Hi All.
I'm trying to get my friends phone to work. he got given it as a gift from a family member who upgraded, this was about 3 weeks ago and i havent been able to get it to work. the phone is unlocked, and now rooted with Dark Nights 4.0.4... it did have gingerbread 2.3.5 on... but regardless of the rom this handset has had this problem ever since.
The problem:
When we first put his sim card in, he popped up with signal and a carrier name, then changed to emergency calls only. But the signal bar was still full! So thinking it was software related i gave the phone a factory reset, no fix. So i then rooted the handset and put a custom rom on, the same rom that i use on my i9000. Darkys Rom 4.0.4. Still no fix, this is very wierd, tried lots of sims in this phone now and does excactly the same with each one, and we know these sim cards work because there our own.
We have tried with 3, T-Mobile, Orange, o2 and Vodafone. Excactly the same happens all the time, carrier name pops up for about 2 seconds then goes to emergency calls only. but signal bar still full.
Here is all the details on the about section of the phone....
Model Number: GT-I9000
Android Version: 4.0.4
Baseband Version: I9000XXJVU
Kernel Version: 3.1.10-i9000 Devil_1.1.6b_BFS_BLN_CMC
Build Number: Dark Night 4
Status Section of Phone....
Network: Orange (Currently as Sim)
Signal Strength: -83 dBm 16 asu
Mobile Network Type: UMTS:3
Service Status: Out of service
Roaming: Not roaming
Mobile Network State: Connected
My Phone Number: (Displayed Correctly)
Imei: (Displayed)
IMEI SV: 01
This is all details under the *#-#4636#*#* testing page....
Signal Strengh: -85 Dbm 15 asu
Location: LAC = bbc CID = bbc8d3b
Neighbouring CID: unknown
Roaming: Not roaming
GSM Service: Emergency Calls Only
GPRS Service: Disconnected
Network Type: UMTS:3
Message Waiting: False
Call Redirect: False
Call Status: Idle
Radio Resets: 0
Data Attempt: 0
Data Successes: 0
GSM Disconnects: ========DATA=======
PPP Sent: -1 pkts, -1 bytes
ppp recieved: -1 pkts, -1 bytes
Number of PPP reset since boot: 0
I know this might be information OVERLOAD but i thought if it helps someone help me, then so be it!
PLEASEEEEE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please can someone help me as this has now beaten me!!! And im ready to throw this phone away!!! lol...
Huge thankyou in Advanced!!!
Dobby
Is the apn setup correctly? You should be able to get correct config from the web
Sent using TCP/IP
gsw5700 said:
Is the apn setup correctly? You should be able to get correct config from the web
Sent using TCP/IP
Click to expand...
Click to collapse
yeah those are the first things ive looked at. lol... and for each sim card they have been set up correctly.
Have you still got your proper imei number?
Sent using TCP/IP
gsw5700 said:
Have you still got your proper imei number?
Sent using TCP/IP
Click to expand...
Click to collapse
Yeah thats displayed correctly.
Hmmm, have you tried factory reset? If so, might have to reflash back to stock rom, that should get radio working (unless imei is barred somehow)
If you have a backup of your efs folder, try restoring it (after backing up current efs folder)
clear cache, dalvik cache, reset permissions, reboot
Sent using TCP/IP
gsw5700 said:
Hmmm, have you tried factory reset? If so, might have to reflash back to stock rom, that should get radio working (unless imei is barred somehow)
If you have a backup of your efs folder, try restoring it (after backing up current efs folder)
clear cache, dalvik cache, reset permissions, reboot
Sent using TCP/IP
Click to expand...
Click to collapse
Yeah tbh mate, i think its fubard... done all that and still no joy!
did you do full wipe, the flash stock rom using odin with repartition? if so, not looking good unless someone else has any ideas
Sent using TCP/IP
I had a similar issue with my I9000T.
I was able to get sertvice in some areas and Emergency calls only in others.
I flashed back to stock and still had the issue, so i returned it to my carrier for service and it came back all good.
OK, i was going to flash to stock again just to make sure, and i cant find the rom, were can i download it for Odin? I cant remember were i got my one from?
dobknobby said:
OK, i was going to flash to stock again just to make sure, and i cant find the rom, were can i download it for Odin? I cant remember were i got my one from?
Click to expand...
Click to collapse
You can find stock here:
samfirmware.com
But you have to register for downloading.
