[Q] My phone Stucks at lockscreen - XPERIA X8 Q&A, Help & Troubleshooting

My phone Stucks at lockscreen after i changed my battery ...
Why this problem occurs?
any solutions for this ?
Thanks in advance for replies

stuck at lockscreen? you mean your touchscreen doesn't work or not response?

recovery,full wipe,reflash and it all done.

take off the battery if you can't turn it off then reflash your ROM (do a full wipe first)... OR you can switch to another ROM..

damir87 said:
stuck at lockscreen? you mean your touchscreen doesn't work or not response?
Click to expand...
Click to collapse
yes the touch is not responding sometimes at lockscreen.
in that case i take out my battery and reboot the phone

Lukenda said:
recovery,full wipe,reflash and it all done.
Click to expand...
Click to collapse
i already done these things there is no change

mikel_0004 said:
take off the battery if you can't turn it off then reflash your ROM (do a full wipe first)... OR you can switch to another ROM..
Click to expand...
Click to collapse
k ill try other rom

jelamathi said:
k ill try other rom
Click to expand...
Click to collapse
there is no change after changed the rom and kernel also it still happens

Try Took you Sim card out, Turn you Phone, see how it will be.
Or, Try change you Lockscreen Setting.

Shimizux said:
Try Took you Sim card out, Turn you Phone, see how it will be.
Or, Try change you Lockscreen Setting.
Click to expand...
Click to collapse
No change..
Even i relocked bootloader and updated through seus
at the first start phone working normally once it gets locked i cant unlock it

Have you over clocked or under volt your phone? check this.

same problem with me.. but im lucky because my touch screen only work on stock rom which mean 2.1 .. if i use any custom kernel which enable multi touch, 100% sure my touch screen will not work.. this problem happen today 3 weeks of using naA ics kernel and minicm9 rom with no problems.. maybe the hardware is faulty?

dipusen said:
Have you over clocked or under volt your phone? check this.
Click to expand...
Click to collapse
Yes i overclocked 0nly to 691Mhz

sharmix0x0 said:
same problem with me.. but im lucky because my touch screen only work on stock rom which mean 2.1 .. if i use any custom kernel which enable multi touch, 100% sure my touch screen will not work.. this problem happen today 3 weeks of using naA ics kernel and minicm9 rom with no problems.. maybe the hardware is faulty?
Click to expand...
Click to collapse
First it occured first when i started using minicm9 rom with naa ics

