Related
error when flashing hero > e:can't chown/mod /system/xbin (so such file or directory)
e:can't chown/mod /system/xbin (so such file or directory)
e:failure at line 80
All Hero roms give me this when I try to flash them, the 'line 80' sometimes changed though.
Any ideas? i really need me a hero.. lol thanks
Do you have Kaykuro's SPL AKA Danger 2005?
It is required for Hero ROMs...
AdrianK said:
Do you have Kaykuro's SPL AKA Danger 2005?
It is required for Hero ROMs...
Click to expand...
Click to collapse
yep.. reflashed it just incase.. have newest radio too. :/
APEX.7 said:
yep.. reflashed it just incase.. have newest radio too. :/
Click to expand...
Click to collapse
When you flashed the SPL did you physically press alt-s and home + back to reboot? (and not use the trackball)
Just trying to make sure it actually flashed. Could you also check by boot in to SPL (Home and camera ) and tell us what version it is?
AdrianK said:
When you flashed the SPL did you physically press alt-s and home + back to reboot? (and not use the trackball)
Just trying to make sure it actually flashed. Could you also check by boot in to SPL (Home and camera ) and tell us what version it is?
Click to expand...
Click to collapse
honesly can remember what buttons i pressed when flashing..
booted into spl got...
dre110 pvt 32b
hspl10.95.3000
cpld-4
Radio-2.22.19.26i
oct 20 2008
seria 10
...thank you so much for your help btw
APEX.7 said:
honesly can remember what buttons i pressed when flashing..
booted into spl got...
dre110 pvt 32b
hspl10.95.3000
cpld-4
Radio-2.22.19.26i
oct 20 2008
seria 10
...thank you so much for your help btw
Click to expand...
Click to collapse
No problem man
Okay, you're still on hardSPL XD
Basically when you flash the radio or SPL on Cyan's recovery, you must physically press the buttons to flash. Using the trackball will mean that when you reboot it will revert to how it was. You do have the correct radio, but not SPL.
So, grab the SPL and name it update.zip (as when cant flash any zip because that requires the trackball), alt-w to wipe, alt-s to flash, home+back to reboot. Don't touch the trackball at all.
when you boot up there will be no ROM, SPL flash formats your nand. So, after SPL flah leave your phone for a couple of minutes to be safe, then boot in to recovery and go to console. Type "ums_enable" to mount your sd in your computer so you can copy a ROM over. The "ums_disbale" when you're done and then "reboot recovery". Now wipee and flash, you can use the track ball for that too
AdrianK said:
No problem man
Okay, you're still on hardSPL XD
Basically when you flash the radio or SPL on Cyan's recovery, you must physically press the buttons to flash. Using the trackball will mean that when you reboot it will revert to how it was. You do have the correct radio, but not SPL.
So, grab the SPL and name it update.zip (as when cant flash any zip because that requires the trackball), alt-w to wipe, alt-s to flash, home+back to reboot. Don't touch the trackball at all.
Click to expand...
Click to collapse
you are my hero .. thank you very much for your time. yay i can finally get some hero.
APEX.7 said:
you are my hero .. thank you very much for your time. yay i can finally get some hero.
Click to expand...
Click to collapse
No problem, it's the summer holidays so I have frick-all to do ;-) lol
Ah, crud. Just installed spl-signed.zip and now my rooted dream refuses to boot past the HTC dream splash screen. Followed the instructions and cant even enter bootloader or recovery mode. WTF?? Any ideas??
hiroprotagonist said:
Ah, crud. Just installed spl-signed.zip and now my rooted dream refuses to boot past the HTC dream splash screen. Followed the instructions and cant even enter bootloader or recovery mode. WTF?? Any ideas??
Click to expand...
Click to collapse
Sounds like you might have a bricked device if you didnt install the 26I radio before when you first rooted.
Crud, crud crud crud! This is my gf's mom's dream... Was running a custom rom, cant remember which one it is... Now i am absolutely in the dog house. Any ideas on what i can do? Its not totally, bricked, is it?? Is there any such thing as a goldcard for the dream? Need help asap.
Nothing you can do, should have read the instructions.
Yes there is a goldcard for the dream, but it won't help you if the phone won't boot.
