Related
I'm about to use a Moto Milestone 1 charger for OB but I'm afraid that it may harm the phone. Both phones are listed with MicroUSB 2. Any tips?
thanks
Don't worry.. it will work Ok, but OB charger has 1000ma, if you use another charger that has let's say 500ma (like USB) it will take 3 hours to charge the phone instead of the regular 45 minutes!
I use a samsung cable directly from USB, the car USB port, a samsung 5530 charger, a LG optimus one charger, and they all worked, with various degrees of effectiveness!
The most useful one is the car's USB port that, even if it cannot keep up with the GPS (it charges slower than the battery drains), it can keep the phone running with 10% loss every hour with screen activated and GPS at the same time! The problem is that I hate radio and don't use CD's that much, and usually end up with the phone depleted before I reach the destination!
Thanks man! Ok I'll check that "ma" thing. BTW is it written on the battery or charger?
BoyBawang2 said:
Thanks man! Ok I'll check that "ma" thing. BTW is it written on the battery or charger?
Click to expand...
Click to collapse
Both places; battery specify working and standby V and mA, charger specify the V and mA provider
So you can use almost every different charger if the specs are the same, but be aware of this: don't use a charger with less mA since it can burn the charger
Ma - miliamps.
How many milliamps in 1 watt/volt? The answer is 1000.
I assume you are converting between milliampere and watt/volt.
I never had a burnt charger by the way, that would be very strange considering that the phone is accepting 500ma from the start (that is the USB output on any PC), and I even saw chargers with a power of 2W (SUPER FAST CHARGERS). The Motorola chargers are 850 ma usually, so it should work quite good!
Indeed, it's very strange to have a burnt charger and we don't need to go into an electrical discussion but that happens because of 2 possible things, very high-peak of voltage or prolonged use of under-voltage
mihaiolimpiu said:
The Motorola chargers are 850 ma usually, so it should work quite good!
Click to expand...
Click to collapse
Thanks. Printed on my Moto charger is 850mA so I'll rather use it for my OB next time.
BTW, currently I'm using a replacement charger for my OB with a name "super charger" printed "4.5v - 9.5v 800ma"
It's charging at normal duration in fact I'm using it for days. The only problem is that my OB touchscreen freaks out if I use it while that charger is connected. It's obvious when I run the multitouch testing app because touch points run all over the place. Touchscreen goes back to normal if I disconnect the charger. I tested that "super charger" to my milestone and the same abnormal thing happens to the screen. What causes it?
Probably it's something to do with high voltage... I'd avoid using it if something like that happens to my phone..
Usually the USB style chargers are pretty standard... the speed with which they work are strongly related to the power (Amperes) they provide, the voltage "should" be pretty standard!
mihaiolimpiu said:
Usually the USB style chargers are pretty standard... the speed with which they work are strongly related to the power (Amperes) they provide, the voltage "should" be pretty standard!
Click to expand...
Click to collapse
Like chargers with detachable MicroUSB cable?
BoyBawang2 said:
I'm about to use a Moto Milestone 1 charger for OB but I'm afraid that it may harm the phone. Both phones are listed with MicroUSB 2. Any tips?
thanks
Click to expand...
Click to collapse
Battery experts say to try and use a charger that's rated half the power of the battery.
So for a 1500 mAh battery, a charger of 850 mAh should be a better option than a 1000 mAh one.
Yes, the 1000 mAh charger would charge the battery faster than the 850 mAh one but it will decrease the lifetime of the battery faster.
Just for be able to post new thread. Sorry.
Hello, I don't want to start a new thread so I'll ask here.
The charger that came with my OB seems to be damaged. It was working properly until last last night. My phone detects the charger but it won't charge. Got powermax turned on and it automatically turned off when I connected the charger, so I know my charger does have issues.
Tried banging the charger last night, connected it to phone and started charging, woke up to see that it stopped charging 2 hours ago. It didn't even fully charge my phone. Now I'm charging it with my pc via the USB cable. I noticed that the touch screen goes wild when I use it while connected with the USB.
