Hi and thanks nAa for his work.i couldnt ask at his thread cause not enough posts.so i install the rom using instructions.i use it few hours all ok.i tried to oc it to 691 and then my screen started flickering and the right part gets cut and goes to the left any1 has any solution except to not oc(if thats the problem)
also smart keyboard isnt working after sometime cant press letters :/
Kleomenis said:
Hi and thanks nAa for his work.i couldnt ask at his thread cause not enough posts.so i install the rom using instructions.i use it few hours all ok.i tried to oc it to 691 and then my screen started flickering and the right part gets cut and goes to the left any1 has any solution except to not oc(if thats the problem)
also smart keyboard isnt working after sometime cant press letters :/
Click to expand...
Click to collapse
have overclocked to 748 MHz without any screencut.
Kleomenis said:
Hi and thanks nAa for his work.i couldnt ask at his thread cause not enough posts.so i install the rom using instructions.i use it few hours all ok.i tried to oc it to 691 and then my screen started flickering and the right part gets cut and goes to the left any1 has any solution except to not oc(if thats the problem)
also smart keyboard isnt working after sometime cant press letters :/
Click to expand...
Click to collapse
Use Nova or Apex Launcher its should be fine mate.
Ty for replies but still same problems.used both launchers.apex was laggy too
Kleomenis said:
Ty for replies but still same problems.used both launchers.apex was laggy too
Click to expand...
Click to collapse
Dude ,
Do you have Flash nAa ICS Kernel before Flash MiniCm9 Rom?
It might be the Problem,
Or Try Re-Flasing the Kernel.
Yeah did it 3 times so far :/ both kernel and rom
Kleomenis said:
Yeah did it 3 times so far :/ both kernel and rom
Click to expand...
Click to collapse
Sorry man,
I just trying to help,
maybe You can try This,
Set CPU Governor to SmartAssv2
Tick Underolt CPU,
Tick Set On Boot,
Then Reboot, Try How it work.
Im OC to 691mhz also, have no problem with it for now.
I have no screen cuts at 691
but have ones at 806
trying other frequents
@Shimizux i tried the settings u told me.so far so good no screen cuts.except smart keyboard still cant press letters
Kleomenis said:
@Shimizux i tried the settings u told me.so far so good no screen cuts.except smart keyboard still cant press letters
Click to expand...
Click to collapse
U're not alone, about Smart keyboard problem,
For now i could not find the solution, [Coz i did not use Smart Keyboard]
Related
Alright , I'm tired of looking , but I can't find a thread , answering my question. Sorry if this is a repost.
Which is the most stable Gingerbread ROM for my SE Xperia X8 E15i ?
I want a very stable and fast version. (Most Important For Me)
I will use only the Stock Kernel.
It should be virtually bugless.
I would prefer a less battery-drain ROM.
Please provide an exact name for the ROM. Download Links will be appreciated.
Thanks
Mayank77 said:
Alright , I'm tired of looking , but I can't find a thread , answering my question. Sorry if this is a repost.
Which is the most stable Gingerbread ROM for my SE Xperia X8 E15i ?
I want a very stable and fast version. (Most Important For Me)
I will use only the Stock Kernel.
It should be virtually bugless.
I would prefer a less battery-drain ROM.
Please provide an exact name for the ROM. Download Links will be appreciated.
Thanks
Click to expand...
Click to collapse
Try this
i am myself using this and i think its awsome....
http://forum.xda-developers.com/showthread.php?t=1419959
Press thanks if i helped
I still prefer GingerDX. It will work nicer if you can use Alfs kernel
for me gingerxperia is best of all on stock kernel.
gingerdx is very very laggy.
I'm using GingerXperiaRay + nAa kernel, but i don't think it works with stock kernel.
With the alfs kernel i was able to OC more than with the nAa kernel..
But tell me please, why won't you switch kernel?
TimeWasterNL said:
I'm using GingerXperiaRay + nAa kernel, but i don't think it works with stock kernel.
With the alfs kernel i was able to OC more than with the nAa kernel..
But tell me please, why won't you switch kernel?
Click to expand...
