Badly stuck in bootloop - Galaxy S I9000 Q&A, Help & Troubleshooting

Okay,
So i have searched, I was on 2.3.3 custom rom, and then i went on to flash Onecosmic's ICS Port Android 4.0.3 RC1, i flashed the kernel first and then from then on i cant go past flash screen. I tried flashing official firmware from here "I9000DXJV9_OLBJV9_DXJV9" but it wont go past flash screen. any help??? Can somebody link me to full official rom with bootloader and everything.??

register at sammobiles.com and find your firmware there, then flash it through ODIN. Then flash your KERNEL then any custom rom. If you find bootloop, you will need to flash a voodoo kernel this gives you other options in CWM to enable you to disable ALL lags. Then you should be fine. You can reflash any other kernel once your all done.

buttwad said:
register at sammobiles.com and find your firmware there, then flash it through ODIN. Then flash your KERNEL then any custom rom. If you find bootloop, you will need to flash a voodoo kernel this gives you other options in CWM to enable you to disable ALL lags. Then you should be fine. You can reflash any other kernel once your all done.
Click to expand...
Click to collapse
Ok i will try find out a vooddoo kernel, but if you please can link me to it, it will be very easier

Ok i flashed the voodoo kernel and from CWM i disabled the lagfix. And then again i i got the same error, "failed to mount /dbdata" after flashing through odin. And again back to bootloop.
What do i do.

Thankfully i can get into recovery menu. And i tried restoring nand backup but i got an error flashing boot image.
What's the next step

Try this. Remove BOTH external sd card and sim card. Boot to recovery, goto mounts/storage and format sdcard, back to recovery head menu, factory reset/wipe, format cache/format dalvik cache then remove battery, boot to doenload and flash rom agin with odin
Oh, and dont forget to disable ALL lagfixes BEFORE odin flash.

i had the same problem yesterday, what i did is i flashed through odin some 2.2 froyo (3 files) with repartition and the problem was solved; the rom was pre rooted JP3 ; hope it helps you

grzana1234567 said:
i had the same problem yesterday, what i did is i flashed through odin some 2.2 froyo (3 files) with repartition and the problem was solved; the rom was pre rooted JP3 ; hope it helps you
Click to expand...
Click to collapse
Please can you link me to it, i can't find 3 files rom.

Related

Can Darky or any pre-rooted Rom be Flashed via odin?

Hi
Maybe I didn't search very well but I have a question that seems very stupid...
With Odin, is it possible to flash a custom rom?
I mean the rom that i use normally flash with voodoo on the recovery mode can't bee found by odin...
Thing is that i've got the corrupted memory problem and acted to fast and flashed the stock 2.2 firmware from bell....now i'm stuck with 3e recovery...
If I could flash to a pre-rooted rom with CWM or Voodoo it would be better i thing if i want to try some manipulation with adb
Teranox said:
Hi
Maybe I didn't search very well but I have a question that seems very stupid...
With Odin, is it possible to flash a custom rom?
I mean the rom that i use normally flash with voodoo on the recovery mode can't bee found by odin...
Thing is that i've got the corrupted memory problem and acted to fast and flashed the stock 2.2 firmware from bell....now i'm stuck with 3e recovery...
If I could flash to a pre-rooted rom with CWM or Voodoo it would be better i thing if i want to try some manipulation with adb
Click to expand...
Click to collapse
I haven't confirmed this or searched but I think it's because you have voodoo enabled, this format is ext4 which is a linux format and can't be seen on windows unless you ahve some 3rd party software installed. Just boot into recovery and disable the voodoo, this will put your phone back to the normal format and odin should recognize it.....i'm totally guess here since i haven't tried it but I think this would be the cause
Darky's ROM is meant to be flashed via Clockwork recovery and can not be flashed by odin, darky's comes in a zip file and odin only uses .tar extensions

[Q] ROM Update gone bad, what to do ?

Hi,
Here's my story, I was running stock Froyo 2.2 on my Samsung Galaxy I9000 (India) and decided to give latest SpeedMod kernel (speedmod-kernel-k13e-500hz.tar) a try, things went well and I flashed the kernel successfully via ODIN. After this I went ahead and enabled all recommended tweaks and lagfix (both data and system) this also completed successfully.
Now problem started when I followed this guide and did something wrong (I guess), I skipped the "Flashing SpeedMod Kernel" step as I was already on that and disabled the lagfix (Data + system) after disabling lagfix and rebooting android setup screen came up and my data was lost followed by lots of force closes - I went ahead and applied "galaxys-efsbackup.zip" and flashed "CM7 kernel" as instructed. After rebooting the phone was on CWM Recovery 3 and I tried "“mounts and storage” which did not worked.
Now, I have flashed back the SpeedMod kernal and back to CWM recovery 2.51 but restoring backups is not succeeding, pls. suggest how to get my phone back to a working state ?
Click to expand...
Click to collapse
This is now resolved I flashed the stock firmware via ODIN.
Pls. anybody for rescue ?
just download your stock 2.2 rom and flash the stock firmware with odin... should fix your problem
I was on Froyo 2.2, can I update to 2.2.1 latest firmware ?
Also what ODIN version and options should I flash with.
This is now resolved I flashed the stock firmware via ODIN.

