Database Develop

screen protectors

who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..

jayochs said:
who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
Click to expand...
Click to collapse
I was thinking about picking up some myself. Which ones did you order?

Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.

I got these:
http://www.ebay.com/itm/161361388722?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Sent from my SM-T700 using Tapatalk

I always put screen protectors on all of my phones and tablets. I've just put one on my Tab S 8.4, had a few dusts under the protector. usually I would rip it out and try again, but I thought not today! Because fortunately the screen protector came with some stickers to help get rid of the dust.
Happy to say it is dust and bubble free now. Although it is not one of those fancy screen protectors, just a cheap one called elec shield.

invisible shield is the best.

will6316 said:
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
Click to expand...
Click to collapse
I ordered these from Amazon as well. Should be in today.
I'll give it a try and see if I like it. Probably gonna feel weird at first though.

I too would like to buy one. I asked ismooth on twitter but they are not gonna make one for the tab S (I have one for my note 3 and it's just perfect).
I think I'm gonna go Invisibleshield. It's not cheap but I've only heard good things about their products :good:

anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk

jayochs said:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.

Mr shield
I have used many different screen protector products. I like spigen and I just installed the Mr shield ones. The are two finishes. Clear and matte. The matte finish cuts a lot of glare but impacts out door viewing. I now have the clear and love it. No bubbles. I have several videos on screen protectors that show tips on install . Herr is my initial install http://youtu.be/NHzarYjTtzE

kliu888 said:
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Click to expand...
Click to collapse
sweet! i'll give it a try when they come in

Putting on a screen protector reminds one of what a dirty filthy planet we live on. There is dust EVERYWHERE. One tried and true method is to run a hot shower in your bathroom for 10 minutes with the door closed until the room steams up. This pulls all of the airborne dust from the air. Turn the shower off, and use the tape hinge method to apply the protector.
Despite your best efforts you are likely to STILL get that ONE DAMNED PIECE OF DUST FROM HELL that manages to somehow get on the screen. If that happens, DO NOT TRY TO PEEL THE PROTECTOR UP FROM THE EDGE because if you bend it at all it will never seat again properly and you'll have a bubble that won't go away. Use tape to stick to the outside near the corner and gently lift that way, then use another piece of tape to grab the dust particle.
One negative of putting a screen protector on a tablet this size. Unless the protector is tempered glass, you are likely to feel a bit of drag as you swipe the screen - no plastic will ever feel as smooth as glass - and because the area is larger than your phone, you'll notice the resistance more. Also, unless the screen protector has an oleophobic coating, it will be harder to clean greasy fingerprints of it than from glass. Last point, most screen protectors are actually softer than glass so you are likely to get it pretty scratched up which, while saving your glass, leaves you with a scratched up viewing surface you have to look at. The alternative is to buy a screen protector with a hardness of 9 or above with an oleophobic coating but those tend to be a lot more expensive.
Get a pack of 3 or more if you can. You WILL screw it up a few times and you WILL want to replace them occasionally as they get scratched up pretty easily depending upon how anal you are about such things.

good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk

jayochs said:
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
I don't believe this tablet has Gorilla Glass, at least I don't believe the specs say so (could be wrong?). So yes, it could scratch easily. You can try and be careful but all takes is a tiny bit of grit on your finger, stylus or wiping cloth and you are done, Gorilla Glass or no.

Actually you know, skip the steamy bathroom. Just do it in a dry room but use a strip of masking tape and screen until every bit of dust is gone. Also remember, after you place the protector on the screen with the taped hinge, make sure you clean the screen again because it will get dust on it from the bottom of the protector.
Mr Shield makes very good inexpensive protectors.

http://www.amazon.com/gp/product/B00KATOH2S/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
perfect install on first one using the painters tape technique.
heres how
https://www.youtube.com/watch?v=PMPqDwVZzzM

Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.

will6316 said:
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
Click to expand...
Click to collapse
Be very careful with the tempered glass protector. NEVER left it up by the edges - use tape. They bend VERY easily and once bent will never lay down flat properly again. Every tempered glass protector I've ever used developed sealing problems along the edges, especially near the home button. YMMV but that is my experience.

