Database Develop

[Q][HELP] Galaxy s GT-I9000 Issues with Upgrading firmware. please help

Ok so i would like to update my galaxy to 2.3 gingerbread official using keis.
I live in Australia and based on what i have read the update should be out on my model of galaxy. When i plug my phone into keis it is saying i have the latest firmware. I have done some reading up on this and if i am correct some of the hacks and things i have done to my phone could cause it not to be able to update and i would like to know if this is true and how i can fix this.
Things i have done:
- I am currently running 2.2 froyo
- I have voodoo lagfix and soundfix installed.
- I used sgs tools from market to use the optus apps which came with my phone that where unusable since i was with virgin.
- I applied a 3 button fix i found as well so i could update voodoo easier. But in the end i just used Odin.
One thing i read was that i have to restore the system apps to update it. which i have done with all accept one but the .apk backup for it is not working so i cannot. Will i have to use Odin and revert back to the original firmware and start again? Or is there something i can do from here?

Short answer- You can't.
Gingerbread isn't out officially anywhere at present (there was a brief period where it was out on Kies for Scandinavia- hence all the semi-official "leaked" roms).
On past performance we're likely to be waiting a fair while here in Oz- once Official GB Roms come out from Samsung you then have to wait for all the local carriers to add their garbage to it (and - according to them- "test" it) before it gets released on kies. I'd bite the bullet and just grab a nice rom from here.
Remember if you do decide to wait for the official update, you will have to downgrade to stock for kies to recognise your right to an upgrade.

+ 120 to that NO upgrade to 2.3.3 YET .
All upgrades are unofficial .When Kies has your upgrade it upgrades
Then before update undo lagfix .
Or to be really safe reinstall your original saved rom the one you saved before you started messing with the phone .
jje

I think using odin to flash a stock rom back before updating by kies would be safe way

myfifth said:
I think using odin to flash a stock rom back before updating by kies would be safe way
Click to expand...
Click to collapse
Depends Kies does not recognize stock rom as product code etc dont match = no update through Kies . Stock is not network supplied firmware as original .
jje

JJEgan said:
Or to be really safe reinstall your original saved rom the one you saved before you started messing with the phone .
jje
Click to expand...
Click to collapse
Lets just say I'm a total wanker and I didn't save my original rom. Am i stuck using custom roms from now?

Zeruf said:
Lets just say I'm a total wanker and I didn't save my original rom. Am i stuck using custom roms from now?
Click to expand...
Click to collapse
pretty much, unless some one has official firmware

[Q] Rooted Galaxy won't update to Gingerbread

Hi people,
I don't know if it's me, or just my lack of knowledge as to topics on this problem..
I have Rooted my Galaxy-s because i didn't want the lot of standard apps, that worked really well..
After this i used KIES to update to Android 2.2.1, works fine!
Now i've been waiting for Gingerbread for so long, and according to Android, i should be able to update Over The Air.. but noooo..
KIES keeps telling me i have the latest Firmware installed.. but it clearly isn't..
My conclusion: i think i can't update because my phone was Rooted? PLEASE correct me if i'm wrong, which i hope to be the case..
I've tried factory reset on my phone but of course it stays Rooted..
Do i need to UNROOT my phone? Can't remember which programme i used to Root it so that doesn's help
Is it me, or am i just unlucky.. or maybe i just don't know enough about Rooting?
So, can anyone tell me how to install Gingerbread on my Rooted Galaxy S ?
Currently its running Android 2.2.1, Smallbandversion (whatever that means) is I9000XXJPY
Build number: FROYO.XWJS5
Sorry if this is the 100th topic on this, but i really digged a lot throuh other topics..
Loads of thanks in advance!

