Related
I've been using a matte screen protector on my Galaxy Tab since I got it. Loved that it barely needed wiping..but hated the "rainbow" color effect it had on the screen, particularly on whites. Replaced it yesterday with a clear/gloss protector and i like it better, even though it attracts fingerprints like anything. I was just wondering, since the SGT has a gorilla glass screen, do we really need to use a screen protector for it?
Does anybody use their tab naked?
(i'm talking about the Tab here being naked, not you)
I just feel like I might be missing out on a better Galaxy Tab experience because I keep my tab in a thick case with a screen protector.
I tired it once. It feels smother actually, and considering the gorilla glass, a protector isn't really needed. However, there's probably the psychological impact of it. You know, glass is still glass.
I use the tab naked and naked ;-)
no screen protector but a case that protects realy nice.
http://www.amazon.de/Samsung-EF-C98...CLR8/ref=sr_1_4?ie=UTF8&qid=1306144564&sr=8-4
I am using the anti-glare screen guard.. it guards perfectly for my oily fingers hehe..
Sorry man, I don't think you will get a perfect answer. Some people's screens will have never scratched however some do get scratched although they are careful. Gorilla glass is not scratch proof, just more resistant to scratches than a normal non enhanced glass or plastic screen. There may be minerals in all sorts of places (cleaning cloth, pocket, car seat) which are harder than glass which could scratch your tabs screen.
The fact that you have been putting screen protectors in the first place and also have created this thread gives me the impression that you want a perfect screen. But there is always a trade off... no protection gives smoother and a greater touchscreen experience but a protector will prevent any possible scratches to your screen.
My advice would be for you to leave your screen protector on. Glossy is fine as fingerprints are not really visible when backlight is on.
I have used them for a while. I installed a XO Skin on my gtab and my 10.1 io. The best thing, (besides stopping scratches) is they hide finger prints and smudges. Heres a link
Screen protectors from xoskins
I used the code byublue for $3 off, paid for shipping..
olaf bosch said:
I use the tab naked and naked ;-)
Click to expand...
Click to collapse
Same here and I have absolutely no scratches on the screen. I do however keep my tab in a case whenever it isn't in use.
i guess there is no definite answer to this, as with a lot of things, it comes down to preference...
honestly now that i think about it, having a screen protector gives me the peace of mind that i did everything I could to protect the screen. I let other people use it, i stuff it in my bag with more confidence. If i take the screen protector off I might end up being an over-protective galaxy tab parent, always polishing the screen, always checking for scratches.
I think i'll be sticking with the glossy protector for a while.
ps. can anyone suggest the clearest possible screen protector i could get?
I used my Tab for 4 months naked without issue, then got a little paranoid before going on holiday.
The day after the Techskin arrived (and before I put it on) I drop the Tab on my driveway resulting in 2 tiny marks The marks aren't huge, but I can't help but notice them everytime I see the screen
*sigh*
I have used a screen protector on all my past tablets ( my GT is my 5th tablet ).
Using the protector allowed me to sell my previous tablets (when upgrading to the next one) with a 100% looking screen.
I use the GT without a screen protector (and with a case permanently on), as I intend to keep it for a while - and at the time I will maybe want to sell it, it will not be worth too much whether there are slight traces of use on the screen or not. It does look better and has better touch sensitivity with no screen protector on - no doubt about that.
But if I ever get a scratch on the glass - I can still put a screen protector on, which makes that scratch disappear.
My second current table (iPad) has a screen protector on, as my small kids often play on it . Also, the ipad has no case on it (only a back cover) - so the front is more exposed.
I use skinomi on my tab, incrediable, and ipod touch. They are almost like a vinyl. Very clear and I had very small bubbles when I installed it but the next day all of the imperfections disappeared. Like if you get a piece of dust under there during installation you don't get the air bubble with it. And they are cut to fit.
I was given a screen protector when I bought mine in the shop. They even applied it for me I think it the brand was screenguard.
I have a case for the tab, so i don't know how scratch resistant it is. As for the screen, it still looks great, but at extreme angles, there are coloured grains when viewing whites.
Its overall very good and is sized perfectly, I sometimes forget there's a screen protector!
I used my tab without screen protector. Screen protector is useless for a gorilla glass. I already tried scratching my tab using a key and scissor. No scratch at all. Try it guys.
Sent from my GT-P1000 using XDA App
I got the Invisible Shield protector from Zagg. They had a 50% off deal going for Memorial Day, so it came to like $13. From what I read, I might not need it. But I still bought it, just in case. Now all I'm waiting for is my Tab to arrive from Woot!
I use one of those cheapy anti-glare matte screen protectors. It makes reading things on the tab a bit easier on the eyes and prevents a lot of fingerprint smudging, however it also covers up the nice screen. So it just boils down to preference since the tab's screen is made of gorilla glass.
