Related
Just got my Note straight from the UK, unlocked. Been on the phone with ATT about 6 times. I can send and recieve calls, texts - but no DATA. They can't seem to figure out why it will not pick up the ATT Data Network. Sim, EIN all linked, but no joy.
I am a noob, sorry - any ideas. I hate to send the phone back.
Any ideas ?
Update - Funk2641's response below (no APN was entered) - fixed it the issue.
Still, ATT would not give me a 4G smartphone plan - even though the H+ shows up next to the clock ? Initial Speedtests look like the same as my Infuse, Atrix and 4S.
Thanks everybody (Funk2641) for your help ! I hope this thread saves some agony for many as this phone is hitting the states. Don't know if I will tread in Eurospec for the Nexus, as I will want to hold that one in my hand first.
Also, this is a great phone - speed, battery life and the screen is fantastic !
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
No, I will give it a try.
Thx.
please keep posted.....I'll be on Att Friday
I will follow this thread since I will also switch from T-mobile to AT&T.
I too have the same issues. I actually used a few different apns and got edge to work poorly, I sighed and told myself ICS would fix it all up better and to just enjoy the extra battery life of 2g now, God I hope a get this cleared up
Sent from my GT-N7000 using xda premium
Technically, the Note is just a big SGS2. There's no reason on the phone side you should be having a problem using the Cingular APN. I'm using a ISGS2 and a UK 3G Tab 10.1 on AT&T with no problem. It's either something with the provisioning of your account or your Note may not have the right bands (Asian?). The latter is unlikely if you ordered it from the UK. Try reseting the APN to default under network settings. Also, if you're on a legit 4G plan there's a specific APN that you can find on the ASGS2 forum.
Here is another APN that works, I had the same issue
For APN settings use the name ATT and then for APN the word phone. Leave everything else blank-what is needed will get filled in automatically. Click the APN when you finish adding it and the radio button turns green to indicate it is working. The advantage to this APN setting is it gives you clear access and data speeds are not limited by ATT.
Those apns didn't work and I too a would doubt my phone bring the Asian version,.this version of gingerbread has the option to suspend my data network from holding down the power button maybe the software isn't...... I don't know I have no clue but my apns are normal but when's search they don't come up
In the list automatically so something a wrong
and I came from a hspa+ phone so my plan is already to go, I called to double check
to op, glad you got it straightened out...who did you order from and how much?
Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Doc, I need it by the weekend like a drug, can you suggest a place to get it from. I'm Stateside and on AT&T if it helps!
drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
the.mister.d said:
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
Click to expand...
Click to collapse
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
with the note you need to set manually the APN?did not set automatically?After insert the SIM Card and restart is not set?
Funk2641 said:
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Click to expand...
Click to collapse
That's nice! Thank you!
I will be ordering mine this weekend. Not sure though which place yet !
Waiting to see if I can get it any cheaper from India. Have folks coming from India to NY in two weeks. Lets see!!
Thank you again!
I cannot connect to at&t. under APN i get "no items" and cannot get to a place to enter apn settings.
"use packet data" is selected
network mode is gsm/wcdma (auto mode) is selected
"search networks shows select automatically, at&t, and at&t. I have tried all three
i get regestered on network, but still will not connect help!
I am on the iphone plan with unlimited data, worked just fine in galaxy tab original 7"
i tried using funks apn settings and i still have nothing, i came from an atrix where i always got H+ and now here are me speeds, my speed test was done in detroit, i live in NJ my ping was 317, U 144 kbps D 155 kbps, i have no idea what is wrong with this phone but att can get going on it, i called and they have nothing for me!!! i dont know what to do
What plans are you guys, please?
(Anyone on month to month $50 unlimited?
There are two different APNs to use depending on what data plan you're on. If you're using a MediaNet or Data for non-Smartphones plan (3G) you need to use the Cingular APN. If you're on a legit 4G plan you need to use the special APN for 4G phones. If you reverse it, you'll get no data. For those of you on the 4G plan, go in to the APN settings. When you press menu, there's a reset to default option. It should pull the 4G settings down automatically. If you're on a 3G plan don't do this and instead manually enter the below settings. If you do this correctly you should get data. If you have a quad-band phone and still can't get data it's something with your account settings and not the h/w.
