Hello! Guys, i have a little problem with me G1. I installed the RAs recovery, then through this recovery i tried to install SPL. This process finished with success, and recovery asked for pressing HOME+BACK button to reboot. After reboot my device was stoped on T-Mobile G1 splash screen. After 30 mins i disconnected the battery and put is back. Now my device is showing splash screen. PWRON+Camera is not working, Back+pwron is not working too. Please help! What can i do with my device now. thanks in advance. and sorry for my bad english!
Cyrix995 said:
Hello! Guys, i have a little problem with me G1. I installed the RAs recovery, then through this recovery i tried to install SPL. This process finished with success, and recovery asked for pressing HOME+BACK button to reboot. After reboot my device was stoped on T-Mobile G1 splash screen. After 30 mins i disconnected the battery and put is back. Now my device is showing splash screen. PWRON+Camera is not working, Back+pwron is not working too. Please help! What can i do with my device now. thanks in advance. and sorry for my bad english!
Click to expand...
Click to collapse
What radio did you have on your G1? What SPL did you flash? If you flashed DangerSPL with an 1.x radio, then you should have read a bit more in this forum, because you bricked your phone ....
Sent from my Htcclay's Superfly G1 using XDA App
ota-radio-2_22_19_26I
SPL: 1.33.2005
Cyrix995 said:
ota-radio-2_22_19_26I
SPL: 1.33.2005
Click to expand...
Click to collapse
The radio should be ok for flashing DangerSPL, even if it DangerSPL (1.33.2005) is never needed!
Did you flash the radio and the SPL without rebooting first?
In the WiKi you can find more information.
After radio flashing i did reboot, and after SPL flashing i tried to reboot, but device stopped on the splash screen! I think that i was killed the boot((((
Cyrix995 said:
After radio flashing i did reboot, and after SPL flashing i tried to reboot, but device stopped on the splash screen! I think that i was killed the boot((((
Click to expand...
Click to collapse
Did you check, that the new radio was really intalled? I suppose something went wrong and you were still on the 1.x radio. Then you flashed the DangerSPL, which is incompatible with that radio version ... Sorry, but there is only the possibility to find someone who knows to JTAG your phone.
i can jtag my phone, the shematix of jtag dongle is very simple and i can find parts for it in my country. Only one thing: i do not know where i can find bootloader for dream!
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_HTC_Dream
im not sure what your specifications are but if its a HTC Dream 32B PVT ENG-OFF this should guide you. (you dont need to install Cyanogen if you dont want to, its just the best bootloader/SPL guide I know.)
Did you try fastboot? If booting system and recovery fails *properly* (means you are lucky) then you will be able to use fastboot from the g1 screen (will say fastboot usb on top of the screen when you plug it into your computer).
Good luck with that one.
mblaster said:
Did you try fastboot? If booting system and recovery fails *properly* (means you are lucky) then you will be able to use fastboot from the g1 screen (will say fastboot usb on top of the screen when you plug it into your computer).
Good luck with that one.
Click to expand...
Click to collapse
Listen to the guy above.camera+startup (hold down)when phone is off. If you see 3 androids with skateboards. Your done sweating. If not. God help you!
sent from my superfroyo dream
Did you have to reboot the phone? If you did, that means the radio did not flash. After flashing the radio the phone should reboot itself.
Yes phone rebooted. but after that i flashed him with standart rc29. can standart rom downgrade the radio?
rc 29 was the DREAM.NBH??(been awhile)
if it was, then yes. it contained a radio img that flashed over yours and if your phone is in your hand when reading this, you have a brick in your hand sir.
Cyrix995 said:
Back+pwron is not working too.
Click to expand...
Click to collapse
I wasn't aware back and power did anything. Home and power may get you into your recovery. try that and go from there?
thank you all, who tried to help me! I was successfuly debricked my dream over jtag interface. Big thanks to Cyanogens jtag wiki! Thank you guys you are the best! XDA is the best! And i am ver-very happy!!!