[Q] Bootloop problem

I am just about to throw my phone at the wall.
So I was on stock 2.3.3 and decided I wanted to update to ICS
http://forum.xda-developers.com/showthread.php?t=1488096
I didn't have clockwork mod and wasn't rooted so I eventually got this working
http://forum.xda-developers.com/showthread.php?t=788108
Then I tried to install the ICS rom but it wouldn't work. I then tried to flash http://forum.xda-developers.com/showthread.php?t=1353657 which for some reason didnt have any cell phone coverage.
I tried going back to the just rooted version of 2.3.3 but haven't been able to get the phone to go past the samsung logo / Clockwork Recovery.
Edit: Whenever I try flash the 2.3.3 rooted rom it updates me to Clockwork Mod Recovery v3.0.0.5 with HEAPS of errors.
Any ideas?
You should go back to a stock rom via Odin...you will need a rom that has 3 files (csc , modem, phone) and the Odin 512 .pit file and check the repartition box.
Hawkester said:
I am just about to throw my phone at the wall.
So I was on stock 2.3.3 and decided I wanted to update to ICS
http://forum.xda-developers.com/showthread.php?t=1488096
I didn't have clockwork mod and wasn't rooted so I eventually got this working
http://forum.xda-developers.com/showthread.php?t=788108
Then I tried to install the ICS rom but it wouldn't work. I then tried to flash http://forum.xda-developers.com/showthread.php?t=1353657 which for some reason didnt have any cell phone coverage.
I tried going back to the just rooted version of 2.3.3 but haven't been able to get the phone to go past the samsung logo / Clockwork Recovery.
Edit: Whenever I try flash the 2.3.3 rooted rom it updates me to Clockwork Mod Recovery v3.0.0.5 with HEAPS of errors.
Any ideas?
Click to expand...
Click to collapse
Hi bro
1. Did you download the right cf root? and how did you flash it?
2. what did it say when you installed ics? did you wipe data?
3. how did you flash back to stock?
imgibby123 said:
You should go back to a stock rom via Odin...you will need a rom that has 3 files (csc , modem, phone) and the Odin 512 .pit file and check the repartition box.
Click to expand...
Click to collapse
I've since downloaded the stock file from here http://forum.xda-developers.com/showthread.php?t=846913 and im up and running again. I don't think ill be flashing anytime soon :L
NamNamNom said:
Hi bro
1. Did you download the right cf root? and how did you flash it?
2. what did it say when you installed ics? did you wipe data?
3. how did you flash back to stock?
Click to expand...
Click to collapse
I flashed the cf root the same as the software my phone had under settings. I flashed it using odin.
There was an error message, I can't recall it exactly, it couldn't execute or something. Yup I wiped data.
Flash back to stock using odin
Thanks for the help guys
Did you solve it?
NamNamNom said:
Did you solve it?
Click to expand...
Click to collapse
Half solved, im back on stock gingerbread.
Hawkester said:
Half solved, im back on stock gingerbread.
Click to expand...
Click to collapse
I recomend flashing Codename android 1.5.5, steps:
Download the latest CNA for Galaxy S, and Gapps
Get into CWM
Wipe dalvik/cache/data
flash it
flash Gapps
Done!

[Q] Stuck in boot cycle with CM9.1 what to do?

Hi, I used cm9.1 for a week but was disappointed with it's battery life, so i decided to try cm10 nightly. I did the CWM backup but after that i entered boot cycle and cannot boot to recovery now. Boot to download works fine, so what are my options now? Should i flash a stock rom and try flashing cm10 nigtly after that?
Edit: Managed to get recovery working but the recovery file itself doesn't work.
Try flashing Semaphore kernel for ICS via Odin, it may boot properly or it could get you to CWM, then you could flash a ROM... If not, download this http://d-h.st/4nP , it's pack of 3-file stock jw5 value pack, pit512, cf-root and Odin, flash it (if u know how), then just flash cm10 or cm9.1, your choice, there shouldn't be any problem
Thanks alot! Worked in the second attempt (the semaphore flashing)
I was upgrading from 9.0rc2 to 9.1 and encountered the same problem; could not get my phone into recovery mode, only download mode. Flashing Semaphore ICS 1.3.0 using Odin3 got my phone booting again without losing any data, settings or apps
Ajoslaf said:
Try flashing Semaphore kernel for ICS via Odin, it may boot properly or it could get you to CWM, then you could flash a ROM... If not, download thi , it's pack of 3-file stock jw5 value pack, pit512, cf-root and Odin, flash it (if u know how), then just flash cm10 or cm9.1, your choice, there shouldn't be any problem
Click to expand...
Click to collapse
thank you!!!

[Q] Help problem with Note N7000

Flashed Revolt rom without wiping data factory and got stuck with the revolt logo. Factory wipe was not happening and then i installed abyss kernel and was able to wipe factory, but was not able to flash revolt with it. Installation aborted.
tried to flash stock rom with odin but stuck at nand write...please help.
Try with hydracore kernel.
nokiamodeln91 said:
Try with hydracore kernel.
Click to expand...
Click to collapse
do i need to flash with some pit file coz of nand write?
Original pit file from Dr Ketan thread in Android original Dev section. But I would say change kernel using recovery mode and try flashing any custom rom again
My advice its before messing up your device.. Start fresh.. Flash GB stock with Odin.. And start from there
Tapatalking on my n7000
Done....downloaded a pit file and flashed it with stock rom...done....
now the problem is that though i flashed with odin with a pit file and i got to get the stock rom
but during flash odin showed Can't open the serial(COM) port two times and passed the flashing
now the mobile is too slow and hanging a lot....any solutions for this?
you should install a kernel with CWM and scan the emmc with HG42's partition scanners.

Categories

Resources