No, nothing to do with being rooted - won't make any difference.
Firstly ota updates not activated for sgs yet (ever?). Official updates are only available via kies dependent on your region and carrier, so you may be running the latest firmware for your combination of phone, region and carrier. gingerbread has only been released for a couple of nordic countries so far. if all goes well the rest of europe are expecting a general release very soon.
For the rest we are dependent on spoofing kies into thinking we are in region NEE (FINLAND) or flashing via odin. So you either spoof kies, flash via odin our sit tight and wait. But ota definitely not
Sent from my GTI9000 using XDA App, gingerbread 2.3.3 jvh rooted, ADW launcher + gingerbread theme

kipdeontdekker said:
Hi people,
I don't know if it's me, or just my lack of knowledge as to topics on this problem..
I have Rooted my Galaxy-s because i didn't want the lot of standard apps, that worked really well..
After this i used KIES to update to Android 2.2.1, works fine!
Now i've been waiting for Gingerbread for so long, and according to Android, i should be able to update Over The Air.. but noooo..
KIES keeps telling me i have the latest Firmware installed.. but it clearly isn't..
My conclusion: i think i can't update because my phone was Rooted? PLEASE correct me if i'm wrong, which i hope to be the case..
I've tried factory reset on my phone but of course it stays Rooted..
Do i need to UNROOT my phone? Can't remember which programme i used to Root it so that doesn's help
Is it me, or am i just unlucky.. or maybe i just don't know enough about Rooting?
So, can anyone tell me how to install Gingerbread on my Rooted Galaxy S ?
Currently its running Android 2.2.1, Smallbandversion (whatever that means) is I9000XXJPY
Build number: FROYO.XWJS5
Sorry if this is the 100th topic on this, but i really digged a lot throuh other topics..
Loads of thanks in advance!
Click to expand...
Click to collapse
Try this, it's how I went from JPY to JVB
http://forum.xda-developers.com/showthread.php?t=1037584

As i thought, thanks to both!! I was a bit worried i c*cked up my phone there, but this tells me it's again down to lazyness on Android or Samsung's side..
I've been waiting so long so i got impatient and shovelled trough about all of the topics, but now combining your two replys, i think ill have a go with the NEE version then?
Beeing in Holland we'll just have to make do with a nice Finland version then that will make it interesting since Finnish is THE most weird written language there is, what with all the iiiimouyoniiisuomi and all but i trust it to have an English layout as well?
Ehm, i don't know the meaning of the term "Spoofing", is that a way to crack Kies somehow?
Again, BIG thanks to you! I will try the link and hope for the best, if it won't work i'll just have to be patient (so more).. Good thing beeing in Holland there are means to alter perception of time..
Thank you guys!

kipdeontdekker said:
As i thought, thanks to both!! I was a bit worried i c*cked up my phone there, but this tells me it's again down to lazyness on Android or Samsung's side..
I've been waiting so long so i got impatient and shovelled trough about all of the topics, but now combining your two replys, i think ill have a go with the NEE version then?
Beeing in Holland we'll just have to make do with a nice Finland version then that will make it interesting since Finnish is THE most weird written language there is, what with all the iiiimouyoniiisuomi and all but i trust it to have an English layout as well?
Ehm, i don't know the meaning of the term "Spoofing", is that a way to crack Kies somehow?
Again, BIG thanks to you! I will try the link and hope for the best, if it won't work i'll just have to be patient (so more).. Good thing beeing in Holland there are means to alter perception of time..
Thank you guys!
Click to expand...
Click to collapse
Graag gedaan
The NEE version definitely includes English and I'm fairly sure it includes Nederlandse too. Spoofing is a way to fool Kies into thinking you have a different firware/region, I've tried it and find it a messy way to upgrade. Just search spoofing Kies if you want to learn more about it. Personally I use use Odin 1.3, it's very easy to use, first make sure you can access recovery/download using the 3 button combo, and just to be safe, track down a stock version of the ROM your currently on in case you ever need it. JVH is also out now (a newer version, you'll find the thread here easily). I can't see any reason why it wouldn't work for you, just read through the guide a couple of times until you have it straight in your head, and if you're not sure about anything just ask, lots of good people on here willing to help others.
Mmmm lekkere blowtjes.....that takes me back

hi i was running a rooted galaxy on the ultimate rom ,conected to keis on monday this week and got the latest gingerbread 2.3.3.
i also flashed EZBASE rom and kies updated

westentertainer said:
hi i was running a rooted galaxy on the ultimate rom ,conected to keis on monday this week and got the latest gingerbread 2.3.3.
i also flashed EZBASE rom and kies updated
Click to expand...
Click to collapse
I've seen a few people post that gave them updates when they were using custom ROMs, but even if I flash a kernel on a stock ROM it tells me this version of the device cannot be updated. Kies is weird.