There aren't good selection of screen protectors in the UK. Looked in Amazon, Ebay, Google, nothing with quality. So I only got the Elec shield.
I'd get tempered glass if I could, but as long as I screen is protected for now, then I'm happy enough.

Dazzling white vs Titanium Bronze

hello folks!
So I'm about to receive the titanium bronze Samsung galaxy tab s 8.4 and will have 14 days to make an exchange. I went to the store the other day and had a comparison with the texture of Titanium bronze vs dazzling white. So I made a little scratch test with my finger nails on the demos and the white can barely see any scratches being made while the bronze can definitely see scratch marks made. Despite this I was wondering what other pros/cons for these back covers have? I'm most likely am going to have a skin protection for the front/back of the tablet because I want to protect any scratch marks and finger prints in case. Does anyone know of any good skin protection out there? Is ZAGG any good? I'm also looking for book cases that can make the tablet stand at a 45 degree, cover the front and back for extra protection. I welcome all feedbacks and recommendations

I recommend the tempered glass screen protectors. I have one on mine. Just like the original screen.

I'm not able to scratch my back, what you using keys?
Tbh i think its pointless buying a nice tablet like this if all youre gonna do is completely cover it up and put another glass screen/protector in front of it. Making it look crap and spoiling the experience until you sell . Samsung could have done that themselves, but who would have bought it then?
Phones and covers yes, screen protectors no. In my experience screens dont get scratched/damaged unless you really abuse the device.
I have the Samsung simple cover and it compliments the tab s perfectly. Dont wanna hide that nice back.

ashyx said:
I'm not able to scratch my back, what you using keys?
Tbh i think its pointless buying a nice tablet like this if all youre gonna do is completely cover it up and put another glass screen/protector in front of it. Making it look crap and spoiling the experience until you sell . Samsung could have done that themselves, but who would have bought it then?
Phones and covers yes, screen protectors no. In my experience screens dont get scratched/damaged unless you really abuse the device.
I have the Samsung simple cover and it compliments the tab s perfectly. Dont wanna hide that nice back.
Click to expand...
Click to collapse
I was able to make scratch marks that were apparent in the bronze and the scratches were easily visible if you were to take a real close look at it. If my nails can make a scratch mark out of it, i'd best be putting a screen protector on the back too : )

sweetandsoursauce said:
I was able to make scratch marks that were apparent in the bronze and the scratches were easily visible if you were to take a real close look at it. If my nails can make a scratch mark out of it, i'd best be putting a screen protector on the back too : )
Click to expand...
Click to collapse
Must have sharper nails than me then, just tried again and nothing!
EDIT: ok just managed to make a tiny mark, but i had to dig hard!

ashyx said:
Must have sharper nails than me then, just tried again and nothing!
EDIT: ok just managed to make a tiny mark, but i had to dig hard!
Click to expand...
Click to collapse
hahaa yup, and what case do you have for yours? OEM? and are you using a stylus by any chance?

I use the genuine samsung simple cover, but i have seen a book cover which is remarkably like the samsung one for way less.
http://www.ebay.co.uk/itm/390957224...l?_from=R40&_sacat=0&_nkw=390957224638&_rdc=1
http://www.amazon.co.uk/gp/aw/d/B00...book+cover&dpPl=1&dpID=51hRmzMZ+VL&ref=plSrch

ashyx said:
I'm not able to scratch my back, what you using keys?
Tbh i think its pointless buying a nice tablet like this if all youre gonna do is completely cover it up and put another glass screen/protector in front of it. Making it look crap and spoiling the experience until you sell . Samsung could have done that themselves, but who would have bought it then?
Phones and covers yes, screen protectors no. In my experience screens dont get scratched/damaged unless you really abuse the device.
I have the Samsung simple cover and it compliments the tab s perfectly. Dont wanna hide that nice back.
Click to expand...
Click to collapse
I beg to differ about using glass screen will make it look crap, im using a brando rounded edges tempered glass and it adds to the beauty, now it looks like a giant note for with glass screen tapered smoothly through the side. And i forgot it's even there. It would be easy/cheaper to replace a tempered glass rather than the whole digitizer when you got it scratched.
Also using a smart cover free from sammy when i bought minde. Serves its purpose.
On aother note, be carefull on thr faux metallic bronze side. It's so soft that a little bump with an edged object will leave its mark.