Related
error when flashing hero > e:can't chown/mod /system/xbin (so such file or directory)
e:can't chown/mod /system/xbin (so such file or directory)
e:failure at line 80
All Hero roms give me this when I try to flash them, the 'line 80' sometimes changed though.
Any ideas? i really need me a hero.. lol thanks
Do you have Kaykuro's SPL AKA Danger 2005?
It is required for Hero ROMs...
AdrianK said:
Do you have Kaykuro's SPL AKA Danger 2005?
It is required for Hero ROMs...
Click to expand...
Click to collapse
yep.. reflashed it just incase.. have newest radio too. :/
APEX.7 said:
yep.. reflashed it just incase.. have newest radio too. :/
Click to expand...
Click to collapse
When you flashed the SPL did you physically press alt-s and home + back to reboot? (and not use the trackball)
Just trying to make sure it actually flashed. Could you also check by boot in to SPL (Home and camera ) and tell us what version it is?
AdrianK said:
When you flashed the SPL did you physically press alt-s and home + back to reboot? (and not use the trackball)
Just trying to make sure it actually flashed. Could you also check by boot in to SPL (Home and camera ) and tell us what version it is?
Click to expand...
Click to collapse
honesly can remember what buttons i pressed when flashing..
booted into spl got...
dre110 pvt 32b
hspl10.95.3000
cpld-4
Radio-2.22.19.26i
oct 20 2008
seria 10
...thank you so much for your help btw
APEX.7 said:
honesly can remember what buttons i pressed when flashing..
booted into spl got...
dre110 pvt 32b
hspl10.95.3000
cpld-4
Radio-2.22.19.26i
oct 20 2008
seria 10
...thank you so much for your help btw
Click to expand...
Click to collapse
No problem man
Okay, you're still on hardSPL XD
Basically when you flash the radio or SPL on Cyan's recovery, you must physically press the buttons to flash. Using the trackball will mean that when you reboot it will revert to how it was. You do have the correct radio, but not SPL.
So, grab the SPL and name it update.zip (as when cant flash any zip because that requires the trackball), alt-w to wipe, alt-s to flash, home+back to reboot. Don't touch the trackball at all.
when you boot up there will be no ROM, SPL flash formats your nand. So, after SPL flah leave your phone for a couple of minutes to be safe, then boot in to recovery and go to console. Type "ums_enable" to mount your sd in your computer so you can copy a ROM over. The "ums_disbale" when you're done and then "reboot recovery". Now wipee and flash, you can use the track ball for that too
AdrianK said:
No problem man
Okay, you're still on hardSPL XD
Basically when you flash the radio or SPL on Cyan's recovery, you must physically press the buttons to flash. Using the trackball will mean that when you reboot it will revert to how it was. You do have the correct radio, but not SPL.
So, grab the SPL and name it update.zip (as when cant flash any zip because that requires the trackball), alt-w to wipe, alt-s to flash, home+back to reboot. Don't touch the trackball at all.
Click to expand...
Click to collapse
you are my hero .. thank you very much for your time. yay i can finally get some hero.
APEX.7 said:
you are my hero .. thank you very much for your time. yay i can finally get some hero.
Click to expand...
Click to collapse
No problem, it's the summer holidays so I have frick-all to do ;-) lol
Ah, crud. Just installed spl-signed.zip and now my rooted dream refuses to boot past the HTC dream splash screen. Followed the instructions and cant even enter bootloader or recovery mode. WTF?? Any ideas??
hiroprotagonist said:
Ah, crud. Just installed spl-signed.zip and now my rooted dream refuses to boot past the HTC dream splash screen. Followed the instructions and cant even enter bootloader or recovery mode. WTF?? Any ideas??
Click to expand...
Click to collapse
Sounds like you might have a bricked device if you didnt install the 26I radio before when you first rooted.
Crud, crud crud crud! This is my gf's mom's dream... Was running a custom rom, cant remember which one it is... Now i am absolutely in the dog house. Any ideas on what i can do? Its not totally, bricked, is it?? Is there any such thing as a goldcard for the dream? Need help asap.
Nothing you can do, should have read the instructions.
Yes there is a goldcard for the dream, but it won't help you if the phone won't boot.
