[Q] Wrong Kernel - Captivate Q&A, Help & Troubleshooting

Under settings is reporting wrong kernel and no baseband. I recently flashed back to stock and then to a few roms. my bootanimations always shows semaphore kernel when booting up altough i have used roms with icy glitch and now flashed corn. My settings/about still refelect sema kernel so do the boot animations. The semaphore kernel came from the first rom i flashed about go back to stock. It seems stuck on there somehow. any ideas?

ODIN
Hey there! To me it sounds like you need a complete wipe through ODIN. Find any ODIN ROM (Darky ROM is the one i am most familiar with) and flash the Odin Package with the "wipe" option ticked. This will clean up your phone entirely (except for SD card, so you can backup your apps to that with titanium backup) and flash it, works wonders =) Good luck! Let me know if you need any help with ODIN

Related

[Q] Custom ROM with custom kernel, few questions.

Hi! I'm planning to install custom rom on my sgs gt-i9000 by Darky (either 9.5 or 10 RC).
But Darky uses DarkCore as kernel, and I want to use speedmod kernel (as I understood this one of the best kernels out there).
What is the right process to install this?
Flash the kernel via odin (PDA right?) the use Darky's Rom Configuration with "Skip Kernel" and then use recovry to install the ROM?
Also can I stay with my current modem which is I9000XXJPY? I really afaird to flash the modem (and CSC).
One last question is how to backup my current kernel/modem/csc/rom?
Also as I understood I need to backup /efs right? Is there something else I need to backup (my contacts are saved on the sim card so I dont mind loosing those and I dont mind loosing my current applications and their settings).
Thanks a lot!
if you are not rooted, get rooted !!
download CF-Root, or speedmod kernel, flash it through ODIN and make a full nandroid backup. Also backup efs just in case your IMEI gets corrupted.
i have used speedmod kernel with older versions of darkys roms, but voodoo kernel is recommended.. But you can try which ever kernel you like, providing you know how to fix if something goes wrong.
you can skip modem in the darky app if you are happy with your current modem.
and once you install cf-root or speedmod you will be rooted, so download 'titanium backup' from the market and that will back up all your apps
1 last thing, i cannot emphasise this enough.. be sure you know how to fix a bricked phone before going ahead with the flash. i myself - along with many others - have had 'issues' with darkys roms.... I am not saying you will, but be careful and always have a current backup !!
DarkCore is based on Voodoo kernel right?
1 last thing, i cannot emphasise this enough.. be sure you know how to fix a bricked phone before going ahead with the flash. i myself - along with many others - have had 'issues' with darkys roms....
Click to expand...
Click to collapse
I dont know. What should I read?
Thanks!
yes it is
and read this http://forum.xda-developers.com/showthread.php?t=723596
if you ever get stuck in a bootloop, boot into recovery do a factory reset.
if you have serious issues, boot into recovery, do a factory reset along with formatting, cache / data / system, then re flash.
if you have even more serious issues, then you need to boot into download mode and flash a 3 file stock rom with 512 pit and re-partition checked.
thats all there is to fixing a bricked phone. Always make sure 3 button combo works before taking on any sort of flashing.
Thanks a lot!!

[Q] Unable to change Roms without going to stock

having a wierd problem, as the title says i am unalbe to change roms and have it boot.ever since i flashed the ROGERS 2.3.3 (containing i896 ROGERS bootloaders)
no big surprise i didnt like it.
while reading this keep in mind i have alot of experience flashing, and yes lagfix was disabled!
odin flashed a CWM kernel (one was using before rogers)
restored Nandroid. (of before ROGERS)
stuck at kernel screen
Flashed different kernel compatible with rom.
stuck at kernel screen
Loaded CWM to flash a custom rom.zip
flashed OK
reboot stuck at kernel screen
Odin flashed i9000 gingerbread (with i9000 GB bootloaders) from few months ago
stuck at kernel
Odin flashed ROGERS 2.1 eclair stock.
stuck at kernel
Odin flashed ATT one click
SUCCESS!!
Odin flahsed Rogers 2.1 eclair
SUCCESS!!
ODIN flashed i897 ATT GB bootloaders
ODIN flashed CWM kernel CWM flash ROM
Restore NANDROID
SUCCESS!!
finally back to normal...**never flashing rogers 2,3,3 again!
or so i thought.
got bored and went to flash a different ROM
STUCK AT KERNEL
had to repeat all above steps!! ALL before it was back to *normal* again
any thoughts to what got permanently messed up????
Did you try reformatting system and cache before flashing a new ROM in cwm? (i'm just guessing here)
yes and the Odin one click re-partitions - wiping everything known.but still the problem exists after flashing my 1st custom rom i am unable to boot into a second ANY rom (stock or custom)
and this is VERY frustrating as i just finnished my own custom ROM and am unable to quickly flash test versions.!!
I don't know. Odin one click should have fixed everything. Did you master clear/reformat the internal Sd?
no not the internal sd.
also i remembered at one point right after being on ROGERS stock 2.3.3
the first rom i tried flashing was a custom build I made with a kitchen tool using cygwin.
anyways after flashing and failing, i noticed the update script i created flashed the zimage to 2 different dev/bml blocks!! one i never seen before.
i stopped using that kitchen tool but is it possible it flashed something to a dev block that odin one click isnt clearing? but it repartitions. that should clear EVERYTHING!
still my problem presists...
flashing issues. cracked screen. might be time to buy a new phone.....
You could use Heimdall to dump your partitions and find out.
Heimdall print-pit...in case u didn't know
Sent from my SGH-I897 using xda premium

