[Q] Hardware and software help needed - Captivate Q&A, Help & Troubleshooting

My buddy has a phone which has Andriot 2.1 update 1 plus his power button those not work he is with rogers.
Now, i tried updating the phone to any thing above this, but i am running in to the problem of not be able to set the phone to download mode. I tried every single method with those not require the power button, but with no luck.
i would like to know if there is any other way how to update the phone. Or if there is any other App out there which can switch the power button to the volume button
i found a app which those switch the buttons up but i need a Andriot 2.2 or above with i am currently unable to install
any and all help with this problem would be appreciated and thank you in adv.

Jig
10 char

Have you try battery out/in connect phone to USB and computer press volume up/down... No power bottom good luck....
Sent from my SGH-I897 using XDA

Studacris' reply is probably going to be your quickest method of getting there. You can also take a look at the ideas in the "Captivate Connection Issues" thread - there are some download mode suggestions that don't require buttons.

About the power bottom easy to replace go down and find the power bottom issue... : )
Sent from my SGH-I897 using XDA

Related

[Q] Captivate won't boot.

Hello.
I was playing around with a few different roms for my captivate when something went wrong and now the phone will not boot. I can't get into recovery mode or download mode, either. I've tried the button combinations, thinking that once it gets into download mode I could restore it using Odin. When I turn the phone on, it stays at the at&t screen.
Any help would be appriciated.
Thanks.
List the combinations you are using to get into download. It will help people help you if we know what you have tried
Sent from my SCH-I897 using XDA App
I've used the Down Volume + Power and the Up Volume + Down Volume, then plugging it into usb.
shadowxraptor said:
I've used the Down Volume + Power and the Up Volume + Down Volume, then plugging it into usb.
Click to expand...
Click to collapse
You are removing bat and sim external sd before putting bat back in correct
Sent from my SCH-I897 using XDA App
Try:
1. Remove battery, SIM, microSD (if you have one)
2. Wait at least 10 seconds with the phone off
3. Plug in phone to computer via USB
4. Hold Volume Up/Down, don't let go
5. While holding the volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. Step 2 where you wait for at least 10 seconds seems to be critical (for me at least). If I don't wait for at least that amount of time, it won't work.
And when you've exhausted every other option, you can always try to build/buy a JIG.
I am removing everything from the phone.
norcal einstein, I tried your steps, but it just shows the battery icon with the loading wheel.
What rom where you on last, and what were you flashing to
Sent from my SCH-I897 using XDA App
I was using dillis Darky V.2.0.1.
I was trying to load aospMod Spaceman.
How old is that darky port? Some of the early i900 ports changed the button combos
Sent from my SCH-I897 using XDA App
I don't know how old it is, but this is the link for it:
http://forum.xda-developers.com/showthread.php?t=831542&highlight=darky
shadowxraptor said:
I don't know how old it is, but this is the link for it:
http://forum.xda-developers.com/showthread.php?t=831542&highlight=darky
Click to expand...
Click to collapse
Well the thread died a month ago but the last post links the new thread from the dev. I would explain your sittuation there. the dev is active and hopefully may be able to get you on the right track
Sent from my SCH-I897 using XDA App
Thanks for your help. I posted on the other thread, hopefully someone there can help.

[Q] Help me turn my Captivate off!

