Hi,
I've got here a bricked galaxy s from a friend of my. he tried to root the galaxy s without knowing how.
But the problem is.. I don't know which firmware he had. So i don't know which .tar file i need for odin3 to restore.
Can i track somehow the firmware? its an europe version with 2.2 he said. Or is there an other way to restore this phone?
When i startup the phone it hangs at the galaxy s logo. I can enter download mode
Use Sammobile.com
You'll need to make a login first and then just follow the click to the files..
There are also stock packages in the general section such as cf-root, to gain root access. And there are other stock firmware threads there.
Try only flashing the code.tar file, I think that's where the kernal is but best to confirm that somewhere. Otherwise just flash the whole stock package.
i bricked my galaxy and i recomand a stock package and from that you can root and you can change to a custom rom if he wants that...
Talon26 said:
Use Sammobile.com
You'll need to make a login first and then just follow the click to the files..
There are also stock packages in the general section such as cf-root, to gain root access. And there are other stock firmware threads there.
Try only flashing the code.tar file, I think that's where the kernal is but best to confirm that somewhere. Otherwise just flash the whole stock package.
Click to expand...
Click to collapse
can you be more specific how to get the right firmware? Do i need to go to SAMFIT? or SAMSUNG LETTER CODE? i have no idea how to find it
Ok, sorry i thought Sammobile.com had complete instructions on how to find the firmware for you like it used to, but I haven't used it in a while..
I don't remember what all those codes mean and tbh it doesn't matter too much. The main thing is to find your CSC code. This will be the factor that would usually cause problems (actually annoyances) if incorrect, e.g. SMS messages not being received with the correct time and date.
Here, Ramad a very respected member of the community has made a collection of firmware generally with multi-CSC's. You can use these downloads or really any of the other downloads from sammobile (link to the Europe section). It doesn't matter much if he doesn't get the correct firmware because they are all available in Europe.
Find your CSC from Samfit samsung letter code. They are the 3-letter codes nearing the bottom. Press " Ctrl + F " and then type in your country. This will highlight your country on the page. Look to see if your carrier has a specific code, if it does then remember is and look at Ramad's list.
Go down to the 2.2 or 2.2.1 section and again " Ctrl + F " and type in the CSC. Look for the firmware that has it listed. Download that firmware and flash using the instructions at the top of Ramad's thread or using the pdf that you can download from sammobile. Generally the latest build date is best to download. But if you don't it doesn't matter because you will be using stock you can plug it into Kies and it will update it for you.
To check your CSC the long way (I cannot remember the short way ) type in *#272*(your imei)#
This will display your current imei and allow you to change it. Changing it to the one you want will factory reset your phone so be ready.
If i have left anything out or you have any more questions then let me know...
Hope all goes well
http://www.google.co.uk/url?sa=t&rc...2ZTkBw&usg=AFQjCNHCNRbuqVFXltW99vQc1_pfPlNr4Q
check this out video guide
Oke. I really bricked the phone now i guess.
If i turn on power.. it doesnt do a thing. can't enter download mode either
i downloaded the right .tar file im almost sure. But when it was flashing.. The phone was constantly rebooting. so the usb connectiong diddnt stay on.
Not to worry. You probably haven't bricked it. The worst you will probably have to do is make a purchase of a USB jig which forces download mode...
Before that however there are multi tricks to try get it into DM. (Obviously make sure your battery is sufficiently charged.)
1. Hold down the combo and then put the battery in, whilst holding the combo. (You will probably need help)
2. Start Odin (make sure all kies apps are closed on the comp first) plug in phone. Hold down combo.
3. Same as number 2 without battery. If it doesn't work. Set up as 2 hold combo then battery in.
4. Same as 2 with charger instead of computer.
I think those are all the combinations but you can search for it. There used to be a thread on general listing all the ways you could be bricked and ways of getting out.
Anddddd if all that fails, then you can make or buy a USB jig. Search general if you want to buy it but also you can find links to buyers members have used.
And in the worst case none of that works.. you can set the unbrickkable mod which means you will loose warranty for ever and never get it back as it is a hardware modification. I'll give the link to that if and when you need it.
Good luck
Sent from my GT-I9000 using XDA
pfjew. it worked. can enter download mode!
But when i want to flash my proper firmware it asks for a pit file this time. But i don;t have a pit file at my firmware that i downloaded from sammobile. only a .tar file and a .dll
Which .pit should i use? I really want the right one this time. Deffenitily dont want to brick the damn thing i grabbed this firmware from sammobile
I9000XWJW1 ## 2.3.6 2012 January I9000XENJV5 Netherlands
I did a quick search because Sammobile is now super crap. Remember reading this..
