i was using w8 with PrimeHD 6.0 on stock kernel , installer busybox new version through buzybox installer , install v6 supercharger and ended up bricking my phone... now who out of the two is responsible n please help me in installing v6 supercharger i really wanna experience it
What version of busybox did you install? Because if you installed the latest version that is what caused the brick. It has been mentioned in the supercharger thread that it is not compatible with newer version of busybox. So you have to have an older version of busybox( I don't remember which one probably 1.18 or below) and then install supercharger script.
sent from my x8 using xda premium
ronnie-steelheart said:
What version of busybox did you install? Because if you installed the latest version that is what caused the brick. It has been mentioned in the supercharger thread that it is not compatible with newer version of busybox. So you have to have an older version of busybox( I don't remember which one probably 1.18 or below) and then install supercharger script.
sent from my x8 using xda premium
Click to expand...
Click to collapse
i installed 1.19.x ... may b thats the reason but watsoever now its recovered n will again try acc to ur suggestions
bro... is updating busybox safe? i have read some threads sayings "once installed, busybox should not be updated " i have version 1.15.xx installed n v6 says it requires 1.16.xx .... what should i do now
manishmalhotra said:
bro... is updating busybox safe? i have read some threads sayings "once installed, busybox should not be updated " i have version 1.15.xx installed n v6 says it requires 1.16.xx .... what should i do now
Click to expand...
Click to collapse
Some roms u can not update busybox
and u will end with soft brick if u try to do so
it's not supercharger at all
semdxd said:
Some roms u can not update busybox
and u will end with soft brick if u try to do so
it's not supercharger at all
Click to expand...
Click to collapse
now what should i do...!!! request haka to help including v6 supercharger in PrimeHD
manishmalhotra said:
now what should i do...!!! request haka to help including v6 supercharger in PrimeHD
Click to expand...
Click to collapse
I didn't like supercharger it doesn't make any difference
Install it with any busybox but it's not recommended
manishmalhotra said:
i was using w8 with PrimeHD 6.0 on stock kernel , installer busybox new version through buzybox installer , install v6 supercharger and ended up bricking my phone... now who out of the two is responsible n please help me in installing v6 supercharger i really wanna experience it
Click to expand...
Click to collapse
Superchanger working for me, make my x8 better than before, i use busybox 1.19, and stock kernel
Sent from my X8 using xda premium
topol89 said:
Superchanger working for me, make my x8 better than before, i use busybox 1.19, and stock kernel
Sent from my X8 using xda premium
Click to expand...
Click to collapse
which rom u use?? do u use ram manager pro?? and at what frequency have you overclocked your device?? m asking all this because if these things match and u still feel your x8 is better than i ll definately install v6 by hook or by crook
manishmalhotra said:
bro... is updating busybox safe? i have read some threads sayings "once installed, busybox should not be updated " i have version 1.15.xx installed n v6 says it requires 1.16.xx .... what should i do now
Click to expand...
Click to collapse
If your busybox is below v1.16.2 you should use v8 supercharger which can be found in the same thread where you find v6 supercharger..it should work for you..but I have used v6 supercharger for several months when I was on GDX v22- even on stock kernel which have busybox v1.15.3 and worked like charm..but don't try the kickass kernelizer script on that version of busybox which will brick your phone for sure..but of course it may have a different result on yours but as I say "It worth to try"..but as I suggest try v8 Supercharger script for a safer result..
Sent from my X8 using Tapatalk
MiniCm7/Minicm9 supercharger work perfectly No Softbrick.
zeppelinrox has mention that if you phone doesnt want boot,
Pull you battery out, on again.
Atleast 3 times. If it was still the same problem.
Then IDK. LOL.
manishmalhotra said:
which rom u use?? do u use ram manager pro?? and at what frequency have you overclocked your device?? m asking all this because if these things match and u still feel your x8 is better than i ll definately install v6 by hook or by crook
Click to expand...
Click to collapse
i use PrimeHD rom, not use ram manager pro, not overclocked, just use superchanger v6, it makes my x8 better than before
sandy_tea said:
If your busybox is below v1.16.2 you should use v8 supercharger which can be found in the same thread where you find v6 supercharger..it should work for you..but I have used v6 supercharger for several months when I was on GDX v22- even on stock kernel which have busybox v1.15.3 and worked like charm..but don't try the kickass kernelizer script on that version of busybox which will brick your phone for sure..but of course it may have a different result on yours but as I say "It worth to try"..but as I suggest try v8 Supercharger script for a safer result..