Is this a semi-brick or a full, unrecoverable brick? It does get to the htc dream splash screen, then stays there
hiroprotagonist said:
Is this a semi-brick or a full, unrecoverable brick? It does get to the htc dream splash screen, then stays there
Click to expand...
Click to collapse
Full brick, there really isnt a partial brick. Brick is completely unusable (no recovery, bootloader, or os), a semi-brick as you call it would be just no rom or no rom and recovery- but full access to bootloader
Well, cldnt sleep all last night. Been looking at posts trying to find a fix. JTAG, anyone?
hiroprotagonist said:
Well, cldnt sleep all last night. Been looking at posts trying to find a fix. JTAG, anyone?
Click to expand...
Click to collapse
No JTAG method, you'd need to open the phone and replace the motherboard.
Ok i just rooted my phone, but now how do I download the rom I want. I want to download this rom: [ROM] KiNgxKxlicK AOSP 2.1 [v1.4] but there are no instructions or anything. What is with all this talk about "swap" "wiping" the latest "radios" and how do I do that? Bare with me, Im completely new to this =).
also, do I need to download a modified image? if so where can I find one .....
would take the time to help you but im presssed for time, im sure someone will help you. i will give you one piece of information though,
use the SEARCH button for all your questions.
First off do you know what Recovery Image you have?
I have Amon Ra's if that means anything. Thanks for helping me, this has been taking me all day... Im so lost!
bijanian said:
I have Amon Ra's if that means anything. Thanks for helping me, this has been taking me all day... Im so lost!
Click to expand...
Click to collapse
What Phone do you have?
Ok so do this:
Turn off your Phone
Once its off Press and Hold The End Call Button and the camera button at the same time and once its done loading up tell me what you see.
If a White screen comes up and at the top left it says:
Code:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA!0000)
CPLD-4
RADIO-2.22.19.26I
Then this will be much easier.
I have a g1/dream
it says:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
bijanian said:
I have a g1/dream
it says:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Click to expand...
Click to collapse
if you want to run kingklicks aosp 1.4 or any eclair/ hero you are going to need to flash death, haykuro, danger spl or what ever they call it these days
Ok so yeah flash the Haykuro SPL and afterwards you'll be able to flash any ROM you like =)
haykuro spl will let you flash hero/ eclair roms
long story short haykuro spl will leave you with more internal memory, and bleh blah bleh
make sure you flash the latest radio before flashing the the spl. or you will brick your phone.
thanks you guys!!! one last question though, how do i flash the latest radio and the spl. where can i find them. sorry im such a noob =P
b0ricuaguerrero said:
haykuro spl will let you flash hero/ eclair roms
long story short haykuro spl will leave you with more internal memory, and bleh blah bleh
make sure you flash the latest radio before flashing the the spl. or you will brick your phone.
Click to expand...
Click to collapse
he already has the latest radio.
once I flash the danger spl (if i could find it and figure out how to), do i download the rom i want and change its name to update.zip, puts it in my sdcard, turn off my phone, hold hold home and end, then ...... Whatd do i do next?
bijanian said:
once I flash the danger spl (if i could find it and figure out how to), do i download the rom i want and change its name to update.zip, puts it in my sdcard, turn off my phone, hold hold home and end, then ...... Whatd do i do next?
Click to expand...
Click to collapse
**Not responsible if this messes up your phone in anyway.**
**Just follow instructions and you wont have a heart attack**
This is to flash the SPL:
http://code.google.com/p/sapphire-port-dream/ = Latest SPL
Dont worry about the OTA radio thing. Just get the SPL.
1.Put the SPL into the root of your sdcard and rename it update.zip (if you dont have latest recovery image)
1.Reboot into recovery (Turn off Phone. then press and hold both Home and End Call buttons.)
2.Go to where it says Flash zip from sdcard and click on it.
3.choose the update.zip which is the SPL and flash it.
4.let it install and DO NOT TOUCH IT OR DO ANYTHING TO YOUR PHONE AT ALL WHILE ITS BEING FLASHED. I CANNOT STRESS THIS ENOUGH.
5.When its done reboot your phone.
6.If you go to the G1 boot screen and it stays like that dont worry just take the battery out of your phone and put it back in. then reboot to recovery mode again.