Cingular APN from the SGS2:
Name: Cingular 410
APN: wap.cingular
Proxy: null
Port: null
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: null
MCC: 310
MNC: 410
Authentication type: null
APN Type: internet + mms
4G APN from ASGS2 (There are two)
Name: ATT PHONE
Everything null except
MCC 310
MNC 410
APN type: Internet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: mms,supl
I've seen some AT&T customers complain about terrible speeds and latency when doing speed tests. I too had this issue. Before the fix, I was getting about 20 kbps downstream and 400+ latency. After, I'm getting 6+ mbps and 80-120 latency. I fixed mine by adding a new APN with these settings. To change them, go to SETTINGS -> MORE... -> MOBILE NETWORKS -> ACCESS POINT NAMES. From here, either select the existing one or click the menu key to create a new one. Also, if you create a new one, make sure to select it after you're done making it. (you have to tap the radio to select it because tapping the name will edit it but NOT select it).
The blank ones are blank/unspecified. You probably only need to change APN and APN type (the other shown values were already like this on mine). For APN type, those are commas separating the terms. I posted a link to 3 shared screenshots so you can see what it should look like.
APN: phone
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MCC: 310
MNC: 410
Authentication type:
APN type: default,supl,agps,fota,dun
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable (this is checked but grayed out on mine)
Bearer:
https://www.dropbox.com/sh/p65dvtd2ff4y46a/oAjj5Bv8qi
whittikins said:
I've seen some AT&T customers complain about terrible speeds and latency when doing speed tests. I too had this issue. Before the fix, I was getting about 20 kbps downstream and 400+ latency. After, I'm getting 6+ mbps and 80-120 latency. I fixed mine by adding a new APN with these settings. To change them, go to SETTINGS -> MORE... -> MOBILE NETWORKS -> ACCESS POINT NAMES. From here, either select the existing one or click the menu key to create a new one. Also, if you create a new one, make sure to select it after you're done making it. (you have to tap the radio to select it because tapping the name will edit it but NOT select it).
The blank ones are blank/unspecified. You probably only need to change APN and APN type (the other shown values were already like this on mine). For APN type, those are commas separating the terms. I posted a link to 3 shared screenshots so you can see what it should look like.
APN: phone
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MCC: 310
MNC: 410
Authentication type:
APN type: default,supl,agps,fota,dun
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable (this is checked but grayed out on mine)
Bearer:
https://www.dropbox.com/sh/p65dvtd2ff4y46a/oAjj5Bv8qi
Click to expand...
Click to collapse
Do you get H+ insted H?? if u dont mind can you check in Settings, about phone and Status. in mobile network type HSPA:10 or HSPA+:15????
Didn't work for me (data gets disabled), however the only APN settings that have worked so far are the stock ones with wap.cingular.com. I have tried numerous other ones to no avail..
thekooliest said:
Didn't work for me (data gets disabled), however the only APN settings that have worked so far are the stock ones with wap.cingular.com. I have tried numerous other ones to no avail..
Click to expand...
Click to collapse
you have to have a lte data plan for this apn to work.
cundiffr said:
you have to have a lte data plan for this apn to work.
Click to expand...
Click to collapse
Thanks..I honestly didn't think there was a difference between the LTE and non-LTE plans at AT&T. But my dad is in charge of the plan, so maybe I am missing something.
I'm using the same Stock AT&T PTA apn I've used since the Infuse 4g and it works perfect. Stock APN I couldn't even get 20kbps most of the time. Now I can at least get 5.7 (about what I'm used to in my area).
pbpatel1981 said:
Do you get H+ insted H?? if u dont mind can you check in Settings, about phone and Status. in mobile network type HSPA:10 or HSPA+:15????
Click to expand...
Click to collapse
I've seen it at both.