Sent from my GT-I9000 using Tapatalk 2
rackjob said:
You can find stock here:
samfirmware.com
But you have to register for downloading.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
thankyou
Related
I am a Three user in Australia and enjoyed my milestone very much
but everytime when I connected with 3G network the phone reboot
It just runs well with 2G and edge network but can see inevitable reboot everytime when i connect with 3G
Would it be caused by the baseband or Firmware?
I m currently using 3GSMEPU91A_U_91.07.56I
and build number SHOLS_U2_02.36.0
I have tried to wipe everything and flash into another rom but the problem still exist...
I have even sent to the service centre and they could not found any problem
Can anyone here could help me?
kitmochi said:
I am a Three user in Australia and enjoyed my milestone very much
but everytime when I connected with 3G network the phone reboot
It just runs well with 2G and edge network but can see inevitable reboot everytime when i connect with 3G
Would it be caused by the baseband or Firmware?
I m currently using 3GSMEPU91A_U_91.07.56I
and build number SHOLS_U2_02.36.0
I have tried to wipe everything and flash into another rom but the problem still exist...
I have even sent to the service centre and they could not found any problem
Can anyone here could help me?
Click to expand...
Click to collapse
1.what rom did you flashed into?
2.did you try flashing other sbf file?
Hi guys,
So I had this problem before, but the Captivate magically fixed itself. This time... not so much. Or not yet anyway.
Upon boot I get a "No network" symbol. Sometimes it shows the bars on boot, but quickly reverts to the no network status. I just flashed the newest version of Cognition with the accompanying kernal. I have bounced around through various roms and kernals all night, but the problem seems to carry over (even after wiping the data/cache/return to blah blah).
Any ideas?
Try some other modem......
http://forum.xda-developers.com/showthread.php?t=876391
Crispy1805,
Try going to Access Point Names and tap menu then Reset to default. Once it populates at the top of ur screen, tap the dot, it will turn green and u should be good to go.
Menu/ Settings/ Wireless and network/ Mobile networks/ Access point names/ then menu/ "Reset to default" then tap the dot selector. Reboot should not be needed.
Sent from my SAMSUNG-SGH-I897 using xda premium
Apn are for data right, is this anyway related to connectivity to the network.
Yes, you need to be accessing at&t's access point to connect to it's network...
Hm, tried that, no avail. The problem is that it is not detecting any "bars" at all. I removed the sim, same problem. My Infuse is showing bars in the same location, so its not a network problem.
Did you make a backup of your efs folder you can restore?
Good point, let me check and try that if I can find it.
gah, I cant find it.
Try this http://forum.xda-developers.com/showthread.php?p=15158920 ... Use the 3 file version. It is kf1 stock, but the kf1 came with a seperate CSC .tar file and the kf1 is a full wipe... Worth a shot. But u need to already have the i897 bootloaders.
If this works, then u can move on to kh3 or whatever u r wanting to go to...
Sent from my SAMSUNG-SGH-I897 using xda premium
I flashed back to stock (enclair---odin 1 click and master clear), but it is still not showing any network /bars. I tried this --
http://forum.xda-developers.com/showthread.php?t=881162
but all of the values were already correct. When I check for an IMEI it says "not registered on the network" --- but it can't SEE the network as far as I can tell, so that makes sense. Perhaps the network card isn't coming on at boot?
Any more ideas?
This had happened to me recently, Some how 1 of my captivate lost the original imei and had the generic one 0000461090000, When u chek under the status it shows the details but no connectivity. I restored the imei and all ok.
Mine has its generic IMEI. It was sim locked for some reason, but I fixed that--- still no signal , just the blue circle with the bar through it. Under status:
Network -- Unknown
Signal Strength -- 0 dBm 0 asu
Mobile network type -- GRPS
Service State -- Out of Service
Roaming -- Not Roaming
Mobile network state -- Disconnected
Again, the Infuse right beside it is picking up signal (2 bars of "4G" i.e. 3.5G)
Update: Flashed to 2.3
Now the signal strength -- -111dBm 1asu
The rest is still the same :-\
Generic imei does not works in India we cannot register without a proper imei but it works in US members here have confirmed this. Check your lock status with *#7465625# what it says.
studacris said:
Did you make a backup of your efs folder you can restore?
Click to expand...
Click to collapse
Just out of curiosity...If I make a backup of my efs folder now while running the FASTY II (KH3 i897 ROM) then flash say, Rom EPIC (JVS I9000 ROM) and end up having no network (This actually happened) will I be able to successfully restore the efs folder without having any problems?