Click to collapse
Because , once I unlock the bootloader , there's no way to lock it back...
Mayank77 said:
Because , once I unlock the bootloader , there's no way to lock it back...
Click to expand...
Click to collapse
You are wrong. You can lock it back if you want
dbts25 said:
You are wrong. You can lock it back if you want
Click to expand...
Click to collapse
How ??
I mean , I read , that it's not possible.
The SE guys can easily find out.
Mayank77 said:
The SE guys can easily find out.
Click to expand...
Click to collapse
this post says SE guys can't find out...please read...
x8papa said:
t8 y we call sh!t ericsson
why they make **** like this?
just leave the bootloader alone..In my case, I'd hardbricked my w8 3times..
success only once..then when I tried to do it again my phone died man..
can't get into flash mode anymore...
sent to vendor (lucky they didn't know what I'd done)
then tried to unlocking boot loader again, and died again
(only 30miniutes the phone on my hand after take from SE)
and brick again (after 1hour took from SE)
lucky they can't detected what I've done..
on my 2nd bricked my w8 running e15i rom
heheheeee...now waiting my phone comeback!!
and I swear I won't to play with bootloader on w8 anymore
b'coz lucky on 1st time only, maybe when i sent to repair they make the security hole or whatever....
Click to expand...
Click to collapse
Mayank77 said:
How ??
I mean , I read , that it's not possible.
The SE guys can easily find out.
Click to expand...
Click to collapse
1. Flash back stock kernel using "Repair" option in SEUS or by using Flashtool
2. Download S1Tool from this post: S1Tool
3. Turn off your phone.
4. Launch s1tool.exe in the folder you extracted s1tool to.
5. Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
6. Wait for the process to complete. Congratulations! You now have relocked your bootloader!
7. To check, open s1tool.exe, click IDENTIFY button, turn off your phone, connect it in flash mode to the PC (press and hold back button while connecting your phone to the PC. The LED on your phone should flash green).
8. Continue holding back button until there is some output.
GingerXperia
GingerXperia works very nice with stock.kernel
Battery Drain
GingerDx V021 With Stock Kernel is giving me a lot of battery drain , even after battery calibrations. Wifi/3G are off ,background data and sync both are off... Display light is minimum. No background tasks running.
The battery reduces by 1% every 38seconds
No relief after reboot
Switching back to Froyopro V1.1
Mayank77 said:
GingerDx V021 With Stock Kernel is giving me a lot of battery drain , even after battery calibrations. Wifi/3G are off ,background data and sync both are off... Display light is minimum. No background tasks running.
The battery reduces by 1% every 38seconds
No relief after reboot
Switching back to Froyopro V1.1
Click to expand...
Click to collapse
What? I dont have that even on 729 mhz..
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
lucastan96 said:
What? I dont have that even on 729 mhz..
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
Click to expand...
Click to collapse
One thing I forgot to mention... I use SPB Shell 3D as my launcher...
Hope that doesn't cause the drain.
Well , there's no drain on my froyo ROM because of SPB Shell 3D
I had to Leave Gingerbread
Sad Story For Me
Mayank77 said:
One thing I forgot to mention... I use SPB Shell 3D as my launcher...
Hope that doesn't cause the drain.
Well , there's no drain on my froyo ROM because of SPB Shell 3D
I had to Leave Gingerbread
Sad Story For Me
Click to expand...
Click to collapse
try stornmix v2.2.0 , i find it smooth and with gud battery life, and its a gb rom
kirmada said:
try stornmix v2.2.0 , i find it smooth and with gud battery life, and its a gb rom
Click to expand...
Click to collapse
Are there any known bugs for stornmix v2.2.0 ?
What's the average battery life (assume 1 hour wifi , 1 hour phone call , background data on and sync on) ??
Out of nowhere my vibrations stopped working. There's no vibrations at all, that means when i touch the screen, when i receive a message or a phonecall, when i reboot my phone. I was running miniCM7 with nAa kernel (latest versions) and it worked correctly, but then it just happened. I reflashed my x8 to stock 2.1 - no luck. Flashed nAa v11 + miniCM7 2.1.9 - nothing's changed. My phone didn't fall to the floor or anything, but yet I think it might be hardware problem. Correct me if I'm wrong. Any suggestions guys ?
