Related
HI TO ALL FRIENDS
I SUDDENLY ENCOUNTERED A PROBLEM: usb not recognized ..... .
what i did:
1-uninstalled kies and installed again
2- installed driver again
3-tried on other PC
4-re installed windows seven on laptop
5-changed cable
6-formatted my sgs 2 times
7-usb debugging and other types of connection does not work.
8- 2 days ago my sgs dropped down from 1 meter high.
9- it works great by itself but no usb connection available
10 during this week i tried about 10 pages of apps , and it has been sluggish, and finally this problem of usb made me to format it to factory reset.
NOT ALL DONE ABOVE WORKED
PLEASE HELP ME
Well, it is possible that the USB connector in your phone was damaged when it fell.
But first of all: As far as I know, you do need the original Samsung cable which came with the phone to connect to Kies. So, if you can still use the mass storage capability, but not use Kies, this could be your problem. Otherwise it's more likely to be the connector.
THERE IS VISIBLE NODAMAGE . I PERSONALLY THINK THAT PART OF OS THAT CONTROLS EXTERNAL CONECTION HAS IMPAIRED AND MUST BE REPAIRED . BUT HOW? IS THERE ANY WAY Of flashing android device without need to odin and pc?
I don't think that the software could have taken damage by the fall. And if there is any way to flash the phone without USB connection, you would need to take apart the phone and use special hardware - maybe you should just RMA it. Contact Samsung support and see what they have to say.
hi dear friend
i didnot mean RMA
and i think or i feel if there were any way to install a fresh ROM on sgs with 3 botton assistance, not with odin software, thats why pc can not recognizr my phone. so i think newand fresh rom can do better.
i mean copying a rom file on sd card and through recovery mode applying update zip
I AM REALLY COFUSED
http://forum.xda-developers.com/showthread.php?p=13203799
[FIX] Usb mounting Internal and External SD
Sent from my GT-I9000 using XDA App
@raminazad: If you really want to update your ROM first, you will have to wait. A "custom recovery" is needed for this (as a cable connection is not possible for you), and there does not exist one, yet for the i9003. Maybe in some weeks... look in this thread:
http://forum.xda-developers.com/showthread.php?t=1120301
raminazad said:
HI TO ALL FRIENDS
I SUDDENLY ENCOUNTERED A PROBLEM: usb not recognized ..... .
what i did:
1-uninstalled kies and installed again
2- installed driver again
3-tried on other PC
4-re installed windows seven on laptop
5-changed cable
6-formatted my sgs 2 times
7-usb debugging and other types of connection does not work.
8- 2 days ago my sgs dropped down from 1 meter high.
9- it works great by itself but no usb connection available
10 during this week i tried about 10 pages of apps , and it has been sluggish, and finally this problem of usb made me to format it to factory reset.
NOT ALL DONE ABOVE WORKED
PLEASE HELP ME
Click to expand...
Click to collapse
If you really triad all above and none working, I think you should take your phone to samsung repair service.
Hi,
I currently encounter a problem with my Optimus 2X.
I can use my usb port to load the phone but when I plug it in a computer (I tried with several computers running XP / seven / ubuntu ... and several cables). But my phone doesn't seems to be recognized by the computers.
I'm running 2.6.32.45 cyanogenmod. I wanted to go back to the original rom but my backup seems corrupted
Does anywone knows how I can go back to the original rom ? (hopping it will fix my usb issue ....)
regards.
Uninstall the old drivers, and download v3.6 from lg's site it has fixed this issue. =P
Sent from my LG-P990
Even if the coputer act like there is nothing plugged ? On several computer I used the phone wasen't recognized as a plugged peripheral (even a usb key).
I had the same problem, v3.5 of lg united driver was cqusing it , when I updated it got fixed just uninstall reboot and install 3.6 worked for a few more peps
Sent from my LG-P990
Thank's a lot it works perfectly !
I now encounter a new problem, when I try to update my phone using the LG software, it stops at about 30% (looks like it's impossible to connect the phone with the software).
Edit -> I've found an old stock rom and installed it on my phone : everything works perfectly thanks a lot !!!
Guys
I'm running CM Nightlies and I can no longer connect my phone to any pc via USB.