7.The reason it stays in the G1 boot screen is because you need to flash a new ROM otherwise your phone wont work like normal.
Instructions for Flashing a rom:
**After Danger SPL has been Flashed**
1.Reboot your phone into recovery.
2.Wipe everything. Just in case. *make a backup first*
3.Find ROM you want.
4.Rename to update.zip (If you have Amon_RA's v1.5.2 Recovery Image then you dont need to rename.
5.Put the ROM on the root of your sdcard. (To mount the phone through the recovery just plug in the phone then click on where it says "USB-MS Toggle")
6.Unmount the Phone from the computer (Press Home to disable USB-MS Toggle to safely remove phone) and un plug it.
7.Go to where it says Flash Zip from sdcard and click on it.
8.You should see the rom which is a zip file.
9.Click on it and when it asks you if thats the rom that you wish to flash just press the home button.
10.Let it install and once its done it will say
"Install from sdcard complete: Please Reboot"
11.Click on the reboot system now option or hold down home and the end call buttons at the same time.
12. And voila you have the new ROM installed.
Remember if you are going to be switching from ROM to ROM then make sure to:
Do a Factory Reset Wipe
Do a EXT Wipe
Do a Dalvik-Cache Wipe.
I hope this helps dude.
OMG! I love you man. Thank you. I was afraid I bricked my phone because it it was stuck on g1 screen but i did what u said and loaded the rom and it worked. thank you!
bijanian said:
OMG! I love you man. Thank you. I was afraid I bricked my phone because it it was stuck on g1 screen but i did what u said and loaded the rom and it worked. thank you!
Click to expand...
Click to collapse
No problem man Im glad to help
Hello! Guys, i have a little problem with me G1. I installed the RAs recovery, then through this recovery i tried to install SPL. This process finished with success, and recovery asked for pressing HOME+BACK button to reboot. After reboot my device was stoped on T-Mobile G1 splash screen. After 30 mins i disconnected the battery and put is back. Now my device is showing splash screen. PWRON+Camera is not working, Back+pwron is not working too. Please help! What can i do with my device now. thanks in advance. and sorry for my bad english!
Cyrix995 said:
Hello! Guys, i have a little problem with me G1. I installed the RAs recovery, then through this recovery i tried to install SPL. This process finished with success, and recovery asked for pressing HOME+BACK button to reboot. After reboot my device was stoped on T-Mobile G1 splash screen. After 30 mins i disconnected the battery and put is back. Now my device is showing splash screen. PWRON+Camera is not working, Back+pwron is not working too. Please help! What can i do with my device now. thanks in advance. and sorry for my bad english!
Click to expand...
Click to collapse
What radio did you have on your G1? What SPL did you flash? If you flashed DangerSPL with an 1.x radio, then you should have read a bit more in this forum, because you bricked your phone ....
Sent from my Htcclay's Superfly G1 using XDA App
ota-radio-2_22_19_26I
SPL: 1.33.2005
Cyrix995 said:
ota-radio-2_22_19_26I
SPL: 1.33.2005
Click to expand...
Click to collapse
The radio should be ok for flashing DangerSPL, even if it DangerSPL (1.33.2005) is never needed!
Did you flash the radio and the SPL without rebooting first?
In the WiKi you can find more information.
After radio flashing i did reboot, and after SPL flashing i tried to reboot, but device stopped on the splash screen! I think that i was killed the boot((((
Cyrix995 said:
After radio flashing i did reboot, and after SPL flashing i tried to reboot, but device stopped on the splash screen! I think that i was killed the boot((((
Click to expand...
Click to collapse
Did you check, that the new radio was really intalled? I suppose something went wrong and you were still on the 1.x radio. Then you flashed the DangerSPL, which is incompatible with that radio version ... Sorry, but there is only the possibility to find someone who knows to JTAG your phone.
i can jtag my phone, the shematix of jtag dongle is very simple and i can find parts for it in my country. Only one thing: i do not know where i can find bootloader for dream!
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_HTC_Dream
im not sure what your specifications are but if its a HTC Dream 32B PVT ENG-OFF this should guide you. (you dont need to install Cyanogen if you dont want to, its just the best bootloader/SPL guide I know.)