ThE_SoUrCe said:
I beg to differ about using glass screen will make it look crap, im using a brando rounded edges tempered glass and it adds to the beauty, now it looks like a giant note for with glass screen tapered smoothly through the side. And i forgot it's even there. It would be easy/cheaper to replace a tempered glass rather than the whole digitizer when you got it scratched.
Also using a smart cover free from sammy when i bought minde. Serves its purpose.
On aother note, be carefull on thr faux metallic bronze side. It's so soft that a little bump with an edged object will leave its mark.
Click to expand...
Click to collapse
Thank god I thought I was the only person going crazy here because I definitely felt as if the titanium bronze's back cover was easy to make a mark on it(be it from scratch, smudge, etc). But I'm one of those fanatics where I need to first get a protector on the tablet before I even begin to use it haha. I've been seeing a lot of 'tempered glass screen protectors' than before, is it the best type of protector out there atm? Is it like in between glass and plastic? I've also had plastic screen protector or skin protector as some would call it, on my phone and have had no issues, no corner peels or as much finger prints to none, clear and see through but I do want to keep up to date of the current protection of phones/tablets. What are some benefits of the tempered glass protector have? All I really care about really are the smudges like finger prints, corner peels, no dust, no bubbles, scratch resistant of course and most importantly clear/see through.

sweetandsoursauce said:
Thank god I thought I was the only person going crazy here because I definitely felt as if the titanium bronze's back cover was easy to make a mark on it(be it from scratch, smudge, etc). But I'm one of those fanatics where I need to first get a protector on the tablet before I even begin to use it haha. I've been seeing a lot of 'tempered glass screen protectors' than before, is it the best type of protector out there atm? Is it like in between glass and plastic? I've also had plastic screen protector or skin protector as some would call it, on my phone and have had no issues, no corner peels or as much finger prints to none, clear and see through but I do want to keep up to date of the current protection of phones/tablets. What are some benefits of the tempered glass protector have? All I really care about really are the smudges like finger prints, corner peels, no dust, no bubbles, scratch resistant of course and most importantly clear/see through.
Click to expand...
Click to collapse
I am the same way. I always have a screen protector ready for when I get a new phone or tablet. I like to keep my electronics in good shape. Have switched to the tempered screen protectors a while back and can definitely say it is well worth it. I use to alway buy square trade warranty for my phones but have stopped since using the tempered screen protectors. The screen is really the most valuable piece to protect. I can attest that the tempered glass really works. Both of my daughters have dropped their phones and the tempered screen protector shattered but the screen on the phone did not. Thus well worth the investment. A normal screen protector would have done nothing to absorb the impact. Anyway, I highly recommend them. Also, check reviews and different brands on Amazon. You don't have to spend an arm an a leg on these. I paid $8 for iCarez for my G3 and girls iPhones. Just as good as Zagg which people pay $40 - 50 dollars for. As far as the Galaxy tab S, I also added one due to the size of the tablet. I am not using a case since I have the matching keyboard. I have not had a tablet this large before so was definitely concerned about dropping it. Picked up the Skinomi tempered glass. A bit more at $23 but quite a bit larger screen as well.