Some have said I would have to flash phone back to an original rom in order to fix then flash CM back over it?
Is this really only way as worried will lose all my internal drive stuff.
You can try to change your drivers it works very well !
If you wan to save your stuff without using USB you can use FTP thrue à WIFI to send stuff on your PC.
I got the same problem since about 4 months. When connecting the phone to the computer, no usb icon appears on the notification bar, also there is nothing happening in the device manager on the computer. Charging always works.
This is still confirmed after using different computers, different usb cables, different usb ports, and 4 different versions of the drivers (up to the most recent 3.6 drivers) even it should still show something even with no drivers. This also occurs in "software update" mode.
Also I tried different ways of plugging in the cable on the phone side (slow, fast, with pressure up/down/side).
This is with CM7, CM9alpha, and just for test also with MIUI.
The odd thing is, in this time span, it randomly worked about 4 times in these 4 months. Last time was just after I updated to CM9 alpha it worked the first time I plugged it in (was surprised with that), but it stopped working too.
For me it seems it's something with the usb chip set in the phone.
The problem here is, returning the phone for RMA will cause problems with CM on the phone, as they probably will say it's because of a custom rom, and there is no (easy) way to get stock rom with branding back on the phone (the only one maybe with a nandroid backup of stock from someone else?).
I'm having the same trouble as dedors. Absolutely no USB data connection. Can't get anything going in nvflash, smart flash, recovery, or when running normally. I've tried uninstall and reinstall the drivers, multiple cables, multiple computers, multiple OS including win7 xp and Ubuntu. USB debugging enabled, disabled, wiping the SD cards, trying with no external sd card. The only glimmer I've seen of it working was when I plugged it into my old XP laptop before and it prompted the computer to install a driver for the webcam that I'd mistakenly uninstalled. I tried cleaning out the USB port in case it had a bunch of lint stuck in it and the cable just wasn't sitting properly.
I don't know at what point it stopped working but it has had no serious abuse that could cause any physical damage.
Oddly it still charges just fine.
Can't return for RMA as it's running Cyanogen 9 and I've no easy way to get it back to stock. I also had this problem on Cyanogen 7. I could probably flash a stock rom onto the phone but I wouldn't be able to nvflash the original recovery.
A lot of people seem to have had USB trouble with this phone.
Happy to provide any logs that may help the diagnosis though you may have to explain how I can acquire them as I only know basic flashing.
Sorry for the lengthy first post, trying to be thorough.
Thanks in advance for any help offered.
I can't think of any solution to your problem (in my opinion it seems like a faulty USB port, it seems to be "popular"), but I can suggest you a workaround... it's actually the workaround I've been using cuz I also have trouble with USB... get an SD card and a USB to SD card adapter...
Or that ftp/wireless trick that was mentioned above, I actually don't know how to do this but I would definitely like to
Yeah that does seem to be the case. At least I can still flash roms and so on. So long as it lasts me the rest of the year I don't mind grabbing a new one then.
Anyone who knows about logs for trouble shooting, can you suggest a way that I might try to diagnose the problem. If I can be sure the port is stuffed and nothing I can do will fix it I'm ok with that but I'd like to know whether I should keep looking for solutions or give up on it.
Cheers.
Hello,
I've got a new issue with my phone updating CM10 and today it's impossible to boot.
I've tried to plug it on my computer in order to flash it but got the same probleme as the first post : nothing happened when plugged on my computers.
Does anyone got this 3.6 drivers somewhere ? seems that the new ones from LG didn't works ....
I have the same problem
I how bought my phone (LG P990), 6 months old, used. I come home and try to connect it to the computer and it won't be recognized. Somehow I manage over that code 1809 # * 990 # to enter the menu and play with the ports I was able to connect to the computer and do the official update to 2.3.4. over LG software.Once again, this comp will not recognize phone (only charging), but using code 1809 # * 990 # and tampering on port settings it was able to connect to the computer.
