I have an ATT Captivate that goes into a fuzzy screen after it goes from the initial White ATT World Phone screen. The wrong kernel was flashed on it after I mistakenly read a post trying to upgrade the the Apex rom. If anyone could be of any assistance. I can't get into Download Mode or Recovery mode... but it still turns on. I'll post screenshots if possible.
rodashtoc said:
I have an ATT Captivate that goes into a fuzzy screen after it goes from the initial White ATT World Phone screen. The wrong kernel was flashed on it after I mistakenly read a post trying to upgrade the the Apex rom. If anyone could be of any assistance. I can't get into Download Mode or Recovery mode... but it still turns on. I'll post screenshots if possible.
Click to expand...
Click to collapse
Ouch, so no download mode or recovery mode? Have you tried booting into download from ADB? if you don't know what adb is then don't worry about it. You might try seeing KIES recognizes it, if not, download any ODIN package and see if the ODIN recognizes it, if it does you're in luck! If not, then you might consider ADB: I'm no expert but I'm sure that when you have ADB there is a way to replace the Kernel Image for a proper one. Just out of curiosity, which kernel did you accidentally flash?
It has nothing to do with kernels, you have a GB ROM with Eclair/Froyo Bootloaders
Sent from my SGH-I897 using xda premium
download mode still works even if it doesnt look like it.. er.. wait download mode should still work. scratch that it WILL still work. flash gingerbread bootloaders
Well
TRusselo said:
download mode still works even if it doesnt look like it.. er.. wait download mode should still work. scratch that it WILL still work. flash gingerbread bootloaders
Click to expand...
Click to collapse
The second problem is... it loops after the fuzzy screen. It only stays for 5-10 seconds then goes back to the ATT screen.
I do know what adb is and I've used it a lot especially with my girl's Mytouch 4g. It's just this was a big problem I haven't been able to crack.
I believe the kernel that was flashed was TalonDEV 0.5.1-RC1 from http://forum.xda-developers.com/showpost.php?p=18330648&postcount=5215
Edit: Odin sees it for the 5-10 seconds it's on... but since it's bootlooping... Odin doesn't have time to do anything further than file analysis.
2nd Edit: The battery status comes up when I plug the phone up when it's off... I know that probably doesn't help, but I figure I should give all the information I can.
b-eock said:
It has nothing to do with kernels, you have a GB ROM with Eclair/Froyo Bootloaders
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Its the KERNEL.
If you have froyo bootloaders and a gingerbread ROM, it will still boot into the ROM and work. But on boot, the KERNEL splash screen is that distorted image in the OP, and also recovery is inaccessible because all you get is the distorted image. And as you should know, recovery is contained in the kernel.
If you're on froyo, and flash a gingerbread kernel, not only will you have the issues stated above, but you'll also likely be bootlooping, which is exactly the situation in the op.
OP.. You don't use Odin booted into Android, or in a bootloop. Its used in DOWNLOAD MODE ONLY.
Search for "usb download mode jig" you can make one, our buy one fur under 10 bucks. It'll boot it into dl mode in seconds.
Then go to the top of the development section, find a gingerbread package WITH bootloaders. flash that, THEN proceed with your original plan
Yes or flash gingerbread boot loaders and get recovery back, Then flash and appropriate kernel in cwm.
Hint: there is a button combination that you must preform to enable download mode it is posted several thousand times in the captivate section I would suggest go and find what it is.
Btw. The button combination happens to be posted in three or four of the stickies. And the forum rules say to read stickies before creating a thread or posting.
Listen
TRusselo said:
Yes or flash gingerbread boot loaders and get recovery back, Then flash and appropriate kernel in cwm.
Hint: there is a button combination that you must preform to enable download mode it is posted several thousand times in the captivate section I would suggest go and find what it is.
Btw. The button combination happens to be posted in three or four of the stickies. And the forum rules say to read stickies before creating a thread or posting.
Click to expand...
Click to collapse
I've read them already. I told you I can't get into either mode. I know exactly what the 3 button combination and the download combination is for this phone and since the wrong kernel was flashed on it, it's apparently not working.