Regards
EDIT: Of course I performed a full wipe multiple times.
ziemny said:
Out of nowhere my vibrations stopped working. There's no vibrations at all, that means when i touch the screen, when i receive a message or a phonecall, when i reboot my phone. I was running miniCM7 with nAa kernel (latest versions) and it worked correctly, but then it just happened. I reflashed my x8 to stock 2.1 - no luck. Flashed nAa v11 + miniCM7 2.1.9 - nothing's changed. My phone didn't fall to the floor or anything, but yet I think it might be hardware problem. Correct me if I'm wrong. Any suggestions guys ?
Regards
EDIT: Of course I performed a full wipe multiple times.
Click to expand...
Click to collapse
Its usually the kernel thats the problem flash to v10 nAa and it will work
HIT THE THANKS BUTTON!!
bahmonkeys said:
Its usually the kernel thats the problem flash to v10 nAa and it will work
HIT THE THANKS BUTTON!!
Click to expand...
Click to collapse
I was on nAa 10 when it stopped working. Then i went back to stock and the problem was still there. Now im on nAa 11 and still no luck. Ill try and go back to v10 but i doubt it will help. Thanks for the answer though.
ziemny said:
I was on nAa 10 when it stopped working. Then i went back to stock and the problem was still there. Now im on nAa 11 and still no luck. Ill try and go back to v10 but i doubt it will help. Thanks for the answer though.
Click to expand...
Click to collapse
It never worked for me on nAa kernel. I just use Alfs kernel. Try out Alfs kernel but dont forget to install vold update. Let me know if it works
Dont forget to hit the thanks button!!!
bahmonkeys said:
It never worked for me on nAa kernel. I just use Alfs kernel. Try out Alfs kernel but dont forget to install vold update. Let me know if it works
Dont forget to hit the thanks button!!!
Click to expand...
Click to collapse
Just done that. Installed Alfs for GingerDX |v07| with CM7.2 GINGERBREAD V6 by Xperiafan13. Still, the problem persists :S
ziemny said:
Just done that. Installed Alfs for GingerDX |v07| with CM7.2 GINGERBREAD V6 by Xperiafan13. Still, the problem persists :S
Click to expand...
Click to collapse
Hardware problem I'm afraid!!
bahmonkeys said:
Hardware problem I'm afraid!!
Click to expand...
Click to collapse
That's what I'm thinking too... I guess I'll have to unroot it, go back to eclair, re-lock the bootloader and hope they'll replace my phone with the new one
ziemny said:
That's what I'm thinking too... I guess I'll have to unroot it, go back to eclair, re-lock the bootloader and hope they'll replace my phone with the new one
Click to expand...
Click to collapse
Eclair, Froyo or Gingerbread it doesnt matter as long as you have a stock kernel and stock rom. Lock the bootloader too. They might replace it hopefully
Goodluck!
bahmonkeys said:
Eclair, Froyo or Gingerbread it doesnt matter as long as you have a stock kernel and stock rom. Lock the bootloader too. They might replace it hopefully
Goodluck!
Click to expand...
Click to collapse
Thanks for your help friend. Thanks button hit !
ziemny said:
Thanks for your help friend. Thanks button hit !
Click to expand...
Click to collapse
No problem im here to help!!
Update: My phone fixed itself Oo. I didn't even touch it and it works.
Update 2: And it's broken again. I guess I'll stick to the replacing idea...
ziemny said:
Update: My phone fixed itself Oo. I didn't even touch it and it works.
Update 2: And it's broken again. I guess I'll stick to the replacing idea...
Click to expand...
Click to collapse
If its still under warranty don't open it. Well you could if YOU want to fix it yourself. It could be lose connection. If you plan to open it yourself I will help you
bahmonkeys said:
If its still under warranty don't open it. Well you could if YOU want to fix it yourself. It could be lose connection. If you plan to open it yourself I will help you
Click to expand...