Screen Protector definitely. I love the gloss screen but fingerprints annoy me and glare can be bothersome. I got 3 for $4 bucks and only used one so I figure if a huge gouge gets in the screen protector the screen will be good and I have 2 extras.
I acquired my gsm galaxy tab last week, and I am extremely pleased with it. However I have been using it without a screen protector or a case. Unfortunately, I have managed to get abminornscrstch on the screen of my Tab. I was travelling with it in my pocket, but I never kept it with anything else, nevertheless I somehow managed to scratch it. So now I am on the lookout for a decent screen protector as I suspect my device's gorilla glass screen is probably not the strongest, all devices are not equal, there will always be some minor variation in quality in the hardware between devices, eg, CPU - some can be heavily undervolted AND overclocked and others freeze even if you attempt a minor overclock.
Sent from my GT-P1000 using XDA Premium App
It is not necessary to use a protector screen with gorilla glass!! Protect your Tab with a neoprene case!
Sent from my GT-P1000 using XDA App
I myself use that plastic film that came on my GTab when I bought it. You know, those cheap screen protectors that are added on at the factory before they get to the consumer. I just carefully peel the screen protector off, so as not to bend it, and then cut the little tab part off of it and rounded it out to fit the dimensions of the screen. Then I will spray water onto the tacky part that touches the screen and place it back on and the squeegee out the water to the edges. Works perfect every time, and it is removable and reusable. I do this will all of my phones too.
Matt screen protector all the way.
Sent from my GT-P1000 using Tapatalk
who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
jayochs said:
who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
Click to expand...
Click to collapse
I was thinking about picking up some myself. Which ones did you order?
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
I got these:
http://www.ebay.com/itm/161361388722?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Sent from my SM-T700 using Tapatalk
I always put screen protectors on all of my phones and tablets. I've just put one on my Tab S 8.4, had a few dusts under the protector. usually I would rip it out and try again, but I thought not today! Because fortunately the screen protector came with some stickers to help get rid of the dust.
Happy to say it is dust and bubble free now. Although it is not one of those fancy screen protectors, just a cheap one called elec shield.
invisible shield is the best.
will6316 said:
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
Click to expand...
Click to collapse
I ordered these from Amazon as well. Should be in today.
I'll give it a try and see if I like it. Probably gonna feel weird at first though.
I too would like to buy one. I asked ismooth on twitter but they are not gonna make one for the tab S (I have one for my note 3 and it's just perfect).
I think I'm gonna go Invisibleshield. It's not cheap but I've only heard good things about their products :good:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
jayochs said:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Mr shield
I have used many different screen protector products. I like spigen and I just installed the Mr shield ones. The are two finishes. Clear and matte. The matte finish cuts a lot of glare but impacts out door viewing. I now have the clear and love it. No bubbles. I have several videos on screen protectors that show tips on install . Herr is my initial install http://youtu.be/NHzarYjTtzE
kliu888 said:
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Click to expand...
Click to collapse
sweet! i'll give it a try when they come in
Putting on a screen protector reminds one of what a dirty filthy planet we live on. There is dust EVERYWHERE. One tried and true method is to run a hot shower in your bathroom for 10 minutes with the door closed until the room steams up. This pulls all of the airborne dust from the air. Turn the shower off, and use the tape hinge method to apply the protector.
Despite your best efforts you are likely to STILL get that ONE DAMNED PIECE OF DUST FROM HELL that manages to somehow get on the screen. If that happens, DO NOT TRY TO PEEL THE PROTECTOR UP FROM THE EDGE because if you bend it at all it will never seat again properly and you'll have a bubble that won't go away. Use tape to stick to the outside near the corner and gently lift that way, then use another piece of tape to grab the dust particle.
One negative of putting a screen protector on a tablet this size. Unless the protector is tempered glass, you are likely to feel a bit of drag as you swipe the screen - no plastic will ever feel as smooth as glass - and because the area is larger than your phone, you'll notice the resistance more. Also, unless the screen protector has an oleophobic coating, it will be harder to clean greasy fingerprints of it than from glass. Last point, most screen protectors are actually softer than glass so you are likely to get it pretty scratched up which, while saving your glass, leaves you with a scratched up viewing surface you have to look at. The alternative is to buy a screen protector with a hardness of 9 or above with an oleophobic coating but those tend to be a lot more expensive.
Get a pack of 3 or more if you can. You WILL screw it up a few times and you WILL want to replace them occasionally as they get scratched up pretty easily depending upon how anal you are about such things.
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
jayochs said:
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
I don't believe this tablet has Gorilla Glass, at least I don't believe the specs say so (could be wrong?). So yes, it could scratch easily. You can try and be careful but all takes is a tiny bit of grit on your finger, stylus or wiping cloth and you are done, Gorilla Glass or no.