Hint: being helpful is great, but when you start talking down to people, you start to become an ass. When that starts to happen, it's best you be quiet and let people who want to come up with a solution to the problem speak.
Thanks.
rodashtoc said:
I've read them already. I told you I can't get into either mode. I know exactly what the 3 button combination and the download combination is for this phone and since the wrong kernel was flashed on it, it's apparently not working.
Hint: being helpful is great, but when you start talking down to people, you start to become an ass. When that starts to happen, it's best you be quiet and let people who want to come up with a solution to the problem speak.
Thanks.
Click to expand...
Click to collapse
You need to get a jig then
Sent from my CM9 ICS i897 Captivate
Thanks
studacris said:
Its the KERNEL.
If you have froyo bootloaders and a gingerbread ROM, it will still boot into the ROM and work. But on boot, the KERNEL splash screen is that distorted image in the OP, and also recovery is inaccessible because all you get is the distorted image. And as you should know, recovery is contained in the kernel.
If you're on froyo, and flash a gingerbread kernel, not only will you have the issues stated above, but you'll also likely be bootlooping, which is exactly the situation in the op.
OP.. You don't use Odin booted into Android, or in a bootloop. Its used in DOWNLOAD MODE ONLY.
Search for "usb download mode jig" you can make one, our buy one fur under 10 bucks. It'll boot it into dl mode in seconds.
Then go to the top of the development section, find a gingerbread package WITH bootloaders. flash that, THEN proceed with your original plan
Click to expand...
Click to collapse
I'll order a jig and see if that gets me into download mode. Thanks for the explanation. I'll update this once I get some results.
Gotcha
korockinout13 said:
You need to get a jig then
Sent from my CM9 ICS i897 Captivate
Click to expand...
Click to collapse
I'm on it. Preciate it.
Fixed!
Got the jig, flashed the right kernel back on, game, set, match... 8 bucks well spent. Thanks everyone.
In future reference, you can force the phone into download mode from adb.
Using Doc's Master ROM v7: Cappy edition
KangKilla said:
In future reference, you can force the phone into download mode from adb.
Using Doc's Master ROM v7: Cappy edition
Click to expand...
Click to collapse
if the phone is in a state that accepts adb coms
Related
Hi, I have a SS/ATT Galaxy S. It was working fine. I made the mistake of running an update to change the ATT splash screen. The device boots to the ATT splash screens and stays there. You can hear the SS start up sounds as though the unit booted ok.
I've tried various Odins they all hang on file analysis. I've tried using different computers per the recommendations in the various threads. I've tried many of the one click and also separate file updaters. They all hang on file analysis.
I am able to use Droid explorer to view the device. I've also put a new update.zip on an sd card but nothing seems to change the splash screen.
I'm not sure how to tell what version the unit is currently on.
I can get to the 3 button state. It says Android System recovery <2e>.
I have the options to reboot, reinstall packages, delete all user data and delete cache data. I've tried each of them, no change.
I have tried to read many threads before bothering anyone. Your input would be appreciated.
Thanks
if you have the update.zip on your phone, in the root of your SD card.. then from 2eRecovery, select reinstall packages.. may have to do it twice. That will boot your phone into clockworkmod recovery.. and from there you should be able to mount storage- put a ROM on your device, flash and be good to go.
Reply to thread
Hi, Thanks for the fast response. I've tried update.zip on both an sd card and also via droid explorer, about 5 times. If I reboot, same thing, the ATT splash is there, and the Galaxy boot sound. I can get into recovery and droid explorer works. If I try Odin it hangs on file analysis. Anything else I can try? Thanks again.
Are you in dl mode when you try this, or recovery?
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
If you can get to dl mode try using AIO Captivate to flash back to stock 2.1. I've had success as I flashed with the partition checked and had to go all the way back using ODIN contained in the AIO Captivate program. Found here
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
Yeah if you can get into download mode than you are not bricked. I would Odin or Heim back to JF6 and go from there. What happened when you tried reinstalling packages from 2e? I know you said everytime you reboot- but what did it say when selected reinstall packages?