Sent from my Nexus 4 using Tapatalk 2
I'm using the pta APN since I came from an LTE phone so my sim is provisioned for it. I usually got about 8-9mbps down in this location when on my sgs3 so if these speeds stick and improve I'm quite happy. Obviously uploads are the biggest hit but not too worried about that
Sent from my Nexus 4 using Tapatalk 2
mobilehavoc said:
I'm using the pta APN since I came from an LTE phone so my sim is provisioned for it. I usually got about 8-9mbps down in this location when on my sgs3 so if these speeds stick and improve I'm quite happy. Obviously uploads are the biggest hit but not too worried about that
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
howd you get speed test to work?
joshyy_rey said:
howd you get speed test to work?
Click to expand...
Click to collapse
It wouldn't work for me with the default WAP.Cingular APN. As soon as I changed it to the hspa+ one, speed test worked.
For this of you on the pta APN, does your MMS work? If so, do you still have the WAP.Cingular APN in the list (just not checked)? Or is the pta APN the only one listed?
I too have my Sim provisioned for lte, but if I use the pta APN, I get great data speeds, but no MMS. Thanks.
Sent from my Nexus 4 using xda premium
Many thanks for posting this! My internet donwload speeds went from .001 MBPS download to 2.97MBPS. I hate to say this, but it still felt snappy even at .001 MBPS. My Galaxy S2 was so slow to process websites.
solved minus mms......
I get faster speeds with the new APN, but I can't get H+ in areas where is was able to get it with my S3. Anyone have a solution?
thanks for this!
Posted this on another similar thread. Worked for me. It's the Cingular.WAP APN but slightly different.
"Anybody still having issues with att H+ speeds try the APN settings from this link
http://nerdynerdnerdz.com/blog/2011/07/23/att-apn-mms-settings-android/
My speed increased by 600% when I switched to this, from barely 1Mbps to 6+Mbps. I also can run the speed test app now whereas before I could not."
Sent from my Nexus 4
AT&T Northwest Indiana Southeast Chicagoland
Sent from my Nexus 4 using xda app-developers app
apolloms said:
solved minus mms......
Click to expand...
Click to collapse
Modify the following and you'll have MMS again:
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MaxCarnage said:
Modify the following and you'll have MMS again:
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
Click to expand...
Click to collapse
So do you use the OP setting plus this? or the one posted a few posts up? also is a LTE data plan def required?
DRamer77 said:
So do you use the OP setting plus this? or the one posted a few posts up? also is a LTE data plan def required?
Click to expand...
Click to collapse
Yes, add this to the OP and everything will work.
I came across this topic on rootzwiki a while back and it's helped me a few times. Obviously it's for ATT only.
http://rootzwiki.com/topic/31135-att-apns-for-custom-roms/
Just like the title say, what Rom are you running using Verizon LG G2 and if you are running T-Mobile Rom please leave more info about what works and what's not (looking for a tmobile Rom for my vs980 as well.
I'm running ROM : Malladus 2.0.2
With out any changes
So far everything works fine 4G LTE few drops in some areas but that is normal I guess. SMS,MMS and calls works (using hangouts for txt and mms I just like it better than stock.
I'm on JackpotClavin's 24A-based CM11, and it is pristine.
Sent from my Nexus 7
I just switched from Verizon to T-Mobile this week with my VS980.
I've been able to get the phone setup and working mostly.
I'm picking up LTE, but it's slowish. Usually only picking up 1 or 2 bars and tot more than 12 mbps down/1 mbps up according to Speedtest, though that might just be my area. I'm in a larger city but still in the Midwest.I can make/receive calls just fine. I can send and receive MOST texts. Some text messages/calls I'm not receiving. Specifically, I have my online bank account setup to require a code which the bank sends via text message or call and my phone does not receive either, even though I'm getting texts/calls from other sources. This is actually kind of a big pain for me and if anyone could help me solve it I would be most appreciative.
I'm running CM 11 nightly. I did flash the 12b radio. I haven't tried the 24A radio yet.
