Database Develop

Is my Blackstone Dead?

Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot

tararura said:
Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot
Click to expand...
Click to collapse
Remove the battery put it back hold the volume down button and turn your device on. now you should be in bootloader modus and now flash a shipped rom for your device.

tararura said:
Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot
Click to expand...
Click to collapse
Don't miss HSPL ......

Thanks guys
I can enter bootloader screen with usb at the bottom. But can not flash anything, it just sits at 0%. SPL is 1.54.

Do you have a file called blacimg.nbh on your sd-card? Obviously you can't check, so i would remove the sd-card as well and try again. If successful flash via uspl.

Thanks ATi75
I was already reading USPL and used it and voila. Its alive again. Nothing else worked. Now I will always use USPL.
Thanks again

Glad it worked out! Had a similar experience a few weeks back. Not something i want to experience again for a long while

I know. I wasted around 3 hours and lost lots of my hair.
Thanks again

tararura said:
I know. I wasted around 3 hours and lost lots of my hair.
Thanks again
Click to expand...
Click to collapse
do you have tested mtty?

Phone Struck on Tri Color Screen

Hello Guys,
I'm not sure if this is a right place to ask this question, but X1 is struck on tri color screen. Didn't do anyting, but since this morning... it's just not turning up.
Whenever I boot it up... shows tri color screen & say "loading"... cums back saying no image file & then again shows as following
KOVS110
SPL-0.78.0000
MicroP1-787
Microp2-707
Not sure if anyone else had this problem, but I'd appreciate if you can direct me to a place where it's already been fixed by someone else!
Thanks
Sachin Ghai

Try removing the battrey and wait for 10 seconds...if that helps ok, otherwise, U go in thr tri bootlader screen YOURSELF, (volume down+ power button) Do nothig, just go i the mode and come back..AGAIN< IM NOT AN EXPERT..IM JUST TRYING TO HELP U WITH UR PROBLEM....PLZ TAKE AN EXPERT'S ADVICE..
boLUCK!

Did the exact same thing...still struck at tri color screen...
All SM & Experts..I request you to get me out of this trouble..
Thanks in Advance

try to plug it to your computer via usb.. it happened to my diamond once.

I've already mailed you this
Hallo Sachin,
read the first post of this: http://forum.xda-developers.com/showthread.php?t=431218
You can use two methods, first your pc synced with your device and second the microsd procedure. i prefer the last one.
Here's the procedure for microsd: http://forum.xda-developers.com/showthread.php?t=445662
After you have done this, you can flash any rom you like, read this: http://forum.xda-developers.com/showthread.php?t=446070
So basically what you do is:
1) download hard spl
2) place it on a microsd card ( put it back in your device)
3) Hardspl from microsd ( is also in tricolorscreen)
4) Now you have hardspl'd your device.
5) download a preferred rom
6) put it on the microsd card
7) Flash.
Now your device must work again.
If you have any questions, mail me.
Greetz

If you are trying to flash a custom ROM you need hard-SPL. Follow the instructions the guy above gave to you.
Cheers!

cristidotro said:
If you are trying to flash a custom ROM you need hard-SPL. Follow the instructions the guy above gave to you.
Cheers!
Click to expand...
Click to collapse
I'm not trying to FLASH rom. I'm that techie to do all this.....However... thanx for ur efforts guys...Fortunately...the bootloader came in to normal mode & booted up in normal way... however I'm scared to off it again, as I'm not sure if it'll turn up in normal way again or not.
What do you guys think?
SHALL I HARD RESET or SOFT RESET my phone? WIll either of these solve the problem?
I don't want to play with ROM thing.... just lil scared not to turn my x1 in useless crap..

Help! My Diamond cant boot and i want to flash it to Original

Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!

Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...

krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP

Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).

I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659

MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed

Help, failed update

hi guys
My phone was updating to 2.1 when it crashed and now all that apears is a black screen with some strangs commands.
I try hard reset and nothing, and when i put it in to Download Mode my pc detects it but KDZ dont.
Can u help so i dont sent it to warranty?
Thx

SGS I9000 Hard Bricked? Is there solution? Help please!

After my last attempt to put some ROM to keep a stable, result is the following - when i try to go in "Download Mode" , at the top left appears a text "KeyPressed,1". I search here, in Google, but nothing.. I think my phone is HARD BRICKED I'm asking for your help, i know you are erudite people, and only you can help me! Thank you, for listening my problem! Thank you!

So am I right that you can't boot your phone? What happens when you turn on your Phone ? Bootloop?

KUN1 said:
So am I right that you can't boot your phone? What happens when you turn on your Phone ? Bootloop?
Click to expand...
Click to collapse
Ive got the exact same problem
Ill explain my problem in more depth
phone bootsup and flashes a pic of the android then goes into recovery mode so cant geto normal phone operations
under advanced , log it says checked for extendedcommand...skipped exection of extendedcommand, file not found...
other interesting thing to note center button does not work ie using only voulume and power switch but the touchscreen back button works
when I try to put in dl mode it does show yellow android but has keypressed,1 on screen as well ,
Computer knows that devise is there but doesn't show it up and Oden 1.7 sometimes picks it up but doesn't successfully update files says it failed
Thanks for your interest

have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1