So here is the situation:
My power button is non-functional. This happened before, and I was able to press very firmly on the power button to access a shut down menu and turn off the phone. From this, I was able to enter download mode (pressing volume button while inserting USB) and go back to stock, which surprisingly, fixed my power button. I thought this nightmare was over.
Now, my power button has stopped working again (ICS hacksung 5.0). No matter how much pressing, prodding, whatever, I cannot get the power button to turn off the phone.
I cannot find any adb commands to turn off phone.
"adb reboot download" simply restarts the phone, no download mode. (adb does recognize the device)
If I take out the battery, as soon as I put it in the phone boots up.
If I am pressing any of the volume buttons when I put the battery in, I can access recovery mode (But cannot select anything because power button is still broken)
Any ideas? I doubt my phone is still under warranty (1.4 years old) and I do not have mobile insurance.
Thanks for any help in advance
Depending on what recovery u have (cwm or ?), U can use the capacitive buttons, while in that revovery, to navigate and select the power off option.
Sent by XDA Premium App
Thats a neat tip that I didn't know about, but I can't find any option to power off? Sorry for being retarded but I have given this time I promise
cwm recovery is what I have installed atm
Reboot to CWM and Power off option may be at the bottom of the 1st screen that u come to. That is dependent on what version of cwm u have though.
Quick boot from the market, you can place a poweroff button directly on the home screen
Sent from my SAMSUNG-SGH-I897 using xda premium
The ICS ROMS CWM recovery doesn't have power off choice, so he can't do that.
Sent from my SGH-I897 using xda premium
Unfortunately the quick boot "power off" option simply froze my phone, or restarted it.
I let my battery drain so that I could get a dead phone (that part worked), but when I hold my volume buttons and plug in the USB for download mode it goes to the "battery" screen or (if both are held down) recovery. No download mode.
In recovery "key test" the power button fails to register any key press, but it is not spamming either. This seems like a hardware problem, but I am not sure how it was fixed when I flashed back to stock before if that is the case
I will next try making a download mode jig, I'll let you guys know how it goes...
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
its a far shot but odin is now available for use on the phone itself and works on our phones. maybe you can find a kernel thats had the buttons reconfigured. i know darky has one somewhere.
StaticMatt said:
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
Click to expand...
Click to collapse
Thanks for this idea, when I use
#su
#reboot download
the phone simply reboots. Same thing happens in "Quick Boot" 's "Bootloader" reboot option. This phone just seems broke as hell.
Firstly, this power button problem is a lot more common than you would think. It is most often a hardware failure - I mean the button mechanism (springs etc. just dies). Google it to see how common.
Your post suggests a clue: If just putting the battery in reboots the phone, then the power button may be stuck in the "in" position.....so it is always getting "pushed". Then anything you do would mean ht epower button is already being pressed. If this is the case, you will never get a software solution ???
Also, I absolutely do not mean to be nasty. But if you search both Q&A and General sections there are previous threads with this button problem. Many other solutions have been posted and it will be difficult to list them together.
Finally, you can actually replace - yes, replace - the button yourself. Google/you tube has it.
http://www.globaldirectparts.com/Samsung-Captivate-i897-Replacement-Repair-Parts-s/6412.htm
http://forum.xda-developers.com/showthread.php?t=1206459
Hope this helps !

[Q]Help with brick

hi i have been very stupid and installed a optimus 2x rom on my LG Thrill 4G, i have tried putting it in download mode and all kinds of thing and the hole phone will not turn on. Is there another way to put a new rom on of fix it before i send it in? P.S. when i try to put it in download mode or what ever all it does is connect and disconnect, connect then disconnect and never ends. I also tried all other combos of buttons and nothin. The screen will also not come on for crap. I did get it taken to AT&T store and the put in a new battery and new charger to try but nothing responds no screen no nothing. I don't even no if the battery is charging. Any help will be appreciated.
When your in download mode and it turns off and on... You have to hold volume up and power to enable download mode. takes 2 to 3 seconds and usually vibrates
Sent from my SAMSUNG-SGH-I777 using xda premium
rdannar said:
When your in download mode and it turns off and on... You have to hold volume up and power to enable download mode. takes 2 to 3 seconds and usually vibrates
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
ok so i hold the volume up only at first then when it does the on off thing is when i start to hold power?
rdannar said:
When your in download mode and it turns off and on... You have to hold volume up and power to enable download mode. takes 2 to 3 seconds and usually vibrates
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
also im using lg flash tool. not sure if im supposed to use that or not but ya i get what you are saying now, but didn't work.
I am in the same boat, but I cant even get it to be recognized on the computer or anything. It does not respond. Wont power on it does not respond to any button configuration. Is there any way to get it to cut back on.
Please search before posting and use clear subject. As a large forum we don't need unnecessary clutter, and you will enjoy much more your device finding the answer by yourself.
Please post only once.
1. Search before posting.
Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news.
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Click to expand...
Click to collapse