[GUIDE] [INFO] The reality of PIT files
Having a quick scan of what it says, I believe it does not matter...But best to read to be sure.
Let us know if it works
it worked. flashed the firmware. rom doesnt work.. Boot loop.
Can enter Android system recovery now. But because that doent support my external sd, and i can't boot properly i can't flash a new rom?
I would like to flash CWM with external_sd support. searching for that one now
(i know how at my optimus 2x.. but everything is lots easier at optimus 2x compared to sgs)
Have you tried flashing it again?
Also have you tried flashing an older rom with a multi csc that includes your csc?
And finally [ODIN] DarkyROM 10.2 Resurrection GT-I9000, usually helps people stuck in your situation. Id try the first two though because it keeps stock.
last one worked. thanks A LOT!
Hi,
my SGS seems to be bricked. I have tried everything described in the posts before, but nothing worked.
Here is what I did:
I downloaded several roms (those mentioned in the previous posts and from other forums) and installed them via Odin3 (1.85). The Odin log says everything went fine:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_XXJW4.tar.md5 is valid.
<OSM> CSC_OXAJW4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
The SGS reboots and stucks at the very first Samsung logo (the one without animation). When I hit the softkeys, the light goes on, but doesn't turn off again.
After each installation I didn't touch the phone for 20 minutes hoping that something happens - but nothing
Only 2 options are left:
- returning to the download mode
- removing the battery
Another strange issue: When I try to load the SGS, the displays turns on and shows the battery symbol, but it is not animated.
Has anyone an idea what else I can do?
Thank you for your help in advance!
@keinfilter:
from samfirmware.com the flash program for i9000 is 1.82 or 1.3 or 1.0
have you used the 512 pit file?
Well you say you have done all of the above...
1. You cant even boot with [ODIN] DarkyROM 10.2 Resurrection GT-I9000??
2. Wipe by going into recovery and doing all these wipes...
wipe date/factory reset + wipe cache + mount and storage>>>format system+cache+datadata+data (I dont wipe boot and you need sdcard)
After doing all the above wipes try Darky or stock with repartition checked...
3. I'm assuming that you used single tar files for flashing via odin, have you tried Odin flashes with 3 files?? If not either find a rom with 3 files or split one of the roms using the following guide by Ramad
Let us know if any of that works...
Good luck
Thanks for the very fast answers!
from samfirmware.com the flash program for i9000 is 1.82 or 1.3 or 1.0
have you used the 512 pit file?
Click to expand...
Click to collapse
I tested all three version (1.82, 1.3, 1.0), each with 3 files roms and the 512 pit file. Nothing changed, still the samsung logo.
1. You cant even boot with [ODIN] DarkyROM 10.2 Resurrection GT-I9000??
Click to expand...
Click to collapse
After trying the DarkyROM with his ODIN again, the DarkyROM logo (Galaxy S GT-I9000 powered by DarkCore & Darky's rom) is displayed instead of the samsung logo. But the boot process doesn't continue
DarkyROMs zip archive contains only the PDA.tar, what about the CHC and PHONE? Do I have to use these from other roms? I haven't tested it yet, because I don't want to make it worse.
Wipe by going into recovery and doing all these wipes...
Click to expand...
Click to collapse
I can't access the recovery mode. Tried it via holding Vol up + Home button + Power button until the Samsung logo was shown the 2nd time and then releasing all buttons, but nothing else than the samsung logo.
3. I'm assuming that you used single tar files for flashing via odin, have you tried Odin flashes with 3 files?? If not either find a rom with 3 files or split one of the roms using the following guide by Ramad
Click to expand...
Click to collapse
All the roms I tried consisted of 3 files but the DarkyROM.
Edit: Btw: I have no micro-sd or sim card inserted because I read in any forum it is better to remove them. I don't know if this makes any difference.
Has anyone further ideas? Any help would be appreciated!
Try to reflash in JVU STOCK with PiT512, MODEM, CSC, etc... with battery fully charged.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Envoyé avec Tapatalk 2.0.1 depuis mon Samsung Galaxy S GT-I9000
ROM : SLIM ICS 3.3
Kernel : Origine ROM
Modem : JW4
Related
Hello everyone,
I want my phone back to the way it was on android 2.1 so I can update to 2.2.
I got 2.2 on my phone before it was officially released, and had to do it with other CSC etc.
So I want my phone back to the way it was when I bought it, how will I be doing this?
