I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know
after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!
IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps
capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?
okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!
mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?
Hi everyone
I am new to Android. I upgraded my galaxy note GT N7000 to the official ICS German version. everything went smooth but then the battery consumption was terrible. I tried Franco kernel #3 and it didn't help so i restored the other kernel using CWM. everything is fine now but i heard about the risk of phone brick. I want to go back to GB but all the methods i reviewed involve wiping data which is the risky step that might hard brick the phone. Any suggestions? ?
Thank you and forgive my humble English
Sent from my GT-N7000 using XDA
afaik there is no way to downgrade (officially) without wiping everything :/
flash via cwm the abyss kernel, reboot in recovery through this kernel
Wipe & reflash from abyss a GB rom
I did a CMW backup before flashed to German ICS. After that find out that the ori ics is not really fast and stable, so I restore back to GB through CMW..
ckkwang said:
I did a CMW backup before flashed to German ICS. After that find out that the ori ics is not really fast and stable, so I restore back to GB through CMW..
Click to expand...
Click to collapse
unfortunately I didn't back up my GB
Spartagek said:
flash via cwm the abyss kernel, reboot in recovery through this kernel
Wipe & reflash from abyss a GB rom
Click to expand...
Click to collapse
probably I will try that. I was decided to keep the ICS till a solution for the brick comes up but this afternoon the phone screen started to go blank and display like old tv so it seems I have to go back to GB.
Another question please : Is there a risk that the phone will "auto-brick" by itself if I just keep the current ICS without making any changes or the brick happens only while installing or changing something??
I need to a Nandroid Restore on my phone. It's currently running CM9RC2 with Semaphore ICS 1.3 and CWM6. The backup was taken from a Gingerbread 2.3.6 stock ROM (although I can't remember which exactly) with Semaphore 2.7.4 and CWM5
So what do I need to do to successfully restore without messing anything up? Do I need to reflash back to stock ROM, or can I just run the restore as it is and it'll put everything back to how it was?
bigdave196 said:
Do I need to reflash back to stock ROM, or can I just run the restore as it is and it'll put everything back to how it was?
Click to expand...
Click to collapse
look in My Guides and Manuals about nandroid
You can't use different CWM to restore your nand I would suggest Odin back to stock re-root and make sure you add the same CWM recovery so you can update to 2.3.6 then after boot go back in recovery wipe and all the usual and then restore your back up
Sent from my SGH-T989 using xda app-developers app
Hurray, managed to sort everything out and my phone is back to exactly how it was before I installed CM9.
Thanks for the help guys
this is my post before in other thread, from this you can know my problem:
help me..
sorry for my english,
I am upgrading from gb to jb(ultimate rom)
but in jb there is no root. now i want to go back to gb.
I have nandroid backup in gb, before I root it using dr.Ketan's guide.
using this:
CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5
as I know to restore the nandroid, I need to use same cwm, because in ultimate rom using cwm6, but in gb I am using cwm5.
what I need to be help is I forgot the cwm5 version, please anybbody know the version?
the second things I confuse is, how do I root the ultimate jb rom?
thanks in advance..
*update:
i have read many post in xda and many user also face the same problem.
the conclusion I get it is the philz touch cwm6 that is making the error, the problem now is, there is new update philz touch but I cannot flash it, because when flashing they stuck before complete.
*update:
I am stuck in jb rom.
this is what I am going to do.
flash using dr ketan methode, using InitialCFRootFlasher, flash using usb to gb kernel(CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5). hope get the cwm5. then restore my gb nandroid backup(if still possible to boot to cwm5).
hope it is safe.this is my last bet.
maybe tomorrow I will do it.
thanks for the help..
I am stuck in cwm6 because cannot "unmounting system".
now, what i want to do first is restore nandroid backup, only this the question:
can I restore GB nandroid backup cwm5 from JB cwm6?
*update:
if cannot restore GB nandroid backup cwm5 from JB cwm6.
how do I install cwm5 without odin?, also cannot flash directly from cwm6 because stuck in cwm6 because cannot "unmounting system"
I am now in cwm6 jb ultimate rom, my backup is GB nandroid cwm5.
Just flash a stock gb rom via odin.. Get the rom in sammobile.com, start fresh its always the best option
Tapatalking on my n7000
That is a bit too many problems, just go back to stock GB using PC Odin, root and then flash whichever ROM you want.
as advised, charge your battery fully, get into download mode and flash a GB rom......after flash is successful and your mobile is ready for set -up, get into GB stock recovery and wipe data and cache....reboot into rom. root it by zergrush method or ask here how to....
dont play around with CF root kernels ( for ics ) for nandroid restore etc etc..... till your phone is completely stabilised.
thanks everybody...
successfully flash to GB with yellow triangle
Hi,
I think I bricked my phone very well. I used Odin to put some GB Kernel in order to be able to upgrade to JB. Later I got into recovery mode and cleaned cache and many other things, but was unable to wipe data\factory reset, from there it all went down. I tried fixing it using this guide, but it didn't help. I still can get into download mode, though. And sometimes even into recovery, but it gives me tones of errors.
What can I do? How do I fix it now???
Thanks in advance!
Fix:
Try to flash a stock GB rom with Odin.
Kernel/ Upgrade to JB
After that flash a rooted kernel. Try CF-Root or Semaphore Kernel.
pila405 said:
Hi,
I think I bricked my phone very well. I used Odin to put some GB Kernel in order to be able to upgrade to JB. Later I got into recovery mode and cleaned cache and many other things, but was unable to wipe data\factory reset, from there it all went down. I tried fixing it using this guide, but it didn't help. I still can get into download mode, though. And sometimes even into recovery, but it gives me tones of errors.
What can I do? How do I fix it now???
Thanks in advance!
Click to expand...
Click to collapse
flash rom first, find ur own firmware, then flash rom using odin, if ur pet kernel first, there will be no rom to reset.
Sent from my GT-I9000 using xda premium
I indeed flashed stock GB, and managed to update to JB from there
Thank you very much guys!
pila405 said:
I indeed flashed stock GB, and managed to update to JB from there
Thank you very much guys!
Click to expand...
Click to collapse
Press the thanks button if someone helped you
Hi,
got one problem. hope im typing in right section.
Flashed my I9000 to 2.3.6 JVU plus CF-Root. Minutes later ive tried to flash Gamerzrom via CWM.
(done a full wipe / factory reset, wiped caches etc.).
After that Phone reboots and is stuck in a bootloop containing the Semaphore screen and i cannot
enter CWM again. I have to reinstall stock rom first and then root it again.
Dunno what im doing wrong at that point; am i using wrong kernel?
thanks in advance
that gamerzrom...2.3 or 4.2?
if u wanna flash to 4.x, need to flash cm9 first.flash twice, from 2.3 to cm9 to cm10.dont do shortcut please...
cm9 need to flash twice, bootloop will occur on first flash,use 3 button combo to go back to recovery,its da matter of releasing da 3 button,release it rite after u see da white sgs,if still cant, flash back firmware n redo step.
after flashing cm9, do not reboot,flash cm10 or gamerzrom,first flash will error,flash it back again n then reboot, do wipe everything except sd when in 2.3, and please...read first before asking