cbb77 said:
I am the same way. I always have a screen protector ready for when I get a new phone or tablet. I like to keep my electronics in good shape. Have switched to the tempered screen protectors a while back and can definitely say it is well worth it. I use to alway buy square trade warranty for my phones but have stopped since using the tempered screen protectors. The screen is really the most valuable piece to protect. I can attest that the tempered glass really works. Both of my daughters have dropped their phones and the tempered screen protector shattered but the screen on the phone did not. Thus well worth the investment. A normal screen protector would have done nothing to absorb the impact. Anyway, I highly recommend them. Also, check reviews and different brands on Amazon. You don't have to spend an arm an a leg on these. I paid $8 for iCarez for my G3 and girls iPhones. Just as good as Zagg which people pay $40 - 50 dollars for. As far as the Galaxy tab S, I also added one due to the size of the tablet. I am not using a case since I have the matching keyboard. I have not had a tablet this large before so was definitely concerned about dropping it. Picked up the Skinomi tempered glass. A bit more at $23 but quite a bit larger screen as well.
Click to expand...
Click to collapse
Yeah, I was thinking of getting a tempered glass protector from Skinomi because of their life time replacement warranty : )
I made another thread discussing about the skin protections of Skinomi for the back covers.
http://forum.xda-developers.com/gal.../skinomi-skin-protector-carbon-fiber-t3019907
Carbon fiber, Wood and Brushed... but unfortunately no reviews anywhere

sweetandsoursauce said:
Yeah, I was thinking of getting a tempered glass protector from Skinomi because of their life time replacement warranty : )
I made another thread discussing about the skin protections of Skinomi for the back covers.
http://forum.xda-developers.com/gal.../skinomi-skin-protector-carbon-fiber-t3019907
Carbon fiber, Wood and Brushed... but unfortunately no reviews anywhere
Click to expand...
Click to collapse
I also picked up their clear back skin. Just got so can't comment on it yet. Again, this is the clear back. As mentioned, I have the matching keyboard so I am using this without a case on. I wanted to make sure the back at least had something on to prevent from potential scratches and dings. Not as good as standard case, but better than nothing at all.

cbb77 said:
I also picked up their clear back skin. Just got so can't comment on it yet. Again, this is the clear back. As mentioned, I have the matching keyboard so I am using this without a case on. I wanted to make sure the back at least had something on to prevent from potential scratches and dings. Not as good as standard case, but better than nothing at all.
Click to expand...
Click to collapse
Clear skin would be a good idea but I don't know if it has grid-like pattern that allows air bubbles to escape just like the wood/brushed/carbon skins have. But yeah, I guess i'll be the guinea pig to test it out, still debating carbon fiber/brushed. I'll write a review and show pics of it when I order it and have everything set up ready

Didn't know there are hardware differences between the two. I got myself a white Tab S because that's what was on sale at the moment. I'd buy it in any color other than pink.

[REVIEW] Skinomi Tech Glass™ Samsung Galaxy S6 Edge Full Coverage Screen Protector

I know most of us (if not all) keep looking for that perfect tempered glass screen protector for our phones (not to mention that it has to be curved of course).
Today I received my Skinomi Samsung Galaxy S6 Edge tempered glass screen protector, and I'd be more than happy in sharing my review of the product.
Packaging:
Packaging is retail. I pre-ordered from their website directly (rather not deal with Amazon), and I got a cool coupon that saved me 25% .
What comes included is your screen protector, fiber cloth, alcohol cleaning cloth and dust lifter screen.
Installation:
I'm going to be completely honest here; This is my first time installing a tempered glass screen protector. Much less a dry installation. I've always used invisible shield for my previous devices so I was expecting a hassle. This was by far the easiest installation I've ever done. Super easy!
Fit:
The fit is not as great as I'd expect it to be. It doesn't cover the phone fully on the edges, you can still see some small space that's left uncovered (I've attached pictures for your leisure). I'm sure that I've installed it as best as humanely possible (actually quite proud of that haha).
The capacitive buttons on the bottom or probably my main issue; The cover completely warps them. The cutouts on the glass protector don't match the cutouts on the phone itself. This causes the buttons to look weird and warped when they light up. I personally don't care (now if this is a mistake and someone from Skinomi is reading this, then please reach out!), the case does what it's supposed to do, but I feel that it makes the fact you have a glass protector on your phone obvious.
Feel:
The protector feels great, you really can't tell there's something on top of your screen. Touch sensibility is weird around the middle towards the left edge on my particular protector (I do have to press slightly harder in order to get a response), but I'm having that after 24 hours that problem clears out.
Final thoughts:
I actually like the protector overall. It's not bad for the price I payed (although I was expecting a better fit for the buttons and a better fit around the screen itself). I'm guessing that as long as the screen protector doesn't come off like the Spigen one I would consider myself happy.
I know the pictures are not the greatest, but If you guys want better ones or different angles or something just let me know!
Hope this helps!

