Database Develop

[Q] HELP!!! Brick

ok so i have a samsung captivate. i tried to flash a rom but something went completely wrong. the phone tries to boot, says att and all but then it goes into this weird screen, theres a bunch of colors n nothing then it bootloops into the same crap. now i had it rooted, running on 2.2, cwm installed and everything.. now i cant get it into recovery not into download mode.. what can i do?

josuemldnd23 said:
ok so i have a samsung captivate. i tried to flash a rom but something went completely wrong. the phone tries to boot, says att and all but then it goes into this weird screen, theres a bunch of colors n nothing then it bootloops into the same crap. now i had it rooted, running on 2.2, cwm installed and everything.. now i cant get it into recovery not into download mode.. what can i do?
Click to expand...
Click to collapse
Check this out... http://forum.xda-developers.com/showpost.php?p=14681851&postcount=1193

Can you get into download mode?

What rom were you trying to flash? And what version of Odin were you using?
Sent from my GT-I9000 using XDA App

That happened to me...kind of like a snow screen but multi colored???
The problem was that the kernel was not compatible with the rom.
I was able to get mine into DL mode with a jig I made and re flashed a verified compatible kernel and all was well.

Its not bricked you just need to boot into download mode and use odin one click back to stock or flash the right kernel
Sent from my Captivate

I had this happen last month also, it was a bad flash going from Stock 2.2 to Continuum I think. Culprit was a cheap cable, so look out for that next time. Built a jig from the connector of the cable and all was well in Cappy-land.

pwnerman said:
Its not bricked you just need to boot into download mode and use odin one click back to stock or flash the right kernel
Sent from my Captivate
Click to expand...
Click to collapse
+1
You are not bricked.
If you can't get into download mode via buttons, build the jig.
it's really easier then it looks (it looked intimidating at first).
And once you do it successfully you will feel better about yourself.
it may take a few tries specially if you don't follow the instructions correctly

[Q] Ahhh!! I think i phucked my cappy!!! HELP!

Tried all day using the search tool but couldnt find anything like this.
Tried to install continuum 6.1 on my cappy from a previous froyo build. Odin said pass on the kernel but now my phone boots to the att screen, then a fuzzy, static-like screen then promptly reboots to do it all over again. I can get into download mode but cant boot the phone normaly. Help would be appreciated. Thanks for helping a noob guys.

Did you flash Gingerbread bootloaders? like Cezar says too?

Sounds like a bootloop
Sent from a happy phone using XDA Premium App

savagefurai said:
Tried all day using the search tool but couldnt find anything like this.
Tried to install continuum 6.1 on my cappy from a previous froyo build. Odin said pass on the kernel but now my phone boots to the att screen, then a fuzzy, static-like screen then promptly reboots to do it all over again. I can get into download mode but cant boot the phone normaly. Help would be appreciated. Thanks for helping a noob guys.
Click to expand...
Click to collapse
If you can get to download mode, you're not out of luck. Go to the ODIN3 One-click and you should be able to get yourself back to a stock state where you can start clean.
Quick warning - if the rom you were trying to flash had the GB bootloaders, be extremely careful. The one-click above will overwrite the bootloaders, and if something comes unplugged during that time, you will be in need of JTAG service.

jmtheiss said:
If you can get to download mode, you're not out of luck. Go to the ODIN3 One-click and you should be able to get yourself back to a stock state where you can start clean.
Quick warning - if the rom you were trying to flash had the GB bootloaders, be extremely careful. The one-click above will overwrite the bootloaders, and if something comes unplugged during that time, you will be in need of JTAG service.
Click to expand...
Click to collapse
I don't think he did flash Bootloaders BUT if he did DO NOT use 3 button fix 1 click that will hard brick your phone.

prbassplayer said:
I don't think he did flash Bootloaders BUT if he did DO NOT use 3 button fix 1 click that will hard brick your phone.
Click to expand...
Click to collapse
Very true. I've seen several people use the wrong one, and the naming convention of ODIN3 and ODIN 3-Button doesn't really help that.

[Q] Captivate Bricked after Odin One Click

Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.

yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
You'll have to use the full Odin program and grab a stock ROM from the development section. Once your in download flash stock ROM with through Odin or heimdall. I'm not next to my computer so I don't feel like fishing for links ..but should be fairly easy!
Sent from my SGH-I897 using xda premium

yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2

I was wondering if I should follow this thread??
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36

Might I ask do you need to get to 2.1?

prbassplayer said:
Might I ask do you need to get to 2.1?
Click to expand...
Click to collapse
When I got my phone (about a two weeks ago) it came with 2.2 already on the phone. I don't need to get to 2.1 but I was thinking I'd go to 2.1 and then upgrade to 2.2 using att? If I can?