Did you try fastboot? If booting system and recovery fails *properly* (means you are lucky) then you will be able to use fastboot from the g1 screen (will say fastboot usb on top of the screen when you plug it into your computer).
Good luck with that one.
mblaster said:
Did you try fastboot? If booting system and recovery fails *properly* (means you are lucky) then you will be able to use fastboot from the g1 screen (will say fastboot usb on top of the screen when you plug it into your computer).
Good luck with that one.
Click to expand...
Click to collapse
Listen to the guy above.camera+startup (hold down)when phone is off. If you see 3 androids with skateboards. Your done sweating. If not. God help you!
sent from my superfroyo dream
Did you have to reboot the phone? If you did, that means the radio did not flash. After flashing the radio the phone should reboot itself.
Yes phone rebooted. but after that i flashed him with standart rc29. can standart rom downgrade the radio?
rc 29 was the DREAM.NBH??(been awhile)
if it was, then yes. it contained a radio img that flashed over yours and if your phone is in your hand when reading this, you have a brick in your hand sir.
Cyrix995 said:
Back+pwron is not working too.
Click to expand...
Click to collapse
I wasn't aware back and power did anything. Home and power may get you into your recovery. try that and go from there?
thank you all, who tried to help me! I was successfuly debricked my dream over jtag interface. Big thanks to Cyanogens jtag wiki! Thank you guys you are the best! XDA is the best! And i am ver-very happy!!!
rooted using Androot (via theunlockr.com) running CM6 with latest radio + death SPL I think ... yesterday phone was low on battery and turned off this morning it won't boot....keep getting stuck at G1 logo
holding home + power key doesn't work....it stays at G1 logo
pressing camera + power brings me to fastboot
Dream PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.23.02
Apr 20 2009, 15:30:43
when I press HBOOT
SD checking...
Loading...[DREADIAG.ZIP]
No image!
SD checking...
Loading...[DREADIAG2.ZIP]
No image!
SD checking...
Loading...[DREADIAG.NBH]
No image! or wrong image!
etc
etc
etc
etc
I don't think SDK properly installed on my computer
is there a way I can just backup some img onto my memory card?
or any way to do it by loading stuff onto the memory then
flash it that way?
I don't want to buy a new phone yet and my phone was working fine just don't know why this happened???
please help!!!
Flashing a firmware bundle form the SPL has nothing to do with the SDK
What are you trying to flash exactly? It should be named 'DREAIMG.NBH'.
just trying to unbrick my phone....it will not boot...just stuck at G1 logo
I want my phone to work....1.6 or 2.2 cm6 either way....my memory card doesn't look corrupted it will reads it in my computer
To go to fastboot mode you have to press back + power, not cam + power! Pressing home + powser brings you to recovery.
The reason for blocking at G1 ma be also due to an overclocking kernel, so what do you want to do now?
AndDiSa said:
To go to fastboot mode you have to press back + power, not cam + power! Pressing home + powser brings you to recovery.
The reason for blocking at G1 ma be also due to an overclocking kernel, so what do you want to do now?
Click to expand...
Click to collapse
I push Cam + power to get to my fastboot / Hboot mode
pressing back + power did nothing
pressing home + power did not go into recovery mode....phone get stuck at G1 logo
I want to get my phone back into working condition........whether it's 1.6 or the cm6 2.2 ... just need to know how to get it back to work.
is there way to get to the recovery mode from fastboot/hboot mode....
Cam + power brings you to the bootloader, not into fastboot mode! These are two different things. You wrote, that you have 1.33.2005 SPL installed, so you should have the possibility to go into fastboot mode. From there you can reflash everything you need.
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.5 D/S ADS using XDA App
AndDiSa said:
Cam + power brings you to the bootloader, not into fastboot mode! These are two different things. You wrote, that you have 1.33.2005 SPL installed, so you should have the possibility to go into fastboot mode. From there you can reflash everything you need.
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.5 D/S ADS using XDA App
Click to expand...
Click to collapse
could you explain...how to flash everything I need in fastboot?
back + power to go in to fastboot
then what?...load radio, load spl again? ...then flash rom?
In fastboot first I would fash a new recovery image, then boot into that recovery and restore a nandroid b ackup or install a new rom.