I remember I had JM2 when I got it.
Thanks in advance.
EDIT:
Found this thread. http://forum.xda-developers.com/showthread.php?t=846913
Those are the ones you get when buying the phone right? So, can I just pick the JM2 and flash it?
Please help.
yes the ones in that link are official stock ROMs just flash which ever you desire and your phone is 100% original again.
Alright then, thanks.
I'm trying to find a tutorial on how to flash it, since it's been awhile. But I can only find tutorials for custom roms.
the tutorial is in the link, its relatively easy. have you downloaded the stock rom you want ?? does it come in 1 file or 3
It's still downloading it, but it's 1 file in .exe format.
The CSC's in that thread, does not include a JM2 one. Am I missing something? And what PIT file do I have to use?
im confused ??? its in .exe format ? wait till it download and then open it and make sure... if it needs a pit it should all be in there, a lot of stock roms come in just 1 .tar file.
I think it's a 7zip.
Alright, I'll just reply in this thread when there's something I need. Thanks for the help so far.
The PIT file isn't included, do I really need to use it or is it optional?
I think I have to use the 512.
just make sure re-partition is checked before you flash.
Alright.
But I think I have a little problem.
When I connect my phone, "0:[COM3]" shows up yellow in Odin. Shouldn't it be green?
Screenshot: http://i52.tinypic.com/34j4ufk.png
(I hope it's clear)
And it's just stuck there.
its supposed to be yellow.
Ok, but does it take long for it to go on?
I've tried it without the PIT file but then this happens.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
have you extracted the files ?? or did it come in 1 file ?
Procedure:
1.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
2.Select the PDA/Modem/CSC/.PIT files in Odin. (For kernel flashes, only PDA is required. For FW flashes, .PIT and at least a PDA is required. Some PDAs have Modem and CSC integrated. Make sure you have the correct .PIT file. Usually 512.pit)
3.Check the "Re-Partition" checkbox.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.When the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
That's what I forgot, the download mode.
But the Re-partition has to be un-checked? Should it be checked or not?
check it, if you have all 3 files. and pit. then everything will be normal
Ok, it's going good so far.
You have been a great help, I really appreciate it
It did say something about having no access to multi-something. But other went fine.
good, just be sure to let it boot properly. sometimes it can take 15mins to boot up so dont panic. as long as ODIN says PASS, all is well.
I got another question.
Since it's android 2.1 and 2.2 being released. Kies should tell you that there is an update?
But Kies says: This version of the device cannot be updated.
By current firmware version it says: PDA:JM2 / PHONE:JM1 / CSC:JM1
Something wrong?
Hi,
I managed to brick my Samsung Galaxy S I9000M.
Was locked on Virgin network (Canada) and I was trying to root the phone and then unlock it.
But something didn;t work properly (or I made a mistake) and now the phone keeps rebooting. I can go into Download mode but nothing more.
This is what I did:
1) I installed Odin 1.85
2) I started ODIN as admin, I pressed on PDA and then I selected a zip folder called
"CF-Root-XX_OXA_JVO-v3.2-CWM3RFS"
3) This is what ODIN was showing:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
5) So after waiting 5-6 minutes (in this time the phone was rebooting up to the Samsung logo) I turned off the phone and I have tried to start the device. But is not starting anymore, it keeps rebooing.
Now I don't know what to do to fix it.I know that I made a big mistake, I was not supposed to do something without knowing what I'm doing...But now it's too late, I have to fix it.
Note: The phone was running Android 2.3 (Gingerbread)
if its in boot loop then look like it's only softwoer brick.
so if you can get in to download mode by 3 bouten combination greate you can try to reflash (I will try all so to redownloading the files)
if not than you must find a JIG or some one with a JIG to get in to download mode and reflash.
The version of CF-ROOT you selected is not compatible with the version of GB (UGKG3?) that was on your phone.
If your phone had UGKG3 installed, there are very few rooted kernels available for it.
Black Rose said:
The version of CF-ROOT you selected is not compatible with the version of GB (UGKG3?) that was on your phone.
If your phone had UGKG3 installed, there are very few rooted kernels available for it.
Click to expand...
Click to collapse
Is the latest speed mod kernel compatible?
Sent from my GT-I9000 using xda premium
Yes, I can go into download mode.
How can I reflash the phone ? Which kernel should I use ?
Sorry but I'm new in this.
If you give me some links that will be great.
I don't want to aggravate the situation .
If the OP has/had UGKG3 installed, I have found that to be the oddest ROM I have used to date on my phone.
It does a lot of things differently.