Related

ROMs are killing me

hi all , i am using GDX v21 it's great and all but the problem is ...
-it keeps rebooting by itself!
-at times when the screen timeout it wont turn on ...i am forced to remove the battery to reboot the phone
at first i thought it'a bug so i full wiped my phone restored with tita backup
about a day later boom! it happened again!! AND I CANT TAKE IT!!
it happens when i
-open wifi
-downloading songs
-or open wifi in general
THAT IS WHY IT'S SO ANNOYING I AM DOWNLOADING SONGS AND IT REBOOTS i lost all my progress!! ARRR
so is there a solution?? or is there going to be a bug fix in the next GDX version?
i am considering a new rom ...what is the most stable rom out there? i tried froyobread 2.2 but the link i am unable to enter ...help please!
have you wiped it WITHOUT doing a titanium backup?? it could be an app causing it.
also what kernel version you running?
gingerxperia v13/14
erm..imma using stock kernel~ i full wipe throught cwm ...i cant enter xrecovery too with GDX ...i love GDX really...but this is quite serious
have you done a re-wipe and installed NOTHING? dont do a titanium restore.
tried before when the 1st time this problem occured...back then i have no tita but no use
is your bootloader unlocked? you could try a custom kernel it might help. or you could try a different rom to see if you still get the same problem.
also do you know how to use ADB? if you do could you do a adb logcat -d logcat.txt and upload it for us to see?
no no unlock bootloader for me! hard brick my phone once and dont dare to do again ...
oh..i know whats adb...u mean terminal emulator? type that code in my w8?
it's too simple mate...
just use GDX v20 first...
heppy new year...
LOL good idea!! hahaha! say if it happens again i will flash it to v20!!
and......??
whar u r waiting for?????
just hit thanks button twice....
to show some good idea from me...
Heppy new year!
nelikp said:
and......??
whar u r waiting for?????
just hit thanks button twice....
to show some good idea from me...
Heppy new year!
Click to expand...
Click to collapse
lol you spelt happy wrong. you put heppy
that what we call internet language...
tot=thought
heppy=happy
but should I say sorry...?
I'm sorry
tohno said:
hi all , i am using GDX v21 it's great and all but the problem is ...
-it keeps rebooting by itself!
-at times when the screen timeout it wont turn on ...i am forced to remove the battery to reboot the phone
at first i thought it'a bug so i full wiped my phone restored with tita backup
about a day later boom! it happened again!! AND I CANT TAKE IT!!
it happens when i
-open wifi
-downloading songs
-or open wifi in general
THAT IS WHY IT'S SO ANNOYING I AM DOWNLOADING SONGS AND IT REBOOTS i lost all my progress!! ARRR
so is there a solution?? or is there going to be a bug fix in the next GDX version?
i am considering a new rom ...what is the most stable rom out there? i tried froyobread 2.2 but the link i am unable to enter ...help please!
Click to expand...
Click to collapse
basically if you want to have a gingerbread rom try kuya droid
ginger DX is full of bugs.
and if you want a really stable rom try froyobread
you can download it from here http://forum.xda-developers.com/showthread.php?t=1079463
press thanks if i helped
nelikp said:
that what we call internet language...
tot=thought
heppy=happy
but should I say sorry...?
I'm sorry
Click to expand...
Click to collapse
You don't need to say sorry
sent from my x8 running gingerdx
wilbso said:
You don't need to say sorry
sent from my x8 running gingerdx
Click to expand...
Click to collapse
yeah..that great..
cheers..!
tohno said:
hi all , i am using GDX v21 it's great and all but the problem is ...
-it keeps rebooting by itself!
-at times when the screen timeout it wont turn on ...i am forced to remove the battery to reboot the phone
at first i thought it'a bug so i full wiped my phone restored with tita backup
about a day later boom! it happened again!! AND I CANT TAKE IT!!
it happens when i
-open wifi
-downloading songs
-or open wifi in general
THAT IS WHY IT'S SO ANNOYING I AM DOWNLOADING SONGS AND IT REBOOTS i lost all my progress!! ARRR
so is there a solution?? or is there going to be a bug fix in the next GDX version?
i am considering a new rom ...what is the most stable rom out there? i tried froyobread 2.2 but the link i am unable to enter ...help please!
Click to expand...
Click to collapse
try stornmix v2, very smooth
Try minicm its fast and stable
Sent from my E15i using XDA App