Are those glittery specks permanent?

Graffiti Exploit said:
Are those glittery specks permanent?
Click to expand...
Click to collapse
Yes they are.

I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk

Mikeonic said:
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Click to expand...
Click to collapse
Exactly my thoughts. If the edges were more sensitive, I wouldn't care about the rest.

I'm very impressed with this tempered glass. SGP use to be my favorite for all my devices but I'll start considering Skinomi tempered glass going forward.
There are some sensitivity issues on the left side but hopefully that will go away once the glass settles in and will report back if it does or doesn't go away later in the week. What I mean is that I would have to press harder than normal.
Here is a pic with the glass before installation. I just realized I still had the clear plastic covering my lens after I took this picture and will add a few more pictures with it being installed once I borrow a colleagues camera phone.
It looks so beautiful once installed and no bubbles like the SGP curved one. TBH, hyped went away once I started to get sensitivity issues on the left hand side and hopefully it will go away after a few days.
EDIT: after re-aligning the glass, I don't have any sensitivity issues anymore. You might have to re-aligning it a few times if you're off. Don't worry, you won't lose any stickyness. This tempered glass is worth buying IMHO.

Best screen protector? . And don't recommend whitestone dome (i will explain why)

So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.

I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.

Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.

Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk

DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.

Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.

Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial

Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer

xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?

I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...

Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.

KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.

Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....

Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL

YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.

Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.

To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.

I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.

twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.

Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.

Question S21 Ultra tempered glass screen protector

Tried to search for a thread talking about tempered glass screen protectors for S21 ultra and had no luck. Anybody have good recommendations for a decent one that's priced well?

I bought this screen protector from Amazon. It fits great: https://smile.amazon.com/gp/product/B08RYXF8F6/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

I know it's definitely worth it for the phone but anything a little cheaper. $40 is completely reasonable for two especially because it's a $1200 phone

Get a good case with raised guards around the screen and good corner protection.
That should be your primary screen protection.
That plus a wet apply urethane screen protector works fine.
Glass does not compress and is subject to the laws of hydraulics. It can behave in strange and seemingly unpredictable ways to stress.

anish88 said:
I know it's definitely worth it for the phone but anything a little cheaper. $40 is completely reasonable for two especially because it's a $1200 phone
Click to expand...
Click to collapse
Spigen has one for 30

blackhawk said:
Get a good case with raised guards around the screen and good corner protection.
That should be your primary screen protection.
That plus a wet apply urethane screen protector works fine.
Glass does not compress and is subject to the laws of hydraulics. It can behave in strange and seemingly unpredictable ways to stress.
Click to expand...
Click to collapse
Definitely agree with that! Does the camera need protection as well?

anish88 said:
Definitely agree with that! Does the camera need protection as well?
Click to expand...
Click to collapse
A raised case guard around the module and just keep your fingers off it.
The outside glass is the factory lense guard; it's replaceable. I operated my 10+ like this for almost a year and a half. I clean it with a dry microfiber cloth as needed. It's made of plastic. No scratches on it whatsoever... and I like in a dusty desert town.

blackhawk said:
A raised case guard around the module and just keep your fingers off it.
The outside glass is the factory lense guard; it's replaceable. I operated my 10+ like this for almost a year and a half. I clean it with a dry microfiber cloth as needed. It's made of plastic. No scratches on it whatsoever... and I like in a dusty desert town.
Click to expand...
Click to collapse
It's replaceable? Is that easy? I have a raised case but im coming from an s9+ and didn't protect that which was fine. I just want to protect it as well as I can.

Also I found a deal for the amfilm protector if you guys want.
Galaxy S21 Ultra
(2 Pack) amFilm Tempered Glass Screen Protector for Galaxy S21 Ultra [amazon.com] 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner, UV Gel Application
20% off Coupon Code to make final price $19.99 use code: Q3HIKIHR
Plus this 30% OFF Universal Claim code (For Galaxy S21 products): MLIX9RW8
Brought it to 19.99

anish88 said:
It's replaceable? Is that easy? I have a raised case but im coming from an s9+ and didn't protect that which was fine. I just want to protect it as well as I can.
Click to expand...
Click to collapse
Not sure how it's mounted on that phone. The 10+'s looks like it uses a adhesive strip and pops out. Might need to replace the back panel though.
You'll probably need to replace the battery long before the lense guard.
Not sure why people focus on this as with a good case it's well protected and relatively easy to replace. The display and frame are not...