Sent from my SGH-I897 using XDA Premium App
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Great.. glad to hear it
Sent from my SGH-I897 using XDA Premium App
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Now on to some real ROM flashing!! Glad you got it working. I did almost the same thing and was sweating bullets.
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Delphin9 said:
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Click to expand...
Click to collapse
Of course it is worthed it to move to 2.3 I mean, it comes with so many more features and is running just perfect as a everyday rom. You shouldn't be disapointed
Sent from my Mosaic powered I896 using Tapatalk
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
mrhaley30705 said:
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
Click to expand...
Click to collapse
+1.
I had to make a jig when I soft bricked it. Not fun. Since then I purchased one and am glad I did.
Well, that means I won't have wasted my $2.00.
I saw this and thought it worth to try. http://www.youtube.com/watch?v=D0aoabVtPJ8
In your footer, it says you're using mosaic.
e.g. ROM: Mosaic III, ¤Kernel: Xcal's #14, ¤Modem: JK4, ¤Launcher: ADW Ex
Can you point me to the correct files/process? I guess I'm scared of screwing it up again. when I look on the forum there's almost too much info for a noob to choose which is best. Cheers...
cappy wont go into dl mode and 3 button combo wont work. it just loops at att screen. cant flash to stock with odin. nothing works. i ordered a jig. is it my only hope now or should i call att and have them get me a new one?
jig will work.... how did you get to this point? odin one click could cause a bootloop for later build phones if thats what happened use this package when your jig arrives
http://forum.xda-developers.com/showthread.php?t=995143
studacris said:
jig will work.... how did you get to this point? odin one click could cause a bootloop for later build phones if thats what happened use this package when your jig arrives
http://forum.xda-developers.com/showthread.php?t=995143
Click to expand...
Click to collapse
thanks studacris. man your a beast. you help A LOT of people on here. thankyou for all your help
edit: it was a later phone and i forgot to look. used one click to stock 2.1 and it looped at att screen. bummer.
another edit: oh forgot to ask. is there another way i can fix it without a jig?
did just what you said but now im getting kernel panic. what should i do?
umm...can you still get in download mode? try it again could judt be a bad flash...
or you can flash a froyo kernel(like speedmod) in odin and then flash a custom rom with its baked in cwm...just note: doing this will cause a bootloop from where you are now, so flash the kernel, after that boot into recovery with the 3 button combo, mount and transfer a froyo rom onto the sdcard and flash that.
studacris said:
umm...can you still get in download mode? try it again could judt be a bad flash...
or you can flash a froyo kernel(like speedmod) in odin and then flash a custom rom with its baked in cwm...just note: doing this will cause a bootloop from where you are now, so flash the kernel, after that boot into recovery with the 3 button combo, mount and transfer a froyo rom onto the sdcard and flash that.
Click to expand...
Click to collapse
flashed the kernel but the 3 button wont work to get in recovery. omg i hope this thing isnt totally bricked. its my brother in laws phone.
so...you have speedmod installed and the button combo isnt working. its bootlooping im guessing now right? which means its not bricked. anything other than completely unresponsive to anything is not a brick.
did you try just reflashing the stock rom agin at this point, or will it not go into download mode either? if it wont then its jig time, but its seriously an elementary school electronics science class project...or under 10 us dollars if you absolutly cant get your homemade one to work.
studacris said:
so...you have speedmod installed and the button combo isnt working. its bootlooping im guessing now right? which means its not bricked. anything other than completely unresponsive to anything is not a brick.
did you try just reflashing the stock rom agin at this point, or will it not go into download mode either? if it wont then its jig time, but its seriously an elementary school electronics science class project...or under 10 us dollars if you absolutly cant get your homemade one to work.
Click to expand...
Click to collapse
got my jig and have to use it to go into dl mode. installed speedmod with odin and when i do that the 3 button wont work. tried stock rom from cezars thread and 1click but it just keeps looping. i dont know what to do and again thanks for all your help.
hmmm....2 ideas then. try and flash a rogers stock rom, since i assume you are wanting to flash a rom on top of stock anyway.
http://forum.xda-developers.com/showthread.php?t=979133
and then use this to change the boot splash to one of your choosing.http://forum.xda-developers.com/showthread.php?t=944353 (scroll down to trusselo's post with the links)
or as another option try gingerbread...http://forum.xda-developers.com/showthread.php?t=1045734&highlight=tut
only try this if none of the rogers roms work, as you will need to use odin one click to restore the stock bootloaders and we know that phone doesnt like one click...