I made another post on here where I attached a basic rooted kernel for the UGKG3 ROM. Let me go find it and link to it.
Again, this is assuming it was UGKG3. Ma Bell has only released one GB ROM for the GT-i9000m, so I think it's a safe bet that's what the OP was running on his Virgin branded phone.
EDIT: Here it is: http://forum.xda-developers.com/showpost.php?p=21655532&postcount=492
This will give you a basic rooted kernel, no CWM or anything else, just root.
You'll also need to download Superuser from the Market.
Thank you.
Now how should I install that kernel?
I suppose that after I reflash the phone it will start normally and then I can go to the Android market and install Superuser from there?
Is there a link with instructions (Step by Step guide)?
Sorry,but I dont have too much experience with this.
Thanks a lot!
I found this in the General thread, it has links and step-by-step instructions:
http://forum.xda-developers.com/showthread.php?t=1379650
Hope it helps
IntelQC said:
Thank you.
Now how should I install that kernel?
I suppose that after I reflash the phone it will start normally and then I can go to the Android market and install Superuser from there?
Is there a link with instructions (Step by Step guide)?
Sorry,but I dont have too much experience with this.
Thanks a lot!
Click to expand...
Click to collapse
Open Odin, select the zImage.tar file as PDA. DO NOT CHANGE ANY OTHER SETTINGS.
Connect your phone to your computer and wait for the ID:COM box to turn yellow.
Press Start.
Your phone will reboot and it should start normally.
Black Rose said:
Open Odin, select the zImage.tar file as PDA. DO NOT CHANGE ANY OTHER SETTINGS.
Connect your phone to your computer and wait for the ID:COM box to turn yellow.
Press Start.
Your phone will reboot and it should start normally.
Click to expand...
Click to collapse
Thank you very much !!!
My phone is fine now. It's rooted and I managed to unlock it using Galaxy_S Unlock + SuperBox from the market.
Thanks a lot .
This is what my phone shows now:
Firmware: 2.3.3
Baseband version: I9000UGKG3
Kernel version: [email protected]#2
Build number: GINGERBREAD.GKG3
Great, glad you got your phone working again.
Hi guys,
Current situation
I haven't been able to use my phone for a good day now and I been busy reading guides, trying out stuff for a bunch of hours now. I thought it was time to ask you guys. Currently this is the only thing I'm able to do:
When I boot normally its stuck on the black screen with Samsung Galaxy Note on it.
When I boot with volume down, a screen popups up if I'm sure than press volume up. After that I'm in ODIN mode (says so with red letters in the left top). Below that it says: PRODUCT NAME: GT-N7000 , CUSTOM BINARY DOWNLOAD: NO , CURRENT BINARY: SAMSUNG OFFICIAL.
In the middle of the screen below the Android guy it says: Downloading... Do not turn of target !! (I'm not really sure if its suposed to say downloading there, while its not downloading anything?)
What I did so far
I came from a gingerbread Rocket ROM and decided to try out the ICS Stunner rom. I downloaded the ROM and read the install discription. I pretty much went into CWM right away to install the zip (rom) from SD card. It did work and ofcourse everything was still there cause I didnt wipe anything. But I noticed that a bunch of things didn't work and a lot of programs where crashing. I assumed I must have missed a step so I decided to go with the 'Squeaky Clean' install, which was posted on the team-passion website.
This was the last time I was able to get into CWM and connect my phone true USB with my laptop. Because I did the following steps:
Reboot in to ClockworkMod Recovery.
Format the following:
- Wipe Data/Factory Reset
- Wipe Cache Partition
**Enter 'Mounts and Storage'**
- Format everything it will allow you to
**Go Back, enter 'Advanced'**
-Wipe Dalvik Cache
-Wipe Battery Stats
**Go Back to main menu, reboot system**
The next step on that list is: Remove your battery and boot up into 'Download Mode'. But the only mode I am getting into is the ODIN MODE where it already says 'Downloading...'. When I try to flash using ODIN, it isn't able to setup the connection. It does identify that the phone is connected because the ID:COM is yellow on 0:[COM3]. It didn't before, but after reading somewere that it might help to install Kies for the drivers it did.
Also tried "InitialCFRootFlasher" and "DooMLoRD_v4_ROOT-zergRush-busybox-su" but both arent able to establish the connection. Just like ODIN.
What I'd like to do
I'd prefer going with the ICS Stunner ROM, seeing thats how this all started. But currently I'd settle for anything working, because being phoneless for a day is pretty anoying hehe.
What do you guys suggest?