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
ty bro installed v8. will take some time to see the difference as my present rom is already really smooth with other tweaks, overclocking and ram manager
[edit]
This was probably a wrong section to post. I opened a new thread at Q&A about Unbricking Teclast P85 after installing busybox 1.19
Related
I installed this version recently and I noticed that there is no multitouch! Before this newest version I was using v013 and multitouch was supported.Any idea why there is no multitouch in latest version?Is it supported in v016?
I install multitouch on GingerDX v17 with x8toolbox beta4
I will try it right now. Thanks.
EDIT: It doesn't work... I get to waiting for device and nothing happens.
GDX need his kernel to support MT or install stock kernel addons.
try ROM] kuyaDROID | v3.2.175 | CM 7.1.0- i really love that room, was using dx 17, but cant use tether, with kuya rom, all works more faster, and i can use tether.
XtraAndro1d said:
I installed this version recently and I noticed that there is no multitouch! Before this newest version I was using v013 and multitouch was supported.Any idea why there is no multitouch in latest version?Is it supported in v016?
Click to expand...
Click to collapse
i installed it and i found the problem. proberly cuz i didnt flash linuxdx.
so im sticking with v013 for now
check-out this thread http://forum.xda-developers.com/showthread.php?t=1135965
I installed this version recently and I noticed that there is no multitouch! Before this newest version I was using v013 and multitouch was supported.Any idea why there is no multitouch in latest version?Is it supported in v016?
Click to expand...
Click to collapse
Flash the modules in gingerdx thread. first post.. scroll down until you see where it says "Addons optional".. http://forum.xda-developers.com/showthread.php?t=1188486
There is no need to flash linuxdx.. Just use the modules with stock kernel.
---------- Post added at 08:26 AM ---------- Previous post was at 08:22 AM ----------
wilbso said:
i installed it and i found the problem. proberly cuz i didnt flash linuxdx.
so im sticking with v013 for now
Click to expand...
Click to collapse
It's not a problem. DX removed the add ons to enable him to put them in his kernel and provided an add ons pack to flash after installing the rom for those of us on stock kernel. The only "problem" is no one bothers to READ...
Guys please search the forum first for any solution. I also had this problem after upgrading but solved. Follow the link given and read carefully.
You dont need to install LinuxDX.
http://forum.xda-developers.com/showthread.php?t=1004740
Dx would be pissed if he saw this :S
Sent from my X8 using xda premium
dipusen said:
Guys please search the forum first for any solution. I also had this problem after upgrading but solved. Follow the link given and read carefully.
You dont need to install LinuxDX.
http://forum.xda-developers.com/showthread.php?t=1004740
Click to expand...
Click to collapse
hehe. give the poor n00bs a chance. When it starts to go wrong, its just so hard to read!
I think the multitouch module shows something on dmesg in adb shell. But I dont remember whether that was the MDDI module or this multi-touch module. And make sure you used the right module for your digitizer.
I have a little problem with camera apk. The texture (camera view frame) is different than stock gingerbread. I don't know if it is a bug or dx change but it looks terrible. How can i fix that?
XtraAndro1d said:
I installed this version recently and I noticed that there is no multitouch! Before this newest version I was using v013 and multitouch was supported.Any idea why there is no multitouch in latest version?Is it supported in v016?
Click to expand...
Click to collapse
doixanh removed dualtouch because he wanted to add on more mods and room for linuxdx to be on there. there is meant to be no dual touch preinstalled on there. thats why i use v013
wilbso said:
doixanh removed dualtouch because he wanted to add on more mods and room for linuxdx to be on there. there is meant to be no dual touch preinstalled on there. thats why i use v013
Click to expand...
Click to collapse
But you can still get the modules by flashing the addons zip in the GingerDX thread.
Chris95X8 said:
But you can still get the modules by flashing the addons zip in the GingerDX thread.
Click to expand...
Click to collapse
yep, that can be done too. it certainly makes life easier when you flash addons that are mostly essential
replay replay ı thınk sad
Yeah,I figured out addons module... I like Ginger DX,I'm really happy with it.
and so? what u waiting for?
install GDX v19 and + flash nAa kernel or alfs v004 kernel or LinuxDX v003
u'll have dual touch on your lovely device..
Hye guyz...
I'm new to this forum but this forum has help me a lot.today I'm an officially became the member of this forum .
My question is....is it safe to install Chainfire3D??cos I used to get my lovely shakira brick.My phone brick after I install the chainfire3D(include the opengl thing).But before this I managed to install Chainfire3D without getting brick.I install it a couples time(because I'm flashing new version of rom) and it work like a charm.before I flash the rom(GingerXperia v10) I install busybox v1.18.2 to make supercharger script works.then I install the chainfire3d and get my phone brick.is it the busybox cause the brick?or GingerXperia v10 is the cause??