Click to collapse
I'll just take it to the shop on monday and see if they can replace it with a new one. Thanks for you help though
My phone Stucks at lockscreen after i changed my battery ...
Why this problem occurs?
any solutions for this ?
Thanks in advance for replies
stuck at lockscreen? you mean your touchscreen doesn't work or not response?
recovery,full wipe,reflash and it all done.
take off the battery if you can't turn it off then reflash your ROM (do a full wipe first)... OR you can switch to another ROM..
damir87 said:
stuck at lockscreen? you mean your touchscreen doesn't work or not response?
Click to expand...
Click to collapse
yes the touch is not responding sometimes at lockscreen.
in that case i take out my battery and reboot the phone
Lukenda said:
recovery,full wipe,reflash and it all done.
Click to expand...
Click to collapse
i already done these things there is no change
mikel_0004 said:
take off the battery if you can't turn it off then reflash your ROM (do a full wipe first)... OR you can switch to another ROM..
Click to expand...
Click to collapse
k ill try other rom
jelamathi said:
k ill try other rom
Click to expand...
Click to collapse
there is no change after changed the rom and kernel also it still happens
Try Took you Sim card out, Turn you Phone, see how it will be.
Or, Try change you Lockscreen Setting.
Shimizux said:
Try Took you Sim card out, Turn you Phone, see how it will be.
Or, Try change you Lockscreen Setting.
Click to expand...
Click to collapse
No change..
Even i relocked bootloader and updated through seus
at the first start phone working normally once it gets locked i cant unlock it
Have you over clocked or under volt your phone? check this.
same problem with me.. but im lucky because my touch screen only work on stock rom which mean 2.1 .. if i use any custom kernel which enable multi touch, 100% sure my touch screen will not work.. this problem happen today 3 weeks of using naA ics kernel and minicm9 rom with no problems.. maybe the hardware is faulty?
dipusen said:
Have you over clocked or under volt your phone? check this.
Click to expand...
Click to collapse
Yes i overclocked 0nly to 691Mhz
sharmix0x0 said:
same problem with me.. but im lucky because my touch screen only work on stock rom which mean 2.1 .. if i use any custom kernel which enable multi touch, 100% sure my touch screen will not work.. this problem happen today 3 weeks of using naA ics kernel and minicm9 rom with no problems.. maybe the hardware is faulty?
Click to expand...
Click to collapse
First it occured first when i started using minicm9 rom with naa ics
i recently flashed cyanmobile revo A. and after using it a few minutes then phone rebooted randomly ..
happening frequently throughout the day...
how to fix ????
try fresh flash
A5D said:
i recently flashed cyanmobile revo A. and after using it a few minutes then phone rebooted randomly ..
happening frequently throughout the day...
how to fix ????
Click to expand...
Click to collapse
Did U Wipe Data N Cache before n after flash roms?
i dOnt problem like u...
....sory if my english bad..
..PleSe PrEss ThaNkS BuTToN If ItS HeLpInG U..
i get reboot only when it very lag (frenzy), then it auto reboot!
What the???
I have just ended a call with my wife, put the phone on the desk and I see a boot screen...
what the hell is going on? Have not had that issue on Iniatial A...
Happened a couple times already...
lockdalf said:
What the???
I have just ended a call with my wife, put the phone on the desk and I see a boot screen...
what the hell is going on? Have not had that issue on Iniatial A...
Happened a couple times already...
Click to expand...
Click to collapse
what is the OC rate of your phone? plz lower it down to whatever freq level it would stabilize. if it is 864Mhz lower it down to 844Mhz, if it still doing it lower it down until it stabilizes
lockdalf said:
What the???
I have just ended a call with my wife, put the phone on the desk and I see a boot screen...
what the hell is going on? Have not had that issue on Iniatial A...
Happened a couple times already...
Click to expand...
Click to collapse
same thing here bro!
and the rom itself is quite laggy even at 748 mhz lagree governor
music stuttering also present ..
and the biggest error here is
earlier the videos i could play easily are lagging tooo much and are unplayable now in the previous verson they were smoooth while in revo it just doent work with stock or any other player ( mobo or mx player)
[email protected] said:
what is the OC rate of your phone? plz lower it down to whatever freq level it would stabilize. if it is 864Mhz lower it down to 844Mhz, if it still doing it lower it down until it stabilizes
Click to expand...