Is this a semi-brick or a full, unrecoverable brick? It does get to the htc dream splash screen, then stays there
hiroprotagonist said:
Is this a semi-brick or a full, unrecoverable brick? It does get to the htc dream splash screen, then stays there
Click to expand...
Click to collapse
Full brick, there really isnt a partial brick. Brick is completely unusable (no recovery, bootloader, or os), a semi-brick as you call it would be just no rom or no rom and recovery- but full access to bootloader
Well, cldnt sleep all last night. Been looking at posts trying to find a fix. JTAG, anyone?
hiroprotagonist said:
Well, cldnt sleep all last night. Been looking at posts trying to find a fix. JTAG, anyone?
Click to expand...
Click to collapse
No JTAG method, you'd need to open the phone and replace the motherboard.
rooted using Androot (via theunlockr.com) running CM6 with latest radio + death SPL I think ... yesterday phone was low on battery and turned off this morning it won't boot....keep getting stuck at G1 logo
holding home + power key doesn't work....it stays at G1 logo
pressing camera + power brings me to fastboot
Dream PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.23.02
Apr 20 2009, 15:30:43
when I press HBOOT
SD checking...
Loading...[DREADIAG.ZIP]
No image!
SD checking...
Loading...[DREADIAG2.ZIP]
No image!
SD checking...
Loading...[DREADIAG.NBH]
No image! or wrong image!
etc
etc
etc
etc
I don't think SDK properly installed on my computer
is there a way I can just backup some img onto my memory card?
or any way to do it by loading stuff onto the memory then
flash it that way?
I don't want to buy a new phone yet and my phone was working fine just don't know why this happened???
please help!!!
Flashing a firmware bundle form the SPL has nothing to do with the SDK
What are you trying to flash exactly? It should be named 'DREAIMG.NBH'.
just trying to unbrick my phone....it will not boot...just stuck at G1 logo
I want my phone to work....1.6 or 2.2 cm6 either way....my memory card doesn't look corrupted it will reads it in my computer
To go to fastboot mode you have to press back + power, not cam + power! Pressing home + powser brings you to recovery.
The reason for blocking at G1 ma be also due to an overclocking kernel, so what do you want to do now?
AndDiSa said:
To go to fastboot mode you have to press back + power, not cam + power! Pressing home + powser brings you to recovery.
The reason for blocking at G1 ma be also due to an overclocking kernel, so what do you want to do now?
Click to expand...
Click to collapse
I push Cam + power to get to my fastboot / Hboot mode
pressing back + power did nothing
pressing home + power did not go into recovery mode....phone get stuck at G1 logo
I want to get my phone back into working condition........whether it's 1.6 or the cm6 2.2 ... just need to know how to get it back to work.
is there way to get to the recovery mode from fastboot/hboot mode....
Cam + power brings you to the bootloader, not into fastboot mode! These are two different things. You wrote, that you have 1.33.2005 SPL installed, so you should have the possibility to go into fastboot mode. From there you can reflash everything you need.
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.5 D/S ADS using XDA App
AndDiSa said:
Cam + power brings you to the bootloader, not into fastboot mode! These are two different things. You wrote, that you have 1.33.2005 SPL installed, so you should have the possibility to go into fastboot mode. From there you can reflash everything you need.
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.5 D/S ADS using XDA App
Click to expand...
Click to collapse
could you explain...how to flash everything I need in fastboot?
back + power to go in to fastboot
then what?...load radio, load spl again? ...then flash rom?
In fastboot first I would fash a new recovery image, then boot into that recovery and restore a nandroid b ackup or install a new rom.
Try to find the tutorial for setting up adb / fastboot. You should find it in this forum. Unfortunately I don't have the link now.
Send from my G1 with HTCClay's UNOFFICIAL Superfly 1.5 D/S ADS using XDA App
i kinda had the same problem:
http://forum.xda-developers.com/showthread.php?t=811137
hope it helps!
I can't get SDK to work =( typing fastboot devices did nothing =(
typing adb shell ... said no devices found ... I see the G1 driver but it have ! mark on it I can't find the correct USB driver for my computer to (WIN XP) to load
sdk can't see my devices ... what now?
