to expand...
Click to collapse
Can you charge your phone with USB connected to PC? can you use it with MTP protocol to explore the folders on PC?

oksagi said:
Can you charge your phone with USB connected to PC? can you use it with MTP protocol to explore the folders on PC?
Click to expand...
Click to collapse
Yep, but as you know charging with USB that is plugged to computer need more time.
Also can explorer mass storage with windows when my phone is plugged via USB.

komsboy_more said:
Yep, but as you know charging with USB that is plugged to computer need more time.
Also can explorer mass storage with windows when my phone is plugged via USB.
Click to expand...
Click to collapse
The reason i'm asking is, I have an issue almost 2 weeks, i cannot connect my phone to PC, neither charge it form PC.
and now i have to issue to charge to the top.

oksagi said:
The reason i'm asking is, I have an issue almost 2 weeks, i cannot connect my phone to PC, neither charge it form PC.
and now i have to issue to charge to the top.
Click to expand...
Click to collapse
Are you using a pc suite manager application like "MOBOROBO" ? If yes, try uninstall, reboot, download latest version and re-install it.
Also you can try do it on HTC driver.

komsboy_more said:
Are you using a pc suite manager application like "MOBOROBO" ? If yes, try uninstall, reboot, download latest version and re-install it.
Also you can try do it on HTC driver.
Click to expand...
Click to collapse
already tried

oksagi said:
already tried
Click to expand...
Click to collapse
So test it on another PC or Laptop...did you ?

komsboy_more said:
So test it on another PC or Laptop...did you ?
Click to expand...
Click to collapse
sure,
this is not issue related PC it's something with the device.
maybe the usb port is damaged ;(

oksagi said:
sure,
this is not issue related PC it's something with the device.
maybe the usb port is damaged ;(
Click to expand...
Click to collapse
or ...maybe the cable !

komsboy_more said:
or ...maybe the cable !
Click to expand...
Click to collapse
Already tried 3 cables

oksagi said:
Already tried 3 cables
Click to expand...
Click to collapse
So I think you should go to check the device by HTC CARE Center

I wiped my cashe partition and after that I see the 99% till 96% again for example.
Also slightly lower discharing.
Instructions for the international unbranded version of the HTC One:
If he still has the same inconvenience after trying it several times, we also suggest him to perform a wipe cache partition. This process gets rid of all the temporary, unnecessary and junk data that slows down your phone and eventually causes to freeze or crash. It can also cause malfunction on the devices hardware such as the camera, internal memory or as it is in this situation the symbol described.
To do so please follow the steps bellow:
- Disable fast boot (Settings > Power > Fast Boot)
- Power off the device
- Press and Hold Volume Down while your device is off
- Briefly tap the Power button until Hboot appears (The white screen with three Android characters).
- Tap Volume Down to highlight recovery
- Tap the Power button
- When you see a screen with a red triangle and an exclamation point hold Volume Up
- Tap Power this will bring up the hidden recovery menu
- Tap Volume Down to highlight "Wipe cache Partition"
- Tap power to begin this process
- Once reboot system now appears tap Power.
Click to expand...
Click to collapse
Source: https://community.sprint.com/baw/message/603527#603527