Hello guys, i have emanon v5 and the rom has overclock at 825 Mhz, i need a bit more. Like 865 (it's stable) and i don't know what kernel to flash. I don't want to broke to soft
I don't think you could do that... The only kernel I know above 825 MHz are the squad's kernels, but I believe they don't work with emanoN...
PS: Lucky basterd... my get stable only at 806 MHz.
Related
I use gingerdx v12 and can sometimes restart itself (unstable)
Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A
chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.
processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster
chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.
for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.
hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain
I was wondering,what is the best kernel for gaming?I already unlock my bootloader so I need a good custom kernel for game
i think alfsv5 with gingerdx..is great..and some dude said that most hd games work smoothly on 600 mhz
and i can figure that's right,,cuz i'm using it and it's smoother than froyo on 600 mhz
thanks,but is there any other kernel?
well there is naa1 and linuxdx but i didn't try them
in alfs kernel the max cpu clock is 787, i wanted to go to 806mhz.
coz ive been stable on 806mhz on STOCK kernel and now ive flashed alfs kernel but its limiting me at 787mhz -.-? help? or could i just load the module like i did with stock kernel? would it work?
my phone heated up like hell in just 15 min when i flashed 815Mhz...i used gc 8.4 then...stable at 710 Mhz....
ahhahaahhaah ..you noob : )
pls answer my question guys,
u're going off topic ==!
n1kolaa said:
ahhahaahhaah ..you noob : )
Click to expand...
Click to collapse
haha...the ics port was supergood...but im still a noob and thats a fact...so step by step learning and i learned about modules... today ive been playing with nexus rom ported to x8.....
and to the thread: by the way the alfs kernel was supergood for gdx...i havent used that rom...will xperiment this night with gdx...which rom are u using anyway???
im on gdx v20 with alfs v5.
its just that i cant seem to see the option to go above 787mhz.
is it ok to just load X8overclock by doixanh module in the rom as i already have alfs kernel that enables overclocking?
imrano1210 said:
im on gdx v20 with alfs v5.
its just that i cant seem to see the option to go above 787mhz.
is it ok to just load X8overclock by doixanh module in the rom as i already have alfs kernel that enables overclocking?
Click to expand...
Click to collapse
Flash miniCM and nAa kernel.best rom and kernel,and in overclock you can go upto 825 mhz.
Sent from my E15i using xda premium
Alfs kernel have OC module inside. No matter what rom you put on it max will be 787.
Also if you NOT delete oc/uv module from rom it will cause instability when OC.
806 Mhz .. with alfs kernel it imposibble.. why did u need higher freq, even if the 787 Mhz is pretty stable..
*Sorry for my bad english
hello I have ROM and kernel GignerDx Alfs, how can I turn up the processor to a value such as 700MHz? because I have a choice only between 600 and 729mhz. At 729 I restarts: (Please help
GingerDX doesn't support OC, so it depends only on kernel. Alfs allow You to choose from several frequencies. You should try SetCPU or similar app, but IMO it won't help.
Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.
AtanasP said:
Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.
Click to expand...
Click to collapse
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)
kalpetros said:
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)
Click to expand...
Click to collapse
I use semaphore with stock volt and 1.2 Ghz SmartassV2 - Noop and it work flawlesly
Ehndroix V + Neo Kernel // CyanAOSP + CyanCore
Using Neo Kernel, probably the best kernel i ever used so far.
It bases on Linaro 4.9, while the most other Kernels sit at 4.7 still.
For Antutu it keeps up at its highest preset: 1.32 GHz (Intelliactive) and I/O: BFQ (Stock). Getting impressive 6059 points.
For daily use i have it at 1.2 GHz, had no crash yet.
The kernel runs butter smooth with Ehndroix V.
The Best Kernel for Gaming is probably the CyanCore Kernel, if you use it with CyanAOSP (comes Stock with CyanCore Kernel) its the smoothest gaming experience so far i had on this device after the Legendary GamerzRom..