Phone fell out of my pants pocket in the car. Hit the seat and the metal guard underneath the seat. Glass scratched on screen already....needless to say that just about anything will scratch the glass that is metal

Chavist1 said:
Glass scratched on screen already....needless to say that just about anything will scratch the glass that is metal
Click to expand...
Click to collapse
Can you elaborate - what was the situation with your screen?
1) did you scratch the pre-installed protector the phone shipped with, and the glass screen underneath is still fine?
2) did you scratch the naked gorilla glass screen because you had peeled off the pre-installed protector?
3) did you install your own glass protector, and that's what scratched here?
4) other situation?

Samsung pre-installs a plastic film screen protector for you, so dont flip out about small scratches on the display.

WHITESTONE DOME , always Whitestone Dome. I spend >1300 on a phone, you're G**damn right I'm gonna drop 75-90 on my glass cover.
The new one is almost totally automated. These guys are incredible. When I've dropped my phones in the past, the WSDome cracks, but never my phone screen. Just sayin.

white stone is now 45.99 on amazon along with a camera cover package... for those curious enough to try... like me... I feel like it works for 50% of the people and the rest of us will be sad after we put it on... I hope you 50% are not lying.. special place in hell for you if you are.... I've been using a tpu type film.. although its ok for finger prints.. it feels different than glass and smudges are harder to clean. and every time it there's an angle you see all kinds of marks on it... so annoying... I guess I can't handle it any longer and am willing to bite the bullet.... wish me luck....

johnp357 said:
white stone is now 45.99 on amazon along with a camera cover package... for those curious enough to try... like me... I feel like it works for 50% of the people and the rest of us will be sad after we put it on... I hope you 50% are not lying.. special place in hell for you if you are.... I've been using a tpu type film.. although its ok for finger prints.. it feels different than glass and smudges are harder to clean. and every time it there's an angle you see all kinds of marks on it... so annoying... I guess I can't handle it any longer and am willing to bite the bullet.... wish me luck....
Click to expand...
Click to collapse
I have the amFilm version of this and it's definitely the way to go.
That's a decent deal and I suggest to buy it and try it. Hold onto the installation kit and light that comes with it. After you go through the 2 included glass screens, you can buy new LOCA glue screens on ebay for cheap and use the installation kit and light from the Whitestone.

How's the fingerprint detection? Even the expensive Whitestone has people complaining about fingerprint detection...and for the money that's crazy. It should work 90% of the time for the money they want. I may try the amfilm

AMFILM codes don't work anymore

HLyons said:
How's the fingerprint detection? Even the expensive Whitestone has people complaining about fingerprint detection...and for the money that's crazy. It should work 90% of the time for the money they want. I may try the amfilm
Click to expand...
Click to collapse
I'm happy with fingerprint detection for the most part. It's a tough time of year weather-wise. When hands are dry, its harder to read, and thats true for any fingerprint scanner. Instead of registering 4 different fingers, I register each thumb in 2 spots which increases my detection rate. When fingers are not as dry, detection is extremely quick, like having no screen protector. I imagine the amFilm and Whitestone are pretty identical as far as the glass and LOCA glue. The installation kits look a little bit different. Whitestone dome has been around for a while and i think this type of protector is newer for amFilm. I've been using the regular amFilm tempered glass on many other phones and have been happy with them. And their customer service is top notch.

I was not going to bother with a glass protector due to the warnings about the fingerprint scanner but someone sent me a link to an install video that mentions the FP scanner. They recommend hard pressing the area for 15-30 seconds before curing with UV light. Afterwards, he demonstrates FP scanner working really well. I've ordered the screen protector after watching that.
Link to the part of video when he tests it.