Now after some time do stupidity and Root my mobile phone(SuperOneClick) and install clockwork-5.0.0.3 and via zip CyanogenMod 9. I tried all the ways that exist but pc does not recognize the phone anymore. After some time, the official ICS update is coming, and now that you can not connect the comp how to update mobile phone. I do a recovery back to the official Android 2.3.4 (I had to change the partitions, 2.3.4 and ICS use different sized partitions) and I run a mobile phone that is again official 2.3.4 and try entering the menu (1809 # * 990 #) by tampering with ports settings I tried to make comp to recognize the phone but to no avail. I tried to change the usb cable, use a different USB port on comp but nothing, no response just recharging.
After googling I managed to find recovery from ICS V28g and I managed to install it to have a functional phone. I contacted 2 service both refused to accept phone because rooted. I tried all the tricks without battery holding vol + and - to enter into APX mode, nothing then Power and vol - S / W mode that worked but comp ga would not recognize until now even that does not work (appears LG logo and when S / W should appear then goes off) and all the other tricks that I found on the internet, reinstall the drivers, I do not know what else.
Oh yeah and I noticed entering the settings on mobu System Settings / About Phone / Software Information / Baseband version - unknown
Link to image-->h_t_t_p://s1.postimage.org/9317bfezz/2013_01_11_12_36_01.jpg
Hi,
I've found an old 3.6 driver, but nothing works even with it ... I think I must change my phone -_-
Hi all,
I'm new to the forums, but have been browsing anonymously for about 1 1/2 weeks, before my xperia x8 arrived, hehe. Yes Im a total noob, am not affraid to learn though.
Unfortunately, when the phone arrived, it came with a Nokia CA-101 data cable and a no-name headset(have to press/hold the button on the wire to hear music loud and clear)
I can browse the memory stick and PC Companion 2.0 works with the nokia cable.
My question and concern is: can I root my phone and start unlocking it WITH THAT NOKIA CA-101 CABLE - to update android to 2.3.x(example GingerDX) ?
So far havent done anything to it, except playing arround in service menu and transfering media files into the 16gb sd card.
Phone details:
Sony Ericsson E15i
IC: 4170B-A3880091 BX9 11W20
OS: Android 2.1-update1
If need more details or pictures, just ask, I will provide.
Thank you in advance
EDIT: its not simlocked, but after official logo, it displays UK Provider Three logo(black tribaal '3' on white background)
¹st welcome to the club dude
²nd It's ok to use the cable, its the same
And to unlock the boot loader please follow the instruction below and u won't brick ur phone it may help if it is your first time :
http://forum.xda-developers.com/showthread.php?t=1436924
Sent from my E15i using xda premium
Press thanks if I helped
thanks for the welcome mate, after playing with it for about 2-3 days, its already boring, because I dont have wlan here yet, im gonna buy one AP hopefully today. I havent found any other way to connect it to internet.
I've tried to identify is via S1 Tool(on USB#1), powered-off and back button pressed, but it keeps searching, doesnt find it. any thoughts? I thought it was because of data cable.
edit: no drivers for SEMC USB Flash, windows 7 x86, cant post link to driver yet
edit2:
hmm,
SETOOL2 SIMLOCK CERTIFICATE
Elapsed:14 secs.
it seems its already UNLOCKED
EDIT3: GingerDX v022 Installed
Wow <-- !!!
kudos to doixanh
x8 update
I see no point (yet) in creating a new post, so I will continue in here.
I'll post my progress, maybe it will help someone else also
here's what I've done:
played arround with it for a couple days, got BORED!!! with android 2.1 and no root, no wlan.
phone details: Sony Ericsson E15i black ... 11W20, OS: 2.1-update1, version 2.1.1.A.0.6, baseband M76XX-TSNCJOLYM-53404015
- installed Gordon's Gate(needed drivers for X8)
- launched S1 Tool-> found out it was already unlocked with SETOOL2
- rooted with SuperOneClick
- x8toolbox-beta.4 - root 2.1(for rootexplorer.apk), clockworkmod & xrecovery, dual mode recovery - followed this youtube tutorial "UPDATE sonyericson w8 2.1 to 2.3.7 . v21,v22,v23 (GU V1)"
- downloaded "GingerDX-v022-update.zip" and copied to sd card root folder
- switched phone OFF, waited 1 minute(tip: take the sd card off), switched phone ON with back button pressed untill recovery menu loaded, did Factory Reset then selected Install Custom Zip from sd card and watched install progress, rebooted in GingerDX v022
- card was 'corrupted' so I formated it(I didnt care about the contents, new phone)
So far its running great, Im more than happy with it, but, as I kept reading the forums, I noticed some bugs:
1. when I rotate phone showing all apps icons, icons pile up on top of each other in top left corner
2. when I plug the data cable, and 'Turn On USB Storage', the sd card is unusable by phone 'Sorry, your SD card is busy'. Is this normal ?