Click to collapse
Actually I did not OC at all, I am still at the original 245-604Mhz with ONDEMAND Governor
And how about the font ? I hear from madteam some language chines, japan, vietnamese show [], i worried about it
I am going to flashing this ROM, but now still not, because read this and read problem with front!
AFAIK....there is no bug in reboot situation and i believe no bug fix from squad...i flashed CyanMobile just to check wether i got a reboot problem with so many others,but no...i didnt had it..
before i flashed CyanMobile,i flash stock rom via odin to clean dalvikbyte code error(Squadzone said:-because the write and read on the system partition and the sdcard is weaker because of flashing again and again continuosly without refreshment through ODIN)...in this case i choose XWKTN,then flash CWM...then i flash CyanMobile with full wipe before not after...then flash bluetooth update,just mount system 1st..
And i got no single reboot itself,and just for info...i didnt apply a single tweak not even amarulz......peace
Use a Rom with less bugs. There are enough to choose off.
Gesendet von meinem WT19i mit Tapatalk
motorazrv3 said:
Use a Rom with less bugs. There are enough to choose off.
Gesendet von meinem WT19i mit Tapatalk
Click to expand...
Click to collapse
i was on stock rom before and i read here and there people had problem with CyanMobile so i just checked with my device and trying to help...
one more thing...if your device are willing to change a roms,i bet even you excited to try some.....didnt you?...peace
A5D said:
same thing here bro!
and the rom itself is quite laggy even at 748 mhz lagree governor
music stuttering also present ..
and the biggest error here is
earlier the videos i could play easily are lagging tooo much and are unplayable now in the previous verson they were smoooth while in revo it just doent work with stock or any other player ( mobo or mx player)
Click to expand...
Click to collapse
does anyone else having this video play bug???
i cant play any videos that ran easily earlier
andreasf93 said:
Idd, there are many roms to choose but none as good as CyanMobile and so customizable!
Sent from SGM using CyanMobile Revo A
Click to expand...
Click to collapse
Thats destany. You have to choose:
more customizable and more bugs
or better
less customizable and therefore almost no bugs.
My choice would be less customizable and almost no bugs.
A5D said:
does anyone else having this video play bug???
i cant play any videos that ran easily earlier
Click to expand...
Click to collapse
Squadzone already released fix for bluetooth and video playback.Did you apply that update?...i played videos with mxplayer and its run well
Ya..when cyan mobile system not responding its auto reboot(i mean lag)?...me oso have this problem its normal??
Sent from my GT-S5570 using XDA
AndroidUser99 said:
Ya..when cyan mobile system not responding its auto reboot(i mean lag)?...me oso have this problem its normal??
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
if you OC,try make it default.....try remove tweaks if you had one.
i just trying to help...
janmae said:
AFAIK....there is no bug in reboot situation and i believe no bug fix from squad...i flashed CyanMobile just to check wether i got a reboot problem with so many others,but no...i didnt had it..
before i flashed CyanMobile,i flash stock rom via odin to clean dalvikbyte code error(Squadzone said:-because the write and read on the system partition and the sdcard is weaker because of flashing again and again continuosly without refreshment through ODIN)...in this case i choose XWKTN,then flash CWM...then i flash CyanMobile with full wipe before not after...then flash bluetooth update,just mount system 1st..
And i got no single reboot itself,and just for info...i didnt apply a single tweak not even amarulz......peace
Click to expand...
Click to collapse
Thanks for the Idea man, I have done this for emanon V6 and it is running smooth. Seems like my system was really cluttered after trying like 7 different roms in less than a week...
my cellphone also reboot freguently (s5570).
lockdalf said:
Thanks for the Idea man, I have done this for emanon V6 and it is running smooth. Seems like my system was really cluttered after trying like 7 different roms in less than a week...
Click to expand...