Edit: Didn't read that all the way through, my comment is now moot.
Sent from my Captivate running Continuum 5.5
Tried gb and it worked great
Sent from my SAMSUNG-SGH-I897 using XDA App
Tried all day using the search tool but couldnt find anything like this.
Tried to install continuum 6.1 on my cappy from a previous froyo build. Odin said pass on the kernel but now my phone boots to the att screen, then a fuzzy, static-like screen then promptly reboots to do it all over again. I can get into download mode but cant boot the phone normaly. Help would be appreciated. Thanks for helping a noob guys.
Did you flash Gingerbread bootloaders? like Cezar says too?
Sounds like a bootloop
Sent from a happy phone using XDA Premium App
savagefurai said:
Tried all day using the search tool but couldnt find anything like this.
Tried to install continuum 6.1 on my cappy from a previous froyo build. Odin said pass on the kernel but now my phone boots to the att screen, then a fuzzy, static-like screen then promptly reboots to do it all over again. I can get into download mode but cant boot the phone normaly. Help would be appreciated. Thanks for helping a noob guys.
Click to expand...
Click to collapse
If you can get to download mode, you're not out of luck. Go to the ODIN3 One-click and you should be able to get yourself back to a stock state where you can start clean.
Quick warning - if the rom you were trying to flash had the GB bootloaders, be extremely careful. The one-click above will overwrite the bootloaders, and if something comes unplugged during that time, you will be in need of JTAG service.
jmtheiss said:
If you can get to download mode, you're not out of luck. Go to the ODIN3 One-click and you should be able to get yourself back to a stock state where you can start clean.
Quick warning - if the rom you were trying to flash had the GB bootloaders, be extremely careful. The one-click above will overwrite the bootloaders, and if something comes unplugged during that time, you will be in need of JTAG service.
Click to expand...
Click to collapse
I don't think he did flash Bootloaders BUT if he did DO NOT use 3 button fix 1 click that will hard brick your phone.
prbassplayer said:
I don't think he did flash Bootloaders BUT if he did DO NOT use 3 button fix 1 click that will hard brick your phone.
Click to expand...
Click to collapse
Very true. I've seen several people use the wrong one, and the naming convention of ODIN3 and ODIN 3-Button doesn't really help that.
so today i upgraded to gingerbread 2.3.5 on my samsung captivate or i-897. it was all fine until i started to try the teamhacksung build 16 for ICS. i was trying to install it and somehow my phone locked up on me. everytime i try to boot up my phone it goes to galaxy s and just sits. i can get it into recovery and download but then odin will not pick it up? help?
that rom has a Q and A page. go there to ask questions about it. NOT the DEV PAGE. Q&A.try searching the thread. and reading it.
100% chance your problem has been asked at least 10 times.
i went there and searched im sorry it hasnt been thats why i posted a thing. so stop being so rude and help someone out really.
Calko2882 said:
i went there and searched im sorry it hasnt been thats why i posted a thing. so stop being so rude and help someone out really.
Click to expand...
Click to collapse
You need to be in download mode for odin to pick it up. Start odin first then with your phone off, hold in your up/down volume keys and plug in your usb cable.
Sent from my SAMSUNG-SGH-I897 using xda premium
telling you the proper place to post a question is not being rude. Im trying to help you find other people that have the same rom setup as you. they dont always look at other threads like this. they only care about THEIR ROM. so posting there, they would find your question... here they wont.
and the answer to your very first problem... if the rom install locks up (which it RARELY does) flash again.