Preferred Network is T-Mobile, although I've had the phone search networks a couple different times and there is always 3 T-Mobile networks listed and I'm really not sure if there is a difference or if there is a specific one I should be selecting since there is no way to differentiate them.
Mobile Network Settings
Data enabled: Checked
Data roaming: Blank
Preferred network type: LTE - Maybe this should be Global? I don't have a Global option: just "LTE (recommended)", 3G, or 2G.
APN Settings
APN: fast.t-mobile.com
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: https:// mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: Not set
MMS port: Not set
MCC: 310
MNC: 260
Authentication type: Not set
APN type: Not set - It was "default,mms,supl". In the docs/guides I've seen it usually says <Not set OR Internet+MMS. Maybe this is the source of my not receiving texts from my bank? What is the correct setting here?
APN protocol: IPv4/IPv6
APN roaming protocl: IPv4
APN enable/disable: Greyed out
Bearear: Unspecified
MVNO type: None
MVNO value: Greyed out
My stock rom lg g2 vs980 can get 4g lte.
Sent from my VS980 4G using XDA Free mobile app
Update (1
I removed the sim card, started the phone with out it, powered down, and reinserted the sim.
I was just able to create new APN with the below settings (ST website), I did notice that in the beginning with I was using the new APN’s, that the signal bar had 4 – 5 bars, but at no time did the LTE or 4G symbol ever show up at the top.
Sometimes this new APN shows 4 bars, and no LTE?4G, sometimes 2 bars showing, and the LTE/4G symbol is showing. But can't open a single websites, was able to get one short text through, but took a couple of tries.
(3) ST website
APN: wap.tracfone
AUTH_TYPE: None
MMSC: http://TF.mmsmvno.com/mms/wapenc
APN Type: default,mms,supl
I’ve been using Straight Talk for about five years, floating back and forth between AT&T, and T-Mobile smart phones.
Normally this is easy as pie, and straight fwd. But so far I used about (5) different T-Mobile APN settings for my T-Mobile Galaxy Note 5, and none of them are working.
I bought this phone off eBay, and it was less than I month old (there’s not mark on it anywhere), and it was listed as “Clean ESN”. I’ve bought several phones used via eBay, and ever had an issue. I checked the phone, and it came back clean.
1. Rather than going on ST website, and activating my new phone, and sim card, I call support. The agent took my sim serial number, and activated it. About 30 minutes later I lost network connectivity with my former S4 phone, so I figure the Note 5 was ready to go. I went with a live person, because I was hoping to do (2) things, register the new phone/sim, and get a new phone number, as moved out of state a couple weeks ago, and want a local number. Agent said I would have to wait until Monday, call back to get a new number.
2. I sent a text to a friend, but it didn’t go, after few minutes it would come back with a fail. After retrying I few times it finally went through. I had the same issue, with trying to call. It will have 4 or 5 bars, you make a call, then it will say “mobile network not available”, and then the signal bars turn into an X
3. After creating the first new APN, and restarted the phone, and after boot, I have 4 – 5 bars, but then it will turn into an X. My phone will sit there with 4 – 5 bars for like ever, then when I send a text it it will start losing bars, and the got a X.
4. I’ve created about 4 or 5 new APN’s, and they all do the same thing, once in a while a text will get through. WiFi works great, can surf the net all day.
Samsung Galaxy Note 5 GOLD
32GB 16.01
SM: N920T
T-Mobile
(1)
Straight Talk T-Mobile service:
Name: straight talk
APN: wap.tracfone
Proxy:
Port: 8080
User Name:
Password:
Server:
MMSC: http://mms.tracfone.com
MMS Proxy: 216.155.165.40
MMS Port: 80
MCC: 310
MNC: 410
Authentication type:
APN type: Not Set, or Internet+MMS Have also used: default,hipri,supl,mms,tfdata
APN Protocol IPv4
APN enable/disable blank
(2)
Name: straight talk
APN: wap.tracfone
Port: 8080
MMSC: http://mms-tf.net
MMS Proxy: Leave blank
MMS Port: Leave blank
Again, for user name and password leave it in blank
So ...I feel stupid asking but if your using t mobile service don't u want tmobile apns? Or at least the correct MNC?
