Database Develop

My Note not working

hi
My Note stop charging, stop working and can't use volume up + home + power buttons (every time restart)
My note not rooted and tried to install stock rom throw odin but every time failed.
after restarting it's give this message:
firmware upgrade encountered an issue. please select recovery mode in kies & try again.
Kies can't see my device.
I installed CWM recovery throw odin and the device restart with yellow triangle and not working.
any suggestion?

<ID:0/035> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000JPKJ4_N7000OJPKJ3_N7000XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/035> Odin v.3 engine (ID:35)..
<ID:0/035> File analysis..
<ID:0/035> SetupConnection..
<ID:0/035> Initialzation..
<ID:0/035> Get PIT for mapping..
<ID:0/035> Firmware update start..
<ID:0/035> boot.bin
<ID:0/035> NAND Write Start!!
<ID:0/035> cache.img
<ID:0/035> factoryfs.img
<ID:0/035>
<ID:0/035> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Are you repartitioning your device while flashing ?

Akiainavas said:
Are you repartitioning your device while flashing ?
Click to expand...
Click to collapse
no

How can I know that the rom is suitable for my device ?

Here you go:
http://forum.xda-developers.com/showthread.php?t=1424997
Use dr. ketan's list to get firmware for your device. In theory it's best to use the one that came with your phone - but honestly, every other should work. Choose one from directly rootable according to location/carrier your phone came from.

still not working, odin failed

First uninstall kies n install just driver from stock rom thread(same u hav mentioned in some above post). There is 32 n 64 bit drivers, install according your OS of pc.
Connect direct to pc, dont use extension cable, n preferably back side of pc
Put device in download mode (vol DOWN + home + power) once it will ask to continue, thn will enter in download mode
Now reflash rom.
Sent from my GT-N7000 using xda premium

i am using laptop Vista 32-bit system is that make difference?

May be, rwmove kies n just install 32bit driver
N try
Confirm your device in download mode
Sent from my GT-N7000 using xda premium

removed kies , re installed driver turned off antivirus with firewall
restart and try again with same message, failed

Have you put device in dowload mode?
Dont put rom file too deep inside folder. Just put in a folder on root directory.
If not works then try another pc at last option.
Sent from my GT-N7000 using xda premium

yes used the mobile in download mode
i will try another pc
thank you

have you fix your problem??? ihave the same situation,,pls help me

no not yet, someone advise me to use jig usb

Succeeded to download the rom and the device restart but get back to the first problem
freeze on galaxy note start screen

Dr-Ketan,
Could you tell me what could cause a phone to get stuck at factoryfs.img? Also my galaxy note can only mount to USB storage from clockworkmod, if I mount sdcard, it won't show up on the computer. So only USB storage can be seen in computer. Does this mean the sdcard is dead? Thanks.

Bricked Tab :(

hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)

epictwiglet said:
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
Click to expand...
Click to collapse
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.

i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works

bdfull3r said:
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
Click to expand...
Click to collapse
So i dont need the clockwork recovery mod files? just the stock recovery? and it wont boot to download mode so i cant connect it to odin unless im missing something, let me read it again.....

Ok! i have managed to get to download mode, i discharged the tab overnight and plugged it in this morning and he booted past the samsung logo, i cant remember what thread i saw that idea in but it worked. awesome, now to try and flash stock recovery, hope i dont duck it up!
Thanks guys, ill post again if it doesnt work @)

nirogu325 said:
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
Click to expand...
Click to collapse
all i get is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> recovery.img.md5 is invalid.
<OSM> End...
Booooo, now what? im using an old version of odin, so maybe ill try and new one?

Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.

epictwiglet said:
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
Click to expand...
Click to collapse
I am glad you have your tablet back in working order.
Well now that you have the stock recovery, you can attempt to flash the Clockwork recovery again the right way if you want to. You now know how to recovery your tablet if you have a brick again so you don't have anything to lose

hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
<ID:0/155> Added!!
<ID:0/155> Removed!!
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWMR5x_i957_recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.

Linkzz said:
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
Added!!
Removed!!
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CWMR5x_i957_recovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:155)..
File analysis..
SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Click to expand...
Click to collapse
If Odin recognizes the tab there is a chance to recover it. What rom are you trying to flash? Go to sammobile.com and get the stock gb rom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

i am using a stock rom from sammy roms but same problem
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I957UCLK4_CL1167230_REV02_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..

Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thats what i have been using; when i try with odin3 v3.07 its not recognizing the tablet

I know it doesn't make sense but keep trying to flash the rom. I've seen it not work for many tries and then it would for some reason. If odin recognizes the tab you are not hard bricked. You should be able to get it to operate again.
Also, use the gb Rom, uckj7
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

unable to Flashing CyanogenMod --- Error in /mnt/sdcard/cm-7.2.0-galaxysmtd.zip

Friends,
I am using samsung GT I 9000 phone..
I tried to update in using wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
I am able to install cynogen mode successfully but all my data was lost. During this installation I back up the data using recovery mode and backup & Restore option.
After successfully installing the cyanogenmode i rbooted the phone and tried to restore the data..but this time I face issues while restoring and on screen it shows an message ' error in flashing.. (Simllar of this)... After that I was unable to start my phone and it getting stuck at samsung galaxy s logo screen...
Then I again tried to install but this time whwn i 'Choose zip from sdcard' it start the istallation but throws an error:-
Error in /mnt/sdcard/cm-7.2.0-galaxysmtd.zip(status 7)
Installation abortd..
Can you guys help me on this???? I have attached the snapshot of the screen...

you won't be able to restore data from gb to cm7, not system data nor app data, so you need to reflash gb and start again
Here's my kit to do that quickly and easily, unzip and read.txt
http://db.tt/MOGZx01S
Credits to nitr8 and Chainfire

Thanks
Hi
Thanks for Help..I follow your kit and successfully started may phone..
thanks once again for help..

SetupConnection...
slaphead20 said:
you won't be able to restore data from gb to cm7, not system data nor app data, so you need to reflash gb and start again
Here's my kit to do that quickly and easily, unzip and read.txt
Credits to nitr8 and Chainfire
Click to expand...
Click to collapse
Hi!
I downloaded your kit. I am having the same trouble as ranejitendra.
I followed the Samsung_Galaxy_S:_Full_Update_Guide. But when it was time to reboot after installing CM9 i just went into a bootloop. When I tried to restore my backup it says it is successfully restored but when it reboots it just stops at the Samsung logo screen.
When I use the kit I firstly let it be in the logo screen and Odin recognizes it becuase the ID:COM turns yellow and says 0:[COM10]
Secondly I tried to start it in recovery mode. Same result. In downloadmode it is not recognized.
when I hit start this comes:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PDA-XWJVH.tar.md5 is valid.
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> EZbase-CSC-NEEJV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
Nothing happens after SetupConnection!
Any tips for me? I do not care about data or settings on the phone.
2 days ago I did this exact thing on S2 and it worked! I kept the files seperated as well...

jonnis said:
Any tips for me?
Click to expand...
Click to collapse
Just reboot Phone after pulling out battery, restart Odin and try again

xsenman said:
Just reboot Phone after pulling out battery, restart Odin and try again
Click to expand...
Click to collapse
Tried that a number of times with the same result. It just stays in Samsung bootscreen (without triangle) and Odin says <ID:0/010> SetupConnection..
And nothing happens...
Thanks for the tip though.
UPDATE: Read this post and got the phone working:
http://forum.xda-developers.com/showthread.php?t=1102881

[Q] Problem with format data

I installed tablet metrics with xposed installer. Then I used my phone normally for a few days and it started...
The phone started to reboot without reason. It just went crazy. I couldn't use it. Every time it turned on, 15 secs later started to reboot again. So I tried to uninstall xposed installer but didn't work. After doing that, my phone didn't boot anymore. It stayed in the "samsung" part. Then I went to recovery mode and did all the wipes possible, wipe cache, wipe factory reset, etc. Did everything but one, format data. And didn't boot. And as a last hope I did format data.
I shouldn't have done that.
Now I don't know what to do. Need some help, please.
I have installed the TWRP recovery. When I try to reboot it says "no OS installed". There is no way to install from TWRP a new OS ?
If you don't understand me or want me to add some more information just put it in the comments.
I don't speak english very well as you might know. Sorry.

Lele123 said:
I installed tablet metrics with xposed installer. Then I used my phone normally for a few days and it started...
The phone started to reboot without reason. It just went crazy. I couldn't use it. Every time it turned on, 15 secs later started to reboot again. So I tried to uninstall xposed installer but didn't work. After doing that, my phone didn't boot anymore. It stayed in the "samsung" part. Then I went to recovery mode and did all the wipes possible, wipe cache, wipe factory reset, etc. Did everything but one, format data. And didn't boot. And as a last hope I did format data.
I shouldn't have done that.
Now I don't know what to do. Need some help, please.
If you don't understand me or want me to add some more information just put it in the comments.
I don't speak english very well as you might know. Sorry.
Click to expand...
Click to collapse
You are on stock JB? Flash stock firmware with Odin. Do not flash I9070 firmware on I9070P phone, do not flash I9070P firmware on I9070 phone - IT WILL HARDBRICK phone - no more going back.
Odin how to: http://forum.xda-developers.com/showthread.php?t=1985398
Firmwares: samsung-updates.com sammobile.com
Do factory reset after.

shut_down said:
You are on stock JB? Flash stock firmware with Odin. Do not flash I9070 firmware on I9070P phone, do not flash I9070P firmware on I9070 phone - IT WILL HARDBRICK phone - no more going back.
Odin how to: http://forum.xda-developers.com/showthread.php?t=1985398
Firmwares: samsung-updates.com sammobile.com
Do factory reset after.
Click to expand...
Click to collapse
It doesn't work...
The Odin get's stuck in this part:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPZ_I9070SERLPZ_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
Thanks for your comment

Lele123 said:
It doesn't work...
The Odin get's stuck in this part:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9070XXLPZ_I9070SERLPZ_660490_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
Thanks for your comment
Click to expand...
Click to collapse
Does the size of downloaded firmware match the size written on the page when you start download? I think XXLPZ is one of the oldest FW, try LQL for example.

shut_down said:
Does the size of downloaded firmware match the size written on the page when you start download? I think XXLPZ is one of the oldest FW, try LQL for example.
Click to expand...
Click to collapse
I've tried with XXLQUE and XXLPZ, gives me the same error. I will try with LQL when the download completes

Lele123 said:
I've tried with XXLQUE and XXLPZ, gives me the same error. I will try with LQL when the download completes
Click to expand...
Click to collapse
Try other version of Odin too. 3.0.7 for example.

shut_down said:
Try other version of Odin too. 3.0.7 for example.
Click to expand...
Click to collapse
I did it with LQL, didn't work...

Lele123 said:
I did it with LQL, didn't work...
Click to expand...
Click to collapse
Maybe your phone have some hardware issue, you told that it was rebooting every 15 seconds. Better go to some service centre.

[Q] Galaxy ace odin problem

Help please!!!
Actually my galaxy ace GT S5830 is dead from the last 2 months. This happened when i flashed a custom rom.
The phone is not evening turning on ,no samsung logo, no boot logo,no boot loops,nothing( and thats whats i meant when i say "dead" )..
But the phone is getting detecting when the phone is connected to computer when i used the following trick as said by some member in other thread :-
"Take out phone battery, start odin with phone plugged in (battery still out) and load the files you need, hold the 3 button combo for recovery and insert battery whilst still holding the buttons (may need a second pair of hands to help), the phone should now be recognised by odin so hit start. ""
and yes the phone is being detected by odin (v3.01), When i load the pda file and click "START",
NOTHING happens. The process is struck at "setup connection" ..
Its been 30 minutes by now,and its still stuck at "setupconnection"..
Need help here!!! please
left side of odin show the following status :
<ID:0/034> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXMC1_S5830iODDLK1_RST_S5830iDDMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/034> Odin v.3 engine (ID:34)..
<ID:0/034> File analysis..
<ID:0/034> SetupConnection..

Galaxy ace odin problem
rgr117 said:
Help please!!!
Actually my galaxy ace GT S5830 is dead from the last 2 months. This happened when i flashed a custom rom.
The phone is not evening turning on ,no samsung logo, no boot logo,no boot loops,nothing( and thats whats i meant when i say "dead" )..
But the phone is getting detecting when the phone is connected to computer when i used the following trick as said by some member in other thread :-
"Take out phone battery, start odin with phone plugged in (battery still out) and load the files you need, hold the 3 button combo for recovery and insert battery whilst still holding the buttons (may need a second pair of hands to help), the phone should now be recognised by odin so hit start. ""
and yes the phone is being detected by odin (v3.01), When i load the pda file and click "START",
NOTHING happens. The process is struck at "setup connection" ..
Its been 30 minutes by now,and its still stuck at "setupconnection"..
Need help here!!! please
left side of odin show the following status :
<ID:0/034> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXMC1_S5830iODDLK1_RST_S5830iDDMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/034> Odin v.3 engine (ID:34)..
<ID:0/034> File analysis..
<ID:0/034> SetupConnection..
Click to expand...
Click to collapse
why you try to flash S5830i stock ROM on S5830 Model? Try to flash S5830 stock ROM.
maybe the original problem was you flashed wrong ROM.
daniga74

daniga74 said:
why you try to flash S5830i stock ROM on S5830 Model? Try to flash S5830 stock ROM.
maybe the original problem was you flashed wrong ROM.
daniga74
Click to expand...
Click to collapse
well,actually ,i couldn't find a one package rom for S5830.

rgr117 said:
well,actually ,i couldn't find a one package rom for S5830.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
you must register and then download stock firmware

Odin
And there is odin and ops file for s5830 in attachments

Galaxy ace odin problem
http://live.samsung-updates.com/index.php?device=GT-S5830

Hi There,
Well you might have flashed the incorrect stock rom for your deivce . Get the appropraite version of rom for your device and also sorted by the Country you are in.
Happy Flashing
Good luck
firmware:
www.sammobile.com/firmwares