I really don't know how u understood the process. But just don't screw this. Go download any of the pre rooted odex rom -link in my signature - and flash it via odin.
Or any rootable rom from dr ketan's thread - link in my signature - and follow the steps mentioned there to the Dot slowly and calmly. Just get to GB and rooted. Then report here. Will tell u how to go to ics stunner after that.
BOOMED from my BOMBASTIC NOTE
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
h4y0 said:
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
Click to expand...
Click to collapse
Yup u need to be in that mode. The odin on your PC should show the Com port as yellow. If it doesnt then there is some drivers problem.
It is connected yeah, the com port is shown as yellow. After loading any rom in PDA, Phone or Bootloader and only checking auto reboot and f. reset time this is what happens:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And thats where its hanging, nothing on the phone screen is changing.
I don't remember the screen saying 'Downloading..' last time I flashed something. It's already saying that when I enter the screen, when its not downloading anything.
Apparently I'm not able to make edits yet here so heres another post after figuring out how to load these files:
It is connected yeah, the com port is shown as yellow. After loading the three files in ODIN under PDA, PHONE and CSC just like on the screenshot in your signature. And only checking 'Auto reboot' and 'F. Reset Time' the following happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
abhisahara said:
Just get to GB and rooted. Then report here.
Click to expand...
Click to collapse
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
h4y0 said:
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
Click to expand...
Click to collapse
Sorry was away so couldnt reply. The setup shown i xda should work perfectly. Anyways its good to know that you got all things settled. You can install the ICS Stunner (no touchwiz and no samsung apps) if you so want. Remember to backup your data as you will have to wipe data for going to ICS. From rooted GB install mobile odin then download the lp1 repack from my signature and after all that is done reboot to recovery clear caches and data and flash stunner (download the latest build by clicking Stunner in my signature) clear caches and data and reboot.
* Triangle away is required only when you flash lp1 through PC Odin.*
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
h4y0 said:
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
Click to expand...
Click to collapse
You are welcome. Glad it all worked for you. Hitting some thanks button will be good too LOL
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium
immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4
khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.
Just two options above, warranty or repartition.
Sent from my phone
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
andrew59it said:
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
Click to expand...
Click to collapse
so, what is your question actually??
Mate, I think the question is simple.
From what I understand in your comment, it seems you tried to install the Stock Rom 4.1.2 Italy, when you were the 4.0.4 / 4.0.3 Stock Rom Italy. On installation through ODIN pc you had a problem where it remains in the Samsung logo, will not let you enter the Recovery mode, only the Download mode. Is that so?
I should arrived that case do not leave any triangle would remove the battery, and after 10-15 seconds reintroduce it, and just then press buttons to enter the Recovery mode. If it fails, repeat the removal of the battery, but now when placed connect the DC charger to the phone I tried to turn normally to 20-25 seconds (just outside and away the logo of battery charging), and try to turn it on Recovery mode again, but we will keep down so long that should disappear all as to turn it off, and you press the keys for the Recovery mode, this time releasing anything else lighting appear on the screen, just a moment before letters GT-N7000, now if it really is accessible Recovery should apparate.
If you enter Recovery Mode Stock Samsung, you will have look out if a line appears below indicating the application, or wondering whether to apply the new CSC, we accept without thinking, since it must reaffirm the phone to initiate a Stock Rom.
Now if I come to this moment really was not accessible Recovery mode should get a screenshot of ODIN pc which finishes entering files to mobile, if it were really a fault, and do not leave do the installation, if you checked any box incorrectly, of which are not activated.
Other options include USB cable failure, USB port, lack of USB debugging enabled before starting the installation, do not put at least 10 minutes in the backlight time (this can try to fix running a finger across the screen every 23 seconds if it was 30 seconds off), but that the capture can determine ourselves if the error is only for ODN pc, which can be a failed in the installation and have not really finished the installation, in this case it would be almost insurance problem USB cable used, and in extremis or USB port.
fusionero said:
Mate, I think the question is simple.
From what I understand in your comment, it seems you tried to install the Stock Rom 4.1.2 Italy, when you were the 4.0.4 / 4.0.3 Stock Rom Italy. On installation through ODIN pc you had a problem where it remains in the Samsung logo, will not let you enter the Recovery mode, only the Download mode. Is that so?