Try to find the tutorial for setting up adb / fastboot. You should find it in this forum. Unfortunately I don't have the link now.
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.5 D/S ADS using XDA App
i kinda had the same problem:
http://forum.xda-developers.com/showthread.php?t=811137
hope it helps!
I can't get SDK to work =( typing fastboot devices did nothing =(
typing adb shell ... said no devices found ... I see the G1 driver but it have ! mark on it I can't find the correct USB driver for my computer to (WIN XP) to load
sdk can't see my devices ... what now?
@Glycerin50 did you solve your problem? do you have MSN?? I need help~
1. take sd out
2. hook it to your pc some how
3. seach for and download the DREADIAG.NBH file
4 flash that
jjcd51590 said:
1. take sd out
2. hook it to your pc some how
3. seach for and download the DREADIAG.NBH file
4 flash that
Click to expand...
Click to collapse
please be more specific
so if I find the DREADIAG.NBH file.....
just delete it off my memory card?
and put the new one in?
jjcd51590 said:
1. take sd out
2. hook it to your pc some how
3. seach for and download the DREADIAG.NBH file
4 flash that
Click to expand...
Click to collapse
teknodogg said:
please be more specific
so if I find the DREADIAG.NBH file.....
just delete it off my memory card?
and put the new one in?
Click to expand...
Click to collapse
Slow down!! I think the NBH file will downgrade your radio and then you will have a brick! Your SPL 1.33.2005 is not compatible with the 1X radio in the NBH file. Maybe it might work if it downgrades your SPL too. I never flashed the NBH file, so who knows what's inside?
At any rate, I would reflash recovery via fastboot and then flash a ROM via recovery.
Amon Ra recovery
http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1
If you don't have fastboot for your mac/PC/Linux, you can download it here:
http://developer.htc.com/adp.html
Your SPL (1.33.2005) will respond to fastboot commands from your PC.
Here's some info about SPLs and radios:
http://forum.xda-developers.com/showpost.php?p=6510019&postcount=76
gee one said:
Slow down!! I think the NBH file will downgrade your radio and then you will have a brick! Your SPL 1.33.2005 is not compatible with the 1X radio in the NBH file. Maybe it might work if it downgrades your SPL too. I never flashed the NBH file, so who knows what's inside?
At any rate, I would reflash recovery via fastboot and then flash a ROM via recovery.
Amon Ra recovery
http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1
If you don't have fastboot for your mac/PC/Linux, you can download it here:
http://developer.htc.com/adp.html
Your SPL (1.33.2005) will respond to fastboot commands from your PC.
Here's some info about SPLs and radios:
http://forum.xda-developers.com/showpost.php?p=6510019&postcount=76
Click to expand...
Click to collapse
if I could I would...right now I think my phone is bricked completely ...
home + power = no factory reset mode ... phone stuck at G1 screen
camera + power = no bootloader/fastboot ... phone stuck at G1 screen
track ball + power = blue led
I've charged the battery / pull out many times.....any one know other ways to do unbrick? or know someone who offeres JTAG services for cheap to unbrick my G1 =(
If you can't get into bootloader or recovery - you have a brick.
It would be cheaper to just buy another G1 from Craigslist or something, I heard you can pick one up for less then $50. JTAG will be more expesive most likely.
borodin1 said:
If you can't get into bootloader or recovery - you have a brick.
It would be cheaper to just buy another G1 from Craigslist or something, I heard you can pick one up for less then $50. JTAG will be more expesive most likely.
Click to expand...
Click to collapse
I know I have a brick that's why I'm asking for JTAG service or help.
you heard wrong...
teknodogg said:
you heard wrong...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=824095
borodin1 said:
http://forum.xda-developers.com/showthread.php?t=824095
Click to expand...
Click to collapse
one person got it from 3rd world country for $30 doesn't mean they're all $30 I have not seen one for less than $60 ... thx for trying
I'm getting the Mytouch HD/4G this Thursday Tmobile sales have offered it to me for $149 which I'm going to get.
thanks all~ I guess it's time to list it on ebay/craigslist as broken selling as it for parts!
Hi guys!
I've bought a HTC Dream ( Rogers ) on eBay and I receive it this morning. The phone was already root and it was using a Cyanogen mod for Froyo 2.2.