**normally it "looks" like it locks up but the user is actually impatient, or the install script doenst program the status bar very well and it looks like its not doing anything although it is.
and first boot after flashing can take upto 10 mintues at boot animation.
ive done all of this plenty of times, ive even read how to create them. and i know you do as well. ive done all the odin i can but it got stuck at the galaxy s boot screen like the black one with white lettering and the i897 tag too. but it wont go past, and now wen i plugged it in it bricked so i have no idea wat to do now and i love this phone to death.
Calko2882 said:
ive done all of this plenty of times, ive even read how to create them. and i know you do as well. ive done all the odin i can but it got stuck at the galaxy s boot screen like the black one with white lettering and the i897 tag too. but it wont go past, and now wen i plugged it in it bricked so i have no idea wat to do now and i love this phone to death.
Click to expand...
Click to collapse
Can't you just flash something from recovery? You probably put some ROM on your sd at some point. And if not, you can do that with USB from recovery
Sent from my CM9 ICS i897 Captivate
Once you didn't get past the boot screen you should have three buttoned to recovery and flashed the from again. It happens quite often when you go to THS ICS or CM7. So if your not truly bricked which you shouldn't be unless you used a Odin with boot loaders then just used Odin and flash speed mod kernel or another kernel that will give you the correct cwm recovery. Then BEFORE trying to reboot flash the ICS ROM, then when it finishes flash it a second time BEFORE REBOOTING, then flash gapps, then reboot.
What happens is that the first time you try to go to cm7 or cm9 it basically flashes the kernel and cwm recovery from I can tell, then the second flash will be able to get you through all the boot up. Plus wait a while without touching it and it will come up. It takes a while on the first ever flash to it.
Sent from MY SPH-P100 running ICS
how can i put it on through recovery? and my usb debugging isnt on my fone just spazzed when i was loading up ics nd now its softbricked.
i actually just unbricked but i am still stuck at the galaxy s sgh-i897 screen thats black and white.
Hey everyone. I looked around the forums for a situation similar to mine, and didn't find a case exactly the same as mine, though it's possible I missed something. Basically, my little sister said her captivate was randomly shutting down lately, so I decided to root it for her. I rooted my own HTC Inspire this summer with no problems, so I figured I should be able to do it. The root went just fine, but when I tried to get into 3 button recovery mode, it wasn't working. I had read some stuff (obviously not well enough) and read somewhere to install the speedmod kernel. Now I'm stuck in a boot loop and can't get off of the Galaxy S/SGH-I897/SAMSUNG screen. I tried to go into download mode, but now I can't get into that mode either. Any ideas? I read on the forums about making a JIG, and I might have to end up doing that, but if I can avoid it, I'd like to. Thanks in advance.
Depending on what stock rom u were on before that flash of the speedmod kernel, it may not boot ur phone, because i believe it was froyo based. And if u got it from TRusselo's Guide thread it was there just so u could use it to reboot into cwm recovery and flash a dev rom. Have u tried holding both volume up and down & power buttons together until u see the at&t screen and then releasing the buttons ?? That should boot u into cwm. And from there u can flash a dev rom.
Download mode is--phone off, hold volume down, insert micro usb end of cable into phone, having already opened Odin or Heimdall and usb end of cable already connected to pc. Or of course, jig will do the trick for ya.
U could also try flashin an appropriate kernel for ur firmware u r on --- stock or dev'd. But u will need to still get into download or recovery for that. But i would think u should be able to boot up with no probs with a correct kernel.
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
Depending on what stock rom u were on before that flash of the speedmod kernel, it may not boot ur phone, because i believe it was froyo based. And if u got it from TRusselo's Guide thread it was there just so u could use it to reboot into cwm recovery and flash a dev rom. Have u tried holding both volume up and down & power buttons together until u see the at&t screen and then releasing the buttons ?? That should boot u into cwm. And from there u can flash a dev rom.
Download mode is--phone off, hold volume down, insert micro usb end of cable into phone, having already opened Odin or Heimdall and usb end of cable already connected to pc. Or of course, jig will do the trick for ya.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I did manage to get it into download mode. I had the usb cord already connected to the phone when I was holding Volume-, so that was the problem with that. Buuuut, I can't get into CWM at all. Holding Volume+ and Volume- plus the power button loads it directly into the Samsung logo screen, then reboots the phone. Maybe I need to reinstall CWM?
dshams said:
I did manage to get it into download mode. I had the usb cord already connected to the phone when I was holding Volume-, so that was the problem with that. Buuuut, I can't get into CWM at all. Holding Volume+ and Volume- plus the power button loads it directly into the Samsung logo screen, then reboots the phone. Maybe I need to reinstall CWM?