Kies updates official firmware only and will not update custom or stock roms .
But sometimes it gets in a muddle and does but very very rarely .
jje

Well i thought maybe ill give my provider a call, after that i called Samsung.. anyway it's a maze of menus and of course none of the official people (who should know) don't know jack sh1t.. Seems like only thing they know is how to get the cash out of your pockets..
good thing the people on this forum DO know what they are talking about!
so adding up your replies above, i still wanna go with the Finnish NEE version, so i downloaded it, and installed Odin 3 on my laptop,
drivers for my phone are allready installed so Odin recognised the device if i connect it in download moce, so far so good on that,
now its down to the PIP, and i think the PDA stuff where i need to select the .tar files.. ??
am i right? i watched the Odin tutorial on youtube 4 times now..
and i downloaded the GT_I9000_XXJVK_XXJVK_OXAJVK_Sbl file, which contains these files when extracted:
-CSC_OXAJVK.tar.md5
-PDA_XXJVK_Sbl.tar.md5
-PHONE_XXJVK.tar.md5
i think this is the Finnish NEE version
so, which files am i missing, and which ones should i load in Odin?
i know this must be getting old but i know you guys can help me talking me through
so again, big thanks in advance!

kipdeontdekker said:
Well i thought maybe ill give my provider a call, after that i called Samsung.. anyway it's a maze of menus and of course none of the official people (who should know) don't know jack sh1t.. Seems like only thing they know is how to get the cash out of your pockets..
good thing the people on this forum DO know what they are talking about!
so adding up your replies above, i still wanna go with the Finnish NEE version, so i downloaded it, and installed Odin 3 on my laptop,
drivers for my phone are allready installed so Odin recognised the device if i connect it in download moce, so far so good on that,
now its down to the PIP, and i think the PDA stuff where i need to select the .tar files.. ??
am i right? i watched the Odin tutorial on youtube 4 times now..
and i downloaded the GT_I9000_XXJVK_XXJVK_OXAJVK_Sbl file, which contains these files when extracted:
-CSC_OXAJVK.tar.md5
-PDA_XXJVK_Sbl.tar.md5
-PHONE_XXJVK.tar.md5
i think this is the Finnish NEE version
so, which files am i missing, and which ones should i load in Odin?
i know this must be getting old but i know you guys can help me talking me through
so again, big thanks in advance!
Click to expand...
Click to collapse
For starters I'd go with JVB or JVH instead of JVK, and as it's your first time flashing I'd use a single .tar version like the one at the top of this post http://forum.xda-developers.com/showthread.php?t=1037584
or one of these
http://forum.xda-developers.com/showthread.php?t=1011901
Both have the bootloaders so it's just handier.
You can also join samfirmware.com if you haven't already, plenty of firmwares there.
Once you have the single .tar on your desktop open Odin 1.3, click on the PDA button navigate to Desktop and select the appropriate file, (see pic attached).
Then put your phone in download mode using the 3 button combo and only then connect it to your PC. Wait for Odin to recognise the phone, when it does, press start and just wait for it to do its job. All going well once it's done it will reboot your phone, wait for the phone to finish rebooting before closing Odin and disconnecting.
If you still want to go ahead with the 3 .tar files you've already downloaded then look at the second link in this message, it has a good description of how to flash using the three files

that IS very helpful indeed!
now i even know in what order to do everything, its nice you explained it step by step so big thanks for that!
So, doing all steps gives my phone Gingerbead?
Im still puzzled as to why are there so many versions like XXJVB, XXJVH and all those? If it's all Gingerbread, does the correct version depend on which country youre in, or is it an updated version, or ar all of there totally different?
I just downloaded the GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe.crdownload
Thats the "NEE", so should work on my device i understand..
so i extracted it in a folder and again there are three .tar files;
CSC_NEE_JV3.tar.md5
PDA_XWJVB_Sbl.tar.md5
PHONE_XXJVK.tar.md5
so im guessing i only have to load the "phone" .tarfile into Odin?
i promise im not a 70 year old man, just a newcomer at flashing