BTW I'm now running GingerXperia v10 with stock kernel.I hope somebody can explaine and help me.Cause I like Chainfire3D.It help me to run game smoother.
I think its busybox....try not to update ur busybox from market...use the old one what u have used for installing the rom..
Sent from my X8 using XDA App
thanks....i will try it...
Supercharger works fine with the normal busybox that we also need for our recoveries.
Just don´t update it.
thanks guys...you all help me a lot.today I manage to install chainfire3d without any brick.works like a charm...
First of all im saying that im new and noob in custom rom section. my 1st installed custom rom was KuyaDroid. in that rom i was able to overclock my x8 in cmmod/performance section. but i cant do it in GingerDX.
My GingerDX installed process:-
1.first i installed "update-GingerDX.v019" in xrecovery via install custom zip,
2.then i also install "addons.modules.for.stock.kernel" by same process and full wipe and reboot.
i found that Duell touch works, but i cant overclock it like in kuyadroid.Now plz tell me what should i do?
itsShuvo said:
First of all im saying that im new and noob in custom rom section. my 1st installed custom rom was KuyaDroid. in that rom i was able to overclock my x8 in cmmod/performance section. but i cant do it in GingerDX.
My GingerDX installed process:-
1.first i installed "update-GingerDX.v019" in xrecovery via install custom zip,
2.then i also install "addons.modules.for.stock.kernel" by same process and full wipe and reboot.
i found that Duell touch works, but i cant overclock it like in kuyadroid.Now plz tell me what should i do?
Click to expand...
Click to collapse
Gingerdx does not have the overclock module but you can also overclock your x8 using dx's overclock module.
Then what's the use of "addons.modules.for.stock.kernel" that i installed by xrecovery.isn't it have dx's overclock module? i found x8oc.ko module in system/lib/Modules.then it means its not working. what should i do?
First if all you should install gdx with cwm, second ir you wanna this options you should install custom kernel, otherwise download from market some app for overclock your cpu
Sent from my X8 using XDA App
Thanks for ur reply guys.
itsShuvo said:
Thanks for ur reply guys.
Click to expand...
Click to collapse
please tell settled or not?
put x8oc.ko in system/lib/modules/
by default its 691MHz, to change speed, use SetCPU or CPU monitoring app.
Hello there, i have a problem with gingerDx v29, im using v28 atm with alfs v09a, so far so good, but when i instal v29 i get a com.android.phone error as soon as i put the ping and then the error keeps looping. i tryed re-instal, wipe data, (wipe everything that i could with CMW actualy) but it still doesnt work, i read the forum in order to find an answer but didnt find it with this SO, (also tryed a solution that seams to work in others so like fix permisions). How do i solve this?
I really hate to bother but its been 5 days and i can make it work.
Thanks in advance!
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
update Ginger DX v29
Hello i am a new user asking about the update of DX v29. i recently purchased X8 having
Configuration .
Model no E15i ,
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
it worked!
playjun said:
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
Click to expand...
Click to collapse
thanks man, that was the problem, i cant belive i didnt saw that, thanks a lot
And for the guy asking a guide this is what i did:
download the alfs v09a kernel right in the rom page
download the rom
download the libsensor patch
download the addon
put the rom, the libsensor patch and the addon in ur sd card
flash the kernel
start in cwm
go to instal zip option, instal the rom, the libsensor and the addon
restart
enjoy
i just did it and its working fine but im finding a strange bug though, my screen seams to be moving a little bit to the left everytime :X
when i fix it i let you know how xD
Thanks again to playjun _o_
(Q) overclock in GingerDX V29 dont work?
Hi, I was trying to place GingerDX v29 overclock and does not work, any suggestions?
sorry my english,
problem
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Answer
terrordroid said:
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Click to expand...
Click to collapse
open it by touching the screen on the Sony Ericsson logo.
GingerDX v029 version selection help
First of all thanx to all
by reading a lot of stuff in this forum .successfully root the phone and install xrecovery and its working .
but i have some confusion about the
[
1 .GingerDX-v029-shakira-stock.zip GingerDX v029 nAa/alfs
2. GingerDX-v029-robyn.zip GingerDX v029 for robyn
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
The confusion is which one is for my xperia X8 .
Please help me for this My xperia configuration is
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .
Hey man... ur x8 also knwn as shakira... use that rom
Sent from my X8 using xda app-developers app
stone009 said:
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
Click to expand...