Then, I wanted to put the phone back in the stock ROM ( unrooted ) to do the process by myself to learn how it works. So I went on google and I found a tutorial ( sorry, can't give the link since I am a new user ) that told me to download the original SPL and .nbh ( got the T-Mo G1 .nbh ) and to go on recovery mode to flash the update.zip to apply the SPL update.
Here is the problem, I think I did the wrong thing and now my phone is stuck in a reboot loop and every time, it ends on the Recovery menu and I don't know what to do...
Please, anyone, help me fix my phone...
1. Turn off the phone (or pull out the battery).
2. Hold down the BACK and POWER button for about 2 seconds.
3. What does it say on the screen?
It said:
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Sep 2 2008
Serial0
Okay. Download the DREAIMG.nbh file and put it on the root of your SD card, then turn phone off. Hold down the CAMERA and POWER button. Press trackball to flash the image. Restart phone and it should boot up.
Sent from my HTC Dream using XDA App
It doesn't work.
It said: " 00028002
not allow "
If you're Europe/Dutch, try this one.
http://koushikdutta.blurryfox.com/G1/DREAMIMG-RC7.zip
Edit: oh nvm, you're Canadian.
Sent from my HTC Dream using XDA App
Thanks for your time and help.
Do you have any more idea?
Well, to get your phone to start back up and usable again is to download this and put it on the root of your SD card. Enter Recovery Mode by holding down the HOME and POWER button. Go down to "flash zip" or something among those words. Select the file and flash it.
That is DangerSPL, which is compatible with your currently installed radio (2.22.19.26I), so there is no need to worry about a brick. However, you'll want to verify that you have that radio installed by entering bootloader mode (BACK and POWER button).
Afterwards when your phone starts back up to Cyanogenmod, you'll probably want to follow this guide: http://forum.xda-developers.com/showthread.php?p=4330749#post4321428
I can't access to the recovery menu. Every time I boot the device, I am stuck at the red-green-blue-white screen with the informations about my device ( the informations I gave you yesterday ).
Are you sure? When you try to hold HOME and POWER, it doesn't boot into recovery mode? This is a hard one, I don't know what to tell you. Maybe the DREAIMG.nbh you were trying to flash was corrupted, or maybe your Camera/Back button is stuck, and every time you power on the phone, it thinks you want to power into Bootloader? Check to see.
On my SD card, I juste have haykuro_new_spl-signed plus the things that Android put automatically on the SD Card
I just found this: http://forum.xda-developers.com/showthread.php?t=544654
A guide on how to root a Rogers G1. Scroll down to the part where Haykuro edited his post to include a "how to unroot". It'll probably help.
Unfortunately, I can't access to the fastboot mode, here's a video to show you where I'm stuck:
http://img547.imageshack.us/i/file7761.mp4
Do you have Danger/Hard SPL? The stock SPL that comes with the phone doesn't support fastboot (at least on my G1).
Edit:
When rebooting and holding down camera button, If it shows:
HBOOT-0.95.0000 -- You have the stock SPL.
HBOOT-0.95.3000 -- You have the engineering SPL.
HSPL10.95.3000 -- You have HardSPL.
HBOOT-1.33.2005 -- You have Danger SPL
I have the stock SPL ( 0.95.0000 )
What should I do then?
Anyone have an idea? You probably know that it suck having a phone that you can't use :/
mytey0 said:
I have the stock SPL ( 0.95.0000 )
What should I do then?
Click to expand...
Click to collapse
The problem is you flashed a non rogers nbh when you unrooted.. and now you can't reflash it because it the rom is for tmobile and the phone says it can only flash rogers roms.
And since you have a very old spl you can't even flash the rogers rom..
To fix this you will need a gold card.. (maybe a friend or a spare htc phone can help you make one)
Once you have a gold card you can download that orange nbh I have in the 2708 thread, rename it DREAIMG.nbh and place it on the root of the sdcard.
That will flash an engineering spl (and a old french rom) with the eng spl you can flash a recovery and continue from their, or follow the 2708 instructions.
What if I dont know anybody with an htc or an Android phone? :/
My problem is the same.
Except for the following differences on the bootloader screen info:
DREA110 PVT 32B RUUNBH
&
RADIO-1.22.12.29