kipdeontdekker said:
that IS very helpful indeed!
now i even know in what order to do everything, its nice you explained it step by step so big thanks for that!
So, doing all steps gives my phone Gingerbead?
Im still puzzled as to why are there so many versions like XXJVB, XXJVH and all those? If it's all Gingerbread, does the correct version depend on which country youre in, or is it an updated version, or ar all of there totally different?
I just downloaded the GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe.crdownload
Thats the "NEE", so should work on my device i understand..
so i extracted it in a folder and again there are three .tar files;
CSC_NEE_JV3.tar.md5
PDA_XWJVB_Sbl.tar.md5
PHONE_XXJVK.tar.md5
so im guessing i only have to load the "phone" .tarfile into Odin?
i promise im not a 70 year old man, just a newcomer at flashing
Click to expand...
Click to collapse
Ok so you're going with the three file flash, that means that in Odin you click on the PDA button and navigate to wherever you stored the PDA_XWJVB_Sbl.tar.md5 file, click the Phone button and find PHONE_XXJVK.tar.md5, then click CSC and find CSC_NEE_JV3.tar.md5.
BUT....
You are coming from 2.2.1 right? I really think you should use one of the single .tar files in the pic attached as you're so new to flashing, they definitely have the GB bootloaders which you need if you're flashing from Froyo. The pic is taken from the second link I posted earlier. I flashed a single .tar and didn't do a wipe or factory reset and didn't have any problems. Just get the JVB or JVH one and use the method I posted earlier.
I'm using JVB with no problems, but others think JVH is better.

DMD9 i thank you again for all info you posted!
I will take your advice to use a single file, since all this still feels like blindfolded surgery to me and i take it when using 3 files theres more to go wrong?
I downloaded the GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl --like you advised
But if i extract theres these three files in it, so i take it i only need to load the PHONE_XXJVK.tar.md5 in the PDA section ?
Which is the JVK.. the one you didn't reccomend
What makes a this file different from another? is it the features, or some country dependant thing? Or can i use this file, what are the drawbacks on this one?
Big thanks again!!

kipdeontdekker said:
DMD9 i thank you again for all info you posted!
I will take your advice to use a single file, since all this still feels like blindfolded surgery to me and i take it when using 3 files theres more to go wrong?
I downloaded the GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl --like you advised
But if i extract theres these three files in it, so i take it i only need to load the PHONE_XXJVK.tar.md5 in the PDA section ?
Which is the JVK.. the one you didn't reccomend
What makes a this file different from another? is it the features, or some country dependant thing? Or can i use this file, what are the drawbacks on this one?
Big thanks again!!
Click to expand...
Click to collapse
Check your PM

Another big thanks to you!
Downloading.........

kipdeontdekker said:
Another big thanks to you!
Downloading.........
Click to expand...
Click to collapse
No problem, happy to help

kipdeontdekker said:
Another big thanks to you!
Downloading.........
Click to expand...
Click to collapse
Should look like this...

YES!! it does look the same! its going somewhere!!
here are the two shots i made, one from Odin and one after extracting the JVB_JV3_JVK
I remember you saying it has to be on my desktop? so the folder would be my desktopfolder then..
Is this right?

kipdeontdekker said:
YES!! it does look the same! its going somewhere!!
here are the two shots i made, one from Odin and one after extracting the JVB_JV3_JVK
Click to expand...
Click to collapse
Excellent! You are now ready to flash Gingerbread.
Before you do it just go back and read over all the directions again then flash at your leisure
(The file didn't have to be on your desktop, it just makes it quicker and easier to find when you open Odin)

I'm relatively new to flashing as well (I've flashed about 8 times now, so I'm getting used to it lol) if you aren't sure about the naming of the different versions I.e. XXJVK etc. the best thing to do is join samfirmware.com. they have a page that explains what all those mean and how to understand what the basic firmware contains. It was a massive help for me.
Sent from my GT-I9000 using XDA App

[Q] [i9000] restoring to Stock - but which ROM?