Actually you know, skip the steamy bathroom. Just do it in a dry room but use a strip of masking tape and screen until every bit of dust is gone. Also remember, after you place the protector on the screen with the taped hinge, make sure you clean the screen again because it will get dust on it from the bottom of the protector.
Mr Shield makes very good inexpensive protectors.
http://www.amazon.com/gp/product/B00KATOH2S/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
perfect install on first one using the painters tape technique.
heres how
https://www.youtube.com/watch?v=PMPqDwVZzzM
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
will6316 said:
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
Click to expand...
Click to collapse
Be very careful with the tempered glass protector. NEVER left it up by the edges - use tape. They bend VERY easily and once bent will never lay down flat properly again. Every tempered glass protector I've ever used developed sealing problems along the edges, especially near the home button. YMMV but that is my experience.
There aren't good selection of screen protectors in the UK. Looked in Amazon, Ebay, Google, nothing with quality. So I only got the Elec shield.
I'd get tempered glass if I could, but as long as I screen is protected for now, then I'm happy enough.
I've had my Note 8 for 9 days now and while I was thinking about buying a screen protector when it arrived, I must admit that I'm quite impressed by the quality of the screen. It just feels so hard to scratch, so much so that one would probably struggle trying to scratch it even on purpose. I don't really see myself scratching it by accident anytime soon, although I must admit I'm this kind of guy who never drops the phone and handles it with extreme care.
I'm just curious to read what you guys think, maybe somebody persuades me to buy a screen protector after all, who knows.
The Gorilla Glass 5 is more shatter-resistant than previous versions and that means it is softer also. I had my Note 7 only a few days before it started picking up micro scratches on the front and back. Your mileage may vary. I'm putting on a Whitestone done and a skin on the back of mine.
I bought a screen protector but am debating putting it on. I may try it and see how it goes
Many of us do fine with no protection. Others report getting scratches no matter how hard they try not to.
I've always put a protector on my previous phones but I'm using my Note 8 without a screen protector. Like you, I'm always very careful with my phone and never drop it. The pocket that I put my phone in only contains my phone; I never put loose change or key in there. My Spigen Slim Armor case protects most of the phone and keeps the screen off the table surface if I do put it face down. With all of the issues people have had with curved tempered glass screen protectors, it just seems like more hassle than it's worth. The only one I'd get is the Whitestone Dome but that costs $60 here. Bit pricey.
I always run a protectors. Better safe then sorry.
I take very good care of my stuff. If a scratch did happen you cant take it back. So there would be no way ti fit it without buying a no front glass or new phone.
With a protector you can simply remove it and put on another one.
Fwiw, 5 days and i have a scratch, no clue where it came from. Have never used screen protectors, but will now
Sent from my SM-N950U using XDA-Developers Legacy app
It's def worth it. On my S8 there was a scratch after few days and I am very careful about my phone so really don't know how it happened.
Same here...it is so minor and you cannot even feel it. Babied it too. Also a small one on the back and it had a case day 1. Something tells me it came like that
Going naked for now. Just watch out for sand, fine sand , seems to be the only thing. If it was a flat screen I would have tempered glass on it.
Sent from my Galaxy Note8 using XDA Labs
ANY sharp instrument will scratch if the point is pressed in to the display, period. It is MUCH easier to bang on it with a long blade edge and look like you did nothing than the tip of an x-acto knife. That is what those demos do. Resisting attack across a large area is really what you are seeing. Keys are small like that etc...
Finally, a big part of Gorilla Glass is that it also HIDES or better put doesnt show minor damage as much as other glass. In other words, its there you just don't see it.
I bet a screen for this will be $300-$400. How much is a protector that looks good?
Better safe than sorry. Once it's scratched it would bug the hell out of me. It's a £1000 device.
Throw a screen protector on it. In time, micro-scratches will appear on your screen if you dont!
Note FE, had it on the ironing board (and forgot about it). Folded the ironing board and it very gently slid down it onto the floor face down....very gently....resulted in a 7mm scratch.
Not got one on this yet but it does highlight how pathetically weak GG5 is.
I put one on from iq shield...works great with my ringke wave
Since its a huge pain to find a glass protector that fits and doesn't screw up touch sensitivity I just grabbed the $8 Skinomi wet install protector, works great including with the edge display and S-Pen.
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
princeasi said:
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
Click to expand...
Click to collapse
But if it still looks like a scratch....
I personally really don't get the mentality of people who put huges cases and screen protectors on their phones. Most people here are obsessive on having 'the latest' and upgrade yearly when new stuff comes out so they can have the nicest, thinnest, prettiest shiny piece of hardware - Then they go wrap it all up in a thick rubber/plastic case and make it look sh*t. Why buy a device with no bezel if you're gonna put a huge thick case bezel around it!