Now, I'm planning to buy a Galaxy S2 charger. Is it safe to use? S2 and OB has almost the same battery capacity so I'm considering it. Any other suggestions? OB ain't popular here in the Philippines so finding accessories is a real pain in the a**.
Fitted a Corby 2 charger and it seems like they use Mini-usb too. Haven't tried charging with it though.
My original charger also died... Now I use the one that came with my bluetooth headset
So I guess using the OB charger on other stuff is okay too. USB is always ~5v.
You need to test the charger with something else to be sure, though.
I had the same touchscreen freaking out problem with my old LG KS20, whenever I charged it. Like it was shorted or something. So it maybe a problem with the phone itself.
roltzy said:
My original charger also died... Now I use the one that came with my bluetooth headset
So I guess using the OB charger on other stuff is okay too. USB is always ~5v.
You need to test the charger with something else to be sure, though.
I had the same touchscreen freaking out problem with my old LG KS20, whenever I charged it. Like it was shorted or something. So it maybe a problem with the phone itself.
Click to expand...
Click to collapse
So, you agree that I use a Galaxy S2 charger? I think it would be fine since my friend with an S2 used my charger to charge his phone and it went well. I'll ask him to buy me one tomorrow. Tnx for reply
Ok kabayan, don't forget to share here the result after u try gs2 charger. I too am looking for safe alternative to my milestone charger.
Standard port - standard voltage
Don't even bother, if it has a micro USB it should be fallowing the same standard as USB for charging (5V)...
Of course test the charger for any adverse side effects like screen flickering or short battery life, and don't use it if something like that occurs, but because of the standardized voltage and the fact that usually phone chargers have between 500 - 1000 mA, 99% of chargers work...
I still haven't found any incompatible charger for my phone and I don't even buy a phone if it has a non standard Charging/Data Port... it's just stupid... so no Iphone for me!
BoyBawang2 said:
Ok kabayan, don't forget to share here the result after u try gs2 charger. I too am looking for safe alternative to my milestone charger.
Click to expand...
Click to collapse
mihaiolimpiu said:
Don't even bother, if it has a micro USB it should be fallowing the same standard as USB for charging (5V)...
Of course test the charger for any adverse side effects like screen flickering or short battery life, and don't use it if something like that occurs, but because of the standardized voltage and the fact that usually phone chargers have between 500 - 1000 mA, 99% of chargers work...
I still haven't found any incompatible charger for my phone and I don't even buy a phone if it has a non standard Charging/Data Port... it's just stupid... so no Iphone for me!
Click to expand...
Click to collapse
Hello guys! I'm here for an update. For the past week I've been using a Corby 2 charger. And guess what, it works just fine! only downside is it won't charge it up to 100% (usually gets to 99% upon unplugging). And it charges the phone a little slower than the original charger. I always let the phone overcharge overnight to have 100% battery.
Since somebody stole my laptop (and my charger too) I'm using a ZTE Blade charger without problems...
Huexxx said:
Since somebody stole my laptop (and my charger too) I'm using a ZTE Blade charger without problems...
Click to expand...
Click to collapse
FUC* stolen how ? this it`s baaaddd ....
I was wondering if anyone had a extra charger for this phone I really want to install a custom rom into it but I don't have any chargers that fit
Sent from my HERO200 using xda premium
Actually you don't even need a charger, just plug it to a pc or something that has a usb port. It's easier to find the cable than a charger and i am pretty sure that you already have a mini usb cable
Yes I have it,I buyed it on ebay about 1 year ago and it works fine!
I have a non original battery of 1800mAh and the charger works on both my batteries.