Yes you can restore it.
Do you think its an EFS folder problem? I am clueless at this point.
Code:
You have a generic imei and it is quite possible the problem is coz of that.
Sent From Infuse®
No, I do not have a generic IMEI.
For some reason, whenever I flash CM7 I lose all network connections. Anytime I flash this ROM I get the little blinking triangle in the statusbar. I can't go through the Google sign in because I have no network connection. Here is my method for how I installed:
Enabled Safe System
Formatted /system
Flashed CM7, flashed gapps
Wipe data/factory reset
Wipe Cache
Reboot
Everything goes smooth until my phone starts up and shows that stupid little icon. Then I'm pretty much stuck and can't do anything except restore my backup. Any suggestions anyone?
It doesnt go to activation for *228?
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Stock Kernel, Custom lite De-bloat)
verkerria said:
It doesnt go to activation for *228?
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Stock Kernel, Custom lite De-bloat)
Click to expand...
Click to collapse
It does but it didn't help any. Reactivated the phone, then did option 2 to update roaming capabilities and it still didn't help.
turn on data roaming. And you wiped after flashing? I haven't used safestrap, but try wiping then flashing. 228, option 1 and 2, enable data roaming
Sent from my DROID3 using XDA App
danielkuhlman said:
turn on data roaming. And you wiped after flashing? I haven't used safestrap, but try wiping then flashing. 228, option 1 and 2, enable data roaming
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Both data roaming options are selected. Still nothing after reboot. Can't do *228 do to no signal/data/service.
Wiping first, then installing now.
EDIT: Still nothing. I made a backup but still.....I really want CM7 instead.
Here is a dumb idea but do you have Wi-Fi you can access to set it up? Does hitting all four corners bypass setup?
Sent from my DROID3 using XDA App
MrObvious said:
Here is a dumb idea but do you have Wi-Fi you can access to set it up? Does hitting all four corners bypass setup?
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I was at work but now being at home I can connect it to Wifi to get through the setup but that's where things get even more weird lol. I get through setup and everything and the ROM boots up perfect except of course for not having any service. The blinking triangle is still there, but I can make and receive calls. Can't download anything market and can't bring up anything on the browser unless I stay on Wifi. I can't always be connected to Wifi though. I think I'm just going to SBF back to stock, then try to install this thing. If that doesn't work then I'm just going to give up lol. I've been going at this for 20 hours straight and can't figure it out, maybe it just wasn't meant to be lol.
Double check your SIM card? For some reason CM7 is very picky right now about the SIM being installed.
Hashcode said:
Double check your SIM card? For some reason CM7 is very picky right now about the SIM being installed.
Click to expand...
Click to collapse
No SIM card installed. I've tried *228 to activate and it said it worked. Then did *228 to update roaming capabilities which said it worked too. Still get the triangle and no data though. I just did a SBF back to stock 5.6.890 (XT862) and am going to try to install again. Will post again with an update.
Ok. I redownloaded CM7 to make sure it wasn't a bad download.
SBF back to stock 5.6.890
Re rooted and reinstalled safestrap 1.0
Rebooted and pressed menu button to get into recovery
Enabled safeboot
wipe data/factory reset
wipe cache
wipe dalvik
flashed CM7
flashed patch
flashed gapps
Reboot ---> Same results. WTF is going on with this phone????
I also tried all the steps above with the exception of flashing the patch files and I still got the same results.
Maybe this will help. This is what I see after I flash everything and reboot, in the About Phone>Status menu:
My Phone Number: Unknown
MIN: Unknown
PRL Version: Unknown
MEID: XXXXXXXXXXXX
Network: Unknown
Signal Strength: -95 dBm 0asu
Mobile Network type: CDMA - EvDo rev.A
Service State: In service
Roaming: Not Roaming
Mobile Network State: Disconnected
Going to do the *228 now and see if anything changes.
After *228, then *228 option 2:
My Phone Number: 740xxxxxxx <----correct number
MIN: 7403025845 <------correct number
PRL Version: 52629 <-----now shows PRL
MEID: XXXXXXXXXXXX
Network: Unknown <------ Still says Unknown
Signal Strength: -94 dBm 0asu
Mobile Network type: CDMA - EvDo rev.A
Service State: In service
Roaming: Not Roaming
Mobile Network State: Disconnected <---- Still disconnected
After doing *228, it did say that it could take up to 15 minutes so I guess it's just a waiting game now but I seriously doubt it will change.
spc_hicks09 said:
No SIM card installed. I've tried *228 to activate and it said it worked. Then did *228 to update roaming capabilities which said it worked too. Still get the triangle and no data though. I just did a SBF back to stock 5.6.890 (XT862) and am going to try to install again. Will post again with an update.