Badly stuck in bootloop

Okay,
So i have searched, I was on 2.3.3 custom rom, and then i went on to flash Onecosmic's ICS Port Android 4.0.3 RC1, i flashed the kernel first and then from then on i cant go past flash screen. I tried flashing official firmware from here "I9000DXJV9_OLBJV9_DXJV9" but it wont go past flash screen. any help??? Can somebody link me to full official rom with bootloader and everything.??
register at sammobiles.com and find your firmware there, then flash it through ODIN. Then flash your KERNEL then any custom rom. If you find bootloop, you will need to flash a voodoo kernel this gives you other options in CWM to enable you to disable ALL lags. Then you should be fine. You can reflash any other kernel once your all done.
buttwad said:
register at sammobiles.com and find your firmware there, then flash it through ODIN. Then flash your KERNEL then any custom rom. If you find bootloop, you will need to flash a voodoo kernel this gives you other options in CWM to enable you to disable ALL lags. Then you should be fine. You can reflash any other kernel once your all done.
Click to expand...
Click to collapse
Ok i will try find out a vooddoo kernel, but if you please can link me to it, it will be very easier
Ok i flashed the voodoo kernel and from CWM i disabled the lagfix. And then again i i got the same error, "failed to mount /dbdata" after flashing through odin. And again back to bootloop.
What do i do.
Thankfully i can get into recovery menu. And i tried restoring nand backup but i got an error flashing boot image.
What's the next step
Try this. Remove BOTH external sd card and sim card. Boot to recovery, goto mounts/storage and format sdcard, back to recovery head menu, factory reset/wipe, format cache/format dalvik cache then remove battery, boot to doenload and flash rom agin with odin
Oh, and dont forget to disable ALL lagfixes BEFORE odin flash.
i had the same problem yesterday, what i did is i flashed through odin some 2.2 froyo (3 files) with repartition and the problem was solved; the rom was pre rooted JP3 ; hope it helps you
grzana1234567 said:
i had the same problem yesterday, what i did is i flashed through odin some 2.2 froyo (3 files) with repartition and the problem was solved; the rom was pre rooted JP3 ; hope it helps you
Click to expand...
Click to collapse
Please can you link me to it, i can't find 3 files rom.

[Q] Nand backup question involving ICS and JVU

So here's the scenario;
I'm currently on an odexed JVU rom. My CWM is version 5.0.2.7.
I would like to flash an ICS build soon, haven't decided between CM9, AOKP build 33, a derivitative of an AOKP build or Slim ICS (as i understand, a rom of its own with highlights of CM and AOKP).
I was wondering, if i flashed one of the aforementioned ICS roms and for some reason wanted to return to my current JVU rom, could i just restore a JVU nand backup in CWM in the ICS rom, or would i have to reflash stock JVU, then semaphore kernel (that's how you install the JVU rom in the first place), then restore my JVU nand backup.
And if i can restore my JVU nand backup on an ICS rom, is it only possible some roms or a specific kernel with a version of CWM 5 built in?
I don't know whether restoring nand backup over some other rom works or not (I think I tried once but it didn't work) but I would suggest first flashing the JVU with the kernel of your choice and then restoring the backup.. this will give you your previous configuration without any problems..
coolio
just wanted to see if i could avoid odin, my micro usb port on my phone is a little loose and it isn't a problem really when charging or transfering but i'd be in tears if something went wrong during an odin flash because my usb cable was jiggled
Zorigo said:
coolio
just wanted to see if i could avoid odin, my micro usb port on my phone is a little loose and it isn't a problem really when charging or transfering but i'd be in tears if something went wrong during an odin flash because my usb cable was jiggled
Click to expand...
Click to collapse
downgrade to GB by flashing CM7 through recovery.. you'll have to flash twice.. first flash and reboot recovery and then flash again.. ofcourse with wipe the first time atleast..
then flash JVU through recovery
Did not know that! That could have caused some problems, thanks a bunch for letting me know

[Q][SOLVED] How do I flash an other JB ROM if my phone only lets me download mode?

Hi, yes, this is Dog.
No, seriously, today I tried to flash semaphore kernel 2.2 (JB) to my Jelly Bean Port Rom , wich came with Devil's kernel. When the instalation finished the phone rebooted and now it gets stuck with the Semaphore's kernel screen.
Recovery doesn't work.
Download mode DOES work.
I don't know too much about bootloaders and deeper stuff.
So, what shall I do? I just downloaded Tsunami's AOKP JB ROM, but its a .zip and Odin only allows .tar.. And I dont have a nand backup with JB (i have it with ICS)
Help me! please!
SOLVED: Flashed Devil's kernel back with Odin. Then reflashed the rom with CWM.

Categories

Resources