3. before the update to GingerDX, I had installed dual touch from x8toolbox-beta.4 in Eclair, can I safely install it in GingerDX ?
4. battery drains a bit too fast, any help on how to improve/minimize battery waste ? I've deactivated the light sensor(was annoying) in menu and set display brightness to minimum(and still looks amazing)
Also, if you have any tips, please tell me - Im a NOOB eager to learn and want to use the full potential on my new toy, I mean phone.
Thanks for reading
I use that same cable. Same as the original X8 usb cable.
No problem at all ...u can use it!!
SONY ERICSSON XPERIA X8
ACHOTJAN SEMC DEBRAND ENGINE V1.0 FINAL
bootloader unlocked ;-)
nAa -11 kernel
both of you read just my first post?
I know the cable works.
Hello, XDA community,
Since I couldn't find a thread here discussing this problem, I'm starting one now.
Everytime I start up my phone or whenever it runs out of RAM and tries restarting background services/apps, the "First Time Start" application reappears in the taskbar (it actually is com.sonyericsson.startupflagservice) and then the screen opens up the "Check Fail" screen (image attached). Tried looking at ADB logcat at boot, nothing useful (will try again soon). This problem began occuring since Jan 22, when I first started my phone. The phone is not rooted nor messed with (bootloader still locked). Contacted Sony for that, they suggested the obvious and costly solution, to bring it to them so they could examine and fix it, but is there a manual fix? I want to know exactly what is causing the problem and be able to fix it for myself only, since this phone isn't that popular where I live. I have nothing against Sony fixing it, but most probably they won't even explain what caused it (and it happens for me to be a curious person). The phone is bought at RDE.lt , which is a general tech shop, not a phone vendor, and thus no warranty is given.
To be honest, I would fix this by reflashing the phone, either reflash the current firmware (Country and provider the exact same as before)
Or flash a new firmware which is not buggy. It is known that firmwares are not the same as some of them are buggy mess.
Kizoky said:
To be honest, I would fix this by reflashing the phone, either reflash the current firmware (Country and provider the exact same as before)
Or flash a new firmware which is not buggy. It is known that firmwares are not the same as some of them are buggy mess.
Click to expand...
Click to collapse
Tried reflashing through Sony PC Companion, no go. If I try FTF flasher, is unlocked bootloader a must? I have flashed ROMs before on Huawei u8160, Sony Xperia X10 mini e10i and Xperia Go st27i, but most of them were custom, so I'm unsure if I have to unlock it now.
Paul!us said:
Tried reflashing through Sony PC Companion, no go. If I try FTF flasher, is unlocked bootloader a must? I have flashed ROMs before on Huawei u8160, Sony Xperia X10 mini e10i and Xperia Go st27i, but most of them were custom, so I'm unsure if I have to unlock it now.
Click to expand...
Click to collapse
Download a firmware from XperiFirm
And flash it with Flashtool
It does not require an unlocked bootloader as it is not a custom ROM
Solution
Hey guys. I got the same problem on 20.1.A.2.13, tried to flash the 20.1.A.2.19 twice, tried factory reset but nothing happened, after starting the phone I always got the Check fail message. The problem is caused by the Startup Flag Service 2 (com.sonyericsson.startupflagservice), but I got a solution for the problem. Because it always shows up after the systemboot, we simply just have to prevent it from running at startup.
I used SD Maid (Pro or simple version doesn't matter). Go to App Control, than type in the search box: "startup", tap on it. Tap on Toggle Autostart Components. After that switch the On to Off and reboot the phone. Thats all
Hello, im having the same error. I have installed sd maid. I have searched startup and clicked on it however there is no toggle autostart components option.