[Q] Power Button Not working. Plz help

Okay so my power button just randomly stopped working after some random time. it doesnt work ANYWHERE. to lock my screen, to unlcok my screen, in recovery mode i cant press anything cuase it doesnt WORK. i no its a hardware issue becuase of this. i did google this but found nothing. what can i do to fix it.
i tried a battery pull and putting it back and going to recovery to factory reset but as soon as i put my battery in my phone starts up. i can enter recovery but the power button doesnt work so i cant press anything.
my warranty is over by a long shot ( had it since it released) so cant return it.
any help would be appreciated. all i need is a way to turn my phone on and off nothing about the recovery and stuff. but if you do find someting for it that would be even more amazing.
and has this happened to anyone else, just wondering is all if this is common or rare.
thnx in advance.
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
One approach; you could read up on ways to clean the power button and see if that works. Or send it off to mobiletechvideos.com and he will fix it for a reasonable fee.
laughingT said:
it has happened to many captivates. search 'captivate power button' on xda.
What ROM are you running on your phone?
Answer to that question has a lot to do with your next steps for software workaround.
Click to expand...
Click to collapse
i am running Aocp 5 android 4.2.1
hve been running it for a few weeks now and no problem till now
Okay, start by seeing if you can clean the power button, that may fix it for now. Again, search 'captivate power button' to find some threads about ways to clean it.
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Assuming your power key is stuck on, remove the battery, hold the up and down volume buttons and reinsert the battery to get into recovery. This will allow you to test keys, wipe, and any other function in CWM.
With the phone on and fully booted into JB, go find volume rocker wake in the system setting options and make sure it is active. Hitting the up/down key will wake the screen when it sleeps. Add the sleep/lock toggle to your notification bar menu and you have a way to instantly lock the screen without the power key.
If you still have a bad power button stuck in on position, then you will need to take out the battery to turn it off.
Hope this helps.
laughingT said:
With the ROM you are running, I believe you have a version of CWM that allows to use the Cappy's dedicated menu keys, menu, home, back and search, to navigate and select recovery items.
Click to expand...
Click to collapse
Thnx for the help but Which button does what?
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
THANK YOU!!!!!!
4-2ndtwin said:
Menu = Down. Home = Up. Back arrow = Back. Search = Select.
This is the way it is in KK4 Corn Kernel. Not sure about the recovery in AoCP though... Home may = Select. ??
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
THANK YOU BOTH (4-2ndtwin AND laughingT) SOOOOO MUCH
IF I HAD THE CHANCE I WOULD DONATE TO YOU BUT I CANT CUZ IM ONLY 14
SRY.
No prob. Glad to help.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
No prob. Glad to help.
Click to expand...
Click to collapse
+1
Now to turn off phone?
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
Get a app or widget for it.
Jack Jake said:
I hope im not bothering you or anything but is there a way to turn off the phone. As i said before i cant remove the battery and put it back in because the phone automatically restarts. Is there a way to turn the phone off with out taking out the battery?
thnx again.
Click to expand...
Click to collapse
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
laughingT said:
This is happening because your power button is stuck in the on position. Did you try to clean it as suggested earlier.
BWolf56, I'm not aware of an app or ROM that completely prevents power up on insertion of battery when the power button is stuck on. If there is such an app, I'd like to hear about it. I think maybe the power switch goes to the broadcom power management chip, so I don't understand how the app could work unless the phone never came on at all. SOD symptoms would be the result.
Click to expand...
Click to collapse
Oh that would be impossible, the OS isn't loaded so even less the apps
I was suggesting a app to turn off the phone/lock screen. There are widgets for that in the market.
Jack Jake said:
Okay so my power button just randomly stopped working after some random time.
Click to expand...
Click to collapse
I had a very similar problem with my Epic 4G Touch (Sprint S2) - my phone would randomly reboot, and it kept getting worse and worse. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. Eventually, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the switch you'll need.
(They don't include the skills needed to solder it in place. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron and a steady hand. Do you have a friend who's good at soldering?)
awoolf said:
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Click to expand...
Click to collapse
well thanks for the reply, but i dont need it anymore. my friend conveniently had a GNex (old) and gave it to me as a present. so i dont use my captivate that much anymore.

[Q] Stuck in recovery mode - galaxy s

I am sure that this has been covered before unfortunately I am very technically challenged. Let me briefly explain. My son has a galaxy S, his bottom 4 buttons stopped working, he downloaded an app which somewhat replaced those. He read that you can do a factory reset and it might restore the buttons. Mind you he is 14, in doing so it went into recovery mode. Now it is stuck, we have read many threads and have pressed just about every combination of buttons to try to get it out, I guess ultimately we are trying do get it into a download mode in order to reinstall software, none of which have worked, is there any way to do this without the home button, sorry if this has been rehashed many times.
stuck in where? n what button cant be use? is it bootloop?n sgs got 2 hardkey n 2 softkey + 2 vol button, so which one?
n u can do jig if hardkey broke
Sent from my GT-I9000 using xda premium
Ok, I have made a mistake, I looked at his brothers phone and the model is actually model sch-I500, the buttons that are not responding are the buttons across the bottom, the home, back, search and settings. The phone is currently stuck in the manual recovery mode. I can toggle up and down but am not able to select anything due to the home button not working. I have downloaded the ADB program and was able to see his brothers phone. I am still not able to see the phone that is stuck. So I know the drivers are ok. I have read that the usb debugging has to be enabled. Frankly I have no idea if it is, it does come up on the computer as a cd drive but not accessible. I do not know what a jig is. Thanks.
jwhite0514 said:
not able to select anything due to the home button not working. .
Click to expand...
Click to collapse
use power button to execute or select.

Categories

Resources