Ok. I redownloaded CM7 to make sure it wasn't a bad download.
SBF back to stock 5.6.890
Re rooted and reinstalled safestrap 1.0
Rebooted and pressed menu button to get into recovery
Enabled safeboot
wipe data/factory reset
wipe cache
wipe dalvik
flashed CM7
flashed patch
flashed gapps
Reboot ---> Same results. WTF is going on with this phone????
I also tried all the steps above with the exception of flashing the patch files and I still got the same results.
Maybe this will help. This is what I see after I flash everything and reboot, in the About Phone>Status menu:
My Phone Number: Unknown
MIN: Unknown
PRL Version: Unknown
MEID: XXXXXXXXXXXX
Network: Unknown
Signal Strength: -95 dBm 0asu
Mobile Network type: CDMA - EvDo rev.A
Service State: In service
Roaming: Not Roaming
Mobile Network State: Disconnected
Going to do the *228 now and see if anything changes.
After *228, then *228 option 2:
My Phone Number: 740xxxxxxx <----correct number
MIN: 7403025845 <------correct number
PRL Version: 52629 <-----now shows PRL
MEID: XXXXXXXXXXXX
Network: Unknown <------ Still says Unknown
Signal Strength: -94 dBm 0asu
Mobile Network type: CDMA - EvDo rev.A
Service State: In service
Roaming: Not Roaming
Mobile Network State: Disconnected <---- Still disconnected
After doing *228, it did say that it could take up to 15 minutes so I guess it's just a waiting game now but I seriously doubt it will change.
Click to expand...
Click to collapse
He meant you need the SIM card inserted for data to work. Try putting the SIM card in (you dont need to have it activated -- just inserted)
ChaoticWeaponry said:
He meant you need the SIM card inserted for data to work. Try putting the SIM card in (you dont need to have it activated -- just inserted)
Click to expand...
Click to collapse
Is that just a CM7 thing? Never had one on stock or on DarkDroid and data worked just fine.
spc_hicks09 said:
Is that just a CM7 thing? Never had one on stock or on DarkDroid and data worked just fine.
Click to expand...
Click to collapse
Yeah, CM7 is still in it's beta stages. Hashcode is still working out the bugs (although currently working on ICS)
ChaoticWeaponry said:
Yeah, CM7 is still in it's beta stages. Hashcode is still working out the bugs (although currently working on ICS)
Click to expand...
Click to collapse
Well that definitely explains it. I wish that was pointed out in the OP. I bought this phone from Verizon but was told I didn't need the SIM card since I wasn't going to use the global services.
Boot up go into dev tools and select bad behavior, crash system server it will reboot phone and you will have 3g.I know because I done this lol..it doesn't stick though so every time you reboot you will have to do this.. It's what I had to do until I got a Sim card....
spc_hicks09 said:
Well that definitely explains it. I wish that was pointed out in the OP. I bought this phone from Verizon but was told I didn't need the SIM card since I wasn't going to use the global services.
Click to expand...
Click to collapse
Did it work, or do you not have a SIM card?
ChaoticWeaponry said:
Did it work, or do you not have a SIM card?
Click to expand...
Click to collapse
I don't have a SIM card.
EDIT:
I edited my post title and added a [SOLVED] tag. For anyone that reads this and is having the same issue, you MUST have a SIM card installed for CM7 or you will never have a data connection.
You will have 3g if you crash the system server through dev tools...it may be annoying every boot up but if you want cm7 bad enough it's worth it. I done it until I got a Sim card.
Jphatcher84 said:
You will have 3g if you crash the system server through dev tools...it may be annoying every boot up but if you want cm7 bad enough it's worth it. I done it until I got a Sim card.
Click to expand...
Click to collapse
Yeah I'm not doing that every time I reboot my phone. I reboot a lot because I'm always doing stuff. It needs to just get fixed.
Sent from my DROID3 using Tapatalk
Jphatcher84 said:
Boot up go into dev tools and select bad behavior, crash system server it will reboot phone and you will have 3g.I know because I done this lol..it doesn't stick though so every time you reboot you will have to do this.. It's what I had to do until I got a Sim card....