Karnivaldoll said:
Hello, im having the same error. I have installed sd maid. I have searched startup and clicked on it however there is no toggle autostart components option.
Click to expand...
Click to collapse
Look again, but if it isnt there try SD Maid Pro.
Zsenyka said:
Look again, but if it isnt there try SD Maid Pro.
Click to expand...
Click to collapse
i had installed sd maid pro,but not find anything on "startup"
I have same problem, CHECK FAIL CHECK FAIL whatever I do (Flashtool or pc companion).. Phone works for 2-3 days and crash...
Right now Im testing custom rom...if phone stay alive for next 5 days I will share links tips and rest of it..
i used cwm to wipe my phone but i did not flash it with rom instead i rebooted the phone & now it's stock on the Sony logo. please help this is not even my phone
i did try to use flashtool to flash stock tft but unknown sources & debugging must be enabled but the phone is stuck on the Sony logo so i can't even enable these settings. please if you can help then do,thanks very much
the phone's boot loader is locked by O2 & i had lollipop for LBL installed but it was getting very laggy so i tried to install another rom when i then messed up everything !!
1.Flashtool needs USB Debugging for Rooting ur Device, not Flashing
So don't worry about it, go for flashing
2.In Case u Wipe Entire Phone I.e.System, Data, Cache then the Phone won't skip the Boot Logo
According to me, the Recovery should b Accessible, So flash any ROM present in the Storage (if its urgent for u to have the phone working)
OR
Use Flashtool, it will help you recovering ur Phone
Go for the Flash tool method, read the Procedure Carefully
Good Luck
Sent from my Xperia SP using Tapatalk
i managed to do it ,windows 10 64bit did not work so i booted to 2nd partition with win 7 32bit this also gave me lots of trouble for 2 hours but closing the flashtool app & disconnecting the phone few times & just as i was about to give up it's started to flash stock jellybean 4.1.2 & now the phone is working & currently the sony Companion app is updating it i think to 4.3 jelly bean. i will not mess no more with this phone,lollipop for LBL is a no go & because O2 locked the bootloader i will just keep it the way it is & just customise it with smart launcher & lock screen. thanks very much for your comment as it would have made me not give up & try again tomorrow. i appreciate it
agantai said:
i managed to do it ,windows 10 64bit did not work so i booted to 2nd partition with win 7 32bit this also gave me lots of trouble for 2 hours but closing the flashtool app & disconnecting the phone few times & just as i was about to give up it's started to flash stock jellybean 4.1.2 & now the phone is working & currently the sony Companion app is updating it i think to 4.3 jelly bean. i will not mess no more with this phone,lollipop for LBL is a no go & because O2 locked the bootloader i will just keep it the way it is & just customise it with smart launcher & lock screen. thanks very much for your comment as it would have made me not give up & try again tomorrow. i appreciate it
Click to expand...
Click to collapse
I assume that you have tried the RR (5.0.2) LBL Bug-Fixed by Skulltus, if not then give it a try since LBL Users are finding it somewhat stable...
Reasons why Phone wasn't getting detected can be:-
>Improper Downloading of File - Make sure you don't Pause and Resume the Downloads too many times, so that it becomes corrupt
>Wire-- Use a Sony USB Cable only or a Good one ( i use Samsung's Cable for the Timebeing) -- Improper wires can be a reason why the Phone can't get detected by The PC...
>Try Another USB Port to Connect the Phone if it doesn't get detected by one...
These things happened with me Many times, Just Sharing it
Happy Flashing :good:
Arvind7352 said:
I assume that you have tried the RR (5.0.2) LBL Bug-Fixed by Skulltus, if not then give it a try since LBL Users are finding it somewhat stable...
Reasons why Phone wasn't getting detected can be:-
>Improper Downloading of File - Make sure you don't Pause and Resume the Downloads too many times, so that it becomes corrupt
>Wire-- Use a Sony USB Cable only or a Good one ( i use Samsung's Cable for the Timebeing) -- Improper wires can be a reason why the Phone can't get detected by The PC...
>Try Another USB Port to Connect the Phone if it doesn't get detected by one...
These things happened with me Many times, Just Sharing it
Happy Flashing :good:
Click to expand...
