Hi
The shIFt key seems to turn on and off automatically for some reason. started yesterday. I tried a lot of things to see if the problem goes away but it hasn't. I'll list what I've done so YOU guys know.
restarted, turned the accessibility action off (where you click shift 5 times) still nothing. I opened up tHe ON Screen kEYboArd and saw the two shift keys kept on flicking. Tried the alt + ctrl thing. Didn't work.
I know it's not to do with the keyboard as i plugged it out and the on screen keyboard still kept on toggling On aNd OFf
I'm Running
OS: Windows 7 64bit
Driver: NVIDIA GeForce GTS 450
Related
Can anyone tell me what the screens says once you pressed R to reset it. Do I just have to turn it off / on or is further input required? It was running on batteries when I was resetting it - but with 100%.
Background:
Hey there! Since some days my Xperia X1 had a weird error. It worked very well until you opened the Keyboard - then the screen got messy and stayed black even if you closed the keyboard again. Getting it into "Standby" by pushing the Powerbutton for a sec and an 2nd time to "wake it up" everything was fine again (the screen was ok).
It stayed ok until you slide the Keyboard out - even if just a tiny bit, the screen got messy and once fully opened it got dark and stayed dark, until it was closed again and sent into Standby and Back...
Sending it into Standby while the Keyboard was open did not work, it hat to be closed...
I hoped that I could solve this error by a Hard Reset - so I did, but to press the "R" Button I had to use the Keyboard.
So the screen is black again and I don't know if it is still doing a Hard Reset or if it waits for further Input (once you have pressed "R" to reset).
You have a hardware problem, the flex cable is worn out and would have to be replaced.
But to answer your question you have to press space bar after the R.
Thanks! I its't even a year old and the thing broke?!?
Now that's great - I guess i have an Ebay item once it is returned!
So I will have to flash it to a custom firmware back blind but it think that
for flashing the device I have seen tutorials on youtube...
Hello, I have a very big problem. I have Htc Kaiser. Keyboar not working in windows (when he still had) apart from d-pad (sometimes, but with times, but more often department into quite other way ) I flash Android (is a problem with colors).
I can't turn PDA in Bootloader mode. I press and hold camera key, soft reset , and sometimes turn on key. PDa turn in SMART MOBILITY text and i can't go back to Windows, or change te Android kernel. Please help me
Sorry for my english
PS. in android after press OK in left side the almost all keyboard working (no working: a, q , shift, fn0
Hi, the 4 buttons - Call, End call, Start, and OK - have stopped working on my win mo device (kaiser aka tytn2, wm6.1). Keyboard backlight doesn't turn on when I press them. All other keys (including IE, messaging, both soft keys, and all the other keys on the device) are working though, and backlight is turning on with them. Maybe it's related to the fact that a few days ago after disconnecting this device from charging over usb it almost stopped responding so I had to reboot it (device was probably low on memory too just before reboting because of many programs running). Some time after rebooting I noticed exactly these 4 keys not working. Powering it off and on doesn't solve it, I have tried it several times. Trying to assign another action to OK or Start button didn't help too. Looks to me like soft problem still..
How can I find the cause of the problem and fix it thru some setts, user config, user cfg files, registry, etc?
Please help!
Edit: Also, is there a way I could test if Call, End call, Start or OK button is working at the lowest software levels that are possible (like in bootloader screen, etc.)?
OK
Hi there,
Yesterday I’ve received the Teclast X98 3G Tablet (Windows 10/Android 5, 64GC EMMC). After the first start I chose Windows 10 to start initially. Since then I am in a bootloop. Red logo flashes every 10 seconds, thereafter I can see a black screen with “9C” in the bottom right corner.
Have you experienced such a problem too? How can I reset the bootloader? Should I return my tablet, or is it just a small problem?
Thanks in advance.
Slay
Before turn on the tablet keep vol + and press power button then choose android to boot .
Thanks for answering.
Volume+ & Power doesn't work. Same loop as described above. I can only start the DNX-Mode.
Video demonstration: https://dl.dropboxusercontent.com/u/45730680/MOV_0001.MP4
connect keyboard with otg enter in bios load setup default save and restart if not solve your problem , hold power for 20 second for clean power off , charging tablet for many hour and try to restart
soudara said:
connect keyboard with otg enter in bios load setup default save and restart if not solve your problem , hold power for 20 second for clean power off , charging tablet for many hour and try to restart
Click to expand...
Click to collapse
Doesn't fix the problem. I`ve tried it with a full battery.
It looks like that after the red-logo disappears there is a command-window with the two letters "9C" in the bottom right corner.... I don't understand whats wrong there. Is it the dual-bootloader or Windows....?!
Is there an other opportunity to completely reset (factory reset) the device? Holding 20 sec. the power button ends in shutting off an starting the tablet again.
Should I try to flash Bios 2.02 or something else? I worry about loosing my Windows 8.1/10 key on this way. GearBest doens't respond to my ticket concerning return of device.
Thanks !
What about flashing mirek`s rom with partitioning in dnx mode with mft tool http://forum.xda-developers.com/showpost.php?p=62823546&postcount=6 ?
Android works well, but the Windows Boot Manager seems to be corrupted. I will send back the device. It must be a physical defect in the device. Overall it is well built and feels sturdy and android runs nicely. Therefore I hope that GearBest will send me a new one ...
Apropos GearBest: Ticket opened on Wednesday, no answer since now. I wrote a message on facebook directly and hope now for a quick solution because the device was "dead on arrival".
Thank you all for your answers / help!
Hello,
My Teclast X98 Air 3G(C5J6) arrived today.
When I start my Tablet it shows only the red Teclast Symbol with Chinese letters up.
And after that it Boots directly into Windows without showing the Dualboot Menu.
I started the Partitionsmanager and it shows a lot of different Partitions.
Two biggest are Windows (NTFS) with ~37 GB and another with 16GB (RAW) but windows tells me it's empty.
Should Windows recognize the correct Volume of the Android Partitions?
Is it possible to boot into bios and is it possible that something like fast boot into Windows or direct boot to Windows is activated?
Greetings drBob1337
After installing Win10 upgrade from Win8.1, my X98 boots directly into Android. So far nothing for support from Teclast.
Lloyd
to turn on the menu should be dualboot
- Turn off the tablet by holding the power button for more than 10 seconds.
- Hold the volume up and power button.
- Is due to open a white screen in the robot and start counting 10 seconds.
- In the upper left to see a small field and in the box to the right box. click on it to bring up the bird. then this screen will appear every time.