SE Xperia X8 Gingerbread ROM

Alright , I'm tired of looking , but I can't find a thread , answering my question. Sorry if this is a repost.
Which is the most stable Gingerbread ROM for my SE Xperia X8 E15i ?
I want a very stable and fast version. (Most Important For Me)
I will use only the Stock Kernel.
It should be virtually bugless.
I would prefer a less battery-drain ROM.
Please provide an exact name for the ROM. Download Links will be appreciated.
Thanks
Mayank77 said:
Alright , I'm tired of looking , but I can't find a thread , answering my question. Sorry if this is a repost.
Which is the most stable Gingerbread ROM for my SE Xperia X8 E15i ?
I want a very stable and fast version. (Most Important For Me)
I will use only the Stock Kernel.
It should be virtually bugless.
I would prefer a less battery-drain ROM.
Please provide an exact name for the ROM. Download Links will be appreciated.
Thanks
Click to expand...
Click to collapse
Try this
i am myself using this and i think its awsome....
http://forum.xda-developers.com/showthread.php?t=1419959
Press thanks if i helped
I still prefer GingerDX. It will work nicer if you can use Alfs kernel
for me gingerxperia is best of all on stock kernel.
gingerdx is very very laggy.
I'm using GingerXperiaRay + nAa kernel, but i don't think it works with stock kernel.
With the alfs kernel i was able to OC more than with the nAa kernel..
But tell me please, why won't you switch kernel?
TimeWasterNL said:
I'm using GingerXperiaRay + nAa kernel, but i don't think it works with stock kernel.
With the alfs kernel i was able to OC more than with the nAa kernel..
But tell me please, why won't you switch kernel?
Click to expand...
Click to collapse
Because , once I unlock the bootloader , there's no way to lock it back...
Mayank77 said:
Because , once I unlock the bootloader , there's no way to lock it back...
Click to expand...
Click to collapse
You are wrong. You can lock it back if you want
dbts25 said:
You are wrong. You can lock it back if you want
Click to expand...
Click to collapse
How ??
I mean , I read , that it's not possible.
The SE guys can easily find out.
Mayank77 said:
The SE guys can easily find out.
Click to expand...
Click to collapse
this post says SE guys can't find out...please read...
x8papa said:
t8 y we call sh!t ericsson
why they make **** like this?
just leave the bootloader alone..In my case, I'd hardbricked my w8 3times..
success only once..then when I tried to do it again my phone died man..
can't get into flash mode anymore...
sent to vendor (lucky they didn't know what I'd done)
then tried to unlocking boot loader again, and died again
(only 30miniutes the phone on my hand after take from SE)
and brick again (after 1hour took from SE)
lucky they can't detected what I've done..
on my 2nd bricked my w8 running e15i rom
heheheeee...now waiting my phone comeback!!
and I swear I won't to play with bootloader on w8 anymore
b'coz lucky on 1st time only, maybe when i sent to repair they make the security hole or whatever....
Click to expand...
Click to collapse
Mayank77 said:
How ??
I mean , I read , that it's not possible.
The SE guys can easily find out.
Click to expand...
Click to collapse
1. Flash back stock kernel using "Repair" option in SEUS or by using Flashtool
2. Download S1Tool from this post: S1Tool
3. Turn off your phone.
4. Launch s1tool.exe in the folder you extracted s1tool to.
5. Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
6. Wait for the process to complete. Congratulations! You now have relocked your bootloader!
7. To check, open s1tool.exe, click IDENTIFY button, turn off your phone, connect it in flash mode to the PC (press and hold back button while connecting your phone to the PC. The LED on your phone should flash green).
8. Continue holding back button until there is some output.
GingerXperia
GingerXperia works very nice with stock.kernel
Battery Drain
GingerDx V021 With Stock Kernel is giving me a lot of battery drain , even after battery calibrations. Wifi/3G are off ,background data and sync both are off... Display light is minimum. No background tasks running.
The battery reduces by 1% every 38seconds
No relief after reboot
Switching back to Froyopro V1.1
Mayank77 said:
GingerDx V021 With Stock Kernel is giving me a lot of battery drain , even after battery calibrations. Wifi/3G are off ,background data and sync both are off... Display light is minimum. No background tasks running.
The battery reduces by 1% every 38seconds
No relief after reboot
Switching back to Froyopro V1.1
Click to expand...
Click to collapse
What? I dont have that even on 729 mhz..
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
lucastan96 said:
What? I dont have that even on 729 mhz..
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
Click to expand...
Click to collapse
One thing I forgot to mention... I use SPB Shell 3D as my launcher...
Hope that doesn't cause the drain.
Well , there's no drain on my froyo ROM because of SPB Shell 3D
I had to Leave Gingerbread
Sad Story For Me
Mayank77 said:
One thing I forgot to mention... I use SPB Shell 3D as my launcher...
Hope that doesn't cause the drain.
Well , there's no drain on my froyo ROM because of SPB Shell 3D
I had to Leave Gingerbread
Sad Story For Me
Click to expand...
Click to collapse
try stornmix v2.2.0 , i find it smooth and with gud battery life, and its a gb rom
kirmada said:
try stornmix v2.2.0 , i find it smooth and with gud battery life, and its a gb rom
Click to expand...
Click to collapse
Are there any known bugs for stornmix v2.2.0 ?
What's the average battery life (assume 1 hour wifi , 1 hour phone call , background data on and sync on) ??