Sent from my SM-N920C using XDA-Developers mobile app
---------- Post added at 01:41 PM ---------- Previous post was at 01:31 PM ----------
Try these ...first is default..second u can manually switch to in low signal areas :
First:
Name - T-Mobile LTE
APN- fast.t-mobile.com
Mmsc leave blank BUT if u want to try adding it or have any issues try it
http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC 310
MNC 260
APN type- default,supl
APN protocol ipv6
APN roaming protocol ipv4
Everything not mentioned leave blank or not set as it comes when you add a new apn.
This other one Helps me pickup the HSPA that is still around me although being phased out
Name: T-Mobile HSPA (obviously u can name however)
APN- epc.tmobile.com ( no typo it's without - in T-Mobile
MMSC- http://mms.msg.eng.t-mobile.com/mms/wapenc
APN type - default,supl,mms
APN protocol ipv4
APN roaming protocol ipv4
Good luck
Sent from my SM-N920C using XDA-Developers mobile app
We know how much you like to stream, ahem, "videos", and so cellular data is mega-important. Rate this thread to express how you think the Razer Phone 2's LTE performs. A higher rating indicates that it's fantastic: throughput is excellent and signal strength is top-notch.
Then, drop a comment if you have anything to add.
XDA_RealLifeReview said:
We know how much you like to stream, ahem, "videos", and so cellular data is mega-important. Rate this thread to express how you think the Razer Phone 2's LTE performs. A higher rating indicates that it's fantastic: throughput is excellent and signal strength is top-notch.
Then, drop a comment if you have anything to add.
Click to expand...
Click to collapse
I have noticed periodic Data drops on the phone. I am using AT&T.
Same Old Dude said:
I have noticed periodic Data drops on the phone. I am using AT&T.
Click to expand...
Click to collapse
Had to call AT&T, especially since they picking RP2. As result:no results, I pretty much don't have LTE, and constant connection issues plus dropping service.
efasser said:
Had to call AT&T, especially since they picking RP2. As result:no results, I pretty much don't have LTE, and constant connection issues plus dropping service.
Click to expand...
Click to collapse
Yeah. I have a second SIM card that is for my work phone from AT&T and when I place it into the RP2 the same thing happens.
This might be an issue with the unlocked variant. :/
It's still not a deal breaker hahaha
Same Old Dude said:
Yeah. I have a second SIM card that is for my work phone from AT&T and when I place it into the RP2 the same thing happens.
This might be an issue with the unlocked variant. :/
It's still not a deal breaker hahaha
Click to expand...
Click to collapse
Yep, absence of bloatware , and lightning fast phone beats good data every time ?
You dial *#*#4636#*#* and then you can change the network mode
Warrior1988 said:
You dial *#*#4636*#*# and then you can change the network mode
Click to expand...
Click to collapse
Thanks for the suggestion, however when I enter this sequence on the phone app it just clears itself and does not bring up anything.
I also tried hitting the call button after I type the sequence and an error pops up stating that there is a connection problem and it is an invalid MMI code.
I'll look up online to see what it means and update you all if I find anything.
Same Old Dude said:
Thanks for the suggestion, however when I enter this sequence on the phone app it just clears itself and does not bring up anything.
I also tried hitting the call button after I type the sequence and an error pops up stating that there is a connection problem and it is an invalid MMI code.
I'll look up online to see what it means and update you all if I find anything.
Click to expand...
Click to collapse
It's one of the magic dialer codes thats supposed to work on most Androids I believe. It's a sort of service menu. Razer seems to have disabled most of them in the production builds. *#06# is the only one I've found so far which still works (probably more out of necessity though)
CurtisMJ said:
It's one of the magic dialer codes thats supposed to work on most Androids I believe. It's a sort of service menu. Razer seems to have disabled most of them in the production builds. *#06# is the only one I've found so far which still works (probably more out of necessity though)
Click to expand...
Click to collapse
So I found out there was an error with the code mentioned above.