I've had all my smartphones without cases/screen protectors as that's how they're meant to be and to honest I look after my devices. I usually get 2 year contracts on phones and at the end of 2 years, worst case, a few micro scratches on the screen - That's it. Do these guys bubble wrap their cars? It's a phone, it's designed to be used, it'll get the odd small scratch, just enjoy it for what it is IMO.
I have dropped my Pixel XL and the screen protector cracked but the screen was fine. Same on my Nexus 6. Dropped it on it's face from about 5' and the screen protector cracked all over it but the screen remained crack free. I fell that a glass screen protector takes the abuse of a drop. Granted, I've never dropped a phone with a screen protector so not sure if they would have cracked the screen without a protector but to me, It used to be relatively cheap protection. Some of the better protectors are 40+ now so it's not as easy a decision as it used to be for me.
So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.
Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....
Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL
YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.
Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.
To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.
I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.
twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.
Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Lol. There are like 10 screen protector threads here already !
Sent from my Galaxy Note8 using XDA Labs
Dejan Sathanas said:
Lol. There are like 10 screen protector threads here already !
Click to expand...
Click to collapse
But a lot of people are just looking for protection.... I am looking for more...
magichoward said:
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Click to expand...
Click to collapse
Feel your pain. I've done all what you have except for trying the glass ones.
Here is my experience. Get wet applied plastic one that is harder than the usual wet applied ones. A person on another thread recommend a Walmart Onn brand , I used it and it didn't leave S Pen marks at all. However, it was a ***** to fit correctly, so I being OCD I removed it and went back to the usual wet applied one again that does leave S Pen marks.
I believe Tech21 makes a screen protector similar in characteristics as the Walmart ONN one . Ain't tried that yet. But I can tell you that if the the Walmart ONN screen protector was applied correctly then I'd still be a fan.
Sent from my SM-N950U using Tapatalk
magichoward said:
But a lot of people are just looking for protection.... I am looking for more...
Click to expand...
Click to collapse
So your criteria would be: best protection available without fingerprints, reflections, or s-pen marks? Might be tough without compromising a bit on one of those aspects. I've tried 2 cheap glass ones that I took off immediately, the Spigen film protectors that leave s-pen marks, and the Whitestone Dome which which was best for me of the bunch (no s-pen marks of course, and no fingerprint issues so far. Haven't paid attention to reflection issues as of yet). The new Zagg glass looks promising too...ymmv
I like Skinomi. You get some s pen marks but they go away overnight. I use the spen alot too, it's my preferred way to interact with the screen.
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
corwin_amber said:
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
Click to expand...
Click to collapse
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
magichoward said:
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
Click to expand...
Click to collapse
Beach and sand indeed is an issue. I do not live on the beach but was there last summer (S8+, no pen, easier situation) and was so glad to have a film protector on it.
Bite the bullet and get a Whitestone dome?
If I may offer an alternative suggestion? I did not even want to risk the screen protector lottery on this phone, so I took a different approach.
I have used a case with a built-in screen protector. I feel it gives me the best of both worlds; ultimate protection from drops and screen damage when out and about, and in a couple of seconds (when at home and the soft safety of my sofa), it can be out of its case and back to a slippery naked unblemished masterpiece.
https://www.amazon.co.uk/i-Blason-Galaxy-Note-Protection-Reduction/dp/B074W3WBVC/ref=sr_1_1?ie=UTF8&qid=1516792422&sr=8-1&keywords=i-blason+note+8
Cons:
Minor reduction in finger sensitivity at the edges.
Adds significant bulk, especially in width making one-handed use impractical
Screen protector picks up scratches after a few months
Wearing polarised sunglasses makes screen hard to see (rainbow effect)
Be certain inside of screen cover is clear of grit before fitting
Pros:
Zero reduction in S Pen sensitivity.
Phone is tank-like. Has survived drops onto solid concrete no problem.
Screen protector can be popped out and used just as case if desired.
Dust caps for charging and headphone sockets
Easy to take off and have naked phone
It all balances out IMO. It might not be a perfect solution, but it is mine and I am happy with it.
I would advise against it, especially in a sandy environment. It WILL find a way in and then have a party with your screen. Also, in my personal opinion, this is way too bulky.
Personally, I am using a pitaka case. I am also having a thin, blank film on the back because ofscrarch protecting the back.
i'm using the official one for S8+ and it's very good, the s-pen does not leave any mark
I have used all types and found my favorite to be the tech21. No sensitivity issues, screen is clear, no spen marks, and decent with dealing with fingerprints. I couldn't use another after using this one.
Wouldn't it be just nice if Samsung offered a factory glass screen protector as an option when buying these devices. I'm sure they are aware of customers concerns - surely they have the technology to be able to do this, albeit probably not financially viable hence no go.
Sent from my SM-N950U using Tapatalk