[Q] Vibrations stopped working in general

Out of nowhere my vibrations stopped working. There's no vibrations at all, that means when i touch the screen, when i receive a message or a phonecall, when i reboot my phone. I was running miniCM7 with nAa kernel (latest versions) and it worked correctly, but then it just happened. I reflashed my x8 to stock 2.1 - no luck. Flashed nAa v11 + miniCM7 2.1.9 - nothing's changed. My phone didn't fall to the floor or anything, but yet I think it might be hardware problem. Correct me if I'm wrong. Any suggestions guys ?
Regards
EDIT: Of course I performed a full wipe multiple times.
ziemny said:
Out of nowhere my vibrations stopped working. There's no vibrations at all, that means when i touch the screen, when i receive a message or a phonecall, when i reboot my phone. I was running miniCM7 with nAa kernel (latest versions) and it worked correctly, but then it just happened. I reflashed my x8 to stock 2.1 - no luck. Flashed nAa v11 + miniCM7 2.1.9 - nothing's changed. My phone didn't fall to the floor or anything, but yet I think it might be hardware problem. Correct me if I'm wrong. Any suggestions guys ?
Regards
EDIT: Of course I performed a full wipe multiple times.
Click to expand...
Click to collapse
Its usually the kernel thats the problem flash to v10 nAa and it will work
HIT THE THANKS BUTTON!!
bahmonkeys said:
Its usually the kernel thats the problem flash to v10 nAa and it will work
HIT THE THANKS BUTTON!!
Click to expand...
Click to collapse
I was on nAa 10 when it stopped working. Then i went back to stock and the problem was still there. Now im on nAa 11 and still no luck. Ill try and go back to v10 but i doubt it will help. Thanks for the answer though.
ziemny said:
I was on nAa 10 when it stopped working. Then i went back to stock and the problem was still there. Now im on nAa 11 and still no luck. Ill try and go back to v10 but i doubt it will help. Thanks for the answer though.
Click to expand...
Click to collapse
It never worked for me on nAa kernel. I just use Alfs kernel. Try out Alfs kernel but dont forget to install vold update. Let me know if it works
Dont forget to hit the thanks button!!!
bahmonkeys said:
It never worked for me on nAa kernel. I just use Alfs kernel. Try out Alfs kernel but dont forget to install vold update. Let me know if it works
Dont forget to hit the thanks button!!!
Click to expand...
Click to collapse
Just done that. Installed Alfs for GingerDX |v07| with CM7.2 GINGERBREAD V6 by Xperiafan13. Still, the problem persists :S
ziemny said:
Just done that. Installed Alfs for GingerDX |v07| with CM7.2 GINGERBREAD V6 by Xperiafan13. Still, the problem persists :S
Click to expand...
Click to collapse
Hardware problem I'm afraid!!
bahmonkeys said:
Hardware problem I'm afraid!!
Click to expand...
Click to collapse
That's what I'm thinking too... I guess I'll have to unroot it, go back to eclair, re-lock the bootloader and hope they'll replace my phone with the new one
ziemny said:
That's what I'm thinking too... I guess I'll have to unroot it, go back to eclair, re-lock the bootloader and hope they'll replace my phone with the new one
Click to expand...
Click to collapse
Eclair, Froyo or Gingerbread it doesnt matter as long as you have a stock kernel and stock rom. Lock the bootloader too. They might replace it hopefully
Goodluck!
bahmonkeys said:
Eclair, Froyo or Gingerbread it doesnt matter as long as you have a stock kernel and stock rom. Lock the bootloader too. They might replace it hopefully
Goodluck!
Click to expand...
Click to collapse
Thanks for your help friend. Thanks button hit !
ziemny said:
Thanks for your help friend. Thanks button hit !
Click to expand...
Click to collapse
No problem im here to help!!
Update: My phone fixed itself Oo. I didn't even touch it and it works.
Update 2: And it's broken again. I guess I'll stick to the replacing idea...
ziemny said:
Update: My phone fixed itself Oo. I didn't even touch it and it works.
Update 2: And it's broken again. I guess I'll stick to the replacing idea...
Click to expand...
Click to collapse
If its still under warranty don't open it. Well you could if YOU want to fix it yourself. It could be lose connection. If you plan to open it yourself I will help you
bahmonkeys said:
If its still under warranty don't open it. Well you could if YOU want to fix it yourself. It could be lose connection. If you plan to open it yourself I will help you
Click to expand...
Click to collapse
I'll just take it to the shop on monday and see if they can replace it with a new one. Thanks for you help though