Enter: *#*#4636#*#*
This will take you to settings to make the changes to SIM card.
Now the question lies, what should be changed to optimize cellular connection?
Edited post actually the dail code is *#*#4636#*#*
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
Same Old Dude said:
So I found out there was an error with the code mentioned above.
Enter: *#*#4636#*#*
This will take you to settings to make the changes to SIM card.
Now the question lies, what should be changed to optimize cellular connection?
Click to expand...
Click to collapse
I have AT&T and mine is TD-SCDMA/CDMA/UMTS
You can play around with it try LTE/UMTS auto prl you might have to turn data on and off for it to take effect.
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
Same Old Dude said:
So I found out there was an error with the code mentioned above.
Enter: *#*#4636#*#*
This will take you to settings to make the changes to SIM card.
Now the question lies, what should be changed to optimize cellular connection?
Click to expand...
Click to collapse
I have AT&T and mine is TD-SCDMA/CDMA/UMTS
You can play around with it try LTE/UMTS auto prl you might have to turn data on and off for it to take effect.
Alright this is what I have done so far and it looks promising!
1. Entered the code *#*#4636#*#* in the stock phone app on the dial
- from here I changed the following setting in the phone information tab
-- Set Preferred Network Type > LTE/TD-SCDMA/UMTS
-- Clicked on the top right corner (3 Dots) > Select Radio Band > United States
2. Now I also went to the AT&T Support site for phones that are not provided by them and they recommend to make some changes on the phone's network settings as well. Here is the Link to the Changes that need to be made...
https://www.att.com/esupport/article.html#!/wireless/KM1218306?gsi=QMyE1Pw
Here is a brief summary of what I have on my end:
- Go to Settings > Network & Internet > Mobile network > Advanced > Access Point Names
-- Here you will want to add an additional access point settings by clicking on the plus sign on the top right
-- The Parameters should be as follows:
--- Name: NXTGENPHONE
--- APN: NXTGENPHONE
--- Proxy: Not Set
--- Port: Not Set
--- Username: Not Set
--- Password: Not Set
--- Server: Not Set
--- MMSC: http://mms.mobile.att.net
--- MMS proxy: proxy.mobile.att.net
--- MMS Port: 80
--- MCC: 310
--- MNC: 410
--- Authentication Type: Not Set
--- APN Type: default,mms,supl,hipri
--- APN Protocol: IPv4
--- APN Roaming Protocol: IPv4
--- APN Enabled
--- Bearer: Unspecified
--- MVNO Type: None
--- MVNO Value: Not Set
--Once all the settings are in place make sure you select the new profile you just created.
As of now, I am able to get LTE+ and in the past 3 to 4 hours my signal has not dropped at all!
I hope this helps you all
What happens here is pretty weird. LTE on band 20 works like a charm. LTE+ is good. LTE on band 3 doesn't work.
It is connected to network, I have good signal and I can easily get the list of connected towers, but I have no data and so I cannot surf the internet.
I tried to edit the build.prop by disabling CDMA and enabling LTE on GSM, I changed the default network. Still, I got no luck.
Anyone experiencing something similar?
Same Old Dude said:
Alright this is what I have done so far and it looks promising!
1. Entered the code *#*#4636#*#* in the stock phone app on the dial
- from here I changed the following setting in the phone information tab
-- Set Preferred Network Type > LTE/TD-SCDMA/UMTS
-- Clicked on the top right corner (3 Dots) > Select Radio Band > United States
2. Now I also went to the AT&T Support site for phones that are not provided by them and they recommend to make some changes on the phone's network settings as well. Here is the Link to the Changes that need to be made...
