Database Develop

problem booting linux

when linux is booting it barks at me 'kernel panic - not syncing: VFS: unable to mount root fs'
any help?

FIXED! all I did was put initrd-*.*.*-hh2.gz from gnulinux.biz in the folder linux on the FAT32 partition.

Help with GNU/Linux -- Grub problems

I am trying to install MintLinux, but problem persists on normal ubuntu install disk.
Below is the output of fdisk
Code:
[email protected] ~ $ sudo fdisk -l
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xffffffff
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 13643 109478946 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 20048 77825 464101785 7 HPFS/NTFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 13644 20047 51440130 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc4ee2648
Device Boot Start End Blocks Id System
/dev/sdb1 1 121602 976759808 7 HPFS/N
I followed thisgrub install guide after the install from a live cd.
The problem is grub does not install after the OS install. Windows will load up automaticlly, the install is fine and I can see the files from the live cd.
Code:
[email protected] ~ $ sudo grub
Probing devices to guess BIOS drives. This may take a long time.
[ Minimal BASH-like line editing is supported. For
the first word, TAB lists possible command
completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub> find /boot/grub/stage1
find /boot/grub/stage1
(hd0,3)
grub> root (hd0,3)
root (hd0,3)
grub> setup (hd0)
setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 17 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+17 p (hd0,3)/boot/grub/stage2 /boot/grub/menu.lst"... failed
Error 22: No such partition
grub>
Above is the output of the guide for installing grub. It seems to file creating the grub menu.lst file, which is not found in the /boot/grub/ directory.
Thanks for any help.

Maybe your linux isn't using legacy Grub, (which would explain why you don't see the menu.lst file) it could be using grub2.
It works a bit differently.
http://www.dedoimedo.com/computers/grub-2.html
Edit--
Well if this is based off of Ubuntu 9.10 then it has grub2. It looks like there are 2 drives, which one has the windows install and which has the linux ?
Its possible they are both sata drives, and it's possible that you have the BIOS set to boot from the windows drive. (of course they could both be on the same drive).
I had a problem sort of like this, but I actually got the GRUB menu and then it would poo poo.

Linux deploy mounting problem !

hi
iam trying hard to get my linux working on my "galaxy note4 n910c KERNEL : 3.10.61-perseus-halaszk-V1.1" here is status :
memory :2900896 KB
swap : 1310716 KB
SELinux : yes
loop devices : yes
supported binfmt_misc : no
supported FS :cramfs exfat ext2 ext3 ext4 ...(etc..)
mounted system :unknown
running services
ssh :no
vnc : no
mounted partition on linux :
...no mounted anything
available mount points :
/system :0.3/3.5 GB (ext4)
/efs : 0.0/0.0 GB (ext4)
/cache :0.2/0.2 GB (ext4)
/data 12.1/24.6 GB (ext4)
/persdata/absolution : 0.0/0.0 GB (ext4)
/preload : 0.0/0.1 GB (ext4)
available partition :
/dev/block/loop255p1 : (linux)
"
and SElinux is "Permissive"
"
here is error after perssing "START"
"
mounting partition :
/... fail
"
i need it please!!!
prethanks for your answer
EDIT ONE : igot busybox and super su too

heeelllppp....

heeelllppp mee ... how to remove or replace this cyanogen_recovery again ..cwm Philz touch directly replaced automatically by cyanogen recovery after install cyanogenmod12 and I want to restore it to again because cyanogen recovery is not free to use ..
I've done all the way to replace, from install cwm of recovery and Odin but error all ..and I was trying way under any no results.
uo_a59 @ GT-N7000: / $ su
root @ GT-N7000: / # dd if = / sdcard / twrp.img of = / dev / block / platform / msm_sdcc.1 / by-name / FOTAKernel
dd: /sdcard/twrp.img: No such file or directory
1l root @ GT-N7000: / #
but instead NO SUCH FILE OR DIRECTORY ... please me why it happened. but already many twrp I have tried but the result is the same all ..
help me .. should immediately contact [email protected]

vykfly said:
heeelllppp mee ... how to remove or replace this cyanogen_recovery again ..cwm Philz touch directly replaced automatically by cyanogen recovery after install cyanogenmod12 and I want to restore it to again because cyanogen recovery is not free to use ..
I've done all the way to replace, from install cwm of recovery and Odin but error all ..and I was trying way under any no results.
uo_a59 @ GT-N7000: / $ su
root @ GT-N7000: / # dd if = / sdcard / twrp.img of = / dev / block / platform / msm_sdcc.1 / by-name / FOTAKernel
dd: /sdcard/twrp.img: No such file or directory
1l root @ GT-N7000: / #
but instead NO SUCH FILE OR DIRECTORY ... please me why it happened. but already many twrp I have tried but the result is the same all ..
help me .. should immediately contact [email protected]
Click to expand...
Click to collapse
Boot into your phone system and go into Developer Options. Uncheck the "Update Cyanogen Recovery" option

Remix OS player doesn't work

Hello. I can not install Remix OS player. When I try to install it shows an error. Please help me.
"ERROR: resizing partition e2fsck failed with exit code 8 .
emulator: WARNING: userdata partititon is resized from 550 M to 3900 M
Hax is enabled
hax ram_size 0xc0000000
HAX is working and emulator runs in fast virt mode.
audio: Failed to create voice 'goldfish_audio_in' qemu-system-x86_x64.exe warning: opening
audio input failed"
My PC specifications: Asus z87, intel i5 4670, gtx 770, 8 gb ram, windows 8.1 64 bit. Intel VT is enabled.