But why? If you got it as is and its stock its att's 2.2. At any rate If your so inclined on flashing 2.1 the one you mentioned thats using full Odin with pit should work. I suggest doing it if and only if you have that jig handy. Also keep in mind that .tar probably has bootloaders in it (wich is a risk you really dont need to take) just my 2 cents

prbassplayer said:
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2
Click to expand...
Click to collapse
Links in that thread seem to be broken:/ So I suppose I can't use that.

Ive never used this one but it is also a KB1 2.2 KB1

My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.

Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.

installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it

Pirateghost said:
installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it
Click to expand...
Click to collapse
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.

prbassplayer said:
Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.
Click to expand...
Click to collapse
Once I get my jig hopefully mediafire is up and I can download from the first link you sent me. That seems to be my best bet right now. Thank you for your help. I sure hope I can get my phone backXD

yakobo said:
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.
Click to expand...
Click to collapse
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?

yakobo said:
My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.
Click to expand...
Click to collapse
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.

Pirateghost said:
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?
Click to expand...
Click to collapse
No:/ no button combos work to get me in recovery or download mode. Getting a jig (hopefully today) so I can fix all this. Yes it is in a boot loop

AdamOutler said:
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.
Click to expand...
Click to collapse
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/

yakobo said:
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/
Click to expand...
Click to collapse
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.

AdamOutler said:
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.
Click to expand...
Click to collapse
Sorry, that is what I meant. I meant to place where the charger is plugged in to. Just seems like the pins are really really tiny. Thank you for your help gonna get my resistors hopefully today and get my phone working again.

[Q] Fuzzy TV Screen after flashing wrong Kernel

I have an ATT Captivate that goes into a fuzzy screen after it goes from the initial White ATT World Phone screen. The wrong kernel was flashed on it after I mistakenly read a post trying to upgrade the the Apex rom. If anyone could be of any assistance. I can't get into Download Mode or Recovery mode... but it still turns on. I'll post screenshots if possible.

rodashtoc said:
I have an ATT Captivate that goes into a fuzzy screen after it goes from the initial White ATT World Phone screen. The wrong kernel was flashed on it after I mistakenly read a post trying to upgrade the the Apex rom. If anyone could be of any assistance. I can't get into Download Mode or Recovery mode... but it still turns on. I'll post screenshots if possible.
Click to expand...
Click to collapse
Ouch, so no download mode or recovery mode? Have you tried booting into download from ADB? if you don't know what adb is then don't worry about it. You might try seeing KIES recognizes it, if not, download any ODIN package and see if the ODIN recognizes it, if it does you're in luck! If not, then you might consider ADB: I'm no expert but I'm sure that when you have ADB there is a way to replace the Kernel Image for a proper one. Just out of curiosity, which kernel did you accidentally flash?

It has nothing to do with kernels, you have a GB ROM with Eclair/Froyo Bootloaders
Sent from my SGH-I897 using xda premium

download mode still works even if it doesnt look like it.. er.. wait download mode should still work. scratch that it WILL still work. flash gingerbread bootloaders

Well
TRusselo said:
download mode still works even if it doesnt look like it.. er.. wait download mode should still work. scratch that it WILL still work. flash gingerbread bootloaders
Click to expand...
Click to collapse
The second problem is... it loops after the fuzzy screen. It only stays for 5-10 seconds then goes back to the ATT screen.
I do know what adb is and I've used it a lot especially with my girl's Mytouch 4g. It's just this was a big problem I haven't been able to crack.
I believe the kernel that was flashed was TalonDEV 0.5.1-RC1 from http://forum.xda-developers.com/showpost.php?p=18330648&postcount=5215
Edit: Odin sees it for the 5-10 seconds it's on... but since it's bootlooping... Odin doesn't have time to do anything further than file analysis.
2nd Edit: The battery status comes up when I plug the phone up when it's off... I know that probably doesn't help, but I figure I should give all the information I can.

b-eock said:
It has nothing to do with kernels, you have a GB ROM with Eclair/Froyo Bootloaders
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Its the KERNEL.
If you have froyo bootloaders and a gingerbread ROM, it will still boot into the ROM and work. But on boot, the KERNEL splash screen is that distorted image in the OP, and also recovery is inaccessible because all you get is the distorted image. And as you should know, recovery is contained in the kernel.
If you're on froyo, and flash a gingerbread kernel, not only will you have the issues stated above, but you'll also likely be bootlooping, which is exactly the situation in the op.
OP.. You don't use Odin booted into Android, or in a bootloop. Its used in DOWNLOAD MODE ONLY.
Search for "usb download mode jig" you can make one, our buy one fur under 10 bucks. It'll boot it into dl mode in seconds.
Then go to the top of the development section, find a gingerbread package WITH bootloaders. flash that, THEN proceed with your original plan

Yes or flash gingerbread boot loaders and get recovery back, Then flash and appropriate kernel in cwm.
Hint: there is a button combination that you must preform to enable download mode it is posted several thousand times in the captivate section I would suggest go and find what it is.
Btw. The button combination happens to be posted in three or four of the stickies. And the forum rules say to read stickies before creating a thread or posting.