@Glycerin50 did you solve your problem? do you have MSN?? I need help~
1. take sd out
2. hook it to your pc some how
3. seach for and download the DREADIAG.NBH file
4 flash that
jjcd51590 said:
1. take sd out
2. hook it to your pc some how
3. seach for and download the DREADIAG.NBH file
4 flash that
Click to expand...
Click to collapse
please be more specific
so if I find the DREADIAG.NBH file.....
just delete it off my memory card?
and put the new one in?
jjcd51590 said:
1. take sd out
2. hook it to your pc some how
3. seach for and download the DREADIAG.NBH file
4 flash that
Click to expand...
Click to collapse
teknodogg said:
please be more specific
so if I find the DREADIAG.NBH file.....
just delete it off my memory card?
and put the new one in?
Click to expand...
Click to collapse
Slow down!! I think the NBH file will downgrade your radio and then you will have a brick! Your SPL 1.33.2005 is not compatible with the 1X radio in the NBH file. Maybe it might work if it downgrades your SPL too. I never flashed the NBH file, so who knows what's inside?
At any rate, I would reflash recovery via fastboot and then flash a ROM via recovery.
Amon Ra recovery
http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1
If you don't have fastboot for your mac/PC/Linux, you can download it here:
http://developer.htc.com/adp.html
Your SPL (1.33.2005) will respond to fastboot commands from your PC.
Here's some info about SPLs and radios:
http://forum.xda-developers.com/showpost.php?p=6510019&postcount=76
gee one said:
Slow down!! I think the NBH file will downgrade your radio and then you will have a brick! Your SPL 1.33.2005 is not compatible with the 1X radio in the NBH file. Maybe it might work if it downgrades your SPL too. I never flashed the NBH file, so who knows what's inside?
At any rate, I would reflash recovery via fastboot and then flash a ROM via recovery.
Amon Ra recovery
http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1
If you don't have fastboot for your mac/PC/Linux, you can download it here:
http://developer.htc.com/adp.html
Your SPL (1.33.2005) will respond to fastboot commands from your PC.
Here's some info about SPLs and radios:
http://forum.xda-developers.com/showpost.php?p=6510019&postcount=76
Click to expand...
Click to collapse
if I could I would...right now I think my phone is bricked completely ...
home + power = no factory reset mode ... phone stuck at G1 screen
camera + power = no bootloader/fastboot ... phone stuck at G1 screen
track ball + power = blue led
I've charged the battery / pull out many times.....any one know other ways to do unbrick? or know someone who offeres JTAG services for cheap to unbrick my G1 =(
If you can't get into bootloader or recovery - you have a brick.
It would be cheaper to just buy another G1 from Craigslist or something, I heard you can pick one up for less then $50. JTAG will be more expesive most likely.
borodin1 said:
If you can't get into bootloader or recovery - you have a brick.
It would be cheaper to just buy another G1 from Craigslist or something, I heard you can pick one up for less then $50. JTAG will be more expesive most likely.
Click to expand...
Click to collapse
I know I have a brick that's why I'm asking for JTAG service or help.
you heard wrong...
teknodogg said:
you heard wrong...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=824095
borodin1 said:
http://forum.xda-developers.com/showthread.php?t=824095
Click to expand...
Click to collapse
one person got it from 3rd world country for $30 doesn't mean they're all $30 I have not seen one for less than $60 ... thx for trying
I'm getting the Mytouch HD/4G this Thursday Tmobile sales have offered it to me for $149 which I'm going to get.
thanks all~ I guess it's time to list it on ebay/craigslist as broken selling as it for parts!
OK so i had a HTC Dream with supergingerbread or something installed with
SPL: 1.33.0013d (hboot)
RADIO: 2.22.27.08 / 28.25
It drained battery while i was doing something at 4 hours, and 12 hours on idle and only on idle.
I decided to install superfroyo 2.6 but it gave me a error ( status 7 ) on my recovery.
I thought it might have been because of the SPL and RADIO so i tried to install DeathSPL and RADIO 3.22.26.17 and the guide i was following told me to install the radio first which i did. after i finished flashing the radio my phone told me to reboot and so i did. an android with a download bar showed up and in the next 5 seconds i could boot at all, stuck at rogers screen and fastboot or recovery wont boot up.
At times tho i get passed the rogers screen but then all i get is a black screen and sometimes there bars going across the screen probably because it thinks i flipped the screen or something ( accelerometer is acting up =/.
any help would be appreciated like maybe a cheap jtag place nearby toronto thats cheap or maybe even a more dangerous/less reliable option since i have nothing to lose =/.
thank you
I know you mentioned that it won't go into fastboot (back+power). Just want to know. What happends when you hold camera+power buttons? Will it come up with the other screen?
no that doesnt work, i tried every button + power, all i found out is that the mysterious black screen comes up sometimes and if i do trackball + power, the screen goes black with a blue LED.
Here is some info I found. See if it works.
if you are willing to lose almost everything on your phone that is installed on your internal memory then...
1. Turn the G1 off. If it’s frozen on, take the battery out and put it back in the unit.
2. Hold the Home and Power keys down at same time for about 25 seconds. You will see a yellow triangle screen with exclamation point in the middle.
Now to wipe the device clean:
3. Press Alt+L.
4. Press Alt+W for a factory reset.
5. Press the Home and Back keys again for about 25 seconds.
The device should then reset again and the hard reset is complete.
Click to expand...
Click to collapse
tried it 3 times and no luck
Which guide did u follow? Try asking on ezterry's thread? Just wonder if the radio spl are compatible. Confused as to why u did that
Sent from my Dream/Sapphire using XDA Premium App
Taken from : http://wiki.cyanogenmod.com/index.php?title=Dream:DangerSPL
Prerequisites
A rooted G1/Dream
Amon_Ra Recovery
The following files on the root of your SD card:
A compatible radio for the device version:
2.22.23.02 T-Mobile / US*
2.22.19.26i Non US (md5: aeecdb49b74a0d4bb67f9d8af70c1889)
3.22.26.17 or 3.22.20.17 Rogers/Orange
DangerSPL
DangerSPL
Flashing Radio
Amon_Ra's Recovery process
Boot into Recovery by holding the Home and Power button while the device boots
Scroll down to Flash zip from sdcard
Select the Radio update.zip
The HTC Dream will reboot during this process
Once the installation has finished, select Reboot system
ClockworkMod Recovery process
ClockworkMod Recovery is not recommended for the Dream. Please upgrade to Amon_Ra.
Flashing DangerSPL
Boot into fastboot by holding Camera
Double Check that you have a compatible radio or you will brick the device!
Press Send+Menu+End to reboot
Boot into recovery by holding Home
Select Flash zip from sdcard
Select the DangerSPL update.zip
It will install and then ask you to reboot to finish the installation. Reboot as prompted at the bottom of the screen. This will finish installing DangerSPL and reboot back into recovery so you can flash CyanogenMod.
johnson8cyl said:
Which guide did u follow? Try asking on ezterry's thread? Just wonder if the radio spl are compatible. Confused as to why u did that
Sent from my Dream/Sapphire using XDA Premium App
Click to expand...
Click to collapse
i already sent him a pm to ask him kindly if he could jtag my phone, didnt put a price on it and i hope he doesnt ask for one either =/.
anyway even if the spl and radio were compatible whats the use, the phone only boots up sometimes ( like 1 in 5 tries or something ) and when it does all it is is a black screen.
Bump, out of sadness ='(
Do me a favor and try to to these and see what happens. Turn off each time and do it.
home+power, hold for about 25 sec and release.
camera+power, hold for about 25 sec and release.
back+power, hold for about 25 sec and release.
call+menu+power, hold for about 25 sec and release.
Also try them with SD card out of the slot, and also with SIM card out of the slot.
Let me know what happens.
@beenandroidized . I noticed that you got the same hboot and radio i was attempting to put on my g1.but now it won't boot up . Recovery and hboot still work and I know the problem is cause when i flashed the hboot it turned s-on on my g1. Do you know how to change it back to s-off ?
Sorry, I could not begin to tell you how to change it. Originally, I went I first rooted my G1 with instruction I found by googling, my G1 was at S-OFF. But after the ROM I had crashed on my and I had to reflash everything, my G1 is on S-ON. My guess it was the "Generic G1 ROM w/ Root" that I flashed at the time that changed it to S-OFF.
codey895 said:
@beenandroidized . I noticed that you got the same hboot and radio i was attempting to put on my g1.but now it won't boot up . Recovery and hboot still work and I know the problem is cause when i flashed the hboot it turned s-on on my g1. Do you know how to change it back to s-off ?
Click to expand...
Click to collapse
Just download the 2005 engineering spl in ezterry's thread and flash in recovery to get s off. But u will lose the 14mb of ram u gained
Sent from my Dream/Sapphire using XDA Premium App
BeenAndroidized said:
Sorry, I could not begin to tell you how to change it. Originally, I went I first rooted my G1 with instruction I found by googling, my G1 was at S-OFF. But after the ROM I had crashed on my and I had to reflash everything, my G1 is on S-ON. My guess it was the "Generic G1 ROM w/ Root" that I flashed at the time that changed it to S-OFF.
Click to expand...
Click to collapse
Rom doesn't change security. The spl does
Sent from my Dream/Sapphire using XDA Premium App
BeenAndroidized said:
Do me a favor and try to to these and see what happens. Turn off each time and do it.
home+power, hold for about 25 sec and release.
camera+power, hold for about 25 sec and release.
back+power, hold for about 25 sec and release.
call+menu+power, hold for about 25 sec and release.
Also try them with SD card out of the slot, and also with SIM card out of the slot.
Let me know what happens.
Click to expand...
Click to collapse
never tried taking the taking the sd card, sim card, or call+menu+power but i will try it, i thank you guys for all the support.
i will get to this in 2 - 3 hours since im currently at school.
johnson8cyl said:
Rom doesn't change security. The spl does
Click to expand...
Click to collapse
Sorry, still learning all this while trying to help other in needs.
bloodman376 said:
never tried taking the taking the sd card, sim card, or call+menu+power but i will try it, i thank you guys for all the support.
i will get to this in 2 - 3 hours since im currently at school.
Click to expand...
Click to collapse
Just something I found while I was googling on the subject. For some reason some one had mentioned that SD card gets corrupted and it can cause the phone to do that. And that was how they fixed their problem. Never hurt to try.
BeenAndroidized said:
Sorry, still learning all this while trying to help other in needs.
Click to expand...
Click to collapse
No need for sorry at all. I learned it too. Just filling u in.
Sent from my Dream/Sapphire using XDA Premium App
No luck as usual... =/
bloodman376 said:
No luck as usual... =/
Click to expand...
Click to collapse
No luck for what method?
Did you tried
johnson8cyl said:
Just download the 2005 engineering spl in ezterry's thread and flash in recovery to get s off. But u will lose the 14mb of ram u gained
Click to expand...
Click to collapse
If you flash a radio or SPL from recovery in that the new combo is unable to boot the current recovery you get stuck in boot mode 3 unable to boot the phone, get into fastboot ect.
This is why fastboot was the recomended way to install 2708+ radio, SPL, and recovery.. it allowed for a safe way to go from any radio/eng SPL to the new stack.
I've never seen the 3.22 radios is an update.zip in the wild, but if you used one to go from a 2.22/ebi0 recovery to a 3.22/ebi1 recovery, but the ebi0 recovery still installed, you are likely now bricked.. only hope is recovery is not reconized and let's you access fastboot commands with the USB wire attatched (even if you are stuck on the splash screen)
My jtag method will repair this.. but I havn't jtagged a phone in a while and its become a boring long painful process. Not including the time for you to get the phone to me and for me to get it back to you. Its proven not worth it on my part.