I should arrived that case do not leave any triangle would remove the battery, and after 10-15 seconds reintroduce it, and just then press buttons to enter the Recovery mode. If it fails, repeat the removal of the battery, but now when placed connect the DC charger to the phone I tried to turn normally to 20-25 seconds (just outside and away the logo of battery charging), and try to turn it on Recovery mode again, but we will keep down so long that should disappear all as to turn it off, and you press the keys for the Recovery mode, this time releasing anything else lighting appear on the screen, just a moment before letters GT-N7000, now if it really is accessible Recovery should apparate.
If you enter Recovery Mode Stock Samsung, you will have look out if a line appears below indicating the application, or wondering whether to apply the new CSC, we accept without thinking, since it must reaffirm the phone to initiate a Stock Rom.
Now if I come to this moment really was not accessible Recovery mode should get a screenshot of ODIN pc which finishes entering files to mobile, if it were really a fault, and do not leave do the installation, if you checked any box incorrectly, of which are not activated.
Other options include USB cable failure, USB port, lack of USB debugging enabled before starting the installation, do not put at least 10 minutes in the backlight time (this can try to fix running a finger across the screen every 23 seconds if it was 30 seconds off), but that the capture can determine ourselves if the error is only for ODN pc, which can be a failed in the installation and have not really finished the installation, in this case it would be almost insurance problem USB cable used, and in extremis or USB port.
Click to expand...
Click to collapse
Thanks to reply.....
I was not really clear probably.
I tried to install 4.1.2 over 4.0.4 dedicate rom (3 H3G italian operator)
Odin always failed hanging or giving some fault
So I installed the ICS kernel (or rom) everything was fine. So I suppose the cable is ok , odin is ok etc....
But from the moment I downloaded the ICS, at reboot the phone hang on samsung logo with yellow triangle. ANd if I try to switch off the phone it restart and hang on logo.
Download mode is still working but recovery mode not.....
I'm looking for some kernel, rom, cwm to download, to recover the phone.....
The best thing to do is reinstall the ROM 4.1.2 (the 4.0.x are more dangerous if we wipes, JellyBean when they are not), but check that no error appears, if it appears only after installing the Rom rather fails during it, you can download the kernel Philz for you version, right now if you tell me the link to SamMobile I can tell you what, so you can tell which is correct, although it is not hard to tell if you look at the post of Philz above kernel with all links to them. After installation and download the kernel, you turn the phone into Recovery mode, you select mount usb (I think it came out well, but stresses) and connect your phone to your pc, you can pass the kernel to the internal SD and another copy to the SD external (remember to leave both copies at the root of both SD's). You MUST complete the transfer and disassemble with the option displayed on screen, and disconnect the USB cable. You continue by going to install zip, and should be able to select the Kenel Philz to install, after installing (if you get an error: Status 7 quiet, it was not the correct version of the kernel, and not actually installed), you will have to restart the mobile again, but when you start on with the letters GT-N7000, you will have to restart it by pressing Vol + - Power - Home, all at once, and keep it until the letters again, and keep it until it goes - restart, then you press the 3 keys, and when the letters appear, you must drop the 3 keys, and should you appear the menu Recovery kernel Phliz, there as you will see below something that says CSC implemented or instead ask if you want to apply, accept if you ask, and you should be able to restart the phone and wait about 5 minutes maximum to emit sound and vibration as it is booting at all, and then you should be able to start getting bills from Samsung and Google.
Thank fusionero
the problem is I'm not able to install the 4.1.2 , odin hang or fail
The ROM version I need is
sammobile.com/firmwares/download/22314/N7000XXLT9_N7000ITVLT3_ITV
So I think nex step is to install kernel Philz but I don't know which version I need. On the phone was installed 4.0.4 build IMM76D.XXLRL
CIAO
You must enter this http://www.sammobile.com/firmwares/download/22314/N7000XXLT9_N7000ITVLT3_ITV.zip/ address, and you must connect to you account to download that version you mention, I just check and this downloading smoothly on my pc . The problem is that it would open without ending .zip or you caught hours of server failure, just that i found this morning when downloading another who asked me.