Listen
TRusselo said:
Yes or flash gingerbread boot loaders and get recovery back, Then flash and appropriate kernel in cwm.
Hint: there is a button combination that you must preform to enable download mode it is posted several thousand times in the captivate section I would suggest go and find what it is.
Btw. The button combination happens to be posted in three or four of the stickies. And the forum rules say to read stickies before creating a thread or posting.
Click to expand...
Click to collapse
I've read them already. I told you I can't get into either mode. I know exactly what the 3 button combination and the download combination is for this phone and since the wrong kernel was flashed on it, it's apparently not working.
Hint: being helpful is great, but when you start talking down to people, you start to become an ass. When that starts to happen, it's best you be quiet and let people who want to come up with a solution to the problem speak.
Thanks.

rodashtoc said:
I've read them already. I told you I can't get into either mode. I know exactly what the 3 button combination and the download combination is for this phone and since the wrong kernel was flashed on it, it's apparently not working.
Hint: being helpful is great, but when you start talking down to people, you start to become an ass. When that starts to happen, it's best you be quiet and let people who want to come up with a solution to the problem speak.
Thanks.
Click to expand...
Click to collapse
You need to get a jig then
Sent from my CM9 ICS i897 Captivate

Thanks
studacris said:
Its the KERNEL.
If you have froyo bootloaders and a gingerbread ROM, it will still boot into the ROM and work. But on boot, the KERNEL splash screen is that distorted image in the OP, and also recovery is inaccessible because all you get is the distorted image. And as you should know, recovery is contained in the kernel.
If you're on froyo, and flash a gingerbread kernel, not only will you have the issues stated above, but you'll also likely be bootlooping, which is exactly the situation in the op.
OP.. You don't use Odin booted into Android, or in a bootloop. Its used in DOWNLOAD MODE ONLY.
Search for "usb download mode jig" you can make one, our buy one fur under 10 bucks. It'll boot it into dl mode in seconds.
Then go to the top of the development section, find a gingerbread package WITH bootloaders. flash that, THEN proceed with your original plan
Click to expand...
Click to collapse
I'll order a jig and see if that gets me into download mode. Thanks for the explanation. I'll update this once I get some results.

Gotcha
korockinout13 said:
You need to get a jig then
Sent from my CM9 ICS i897 Captivate
Click to expand...
Click to collapse
I'm on it. Preciate it.

Fixed!
Got the jig, flashed the right kernel back on, game, set, match... 8 bucks well spent. Thanks everyone.

In future reference, you can force the phone into download mode from adb.
Using Doc's Master ROM v7: Cappy edition

KangKilla said:
In future reference, you can force the phone into download mode from adb.
Using Doc's Master ROM v7: Cappy edition
Click to expand...
Click to collapse
if the phone is in a state that accepts adb coms

[Q] Stuck in boot loop

Hey everyone. I looked around the forums for a situation similar to mine, and didn't find a case exactly the same as mine, though it's possible I missed something. Basically, my little sister said her captivate was randomly shutting down lately, so I decided to root it for her. I rooted my own HTC Inspire this summer with no problems, so I figured I should be able to do it. The root went just fine, but when I tried to get into 3 button recovery mode, it wasn't working. I had read some stuff (obviously not well enough) and read somewhere to install the speedmod kernel. Now I'm stuck in a boot loop and can't get off of the Galaxy S/SGH-I897/SAMSUNG screen. I tried to go into download mode, but now I can't get into that mode either. Any ideas? I read on the forums about making a JIG, and I might have to end up doing that, but if I can avoid it, I'd like to. Thanks in advance.

Depending on what stock rom u were on before that flash of the speedmod kernel, it may not boot ur phone, because i believe it was froyo based. And if u got it from TRusselo's Guide thread it was there just so u could use it to reboot into cwm recovery and flash a dev rom. Have u tried holding both volume up and down & power buttons together until u see the at&t screen and then releasing the buttons ?? That should boot u into cwm. And from there u can flash a dev rom.
Download mode is--phone off, hold volume down, insert micro usb end of cable into phone, having already opened Odin or Heimdall and usb end of cable already connected to pc. Or of course, jig will do the trick for ya.
U could also try flashin an appropriate kernel for ur firmware u r on --- stock or dev'd. But u will need to still get into download or recovery for that. But i would think u should be able to boot up with no probs with a correct kernel.
Sent from my SGH-I897 using xda premium

4-2ndtwin said:
Depending on what stock rom u were on before that flash of the speedmod kernel, it may not boot ur phone, because i believe it was froyo based. And if u got it from TRusselo's Guide thread it was there just so u could use it to reboot into cwm recovery and flash a dev rom. Have u tried holding both volume up and down & power buttons together until u see the at&t screen and then releasing the buttons ?? That should boot u into cwm. And from there u can flash a dev rom.
Download mode is--phone off, hold volume down, insert micro usb end of cable into phone, having already opened Odin or Heimdall and usb end of cable already connected to pc. Or of course, jig will do the trick for ya.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I did manage to get it into download mode. I had the usb cord already connected to the phone when I was holding Volume-, so that was the problem with that. Buuuut, I can't get into CWM at all. Holding Volume+ and Volume- plus the power button loads it directly into the Samsung logo screen, then reboots the phone. Maybe I need to reinstall CWM?

dshams said:
I did manage to get it into download mode. I had the usb cord already connected to the phone when I was holding Volume-, so that was the problem with that. Buuuut, I can't get into CWM at all. Holding Volume+ and Volume- plus the power button loads it directly into the Samsung logo screen, then reboots the phone. Maybe I need to reinstall CWM?
Click to expand...
Click to collapse
You need to flash a different kernel if you wanna get in recovery but at this point, flashing KK4 through Odin seems like a better idea

BWolf56 said:
You need to flash a different kernel if you wanna get in recovery but at this point, flashing KK4 through Odin seems like a better idea
Click to expand...
Click to collapse
I already went ahead and did that, and it's loading back to the regular start screen. Now I'm just trying to get CM10 on there for her, but according to their installation instructions, I need to be able to get into CWM recovery using the 3 button combo, which is where I'm currently stuck. According to one guide I'm reading right now, installing the corn kernel should fix the problem.

dshams said:
I already went ahead and did that, and it's loading back to the regular start screen. Now I'm just trying to get CM10 on there for her, but according to their installation instructions, I need to be able to get into CWM recovery using the 3 button combo, which is where I'm currently stuck. According to one guide I'm reading right now, installing the corn kernel should fix the problem.
Click to expand...
Click to collapse
Yes indeed. Have CM10 on your SD. flash Corn kernel through Odin 1.85, reboot in recovery and flash CM10 as per their instructions.

BWolf56 said:
Yes indeed. Have CM10 on your SD. flash Corn kernel through Odin 1.85, reboot in recovery and flash CM10 as per their instructions.
Click to expand...
Click to collapse
Yeah, still can't get into recovery. I turn off the phone, hold both volume buttons and the power button, but then it just stays at and keeps reloading the samsung loading screen (which now says i9000 instead of sgh-i897 like it did before). If I let go of the power button while on this screen, it progresses through the 3G/ATT screen and finally turns on the phone. Not sure what I need to do now. More research apparently.

dshams said:
Yeah, still can't get into recovery. I turn off the phone, hold both volume buttons and the power button, but then it just stays at and keeps reloading the samsung loading screen (which now says i9000 instead of sgh-i897 like it did before). If I let go of the power button while on this screen, it progresses through the 3G/ATT screen and finally turns on the phone. Not sure what I need to do now. More research apparently.
Click to expand...
Click to collapse
Which KK4 did you flash? With the I897 bootloaders or I9000? And did you flash Corn kernel?
Getting in recovery can be tricky with the button combo. you could use ROM manager to get in recovery if you did flash Corn.

BWolf56 said:
Which KK4 did you flash? With the I897 bootloaders or I9000? And did you flash Corn kernel?
Getting in recovery can be tricky with the button combo. you could use ROM manager to get in recovery if you did flash Corn.
Click to expand...
Click to collapse
Well, I assumed it was the I897 one since the guide I had been using was for that version of the captivate, but I'm going to redownload one so I can be sure. The model number under phone info says "SAMSUNG-SGH-I897" and the kernel version is the "Cornv706" version.
Also, couldn't get into recovery with ROM manager either; it just got stuck at the Samsung screen.

dshams said:
Well, I assumed it was the I897 one since the guide I had been using was for that version of the captivate, but I'm going to redownload one so I can be sure. The model number under phone info says "SAMSUNG-SGH-I897" and the kernel version is the "Cornv706" version.
Also, couldn't get into recovery with ROM manager either; it just got stuck at the Samsung screen.
Click to expand...
Click to collapse
In that case, reflash both stock KK4 and Corn Kernel. Seems like something went wrong.

BWolf56 said:
In that case, reflash both stock KK4 and Corn Kernel. Seems like something went wrong.
Click to expand...
Click to collapse
That's exactly what I did. Finally managed to get to CWM recovery and install CM10 after that. Thanks for all the help Wolf!

dshams said:
That's exactly what I did. Finally managed to get to CWM recovery and install CM10 after that. Thanks for all the help Wolf!
Click to expand...
Click to collapse
Glad I could help! :good: