Database Develop

Boot loop - neither recovery nor download mode possible

Hi,
got a bit of an emergency here. Maybe someone got a useful hint for me?
I've been running X-Power 3.0 ROM with Perseus kernel 32.1 so far and just finished undervolting the kernel via SetCPU - ROM booted up fine afterwards.
But today I decided to give Perseus 33 a try, and after flashing the TAR with ODIN mobile my phone won't boot again - it shows the "Galaxy S III" screen, blanks the screen again and then restarts again - I can't get the phone into recovery or download mode
Any hints on how to solve this one?

try pulling the battery out and trying to get into download again. I'd that doesn't work, you have to get a usb jig, that has a small chance of working.

Glebun said:
try pulling the battery out and trying to get into download again. I'd that doesn't work, you have to get a usb jig, that has a small chance of working.
Click to expand...
Click to collapse
Thanks for helping. I somehow got into recovery in between, but I can't tell why - AFAIK I did it all the same way times and again before, but now I was able to restore a CWM backup :good:

Try using TWRP recovery:
http://goo.im/devs/OpenRecovery
Find you Model number...
I find its easiest.
Sent from my GT-I9305 using xda app-developers app

Pheoxy said:
Try using TWRP recovery:
http://goo.im/devs/OpenRecovery
Find you Model number...
I find its easiest.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
wouldn't have made a difference

Glebun said:
wouldn't have made a difference
Click to expand...
Click to collapse
I wasn't meaning the Bootloop, just the Recovery itself once it was fixed.

Saksham.Ar
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!

saksham.2991 said:
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
Click to expand...
Click to collapse
One try a USB Recovery Jig
Two take to a service centre .
jje

saksham.2991 said:
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
Click to expand...
Click to collapse
read the thread before posting

5 steps
JJEgan said:
One try a USB Recovery Jig
Two take to a service centre .
jje
Click to expand...
Click to collapse
Hello,
I had the same problem with another device. What me helped was:
1. Using a USB-Jig - then Downloadmode went on on its own
2. Flasing CWM- Recovery (with Odin)
3. AFTER THAT put out Battery for some seconds (10s)
4. CWM- was accessible
5. deleting cache and dalvik, (and did a factory reset but think that wasn't the point),
and bootloop wad gone.
Hope that helped,
Quantenkosmos.

Thank you this thread is how many months old .

I Bricked my Galaxy Mini :(

Hi guys, I'm the developer of the mokee os for our mini.
Today.. working with a kernel, i flashed my phone with an experimental version of my mokee.
Now my phone can't boot: the screen starts blinking on and off...
I can access only to download mode and ramdump mode.
I flashed lots of firmwares (4 files and one package too) and odin complete the flashing process without errors, but the mini blinks.
What can i do?
I have no warranty :crying:

remove your battery n try to wipe in recovery mode or take to service center

manoj94 said:
remove your battery n try to wipe in recovery mode or take to service center
Click to expand...
Click to collapse
Read before replying please..
I can't access to recovery mode...

did you tryed to reflash recovery with odin and check autoboot ?

Use JIG or JITAG
Sent from my GT-S5570 using Tapatalk 2

The phone enters download mode iff it can be fixed or else it won't show download mode either. Dunno how u r fixing...
Sent Via XDA™ Premium

grigtm said:
did you tryed to reflash recovery with odin and check autoboot ?
Click to expand...
Click to collapse
Yes..i did.
The screen turn on.. samsung logo and off.. in loop

sad25kag said:
Use JIG or JITAG
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
Why do i need jtag if i can flash normally in download mode?

in zeppelinorox's post abouth v6 supercharger it mention at some point and give a link to a post abouth KAK file, there is a zip file names unkakyourself, maybe it will help
Sent from my GT-S6500D using xda app-developers app

[Q] Samsung Galaxy Mini GT-S5570B died after Cyanogenmod 7.2.

I was using that rom: http://forum.xda-developers.com/showthread.php?t=2085347, and after install Cyanogenmod 7.2 (http://download.cyanogenmod.org/?type=stable&device=tass) on my phone, i click "Reboot system now" on recovery mode (Clockworkmod Recovery 5.0.2.8), and they just dont turned ON again, and now, NOTHING WORKS.
I tried to remove battery, put battery, i tried all the keys combo on the phone, and they even turn on the display, only the mode thats working is the RAMDump (Arm9), but still with the screen off. How i now thats rampdum mode is working? I connect the phone on my pc through the USB and pressed Home Button + Power Button + Volume UP Button and my PC recognize him, but i think there are nothing i could do with ramdump mode. I saw that post http://forum.xda-developers.com/showthread.php?t=1688137, but my device is different and maybe theres something more wrong, and i don't know...
Anyway, THANK YOU GUYS. Hugs!

u did something wrong during flashin the rom..anyways install official stock GB using odin and try again..
Sent from my GT-S5570 using xda app-developers app

SlogansoleS said:
u did something wrong during flashin the rom..anyways install official stock GB using odin and try again..
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
How could i do this if my phone don't enter on download mode? They just enter on RAMDump mode (ARM9)...

ok. i think its,motherboard problem. repalce motherboard or search for a 'download mode adaptor'. i dont know how to use that..but u can google it.
Sent from my GT-S5570 using xda app-developers app

SlogansoleS said:
ok. i think its,motherboard problem. repalce motherboard or search for a 'download mode adaptor'. i dont know how to use that..but u can google it.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
I did the JIB USB, and nothing works, my phone wont turn on again and nothing on the screen was showed up, i don't know what i supposed to do :\

Did you wipe data ? You did something wrong here.

F4uzan said:
Did you wipe data ? You did something wrong here.
Click to expand...
Click to collapse
After or before install the rom? But what happen if have i forgotten to wipe after?

victorcqueirozg said:
After or before install the rom? But what happen if have i forgotten to wipe after?
Click to expand...
Click to collapse
Before.

F4uzan said:
Before.
Click to expand...
Click to collapse
I think i didn't wipe anything before. But, if i had did that, what should i do?

A USB JIG with 313 K will take care of it? What do you guys think?

[HELP] Can't unbrick my i9001

Hi everybody !
Yesterday, I swapped the sd cards of my gs+ but the phone didn't boot and stayed at the boot animation (CM10.1). So, I tried to restock it but Odin stayed at the AMSS download. I tried to install many other stock ROM but it was stuck at this thread. Today, I retry to flash CWM recovery and stock ROM but now it block at setup connection. I don't know why because I put the ariesve.ops file in the good section.
I have already bricked my phone many times but the restock worked fine.
What can I do ? Please help me I love my I9001 ! :crying:
Thanks a lot for your answers !

TomTheFrench said:
Hi everybody !
Yesterday, I swapped the sd cards of my gs+ but the phone didn't boot and stayed at the boot animation (CM10.1). So, I tried to restock it but Odin stayed at the AMSS download. I tried to install many other stock ROM but it was stuck at this thread. Today, I retry to flash CWM recovery and stock ROM but now it block at setup connection. I don't know why because I put the ariesve.ops file in the good section.
I have already bricked my phone many times but the restock worked fine.
What can I do ? Please help me I love my I9001 ! :crying:
Thanks a lot for your answers !
Click to expand...
Click to collapse
The best solutions is to go to a Samsung Service. I had bricked my phone to and i paid 100 $ and they changed my motherboard. Or go to a professional service.

blackbunny96 said:
The best solutions is to go to a Samsung Service. I had bricked my phone to and i paid 100 $ and they changed my motherboard. Or go to a professional service.
Click to expand...
Click to collapse
I like my S+ but I don't want to pay 100$ for a thing I think I can do by myself ^^

Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app

jabrif said:
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Downloading ...

do not worry is happening for me everytime i want to flash the stock firmware.. just change the USB port power off the phone then put it in downloading mode and try again till you succeed

TheRippaG said:
do not worry is happening for me everytime i want to flash the stock firmware.. just change the USB port power off the phone then put it in downloading mode and try again till you succeed
Click to expand...
Click to collapse
Thank you a lot for your answer I hope it will work

TomTheFrench said:
I like my S+ but I don't want to pay 100$ for a thing I think I can do by myself ^^
Click to expand...
Click to collapse
My phone didn't boot to download mode or recovery mode , i trieed with a JIG but it didn't boot to download mode. That's why I payed 100$. Can you boot to download mode?

jabrif said:
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
WORKS ! :victory:

blackbunny96 said:
My phone didn't boot to download mode or recovery mode , i trieed with a JIG but it didn't boot to download mode. That's why I payed 100$. Can you boot to download mode?
Click to expand...
Click to collapse
Yes I can boot into download mod that's I thought there is an issue

TomTheFrench said:
WORKS ! :victory:
Click to expand...
Click to collapse
:thumbup:
Sent from my GT-I9001 using xda app-developers app

The problem you had was caused by ODIN. I've had it to. You have to use a specific version of ODIN and that version is the one you finde in the recovery package you've just used. So beware in the future!
Sent from my GT-I9001 using Tapatalk 2

silviu_iliescu said:
The problem you had was caused by ODIN. I've had it to. You have to use a specific version of ODIN and that version is the one you finde in the recovery package you've just used. So beware in the future!
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
I tried with 3 versions of Odin but now I'm glad it is working fine

From now on you can use this http://easyandroidsolutions.blogspot.ro/2012/10/recover-samsung-galaxy-s-plus-i9001.html

It is very important to use correct version of ODIN, happened to me too with my first flashing

Questions belong in the Q&A and Help section -- Refer to this thread
Please read the XDA forum rules before posting
Thank you for your cooperation
Thread moved
Towle
XDA Moderator

Hello !! need help its so important to me :/
i think i have the same you had
and i even tried worked2 but when it rebooting in Odin it stuck in the logo of CM 10 after rebooting and don't go to recovery mode
but i still can see my download mode and i think the CWM is not exist now

.NetDeveloper said:
i think i have the same you had
and i even tried worked2 but when it rebooting in Odin it stuck in the logo of CM 10 after rebooting and don't go to recovery mode
but i still can see my download mode and i think the CWM is not exist now
Click to expand...
Click to collapse
If you successfully flashed cwm via odin. switch off the phone. take out the battery and insert it back.
Connect your data cable to your phone(not to pc). Then press and hold volume up button and switch on the phone. When the samsung logo appears leave the button. When Samsung galaxy s plus logo appears, just tap the menu button(left touch button). You will get in to the CWM recovery. Then wipe data, wipe cache, wipe dalvic cache (in advanced menu). Then flash a new rom.

[Q] Galaxy note-Black screen of death

Hey guys I am using international Galaxy Note N7000.I switched from CM10.1 to official jelly bean 4.1 without wiping data and now that when the hold the power button I can hear the phone starting(sound) but I don't see any thing on the screen and even I see nothing when I hold hold the recovery mode keys,all I see is a black screen.Now my phone is bricked how can I unbrick?
Please help quickly.
Thank you!!

dont post double threads...
how did you flash jb?
If you know path to cm, why would unclean path back work?
Anyways, go check if you can go to download mode.
If you can, flash a wipe rom with pitfile from ketans sticky in development thread.
at own risk

baz77 said:
dont post double threads...
how did you flash jb?
If you know path to cm, why would unclean path back work?
Anyways, go check if you can go to download mode.
If you can, flash a wipe rom with pitfile from ketans sticky in development thread.
at own risk
Click to expand...
Click to collapse
I flashed it with Odin from download mode and no I am unable to go to downloade mode and how to flash with pitfile,please help me I am in huge trouble.

nsnarayan10 said:
I flashed it with Odin from download mode and no I am unable to go to downloade mode and how to flash with pitfile,please help me I am in huge trouble.
Click to expand...
Click to collapse
And the phone only vibrates but never turns on,somebody please help me

If there is no download mode or recovery mode then there is no way to revive the phone. On the other thread you mentioned that you flashed a S2 rom.
Sent from my GT-I9500 using xda premium

nokiamodeln91 said:
If there is no download mode or recovery mode then there is no way to revive the phone. On the other thread you mentioned that you flashed a S2 rom.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
ouch that is a tough one, Try a search on jig. There might be a way but I have never tried.
Sent from my GT-N7000 using Tapatalk 2