Click to collapse
get the number 3 (i think your still in lock bootloader) and dont forget the addons.and read the standard procedure.goodluck
sent from my x8™ using gingerDX®
The diferent versions are for diferent kernels, for example im using Alfs kernel so i instal the number 1, i think u still using stock kernel so instal the stock one, the number 3
if you have any problems you can allways find the default rom and flash it back or try another one
Good luck
need help
(3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2 is for my x8 .
do i need the update Kernel version ?
or its work on my original configuration as below
My xperia X8 configuration is
Rooted by Superoneclick.
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
get that number 3
and addon( standard settings for stock and superuser ) and read some fix in the thread...
opps your on 11w22?
read a bit about unlocking bootloader.
sent from my x8™ using gingerDX®
alfs v9a
im having a little screen moving problem, i think its the kernel alfs v9a, i'll try v8 and let you know
Edit; Alfs v8a solves the problem
Hey guys i'm having the same problem with the screen moving bug, it moves to the right a little bit. I tried alfs v8 and it solved the problem but I still don't think it's the best answer since the combo gdx v29 and alfs v8 has A LOT of battery drain on 3g and sync on (in 8 hours it drains 90 percent of the battery just in standby).
Is there any other thing I can do to fix this screen problem? If not i'll just go back to stock kernel
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
cascabel said:
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
Click to expand...
Click to collapse
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Sorry. I meant 691.
Sent from my rooted tomato using xda app
Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Try other frequencies
Sent from my X8 using xda premium
Hi.
I have an xperia x8, with gingerdx 028, stock kernel.
Today I try to flash a newer busybox to it, cause the superuser not works properly (sometimes didn't ask for permissions).
I've installed one from the market, after that I stuck at bootloop.
No CWM recovery, only adb, can't boot to recovery with adb reboot recovery, so I don't have root permissions.
My question is, that is it possible, to change the busybox, without recovery and root?
ONLY ADB WORKS!!
Thank you so much!
prezident36 said:
Hi.
I have an xperia x8, with gingerdx 028, stock kernel.
Today I try to flash a newer busybox to it, cause the superuser not works properly (sometimes didn't ask for permissions).
I've installed one from the market, after that I stuck at bootloop.
No CWM recovery, only adb, can't boot to recovery with adb reboot recovery, so I don't have root permissions.
My question is, that is it possible, to change the busybox, without recovery and root?
ONLY ADB WORKS!!
Thank you so much!
Click to expand...
Click to collapse
Use Sony PCC and Reflash stock rom using 'repair your phone' option. Do not install the busybox from market agan. It's known to unroot and give bootloops on x8/x10/w8. download x8toolbox.final from here and root. everything should be fine from them on.
http://forum.xda-developers.com/showthread.php?t=1117100
HIT THANKS IF I HELPED!!!
You aren't suppose to update busybox on your own..
Also , I don't think it was a busybox problem causing the bug..
Next time , simply do a full-wipe and reflash your ROM.
You shouldn't touch busybox on stock kernel because it will brick the phone.
Lajbymester said:
You shouldn't touch busybox on stock kernel because it will brick the phone.
Click to expand...
Click to collapse
+1
Mine bricked once
Sent from my W8 using xda app-developers app
I have the same problem with Busybox bricking my phone. I followed this tutorial to install SuperCharger and when I install BusyBox (1.19.4) and reboot, my phone gets bricked.
EDIT:
I have GingerDX v30 and stock kernel.
It seems that Busybox above v1.15.3 bricks the phone when you have stock kernel.
Skoll_21 said:
I have the same problem with Busybox bricking my phone. I followed this tutorial to install SuperCharger and when I install BusyBox (1.19.4) and reboot, my phone gets bricked.
EDIT:
I have GingerDX v30 and stock kernel.
It seems that Busybox above v1.15.3 bricks the phone when you have stock kernel.
Click to expand...
Click to collapse
You cant update busybox while you are on a custom rom.
use the busybox zip provided in the supercharger thread
Lots of missinformation about updating BusyBox while on stock kernel.
prezident36 said:
Today I try to flash a newer busybox to it, cause the superuser not works properly (sometimes didn't ask for permissions).
Click to expand...
Click to collapse
If you're using SuperSU, try with Superuser. If you're with Superuser, try SuperSU.
Mayank77 said:
You aren't suppose to update busybox on your own..
Click to expand...
Click to collapse
Why not? It's done by people all the time.
Lajbymester said:
You shouldn't touch busybox on stock kernel because it will brick the phone.
Click to expand...
Click to collapse
Skoll_21 said:
It seems that Busybox above v1.15.3 bricks the phone when you have stock kernel.
Click to expand...