Hi All,
I have a Galaxy S I9000 that I purchased from Optus (Australia) that I have been flashing with different ROMs quite happily. Unfortunately in my excitement I did not take note of the original versions.
I had a nightly build of CM7 on it but now that Samsung Australia have released Gingerbread I wanted to do a stock upgrade (with Kies) to try it out.
So I reverted to a stock 2.2 I got from the ezRom guide (can't post the link)
BUT, kies says that it is not updateable.
So then I tried to revert to a ROM that is supposedly an Optus one. I have flashed it to (According to KIES):
PDA:JP5 / PHONE:JP3 / CSC:JP4 (NEE)
Or from the phone:
PDA: I9000DTJP5
PHONE: I9000DTJP3
CSC: I9000XSAJP4
Build info: 2010.11
But Kies still says "This version of the device cannot be updated."
Is it because of the CWM bootloader (v2.3?)?
Any suggestions / ideas?
Many thanks in advance

Have you tried using ODIN for flashing?
Sent from my GT-I9000 using XDA App

Prateek G. said:
Have you tried using ODIN for flashing?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yes indeed. I used Odin to flash the ROMs.
Thanks.

Get this one: http://www.multiupload.com/CH3Y5SAHE2 (from http://forum.xda-developers.com/showthread.php?t=1102881)
This is the Optus Australia one

Bugger.......
bubblefighter said:
Get this one: http://www.multiupload.com/CH3Y5SAHE2 (from http://forum.xda-developers.com/showthread.php?t=1102881)
This is the Optus Australia one
Click to expand...
Click to collapse
Good suggestion, and it flashed OK and works OK, but, KIES still says it cannot be updated.
Should I flash the bootloader? It is CWM.
I wonder if KIES looks for the bootloader.

Kies is a huge pile of dung. Why bother messing with the bootloader when you've already flashed what you wanted?

tamaleddon said:
Kies is a huge pile of dung. Why bother messing with the bootloader when you've already flashed what you wanted?
Click to expand...
Click to collapse
Several Reasons:
1) I want to see what Samsung's "Official" version of Gingerbread is like.
2) CM7 bluetooth pairing is broken. I am totally over having to go through the pairing process every damn time I get in my car.
3) I have to go back at least to 2.2 at some point as I have lost access to my External Flash card.

ninereeds said:
Several Reasons:
1) I want to see what Samsung's "Official" version of Gingerbread is like.
2) CM7 bluetooth pairing is broken. I am totally over having to go through the pairing process every damn time I get in my car.
3) I have to go back at least to 2.2 at some point as I have lost access to my External Flash card.
Click to expand...
Click to collapse
You should be able to grab the stock fimware from samfirmware.com and flash it with odin, no?

Hi,
I have successfully just done what you are trying to accomplish. I don't have the links to these files anymore but if you can't find them I'd be happy to make them available for you.
Firstly flash GT-I9000_FROYO_FULL_PDA.tar as it has a boot loader.
Secondly flash GT_I9000_DTJP5_DTJP3_XSAJP4 which is the original stock.

this looks like the link for the froyo full PDA tar: http://www.multiupload.com/3FFWC68UMC
so does this work? I want to get back to stock Optus and similarly didn't take note of any original versions or do any nandroid backups. idiot!