QUESTION MiniCM9-3.0.0 screen flickering/cuts

Hi and thanks nAa for his work.i couldnt ask at his thread cause not enough posts.so i install the rom using instructions.i use it few hours all ok.i tried to oc it to 691 and then my screen started flickering and the right part gets cut and goes to the left any1 has any solution except to not oc(if thats the problem)
also smart keyboard isnt working after sometime cant press letters :/
Kleomenis said:
Hi and thanks nAa for his work.i couldnt ask at his thread cause not enough posts.so i install the rom using instructions.i use it few hours all ok.i tried to oc it to 691 and then my screen started flickering and the right part gets cut and goes to the left any1 has any solution except to not oc(if thats the problem)
also smart keyboard isnt working after sometime cant press letters :/
Click to expand...
Click to collapse
have overclocked to 748 MHz without any screencut.
Kleomenis said:
Hi and thanks nAa for his work.i couldnt ask at his thread cause not enough posts.so i install the rom using instructions.i use it few hours all ok.i tried to oc it to 691 and then my screen started flickering and the right part gets cut and goes to the left any1 has any solution except to not oc(if thats the problem)
also smart keyboard isnt working after sometime cant press letters :/
Click to expand...
Click to collapse
Use Nova or Apex Launcher its should be fine mate.
Ty for replies but still same problems.used both launchers.apex was laggy too
Kleomenis said:
Ty for replies but still same problems.used both launchers.apex was laggy too
Click to expand...
Click to collapse
Dude ,
Do you have Flash nAa ICS Kernel before Flash MiniCm9 Rom?
It might be the Problem,
Or Try Re-Flasing the Kernel.
Yeah did it 3 times so far :/ both kernel and rom
Kleomenis said:
Yeah did it 3 times so far :/ both kernel and rom
Click to expand...
Click to collapse
Sorry man,
I just trying to help,
maybe You can try This,
Set CPU Governor to SmartAssv2
Tick Underolt CPU,
Tick Set On Boot,
Then Reboot, Try How it work.
Im OC to 691mhz also, have no problem with it for now.
I have no screen cuts at 691
but have ones at 806
trying other frequents
@Shimizux i tried the settings u told me.so far so good no screen cuts.except smart keyboard still cant press letters
Kleomenis said:
@Shimizux i tried the settings u told me.so far so good no screen cuts.except smart keyboard still cant press letters
Click to expand...
Click to collapse
U're not alone, about Smart keyboard problem,
For now i could not find the solution, [Coz i did not use Smart Keyboard]

Help me please ( notifications )

hi
first : sorry for my bad english
I have a problem with my E15i and it is :
Notifications panel does not come down when I touch the screen and my touch screen does not work correctly but when I turn the phone and screen rotate ,it works well.
Please answer . thanks
My Phone :
bootloader unlock
it problem with kernel.
i have locked bootloader so i cant help you
E15ideveloper said:
hi
first : sorry for my bad english
I have a problem with my E15i and it is :
Notifications panel does not come down when I touch the screen and my touch screen does not work correctly but when I turn the phone and screen rotate ,it works well.
Please answer . thanks
My Phone :
bootloader unlock
Click to expand...
Click to collapse
What kernel are you running?
If it's Alfs, then flash the add-on pack...
Can you tell us a bit info regarding the problem provided with the kernel and rom you use?
I have this problem with all kernels. but now I use nAa-12 with minicm7 2.2.1.
I tested this ways but the problem does not fix:
1. format memory and change the rom and kernel
2.lock the bootloader
and I forgot say it :
touch screen is good for 2 or 3 hours after this while it works badly and it become ok when I reboot the phone but after 2 hours again has problem
E15ideveloper said:
I have this problem with all kernels. but now I use nAa-12 with minicm7 2.2.1.
I tested this ways but the problem does not fix:
1. format memory and change the rom and kernel
2.lock the bootloader
and I forgot say it :
touch screen is good for 2 or 3 hours after this while it works badly and it become ok when I reboot the phone but after 2 hours again has problem
Click to expand...
Click to collapse
Maybe u can try to flash both of it..
The kernel and rom..
And read the minicm bugs thread..
Sent from my E15i using xda app-developers app
BlackRabbit1703 said:
Maybe u can try to flash both of it..
The kernel and rom..
And read the minicm bugs thread..
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
my friend I tested that way but the problem does not fix.
Is it an hardware problem ?
nobody can help me?
please help me . it makes me crazy
Maybe the device got some water or moisture into it.
Open it & try blowing thru it.
Or, it might be the kernel prob, but the possibility is low, according to me.
And also, clean the mobile once, dust or some other crap..

Categories

Resources