https://www.att.com/esupport/article.html#!/wireless/KM1218306?gsi=QMyE1Pw
Here is a brief summary of what I have on my end:
- Go to Settings > Network & Internet > Mobile network > Advanced > Access Point Names
-- Here you will want to add an additional access point settings by clicking on the plus sign on the top right
-- The Parameters should be as follows:
--- Name: NXTGENPHONE
--- APN: NXTGENPHONE
--- Proxy: Not Set
--- Port: Not Set
--- Username: Not Set
--- Password: Not Set
--- Server: Not Set
--- MMSC: http://mms.mobile.att.net
--- MMS proxy: proxy.mobile.att.net
--- MMS Port: 80
--- MCC: 310
--- MNC: 410
--- Authentication Type: Not Set
--- APN Type: default,mms,supl,hipri
--- APN Protocol: IPv4
--- APN Roaming Protocol: IPv4
--- APN Enabled
--- Bearer: Unspecified
--- MVNO Type: None
--- MVNO Value: Not Set
--Once all the settings are in place make sure you select the new profile you just created.
As of now, I am able to get LTE+ and in the past 3 to 4 hours my signal has not dropped at all!
I hope this helps you all
Click to expand...
Click to collapse
Were you able to get WIFI calling with this settings?
efasser said:
Were you able to get WIFI calling with this settings?
Click to expand...
Click to collapse
Sorry for the late reply,
I did not. I want to say that the carrier is blocking that feature
Same Old Dude said:
Thanks for the suggestion, however when I enter this sequence on the phone app it just clears itself and does not bring up anything.
I also tried hitting the call button after I type the sequence and an error pops up stating that there is a connection problem and it is an invalid MMI code.
I'll look up online to see what it means and update you all if I find anything.
Click to expand...
Click to collapse
J'ai remarqué des pertes de données périodiques sur le téléphone. J'utilise AT & T.
Same Old Dude said:
Alright this is what I have done so far and it looks promising!
1. Entered the code *#*#4636#*#* in the stock phone app on the dial
- from here I changed the following setting in the phone information tab
-- Set Preferred Network Type > LTE/TD-SCDMA/UMTS
-- Clicked on the top right corner (3 Dots) > Select Radio Band > United States
2. Now I also went to the AT&T Support site for phones that are not provided by them and they recommend to make some changes on the phone's network settings as well. Here is the Link to the Changes that need to be made...
https://www.att.com/esupport/article.html#!/wireless/KM1218306?gsi=QMyE1Pw
Here is a brief summary of what I have on my end:
- Go to Settings > Network & Internet > Mobile network > Advanced > Access Point Names
-- Here you will want to add an additional access point settings by clicking on the plus sign on the top right
-- The Parameters should be as follows:
--- Name: NXTGENPHONE
--- APN: NXTGENPHONE
--- Proxy: Not Set
--- Port: Not Set
--- Username: Not Set
--- Password: Not Set
--- Server: Not Set
--- MMSC: http://mms.mobile.att.net
--- MMS proxy: proxy.mobile.att.net
--- MMS Port: 80
--- MCC: 310
--- MNC: 410
--- Authentication Type: Not Set
--- APN Type: default,mms,supl,hipri
--- APN Protocol: IPv4
--- APN Roaming Protocol: IPv4
--- APN Enabled
--- Bearer: Unspecified
--- MVNO Type: None
--- MVNO Value: Not Set
--Once all the settings are in place make sure you select the new profile you just created.
As of now, I am able to get LTE+ and in the past 3 to 4 hours my signal has not dropped at all!
I hope this helps you all
Click to expand...
Click to collapse
Did you have to select re provision or anything else to make settings be set
darveniza said:
Did you have to select re provision or anything else to make settings be set
Click to expand...
Click to collapse
No. It might take some time for the settings to apply.
I would suggest a reboot after the settings are placed
Hello everyone. So if we are experiencing weak or dropped signals with the Razer Phone 2, what preferred network type should one use that is with Verizon. I already contacted them to change my profile to a CDMA less account so I can receive texts and voice mails.
try (*#800#) it should bring up a warning.. enter.. you'll see a list of ...... choose fist option (logkit) you want to find (function switch) select it.... then you will be able to enable voice over LTE and Wi-Fi calling has other options also..
I hate to be too much of a pain in the rear, what would you do to setup APNs for straight talk? It won't let me even name the APN so it won't let me save it. Let alone add any other information.