[Q] Update i9000 from Stock 2.3.3 to Latest Gingerbread

Hi friends,
i was an iPhone user since 2007 but now i bought Samsung Galaxy S GT-i9000, it has "Movistar" logo on its back,
i m completely noob on Android so please guide me.
when i bought my phone it was on 2.0 Eclair then i connected my phone with my laptop with data cable and Samsung Kies.
After connecting:
Samsung KIES showed me Gingerbread Updates
So First KIES updated my phone to 2.2 Froyo
And then it updated it to 2.3.3 Gingerbread.
"""i have read many posts here and as far as i know i think i m on Stock firmware and i updated my phone using Official updates from Samsung KIES and one more thing i want to clear here is before updating my phone my SIM CARD was working perfect no issues and after updating my phone still my SIM CARD is working absolutely fine so i think my phone is fully Unlocked (Please Clarify if i m wrong)"""
So after that long time has been passed i am waiting for Official updates for my phone of Gingerbread 2.3.4 or above but did not find any.
i used 2.3.4 on my friend's phone it works much smoother and faster than 2.3.3 thats why i want to upgrade it unofficially because i cant update it officially.
Can you Please tell me the procedure to update my phone to the latest Gingerbread Stock version unofficially?
Here is what written in "About Phone"
Model Number: GT-I9000
Firmware Version: 2.3.3
Baseband Version: I9000BGJV1
Kernal Version: 2.6.35.7-I9000BGJV5-CL307695 [email protected]#2
Build Number: GINGERBREAD.BGJV5

I updated my sgs to 2.3.4 JVR which works great for me, and I used a guide on the website androidsoul.com to go step by step how to do it with odin, and if you search around a little there are plenty if guides here on xda as well
Sent from my GT-I9000 using XDA App

Which firmware should i go for there are so many
XXJVP = 2.3.4
XXJVR = 2.3.4
XXJVS = 2.3.5
and many more
And what is the difference between firmware with boot loader and firmware without boot loader ?
Sorry for so many questions i m new to Android.

you should go for XXJVS, or for XXJVT, i use a JVT ROM, and its pretty cool.
well, you always have a boot-loader... BUT, you should not flash a boot-loader, because that is one of the rare ways to really "brick" your phone.
the things you need, are odin, the .tar files you want to flash (you should find jvt or jvs here to download, as well as odin)
and just google for flash guide odin, or sth like that, after a few minutes you wil know what to do.
read carefully! and if some points aren't clear for you, don't bother asking.
(The reason why we don't write a full "how-to" is, because it is really done quite often and should not be hard to find)

I have flashed XXJVS Successfully and its working faster and stable than 2.3.3 its amazing. Thank you All for your Support
Sent from my GT-I9000 using XDA App

rev2008 said:
Hi friends,
i was an iPhone user since 2007 but now i bought Samsung Galaxy S GT-i9000, it has "Movistar" logo on its back,
i m completely noob on Android so please guide me.
when i bought my phone it was on 2.0 Eclair then i connected my phone with my laptop with data cable and Samsung Kies.
After connecting:
Samsung KIES showed me Gingerbread Updates
So First KIES updated my phone to 2.2 Froyo
And then it updated it to 2.3.3 Gingerbread.
"""i have read many posts here and as far as i know i think i m on Stock firmware and i updated my phone using Official updates from Samsung KIES and one more thing i want to clear here is before updating my phone my SIM CARD was working perfect no issues and after updating my phone still my SIM CARD is working absolutely fine so i think my phone is fully Unlocked (Please Clarify if i m wrong)"""
So after that long time has been passed i am waiting for Official updates for my phone of Gingerbread 2.3.4 or above but did not find any.
i used 2.3.4 on my friend's phone it works much smoother and faster than 2.3.3 thats why i want to upgrade it unofficially because i cant update it officially.
Can you Please tell me the procedure to update my phone to the latest Gingerbread Stock version unofficially?
Here is what written in "About Phone"
Model Number: GT-I9000
Firmware Version: 2.3.3
Baseband Version: I9000BGJV1
Kernal Version: 2.6.35.7-I9000BGJV5-CL307695 [email protected]#2
Build Number: GINGERBREAD.BGJV5
Click to expand...
Click to collapse
http://hdtechvideo.com/?p=54

geri.st said:
you should go for XXJVS, or for XXJVT, i use a JVT ROM, and its pretty cool.
well, you always have a boot-loader... BUT, you should not flash a boot-loader, because that is one of the rare ways to really "brick" your phone.
the things you need, are odin, the .tar files you want to flash (you should find jvt or jvs here to download, as well as odin)
and just google for flash guide odin, or sth like that, after a few minutes you wil know what to do.
read carefully! and if some points aren't clear for you, don't bother asking.
(The reason why we don't write a full "how-to" is, because it is really done quite often and should not be hard to find)
Click to expand...
Click to collapse
is this make warranty void..??