Hello, can't get passed the G1 screen, I've rooted my NookColor and thought, hey I could do this to my phone.... guess not
TIRED OF SEARCHING, just simply trying to install Ginger Yoshi RC7 or RC6.1
After I answer no to the few questions, (partitioned, y/N,stock launcher and 60 something) It completes the install of the ROM so then I power off (remove the bat) and boom, stuck at the G1 screen when I power on.
Steps I took to get here:
1) Put all zip files into root of SD
2) Download install ClockModRecovery
3) Boot into recovery using ClockMod from market
4) superwipe, remove bat, power on, recovery mode
5) flash Radio remove bat, power on, recovery mode
6) flash hboot remove bat, power on, recovery mode
7) Flashed ROM, remove bat, power on... Now stuck at G1 Screen
I gathered my information from here:
http://forum.xda-developers.com/showthread.php?t=932118
Here's what I see (Camera + power)
"
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2009 (DREA10000)
CPLD-4
RADIO-2.22.33.02
[wrong date and time displayed here]
HBOOT
<BACK> FastBoot Mode
"
Your SPL radio combo is not compatible to your ROM. try SPL 13d and radio 2708 combo. This will also give you 14MB extra.
BeenAndroidized said:
Your SPL radio combo is not compatible to your ROM. try SPL 13d and radio 2708 combo. This will also give you 14MB extra.
Click to expand...
Click to collapse
Really? I stole my info from the Yoshi guys signature. dang, okay, where can I [FOUND it] SPL 13d and radio 2708 combo?
THANKS MAN!!
LOL! That's the first stealing it from someone sig. Thanks for making me laugh. (no pun intended)
There are different combo on SPL/radio out that will work with a certain ROM. And sometime depends on what being loaded (flash).
Try this link below by ezTerry. Follow his instruction and it should be OK!
http://forum.xda-developers.com/showthread.php?t=831139
You can also try different ROM. Like the one I use. Make sure if you flash SuperAosp to also flash the 15MB-boot file. Then that will be OK.
EDIT:
Oh BTW, I checked the guy sig. New SPL does not meant the same as what you have.
Phone: Black G1
ROM:ginger Yoshi RC7
SD:2gb
Radio: 2.22.23.02
SPL: new ^_^
Recovery: RA-dream-v1.7.0
Click to expand...
Click to collapse
After flashing 13d it booted into RC7 just fine, thanks again!
You are welcome. Glad to be of service.
bummer
So my gallery wont open using the RC7, FB crashes all the time and my battery life is terrible. Any ideas?
Again, thanks for your help!
NetworkGeek said:
So my gallery wont open using the RC7, FB crashes all the time and my battery life is terrible. Any ideas?
Again, thanks for your help!
Click to expand...
Click to collapse
have not tried the latest gingeryoshi, im using COSDS and ADS Magpie so far no FC.
to improve battery life, try this setup here
http://forum.xda-developers.com/showthread.php?t=1040678
u need to install setcpu from the market, but other than that, it is fairly simple
I recently flashed a custome recovery as my phone didn't have one. I flashed "United CWM v5.0.2.8 and followed the steps there. After "adb reboot," it just stays on the black Android screen. It won't let me boot into recovery, like if it doesn't recognize the home key. When i hold camera button and power button, it says no flash image found.
Is my phone bricked? Is there anyway i can reset the whole phone?
Any help would be appreciated.
i assume you are rooted. what is your spl/hboot ?
when you hold down camera what does it say?
http://wiki.cyanogenmod.com/wiki/HTC_Dream:_Rooting
read this...
i believe your dreaimg.nbh file is corrupted...
hat radio and spl are u on???
and 32b device???
alokated said:
http://wiki.cyanogenmod.com/wiki/HTC_Dream:_Rooting
read this...
i believe your dreaimg.nbh file is corrupted...
hat radio and spl are u on???
and 32b device???
Click to expand...
Click to collapse
No, he never said he's trying to flash a dreaimg.nbh
OP:
Yeah, I don't think the new recovery was very safe to flash. It's not for all devices.
If you have 1.33.0013d go here, and scroll down to "If you find yourself stuck without recovery".
If you have an engineering SPL, such as 1.33.2005, then use fastboot to flash your old recovery back.