Click to collapse
The culprit is not the kernel, but the ROM(s). As I said elsewhere, there's at least one ROM for stock kernel in which updating BusyBox brings no problems: MiniCM6. And, of course, any ROMs using it as base, such as AtiFroyo.
stamatis said:
You cant update busybox while you are on a custom rom.
Click to expand...
Click to collapse
You can.
CnC-ROCK said:
use the busybox zip provided in the supercharger thread
Click to expand...
Click to collapse
No. It will still cause a bootloop in GingerDX.
really? AtiFroyo did not get bricked?
Because FroyoPro did.
Hmm....
Anyways: STOCK rom does not brick by updating busybox as well....
Fortun said:
....
Click to expand...
Click to collapse
i have myself used that zip and it works.
i gave the zip here too and it worked for this person
http://forum.xda-developers.com/showthread.php?t=1971705
B.Jay said:
Busybox NEWER than version 1.15.3 (the version we ship by default with the ROM) does NOT work on Stock Kernel. Simple as that.
Contrary to what you said the culprit is kernel and not rom.
On Alfs you'll be updated to Busybox 1.19.4 once you install the Alfs AddOn, but as said above there's no way to update on Stock kernel - it will simply not work and brick the boot of the ROM.
Believe me, we tried everything.
Click to expand...
Click to collapse
this is what B.Jay had to say. So now if you know more than B.Jay then tell the OP that there is no problem in updating busybox or else donot pass on wrong info
@CnC-ROCK - Have you read what prezident36 wrote? He's on GingerDX v028 on stock kernel. The zip from the Supercharger thread won't work.
Also, B.Jay is wrong in this particular case. And as elderduke has pointed out, you can update the stock ROM on stock kernel without problems, hence the problem does not lie with the kernel.
elderduke said:
really? AtiFroyo did not get bricked?
Because FroyoPro did.
Hmm....
Anyways: STOCK rom does not brick by updating busybox as well....
Click to expand...
Click to collapse
Don't quote me on this one, but I'm guessing that the problem stems from the hackdroid base. Both FroyoBread and GingerDX use it... as well as kuyaDROID. And I wouldn't be surprised if GingerCruzt used it also, but I don't remember trying to update BusyBox in it.
Fortun said:
Lots of missinformation about updating BusyBox while on stock kernel.
If you're using SuperSU, try with Superuser. If you're with Superuser, try SuperSU.
Why not? It's done by people all the time.
The culprit is not the kernel, but the ROM(s). As I said elsewhere, there's at least one ROM for stock kernel in which updating BusyBox brings no problems: MiniCM6. And, of course, any ROMs using it as base, such as AtiFroyo.
You can.
No. It will still cause a bootloop in GingerDX.
Click to expand...
Click to collapse
Dude you cant update busybox through market( i havent try any zips) at a custom rom(on stock kernel)...
stamatis said:
Dude you cant update busybox through market( i havent try any zips) at a custom rom...
Click to expand...
Click to collapse
Well, I believe you. You probably can't update BusyBox through a market app, I haven't it tried it tho. But you most definitively can using the zip file from the Supercharger thread. As long as you meet the requirements.
Direct question :
I'm on GDX v30 stock kernel...
Latest busybox available for me??
wanna thank xda? here
---------- Post added at 09:39 PM ---------- Previous post was at 09:38 PM ----------
Updating busybox via market app gives brick!
wanna thank xda? here
Fortun said:
Well, I believe you. You probably can't update BusyBox through a market app, I haven't it tried it tho. But you most definitively can using the zip file from the Supercharger thread. As long as you meet the requirements.
Click to expand...
Click to collapse
Thats exactly what I said earlier and you said that the zip wont work
Sent from my XPERIA X8 using xda premium
Gogeta said:
Direct question :
I'm on GDX v30 stock kernel...
Latest busybox available for me??
Click to expand...
Click to collapse
The one that comes with the ROM.
CnC-ROCK said:
Thats exactly what I said earlier and you said that the zip wont work
Click to expand...
Click to collapse
prezident36 explicitly said that he's on stock kernel and GingerDX v028. Then you suggested that he should try the zip in the Supercharger thread. The zip won't work with GingerDX and stock kernel... and that was my point.
Gogeta said:
Direct question :
I'm on GDX v30 stock kernel...
Latest busybox available for me??
wanna thank xda? here
---------- Post added at 09:39 PM ---------- Previous post was at 09:38 PM ----------
Updating busybox via market app gives brick!
wanna thank xda? here
Click to expand...
Click to collapse
no
elderduke said:
no
Click to expand...
Click to collapse
Mine bricked!
wanna thank xda? here