Click to collapse
i have installed skultus bugfree 5.0.2 last night & it kept throwing a constant error (system UI crashed) i wasn't able to use the phone because this error when i hit ok it will comeback instantly so i thought it's not compatible,maybe i got the error because installation says ((1. Make you sure your device is LBL with .207 stock kernel, )) but my stock kernel is not 207 the firmware version ends with 205 , i have tried the sony companion to update but it said latest firmware is already installed. what do you think about this ?
agantai said:
i have installed skultus bugfree 5.0.2 last night & it kept throwing a constant error (system UI crashed) i wasn't able to use the phone because this error when i hit ok it will comeback instantly so i thought it's not compatible,maybe i got the error because installation says ((1. Make you sure your device is LBL with .207 stock kernel, )) but my stock kernel is not 207 the firmware version ends with 205 , i have tried the sony companion to update but it said latest firmware is already installed. what do you think about this ?
Click to expand...
Click to collapse
Go Back to .207 (By Flashtool) and then Re-Flash the ROM...
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
Go Back to .207 (By Flashtool) and then Re-Flash the ROM...
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
where can i find .207 for locked bootloader O2 xperia sp ?
also is it a firmware upgrade or downgrade ? since i have .205 & .207 is higher !! sorry for the noob questions
agantai said:
where can i find .207 for locked bootloader O2 xperia sp ?
also is it a firmware upgrade or downgrade ? since i have .205 & .207 is higher !! sorry for the noob questions
Click to expand...
Click to collapse
IF
U want to Use the ROM then Download any .207 ROM, Flash it. I suggest you to download the AU(Australia ( .207 Build
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
IF
U want to Use the ROM then Download any .207 ROM, Flash it. I suggest you to download the AU(Australia ( .207 Build
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
i already have this AU file ( C5303_12.1.A.1.207_AU )
do you know where i can get the recoveries for it & which version of UPDATE-SuperSU i need ? i have both v1.94 & v2.46
agantai said:
i already have this AU file ( C5303_12.1.A.1.207_AU )
do you know where i can get the recoveries for it & which version of UPDATE-SuperSU i need ? i have both v1.94 & v2.46
Click to expand...
Click to collapse
Looks like you are new to All these stuff
Just Explore the Device forum
Search for XZDualRecovery by NUT in Xperia SP Android Development Thread
I'll give the Links in few minutes
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
Looks like you are new to All these stuff
Just Explore the Device forum
Search for XZDualRecovery by NUT in Xperia SP Android Development Thread
I'll give the Links in few minutes
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
thanks i really appreciate it & i look forward to those links. :good:
i know about rooting & flashing roms in zip format via recovery but yes i'm new to installing roms & kernels via the flashtool & not a big fan of it either.
Hey, I'm in pretty much the same situation here, except I am having a few problems which are keeping me from going back to the stock firmware.
1) The phone keeps restarting when it's in flashmode - meaning it's sitting there for 30 seconds or so with flashmode and the green light, and then disconnects and turns back on into flashmode. This is keeping me from being able to flash anything because the device disconnects through the process.
(Yes, I did try reinstalling the programs, updating drivers, restarting computer, using a different usb port/cable etc)
2) I did manage to make it stay connected somehow last night BUT flashtool would give me errors involving .sin's of some kind. I could get past all this by flashing the stock firmware using "repair my phone/tablet" in Sony PC Companion, which I have done twice before so I can confirm it works - but for some bizarre reason the software started saying that there is no firmware available for my device!
Please help!