As to what you mention about the version you have installed, as you are looking at the correct thread ( http://forum.xda-developers.com/showthread.php?t=1901191 ), the kernel you need for what you indicate ( 4.0.4 build IMM76D.XXLRL CIAO ) is this:
Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:
http://www.mediafire.com/?3ale6m9q6b6a3
Updated kernels list:
PhilZ-cwm6-BULR1-SWC-v3.99
PhilZ-cwm6-DDLR6-ODD-v3.99
PhilZ-cwm6-DDLR9-INU-v3.99
PhilZ-cwm6-DDLRB-ODD-v3.99
PhilZ-cwm6-DXLP9-OLB-v3.99
PhilZ-cwm6-DXLR2-OLB-v3.99
PhilZ-cwm6-DXLR5-OLB-v3.99
PhilZ-cwm6-JPLPD-OJP-v3.99
PhilZ-cwm6-JPLR8-OJP-v3.99
PhilZ-cwm6-UBLPC-UUB-v3.99
PhilZ-cwm6-UBLR3-PSN-v3.99
PhilZ-cwm6-UBLR5-TCE-v3.99
PhilZ-cwm6-XXLPY-XEN-v3.99
PhilZ-cwm6-XXLQ3-OXX-v3.99
PhilZ-cwm6-XXLRG-DBT-v3.99
PhilZ-cwm6-XXLRI-AUT-v3.99
PhilZ-cwm6-XXLRK-XEU-v3.99
PhilZ-cwm6-XXLRL-HUI-v3.99 - Is this your kernel
PhilZ-cwm6-XXLRQ-DBT-v3.99
PhilZ-cwm6-XXLRT-DBT-v3.99
PhilZ-cwm6-XXLRU-VDI-v3.99
PhilZ-cwm6-XXLRW-SFR-v3.99
PhilZ-cwm6-ZSLPF-OZS-v3.99
PhilZ-cwm6-ZSLPM-OZS-v3.99
PhilZ-cwm6-ZSLPN-OZS-v3.99
Click to expand...
Click to collapse
andrew59it said:
Hello new in this forum.....
The threads I read overwhelmed me.... :cyclops:
I have a N7000 from a friend of mine. It had a dedicated 4.0.4 rom from "3" (italian operator) build IMM76D.XXLRL
I tried to install a new italian rom 4.1.2 via odin but every attempt failed
Unfortunately I ended up into a thread about ICS kernel (sorry if I make some mistakes with names but I'm really lost....)
so downloaded the ICS and with my surprise it was installed into the phone.
From that moment the N7000 hang at samsung logo with the yellow triangle....
And the worst thing It goes in download mode but not in recovery mode.....
I tried to read many post before write, trying to understand waht to do but now I'm totally confused..... md5,tar,img, zip...... kernel,root, cwm., rom ....
Someone may explain to me if there is something to do to save the phone?
Thanks i n advance
Andrea
Click to expand...
Click to collapse
Your phone is not booting since you flashed an ICS kernel over a JellyBean ROM
Android ICS version : 4.0.4
Android JB version : 4.1.2
so I hope you understand the difference.
You are lucky you didn't brick your device or have you already
But since you are able to go in download mode I think its not bricked yet.
It was probably a bad download which failed the installation so download ROM again and this time verify that your download is not corrupt by running it via md5 if provided.
also please provide the link of the ROM thread that you are trying to install so that I can understand better
and if you are not looking to flash a custom ROM or rooting your device in order to do so then in that case the steps are pretty straight forward
download Stock ROM
extract ROM
open Odin
select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC
put phone in download mode and connect
the bar should turn yellow once connected.
once connected click on flash
bar should turn green if successful
REVENGE SOLVES EVERYTHING
tysonraylee said:
Your phone is not booting since you flashed an ICS kernel over a JellyBean ROM
Android ICS version : 4.0.4
Android JB version : 4.1.2
so I hope you understand the difference.
You are lucky you didn't brick your device or have you already
But since you are able to go in download mode I think its not bricked yet.
It was probably a bad download which failed the installation so download ROM again and this time verify that your download is not corrupt by running it via md5 if provided.
also please provide the link of the ROM thread that you are trying to install so that I can understand better
and if you are not looking to flash a custom ROM or rooting your device in order to do so then in that case the steps are pretty straight forward
download Stock ROM
extract ROM
open Odin
select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC
put phone in download mode and connect
the bar should turn yellow once connected.
once connected click on flash
bar should turn green if successful
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Thanks everyone....
I think you hit the problem..... but my original ROM version was 4.0.4 .... (H3G)
Anyway probably something went wrong.... I don't need a custom ROM or to root the device.
I need to install N7000XXLT9_N7000ITVLT3_ITV if possible but the flash doesn't start via ODIN
May you explain step by step what have I to do? I really appreciate....
What do you mean "select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC" ?
md5 is not a single file? I read something about more files to place in odin.....
@ fusionero: I already downloaded the files.... also PHILZ XXLRL but the device doesn't start anyway.....
andrew59it said:
Thanks everyone....
I think you hit the problem..... but my original ROM version was 4.0.4 .... (H3G)
Anyway probably something went wrong.... I don't need a custom ROM or to root the device.