Click to expand...
Click to collapse
You need to flash a different kernel if you wanna get in recovery but at this point, flashing KK4 through Odin seems like a better idea
BWolf56 said:
You need to flash a different kernel if you wanna get in recovery but at this point, flashing KK4 through Odin seems like a better idea
Click to expand...
Click to collapse
I already went ahead and did that, and it's loading back to the regular start screen. Now I'm just trying to get CM10 on there for her, but according to their installation instructions, I need to be able to get into CWM recovery using the 3 button combo, which is where I'm currently stuck. According to one guide I'm reading right now, installing the corn kernel should fix the problem.
dshams said:
I already went ahead and did that, and it's loading back to the regular start screen. Now I'm just trying to get CM10 on there for her, but according to their installation instructions, I need to be able to get into CWM recovery using the 3 button combo, which is where I'm currently stuck. According to one guide I'm reading right now, installing the corn kernel should fix the problem.
Click to expand...
Click to collapse
Yes indeed. Have CM10 on your SD. flash Corn kernel through Odin 1.85, reboot in recovery and flash CM10 as per their instructions.
BWolf56 said:
Yes indeed. Have CM10 on your SD. flash Corn kernel through Odin 1.85, reboot in recovery and flash CM10 as per their instructions.
Click to expand...
Click to collapse
Yeah, still can't get into recovery. I turn off the phone, hold both volume buttons and the power button, but then it just stays at and keeps reloading the samsung loading screen (which now says i9000 instead of sgh-i897 like it did before). If I let go of the power button while on this screen, it progresses through the 3G/ATT screen and finally turns on the phone. Not sure what I need to do now. More research apparently.
dshams said:
Yeah, still can't get into recovery. I turn off the phone, hold both volume buttons and the power button, but then it just stays at and keeps reloading the samsung loading screen (which now says i9000 instead of sgh-i897 like it did before). If I let go of the power button while on this screen, it progresses through the 3G/ATT screen and finally turns on the phone. Not sure what I need to do now. More research apparently.
Click to expand...
Click to collapse
Which KK4 did you flash? With the I897 bootloaders or I9000? And did you flash Corn kernel?
Getting in recovery can be tricky with the button combo. you could use ROM manager to get in recovery if you did flash Corn.
BWolf56 said:
Which KK4 did you flash? With the I897 bootloaders or I9000? And did you flash Corn kernel?
Getting in recovery can be tricky with the button combo. you could use ROM manager to get in recovery if you did flash Corn.
Click to expand...
Click to collapse
Well, I assumed it was the I897 one since the guide I had been using was for that version of the captivate, but I'm going to redownload one so I can be sure. The model number under phone info says "SAMSUNG-SGH-I897" and the kernel version is the "Cornv706" version.
Also, couldn't get into recovery with ROM manager either; it just got stuck at the Samsung screen.
dshams said:
Well, I assumed it was the I897 one since the guide I had been using was for that version of the captivate, but I'm going to redownload one so I can be sure. The model number under phone info says "SAMSUNG-SGH-I897" and the kernel version is the "Cornv706" version.
Also, couldn't get into recovery with ROM manager either; it just got stuck at the Samsung screen.
Click to expand...
Click to collapse
In that case, reflash both stock KK4 and Corn Kernel. Seems like something went wrong.
BWolf56 said:
In that case, reflash both stock KK4 and Corn Kernel. Seems like something went wrong.
Click to expand...
Click to collapse
That's exactly what I did. Finally managed to get to CWM recovery and install CM10 after that. Thanks for all the help Wolf!
dshams said:
That's exactly what I did. Finally managed to get to CWM recovery and install CM10 after that. Thanks for all the help Wolf!
Click to expand...
Click to collapse
Glad I could help! :good: