Database Develop

[Q] Dark Knight V4

V4 was released today and I have the following questions:
1) Download link not working
2) Does the modem have better wifi reception
3) Are there any included launchers
Thanks

1) http://www.mediafire.com/?3d6da7j5i306v7u - That link works.
2) Test different modems and see which you get the best with, at the minute my best is JVU.
3) Probably not, check? Also you can get more from the market / on here.

Charis.sh said:
V4 was released today and I have the following questions:
1) Download link not working
2) Does the modem have better wifi reception
3) Are there any included launchers
Thanks
Click to expand...
Click to collapse
2. All Dark Knight Roms got no Modem pre installed. If you got a modem, u will keep it after flashing from ur earlier installations.
3. Try Nova Launcher or Apex Launcher from market.
Dark Knight rom got an pre installed Nova Launcher and this one runs very smooth (except the sporadic rom bugs )

TV
someone can say if digital tv is working in dark knight 4?

Schlabbernr1 said:
2. All Dark Knight Roms got no Modem pre installed. If you got a modem, u will keep it after flashing from ur earlier installations.
3. Try Nova Launcher or Apex Launcher from market.
Dark Knight rom got an pre installed Nova Launcher and this one runs very smooth (except the sporadic rom bugs )
Click to expand...
Click to collapse
In this case how can I flash KB3 and where can I find it?
Also would you suggest formatting to ext4 and how should I do it so that I don't lose anything?

Hey guys, i flashed V4 and now my phone is stuck at the bootanimation (i had it booting for 20 min). I did a full wipe, wiped cache, wiped dalvik and even tried to reflash. Any suggestions?
edit: i got it working after 3rd reflash

I didnot like it.....

My suggestion: wait for an update
I have tried switching from V3 to V4 yesterday. I encountered problems with Titanium and GPlay kept FCing so I returned to my backup of the stable V3.
V4 was rushed out so I´m waiting for the next update.

Charis.sh said:
I have tried switching from V3 to V4 yesterday. I encountered problems with Titanium and GPlay kept FCing so I returned to my backup of the stable V3.
V4 was rushed out so I´m waiting for the next update.
Click to expand...
Click to collapse
Did you directly flash the ROM ? In that case you may face FCs often.
Better take a nandroid backup.
wipe cache and data
flash the rom
Rebot and let the phone start
Go to recovery and then from backuo and restore -> advanced restore -> select the backup you did -> restore data
I moved from Elite V7.1 to Dark Knight 4 and dint face any such issues.

in my case titanium crashed while restoring and couldn't complete the process.I think I'll stay on gb rom all the way till a gb-stable-and-smooth- like ics rom comes out.

twisturandroid said:
Did you directly flash the ROM ? In that case you may face FCs often.
Better take a nandroid backup.
wipe cache and data
flash the rom
Rebot and let the phone start
Go to recovery and then from backuo and restore -> advanced restore -> select the backup you did -> restore data
I moved from Elite V7.1 to Dark Knight 4 and dint face any such issues.
Click to expand...
Click to collapse
I did a backup of DK V3 to which I returned.
I wiped dalvic cache, data and cache and then flashed. I will try again and see what happens

i have a SGS i90000b with ics 4.0.4 CYANO XI.I
i wanna use this ROM from dark knight and i need to know if i can just instal from CWM without chance my kernel or i need install other kernel too?
if i need chance what kernel i have to use?

marcospbs said:
i have a SGS i90000b with ics 4.0.4 CYANO XI.I
i wanna use this ROM from dark knight and i need to know if i can just instal from CWM without chance my kernel or i need install other kernel too?
if i need chance what kernel i have to use?
Click to expand...
Click to collapse
I think it includes the devil kernel because I when i flashed V3 over stock ROM it changed to Devil Kernel

Stability
I can confirm that Dark Knight v.3 is much more stable than v.4.
Upgrading to v.4 I found these bugs:
1) After the first reboot I activated the wi-fi toogle and it started to switch on and off repeatedly. The system error that appears every time forces you to reboot the device.
2) Many users reported problems with titanium backup (I didn't try it)
3) Trying to move an application to USB (SD) causes a hotboot ( !!!! )
4) The new "Dark Knight" application crashes if you try (f.ex.) to install a new theme or a new battery icon ... after this crash you can no more change the battery icon from the ROM control menu.
I upgraded from Dark Knight 3, wiping everything before flashing as recommended. I made a second try upgrading from the original gingerbread 2.3.3 by Samsung (and wiping everything of course). The result was the same in both cases.

Stable DK4
If someone has flashed a stable DK V4 pls post the procedure that you have performed

Thought of going after this rom. But its better to wait for some better version in future with lesser bugs
Sent from my GT-I9000 using Tapatalk

verma_nis said:
Thought of going after this rom. But its better to wait for some better version in future with lesser bugs
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Agree, this v4 versión is near to unusable for now, hope next version will be much better

[Q] Wifi issue after install Devil 2.0 kernel

Hi all,
My phone now is using Dark Knight 3 rom with Devil kernel 1.1.6b
After upgrade my kernel to Devil kernel 2.0, i found that my phone wifi is connected, but no internet..
any idea?
thanks

did you wipe dalvik cache?

chepui said:
did you wipe dalvik cache?
Click to expand...
Click to collapse
yes, had wiped it too...wifi also so connected, but no internet..
but while reinstall back devil kernel old version, no wifi issue

me too. the same probleme
please help

Nessasary to wipe dalvik/catce when installing kernal?

I ask this as I installed a new kernal hydrocore over cm9 kernal (LATEST) and it seemed to work fine but Today my phone so slow and sluggish. It said I didn't have to wipe anything but can it help to wipe anything? Some people say it does.
Cheers
Sent from my GT-N7000 using XDA

The developer always knows the best.
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

Okay someone sugessted you can wipe the dalvik etc with no issues so due to me finding the hydro kernal abit freezy I did a dalvik wipe and catch and then flashed the cm9 stable release kernal and now it boots up but does not get pass the paranoid android screen?? I've done many reboots but it stays at the amination screen lol why did I even trouble it ahhhhhh
What can I do? Iam running cm9 paranoid android rom and the cm9 kernal was flashed before screen got stuck!
Cheers

[Q] Why SdCard Scan is so slow and freezes on Stock ICS Rom?

Hello my friends!
I don't know why but I know it is so annoying! I am now on Django Manouche 1.2.1 with KoB 0.3 NoOC kernel and even I changing kernel, rebooting in recovery to wipe cache and dalvik cache, unmountig/mounting sd card and other things i can do, scan sd card freezes at 90% and I can't open LG cam app due scan in progress.
Will be a Rom Issue? I hope not!
I've tested LG ICS stock rom on LG Optimus Black and this f**cking issue doesn't occurs there.
So... If u know some trick or solution that is not a magic, please tell me because I can't stand anymore! :laugh:
Thanks!

cl06 said:
Hello my friends!
I don't know why but I know it is so annoying! I am now on Django Manouche 1.2.1 with KoB 0.3 NoOC kernel and even I changing kernel, rebooting in recovery to wipe cache and dalvik cache, unmountig/mounting sd card and other things i can do, scan sd card freezes at 90% and I can't open LG cam app due scan in progress.
Will be a Rom Issue? I hope not!
I've tested LG ICS stock rom on LG Optimus Black and this f**cking issue doesn't occurs there.
So... If u know some trick or solution that is not a magic, please tell me because I can't stand anymore! :laugh:
Thanks!
Click to expand...
Click to collapse
Mate, just try with another memory card or just make a backup of this memory card and format it..and then try..
Sent from my LG-P990 using xda app-developers app

deleted

BSOD on custom rom - [Solved]

On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
SOLVED - Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.

g3ar said:
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
Click to expand...
Click to collapse
You should consider trying Pengus' CM10 ROM. I don't think you can find more stability in custom ROMs than his
You'll love the ROM, just give it a chance
But remember to do a full wipe (wipe system, data, cache and dalvik) before flashing the ROM.
Edit: You'll also find out bluetooth works perfectly fine on his ROM where the more recent ROMs don't have this fully functional.

So theres no fix type what shoud i do ?
Baseband 1035,21_20121130 . Kernel 2.6.39.4

Strange, BSODs should be a thing of the past. In most cases it was the kernel. Are you sure you flash the latest ROM versions with latest Kowalski kernel? Try to flash KK after ROM. If it doesn't help, phrase describe the problem more thoroughly. When is BSOD happening? During call?
Sent from my LG-P990 using xda app-developers app

So on stock v30a i dont have problems at all. I use aio toolkit option 4 .then install THE ROM tonyp. Bsod happens when i apply charger

Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
Sent from my LG-P990 using xda app-developers app

Man it looks like you solved my nightmare ! THANKS

Hi there,having similar problems using cm10.2 and all roms ,When phone times out its battery removal time,hot plug enabled but still turning off!Any help would be much appreciated thanks Glenn