Click to expand...
Click to collapse
using this method I got my 3g to work without a sim card. I bought the D3 off craigslist and it didn't have a vzw SIM card . :\
I use China Mobile 2g network, gprs normal, but the two sides call silent, to solve?
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
jonnyfartpant5 said:
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
Click to expand...
Click to collapse
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
try menu>setting>wireless and Networks> Mobile networks, to select your network
jonnyfartpant5 said:
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
Click to expand...
Click to collapse
Ok, since posting i have managed to Update the fiirmware to 2.3.3 gingerbread using odin. But am still unable to use it on o2/Tesco mobile or even on Tmobile now! Emergency calls only, and gives the error (mobile network not available). I might be wrong, but i suspect something like the firmware for the modem or something?..
jonnyfartpant5 said:
Ok, since posting i have managed to Update the fiirmware to 2.3.3 gingerbread using odin. But am still unable to use it on o2/Tesco mobile or even on Tmobile now! Emergency calls only, and gives the error (mobile network not available). I might be wrong, but i suspect something like the firmware for the modem or something?..
Click to expand...
Click to collapse
try setting the APN manually or changing modem
slipknot31 said:
try setting the APN manually or changing modem
Click to expand...
Click to collapse
i done the APN and no change.. i tried to flash the modem.. pretty sure it changed.. but how am i to know exactly what modem to be using? im from uk and i need it on o2/tesco mobile and its running 2.3.5 gingerbread at mo.. cheers
in Phone app dial *#06# and see if your imei is intact .. if it's gone then you have to flash a GB rom, root it again and return to CM10 . Use this guide if your imei is gone : [Guide]Upgrade SGS I9000 to 2.3.6 (Value Pack) & Root It
idCyber said:
in Phone app dial *#06# and see if your imei is intact .. if it's gone then you have to flash a GB rom, root it again and return to CM10 . Use this guide if your imei is gone : [Guide]Upgrade SGS I9000 to 2.3.6 (Value Pack) & Root It
Click to expand...
Click to collapse
hi i tried this tutorial, everything went smoothly, but still getting the same error. anything else i can try?
jonnyfartpant5 said:
hi i tried this tutorial, everything went smoothly, but still getting the same error. anything else i can try?
Click to expand...
Click to collapse
you can try manually set gsm band to 900mhz
McDown said:
you can try manually set gsm band to 900mhz
Click to expand...
Click to collapse
in network mode? to "gsm only" if so ... it didnt work
jonnyfartpant5 said:
in network mode? to "gsm only" if so ... it didnt work
Click to expand...
Click to collapse
no. in service mode.
dial *#2263# and choose gsm 900
McDown said:
no. in service mode.
dial *#2263# and choose gsm 900
Click to expand...
Click to collapse
still no luck
dial *#0011# to see if gsm 900 is active
McDown said:
dial *#0011# to see if gsm 900 is active
Click to expand...
Click to collapse
Ok I think I've worked out where the problem lies. Think it is a bad efs/imei as its displaying wrong after entering *#06# etc.. "004999010630000" grrr. So now need to work out how to get this back
Hey guys i have a problem.
I bought an LTE on T-mobile off ebay with a damaged digitizer. when i went to pick it up, the guy had his sim in and proved it accepted calls etc.
i got a new screen and did a factory restore. the new screen had a frame attached and i threw the old one away losing the IMEI number.
I get a t-mobile sim and activated it. i put it in the phone but it wouldnt pick up a signal at all.
it wouldnt detect a sim, even when i put in a sim from another network.
i checked settings and i says:
mobile network type: unknown
Service state: out of service
Mobile network state: disconnected
My phone number: unknown
ERI version: not avaliable
IMEI: unknown
i read online to try flashing a new ROM so i gave that a go but it didnt change anything.
i also read to check antenna connection but it connected ok and no damage on connectors.
does anyone have any idea what could be causing it and how i can solve it?
Flash Perseus Kernel and check that again
Sent from my GT-I9305 using xda premium
jjpro45 said:
Flash Perseus Kernel and check that again
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
ok will do that in a little while and will post results thankyou
it wont install it via sd-card. says signature verification fail.
will try it through odin now
odin wont recognise the file to flash it.
i downloaded the .tar zip file. any idea why it might not work?
Restore the IMEi backed up
http://forum.xda-developers.com/showthread.php?t=1946915
no backup then you need a service centre .
jje