Database Develop

NEED HELP!!! Screen black!

I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!

Please HELP!

EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.

I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.

EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.

I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...

Up?
What can i do? Is a batterie problem?

Let your Tab charging for 5 Hours and then try again.

Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.

now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today

@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "

HELP please? Can i do a custom jig for the galaxy tab? And How?

press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min

suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.

Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead

Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App

help bricked phone

Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.

You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.

See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA

http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA

DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...

Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.

gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.

What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA

Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.

Soft Bricked GSM Galaxy tab (phone---!---computer symbol(

my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!

sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom

First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app

Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.

tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.

What about a Tab P1000N? What can be done with that one?

One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.

priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.

You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good:

Bricked captivate help please!!

i have bricked my step dads captivate. i put Cyanogenmod 9 on his phone he has been using it for a while now but he wanted to go back to the stock rom that came on the phone. i made a back up before i installed cm9 but when i was restoring it back to stock it said error restoring boot image then stopped so i tried it again the it went black. now every time i try to turn it on it gets stuck at the at&t world phone screen and wont do anything. so i made a jig to get it into download mode so i could flash it back to stock. but now on my widows 7 computer it says usb device not recognized. it gives a error code 43, and says device has malfunctioned. i have uninstalled the drivers and reinstalled them but the same message keeps popping up. i don't know what to do now im all out of ideas and i cant find anything that relates to my problem anywhere on the internet. please someone help me!!!

See the Captivate Connection Issues and Download Mode Help stickied thread in the General Forum.
Also u could try one of the Heimdall One Clicks instead of Odin.......see the stickied thread in the Dev Forum of the Master Collection of Stock Rom One Clicks.
Sent from my SAMSUNG-SGH-I897 using xda premium

No one tells you that you can't restore a factory image from CWM... but as you have seen, you can't. :thumbup:
Sent from my aokp_tenderloin using xda premium

seen this just few days back.... if you get stuck at the at&t screen, phone is soft-bricked and you dont need a jig to solve that problem.
I was under similar impression first, then read a post about a ROM installation and found out that to get to download mode, you can hold both the volume buttons and connect the phone to the usb with computer (phone initially is turned off) ... dont press the power button... this will give you download mode.... once in download mode ODIN to stock, root, flash to any ROM that you like by carefully following the instruction to "T".
i couldn't post outside link but look for captivate wikia download mode on google. it will give you a site with all options of bricked phone and solutions.

[Q] HELP ME unbrick samsung galaxy S i9000 please! nothing works- kies,odin,adb,

Hi,
I am sorry to post this topic but i badly need some experts to help me out with this. It would be very grateful if anyone of you could help me.
I have bricked my friend's samsung galaxy s i9000. Now i need to buy a new phone for her incase i dont get this one working.
I have searched on this forum and googled extensively, i tried almost every method on this forum to unbrick except the USB jig, all of them failed.
I have ordered USB jig online, and it is yet to be delivered to me. So that method is yet to be tested.
Meanwhile all i want now is some guidance, so that i could be self assured if what I am doing is right and i need some questions answered.
Please read the following to comprehend the entire problem.
1) The phone has froyo and it was working very slow, and i couldnt boot into download or recovery mode via 3 button combo. (why couldnt i boot into those modes?)
2) I connected the phone to samsung kies, and it said that there is an upgrade available. But the details for the upgrade were blank.
I went ahead and tried upgrading it, and it gave me 403 error. (why did it give null details of the upgrade firmware? and why did i get 403 forbidden access error? )
3) Next i connected to the phone via ADB, and i could successfully boot into download mode.
4) After booting into download mode, i connected it to odin. Then i tried flashing semaphore kernel v2.7.
I gave an error, write operation failed, and the flashing failed. (why did it happen?)
5) Next I couldnt boot the phone at all, I am stuck at the black screen of death aka bsod or the phone-!-computer screen.
6) I tried taking out battery, reinserting and tried severl combination of button to boot as explained at several places here, but none of them works. Neither am i able to connect it to odin, or adb.
WHAT SHOULD I DO NOW? IS IT HARD BRICKED OR SOFT BRICKED?
WHAT SHOULD I DO INCASE I AM ABLE TO BOOT INTO DOWNLOAD MODE USING USB JIG?
WHAT SHOULD I DO INCASE I AM NOT ABLE TO BOOT INTO DOWNLOAD MODE USING USB JIG?
Please help me, it will save me a new phone cost. I can hardly afford it.

http://forum.xda-developers.com/showthread.php?p=30415128 follow the link it may help
Sent from my GT-i9000 using xda premium

I have already tried all this.
can you answer my questions?

http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=pKS6zEkIydM&list=UUawwqTCK5egDfXdJe3EH0XQ&index=14
http://www.youtube.com/watch?v=PwHVm90HO1w&list=UUawwqTCK5egDfXdJe3EH0XQ&index=18
http://www.youtube.com/watch?v=6GJUcQl3wr8&list=UUawwqTCK5egDfXdJe3EH0XQ&index=16
if your still stuck check out darkyrom.firstaid

http://forum.xda-developers.com/showthread.php?t=819551 read this

a big thanks foe all above links..
I am still trying and waiting for the jig. i hope to get it working..

Was the phone rooted? I've had problems with rooted apps deleting system files.
Sent from my GT-S5830 using xda app-developers app