Click to collapse
yes,after running a couple of roms..better do refreshment by odin and just to make sure your system is clean,do a hard reset...dial *2767*3855# then after flashing via odin...
---------- Post added at 09:48 AM ---------- Previous post was at 09:47 AM ----------
muro321 said:
my cellphone also reboot freguently (s5570).
Click to expand...
Click to collapse
try read this one... http://forum.xda-developers.com/showpost.php?p=25337024&postcount=11
not only cyanmobile, i am using cm7 rc5, and sometime press power button, screen not light, then it reboot in some second
Hi Guys,
Any body having a similar issue ????
Yes. I do too. No solution yet. Have you written on the Tiramisu thread yet?
Sent from my GT-I9000 using XDA
Cant write .... cos my posts are less
satankid said:
Hi Guys,
Any body having a similar issue ????
Click to expand...
Click to collapse
yes i had the same problem too. i guess its rom or kernel problem ..
first of all tell me if you are using devil kernel???
well going ahead..since trying wont hurt...do these steps and see if your problem is solved after each step...
1)first of all,trying changing to kernel to another one
2))if you have any task killer,check gallery and music players and power amp are not in the auto kill list...and check if its solved..
3)uncheck deep idle option...and check agn...
4)increase buffer size in power amp setting to huge....and check it again...after googling abt it alott...i only found out these things...
right now on cm7,,,,and trust me my life is peace now... ...ICS is having so many small small bugs which are annoying...
Uhmm... i just upgrade to Rc1.1 that based on slimsrom. and i dont have any issues with PAMP. but try to wipe data factory + cache + dalvik + format system. and then Fix premission..
khiyatesh said:
yes i had the same problem too. i guess its rom or kernel problem ..
first of all tell me if you are using devil kernel???
well going ahead..since trying wont hurt...do these steps and see if your problem is solved after each step...
1)first of all,trying changing to kernel to another one
2))if you have any task killer,check gallery and music players and power amp are not in the auto kill list...and check if its solved..
3)uncheck deep idle option...and check agn...
4)increase buffer size in power amp setting to huge....and check it again...after googling abt it alott...i only found out these things...
right now on cm7,,,,and trust me my life is peace now... ...ICS is having so many small small bugs which are annoying...
Click to expand...
Click to collapse
Hi,
Tried all this ... Didnt work....
Is CM7 not having bugs ??? i heard there are many ????
ssharonv said:
Uhmm... i just upgrade to Rc1.1 that based on slimsrom. and i dont have any issues with PAMP. but try to wipe data factory + cache + dalvik + format system. and then Fix premission..
Click to expand...
Click to collapse
im on RC 1.1 slim ... tried the same however its not happening... after the screen goes off pamp stops ... or i should say the kernel closes it/.... then when any button is pressed then pamp resumes but again stops after the screen goes off
Tried on RC 2 but still the same ... Tried even keeping the processs in pamp setting .... still no use !!!! Can someone tell DJ sound.... i love the ROM and even PAMP tooo ... Want to keep both
I have found a workaround !!!! Touch wake should be activated with delay 0ms.... Little battery wastage is there but can be neglected
satankid said:
Hi,
Tried all this ... Didnt work....
Is CM7 not having bugs ??? i heard there are many ????
Click to expand...
Click to collapse
nope it doesnt.....and trust me its hell smooth...
my brother keeps on saying....your cell has become so ****ing smooth that it keeps on slipping from my hand....lol...
its the fastest rom i hv seen....apps open up like they have been in ram all the time even it you force close and reopen em....try it,..you willl get what i m tryna say...
khiyatesh said:
nope it doesnt.....and trust me its hell smooth...
my brother keeps on saying....your cell has become so ****ing smooth that it keeps on slipping from my hand....lol...
its the fastest rom i hv seen....apps open up like they have been in ram all the time even it you force close and reopen em....try it,..you willl get what i m tryna say...
Click to expand...
Click to collapse
Can u tell me which one to use ???? Links would be appreciated
satankid said:
Can u tell me which one to use ???? Links would be appreciated
Click to expand...
Click to collapse
The Guys in Tiramisu are soooooooooooo Rude !!!!