I need to install N7000XXLT9_N7000ITVLT3_ITV if possible but the flash doesn't start via ODIN
May you explain step by step what have I to do? I really appreciate....
What do you mean "select appropriate files i.e Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC" ?
md5 is not a single file? I read something about more files to place in odin.....
@ fusionero: I already downloaded the files.... also PHILZ XXLRL but the device doesn't start anyway.....
Click to expand...
Click to collapse
Did you download the XXLT9 ROM?? or the ROM that you want to flash ??
if so then it should be a zip file, if you extract that zip file you should have 3 files in it (sometimes only PDA file is present and the other two i.e Modem and CSC are not present, dont worry the PDA file alone is enough)
Open Odin, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7000XXDLJ5_N7000ODDDLI7_INU.tar.md5 Select the one that looks similar to the ROM you downloaded)
and if there are CSC and Modem files then select them by clicking Phone and CSC in Odin accordingly. It will be mentioned in the file name if its a Modem or CSC file
if MODEM_XXXX.tar.md5 then select that file by clicking the PHONE in Odin and if XXXX_CSC_XX.tar.md5 then select it by clicking CSC in Odin
remember that you lose all your data
Then just click flash and it should flash
md5 is a single file and is used to check the integrity of the file you downloaded. Its just used to make sure that the file you downloaded doesnt have any errors or is corrupt. you use the .md5 file and compare it with the md5 of the ROM.zip If it matches then its not corrupted or is a bad download. (.tar.md5 and .md5 are different files as in .tar.md5 is a firmware file and .md5 is a hash file used for integrity check)
Just right-click the rar/zip file and select properties and select the "file hashes" tab and if you downloaded a .md5 open that file by clicking "compare file" in the same tab
.md5 is always provided along with file you downloaded and its size is always in kbs , if its not provided then you cant do the hash check
If you dont have "file hashes" tab after right-clicking and selecting properties of the rar/zip file then you should download and install HashTab to get that option
follow this video for a better understanding https://www.youtube.com/watch?v=Ulz-1UYzHBA
the process is same but you should use your ROM files i.e Italian N7000 files to flash your phone and yes Odin version doesnt matter, you can use any version
Hello
I downloaded N7000XXLT9_N7000ITVLT3_ITV.ZIP
Extracted the file into a folder and had N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 (there is also SS_DL.dll)
Tried to flash the md5 file with odin (V.1.85) , but odin returns a fail.....
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
andrew59it said:
Hello
I downloaded N7000XXLT9_N7000ITVLT3_ITV.ZIP
Extracted the file into a folder and had N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 (there is also SS_DL.dll)
Tried to flash the md5 file with odin (V.1.85) , but odin returns a fail.....
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
did you follow the video??
did you select N7000XXLT9_N7000XXLT3_N7000ITVLT3_HOME.tar.md5 by clicking PDA??
REVENGE SOLVES EVERYTHING
Yes of course.....
andrew59it said:
Yes of course.....
Click to expand...
Click to collapse
still odin fails?? even after following the video??
are you using the original cable to flash ??
try plugging the cable into a different usb port and flash
Yes it fails
I will try with another cable and port. But if I flash Philz rom it works.....
andrew59it said:
Yes it fails
I will try with another cable and port. But if I flash Philz rom it works.....
Click to expand...
Click to collapse
after trying that try the solution from this post http://forum.xda-developers.com/showthread.php?p=41844601#post41844601
and also try and follow the thread as people have posted different solutions regarding your problem
Also this would be the extent of help i can provide
if that doesnt work i dont know what will
So please forgive me for not being able to help any further :angel:
maybe you should use odin3 v3.04 or v3.09.
usually i use odin3 v1.8X for multiple file roms but in your case, you have only One-file rom.
---------- Post added at 01:12 PM ---------- Previous post was at 01:09 PM ----------
besides, extract all the files in odin archive and place them in one folder dont just start the odin .exe file directly from the archive.
Hello changed the cable the port and ODIN (ver 3.04)
The same problem..... look at the picture attached....
I'm loosing hope.....:crying:
Thanks to all....
solved the problem!!! WOW! :good::victory:
The solution was to change pc, I went on my girlfriend laptop and everything went smooth as silk.....
Thank you all to supporting me !!
andrew59it said:
Thanks to all....
solved the problem!!! WOW! :good::victory:
The solution was to change pc, I went on my girlfriend laptop and everything went smooth as silk.....
Thank you all to supporting me !!
Click to expand...
Click to collapse
congrats
REVENGE SOLVES EVERYTHING