vnky12 said:
is this make warranty void..??
Click to expand...
Click to collapse
probably yes, but hea, you have a smoother phone, btw if you want to return it you search for the firmware you originally had, and you flash that, warranty back!

vnky12 said:
is this make warranty void..??
Click to expand...
Click to collapse
if you really mess up and brick your phone its mostly the same as if an update via kies fail and brick it

[Q] Help Required: KL7 upgrade

Dears,
I require help from you. My galaxy note has stock ROM and is very laggy.
PDA:KL3/PHONE:KL1/CSC:KL1(INU).
I read in some threads that with KL7 firmware, lag disappears completely.
i have few questions.
1. I want stock ROM and when i try to connect with kies, it says 'this is the latest firmware'. i bought this from India and Im currently in saudi arabia.
2.where will i get the STOCK ROM for KL7 and how to put in my note?
3. Will this 'unofficial' way clean up my data?or will my apps and setting remain as it is after update.
appreciate your replies.

khan.dharvesh said:
Dears,
I require help from you. My galaxy note has stock ROM and is very laggy.
PDA:KL3/PHONE:KL1/CSC:KL1(INU).
I read in some threads that with KL7 firmware, lag disappears completely.
i have few questions.
1. I want stock ROM and when i try to connect with kies, it says 'this is the latest firmware'. i bought this from India and Im currently in saudi arabia.
2.where will i get the STOCK ROM for KL7 and how to put in my note?
3. Will this 'unofficial' way clean up my data?or will my apps and setting remain as it is after update.
appreciate your replies.
Click to expand...
Click to collapse
1.This is latest ROM for India, thats why kies says.(you have purchased from india)
2. Read My signature
3.It has no relation with way you are updating, Dont select 'Re-partition' option while you flashing with Odin, so you will not lose data, but it is always advisable to backup first.
Now another thing, if you install KL7 by odin, you will not able to Root it later. If you want Rooted KL7, you need this
- Get ROOT + CWM in present ROM (read My signature)
- Install Mobile Odin Pro from market
- Now download Stock firmware, as i advised you earlier, n Flash your device with Mobile Odin Pro, with ' ever Root' option enable

thanku buddy

im sorry. but i downloaded a file N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME.tar.md5. now i see 4 options in ODIN: bootloader/phone/csc/pda. now where i should i associate this field.???
also since my csc is INU and this seems DBT is there anything should i b doing??? . pls gime detailed steps

just to select PDA, as you seen in guide.

got it right.upgraded to kl7. thank you dr.

I am confused. This is the latest firmware, but it is still carrier specific, correct?
Is there a firmware that is 'pure samsung galaxy note' which hasn't been manipulated by the carriers?

I guess KL8 is the latest firmware.

GNoteLover said:
I am confused. This is the latest firmware, but it is still carrier specific, correct?
Is there a firmware that is 'pure samsung galaxy note' which hasn't been manipulated by the carriers?
Click to expand...
Click to collapse
dont worry..it isnt..just update..

Hi khan.dharvesh. Can you please tell me did this KL7 upgrade solved your problem??
Plus, I want to know, can we upgrade this without rooting out phone?
Sorry but am absolute noob. Highest level of noob I would say, therefore I am asking such quesitons.

filthykid said:
Hi khan.dharvesh. Can you please tell me did this KL7 upgrade solved your problem??
Plus, I want to know, can we upgrade this without rooting out phone?
Sorry but am absolute noob. Highest level of noob I would say, therefore I am asking such quesitons.
Click to expand...
Click to collapse
Ok, so many new stock roms have come after that. so go and use
N7000XXLC1---------2.3.6-------2012 March----------N7000OXALC1----------Open Germany-----------------------------Download
from http://forum.xda-developers.com/showthread.php?t=1424997.