2->If you have already flashed A Firmware via Flashtool and u want to perform another,
then you have to RESTART it (the App) Otherwise it will show
Unable to Flash "System.sin" as you said
1-->I guess Flash Mode has A Time limit to get connected with the PC, if not then definitely its the wire Problem...Wires should be in good condition
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
2->If you have already flashed A Firmware via Flashtool and u want to perform another,
then you have to RESTART it (the App) Otherwise it will show
Unable to Flash "System.sin" as you said
1-->I guess Flash Mode has A Time limit to get connected with the PC, if not then definitely its the wire Problem...Wires should be in good condition
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
i have just finished installing the bugfree 5.0.2 rom from HERE ,hopefully everything works better & no more slow downs like this rom HERE
Arvind7352 said:
2->If you have already flashed A Firmware via Flashtool and u want to perform another,
then you have to RESTART it (the App) Otherwise it will show
Unable to Flash "System.sin" as you said
1-->I guess Flash Mode has A Time limit to get connected with the PC, if not then definitely its the wire Problem...Wires should be in good condition
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
ok i have big issue with this so called bugfree rom, i don't know how is this happening & i hope you will have an idea, when i install apps & games on the phone & then i reboot the phone for what ever reason half the apps & games will vanish from the phone !!! i also noticed that those games that vanished from the phone are installed on the SD card & the funny thing is when i look at the storage the SD card memory it remains the same size even after i have installed those games & apps on it !! for example i have 2.54gb of sd space remaining out of the 4gb card & when i finish installing the games & apps it remains 2.54gb & i can play the games it's only when i reboot the phone they no longer on the phone. what is happening here ?
agantai said:
ok i have big issue with this so called bugfree rom, i don't know how is this happening & i hope you will have an idea, when i install apps & games on the phone & then i reboot the phone for what ever reason half the apps & games will vanish from the phone !!! i also noticed that those games that vanished from the phone are installed on the SD card & the funny thing is when i look at the storage the SD card memory it remains the same size even after i have installed those games & apps on it !! for example i have 2.54gb of sd space remaining out of the 4gb card & when i finish installing the games & apps it remains 2.54gb & i can play the games it's only when i reboot the phone they no longer on the phone. what is happening here ?
Click to expand...
Click to collapse
I didn't try the LBL ROM since I Unlocked the Bootloader but still,
In All ROMs when I install an app from the SD Card, they get vanished on rebooting.... It reads the SD Card and the App Appears
I guess there's a "Move to Phone" Option in it, try doing that for those apps installed in SD Card
There should be an Option of-
"Preferred Install Location" either in
--Settings->Apps(Select the Menu)>Preferred Install Location
OR
--Settings->Storage->Preferred Install Location
Default Option can be "Let the System Decide"
Change it to Internal Storage
Tapatalked from my XSP™
Arvind7352 said:
I didn't try the LBL ROM since I Unlocked the Bootloader but still,
In All ROMs when I install an app from the SD Card, they get vanished on rebooting.... It reads the SD Card and the App Appears
I guess there's a "Move to Phone" Option in it, try doing that for those apps installed in SD Card
There should be an Option of-
"Preferred Install Location" either in
--Settings->Apps(Select the Menu)>Preferred Install Location
OR
--Settings->Storage->Preferred Install Location
Default Option can be "Let the System Decide"
Change it to Internal Storage
Tapatalked from my XSP™
Click to expand...
Click to collapse
ok but this means all apps will be installed to the internal memory & one of the reasons why i wanted lollipop is the ability to install some apps to SD . i just need to fix this write to SD issue & i will be good to go.
agantai said:
ok but this means all apps will be installed to the internal memory & one of the reasons why i wanted lollipop is the ability to install some apps to SD . i just need to fix this write to SD issue & i will be good to go.
Click to expand...
Click to collapse
Oh Yeah....
I guess App2SD Implementation is not working properly in 5.0.2 so you are facing the problem
Tapatalked from my XSP™
Arvind7352 said:
Oh Yeah....
I guess App2SD Implementation is not working properly in 5.0.2 so you are facing the problem
Tapatalked from my XSP™
Click to expand...
Click to collapse
do you mean i wont be able to use the SD to install apps !! i have installed an app to the internal memory & when i moved it to the SD card the settings says it's moved correctly but the SD card memory size still unchanged which means it didn't move correctly & if i try to start the app the phone will freeze & if i restart the phone the app will disappear !!
agantai said:
do you mean i wont be able to use the SD to install apps !! i have installed an app to the internal memory & when i moved it to the SD card the settings says it's moved correctly but the SD card memory size still unchanged which means it didn't move correctly & if i try to start the app the phone will freeze & if i restart the phone the app will disappear !!
Click to expand...
Click to collapse
That's what I meant in the last post.....
Its not working
Tapatalked from my XSP™