Search on ebay you will find it,I paid it less than 3 euro
I am looking for NEXUS 7 alternate charger which can charge at the same speed the Original Nexus 7 charger charges
unfortunately my nexus 7 original charger has been Burnt Becoz of Charging on UPS Inverter
and i cannot find the Geniune charger Locally
so is there any possiblity i can charge my NEXUS 7 to any other CELLPHONE charger which can charge it to the Same Speed what original does
i bought IPAD3 Charger and that one is charging too much slow need solution
pleasant said:
I am looking for NEXUS 7 alternate charger which can charge at the same speed the Original Nexus 7 charger charges
unfortunately my nexus 7 original charger has been Burnt Becoz of Charging on UPS Inverter
and i cannot find the Geniune charger Locally
so is there any possiblity i can charge my NEXUS 7 to any other CELLPHONE charger which can charge it to the Same Speed what original does
i bought IPAD3 Charger and that one is charging too much slow need solution
Click to expand...
Click to collapse
That's because the iPad charger doesn't have the data pins shorted out to enable fastcharge . Easiest way to accomplish fastcharge with your charger, is to buy a charging cable (data pins shorted out, so it is not a data cable:
http://dx.com/p/usb-male-to-lengthe...for-samsung-i9500-9300-htc-white-100cm-207353
It even has the lengthened micro usb connector the Nexus 7 needs.
Or maybe better, buy this one, found in another thread here on XDA, this one is confirmed to work in fastcharge mode with any usb charger:
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5457&seq=1&format=2
Good luck!
Sent from my Nexus 7 using xda app-developers app
rkuijpers said:
That's because the iPad charger doesn't have the data pins shorted out to enable fastcharge . Easiest way to accomplish fastcharge with your charger, is to buy a charging cable (data pins shorted out, so it is not a data cable:
http://dx.com/p/usb-male-to-lengthe...for-samsung-i9500-9300-htc-white-100cm-207353
It even has the lengthened micro usb connector the Nexus 7 needs.
Or maybe better, buy this one, found in another thread here on XDA, this one is confirmed to work in fastcharge mode with any usb charger:
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5457&seq=1&format=2
Good luck!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I am using the same cable that came with nexus 7 original charger only adaptor is being used of ipad
I use the blackberry playbook charger with no issues.
Much longer cable also.
pleasant said:
I am using the same cable that came with nexus 7 original charger only adaptor is being used of ipad
Click to expand...
Click to collapse
Yes I know, and that's the reason the iPad charger won't work on fastcharge.
You need to either shortout the data pins of the iPad charger, or use a charger cable with shorted data pins ( a so called charge-only micro usb cable) to make the iPad charger use full capacity (fastcharge mode). There are also cable adaptors for sale that will shortout the data pins for you.
Cryingmoose said:
I use the blackberry playbook charger with no issues.
Much longer cable also.
Click to expand...
Click to collapse
Yep, that one works because it follows the USB standard rules, and not the Apple USB standard.
No iDevice (iPhone/iPad) charger will fastcharge an android phone or tablet without modifying the datapins or use a charge-only cable / adaptor.
The Blackberry Playbook charger is known to work
Get an HP touchpad charger if you can. I can provide empirical evidence that it will actually charge your n7 20 minutes faster than the stock charger. I posted a thread about it here some time ago. "Best aftermarket charger ..." Or something like that.
Plus, my HP touchpad charger hasn't failed to work with whatever device I've plugged into it - idevice or android.
Sent from my Galaxy Nexus using xda app-developers app
vote for HP touchpad charger
pleasant said:
I am looking for NEXUS 7 alternate charger which can charge at the same speed the Original Nexus 7 charger charges
unfortunately my nexus 7 original charger has been Burnt Becoz of Charging on UPS Inverter
and i cannot find the Geniune charger Locally
so is there any possiblity i can charge my NEXUS 7 to any other CELLPHONE charger which can charge it to the Same Speed what original does
i bought IPAD3 Charger and that one is charging too much slow need solution
Click to expand...
Click to collapse
I will suggest the HP touchpad charger for use with the N7... they work great and produce no noticeable heat when not connected... shows good efficiency.:good:
Check Ebay -= just did a quick search and got 131 hits anywhere from 8-20 USD. I"ve bought 2... one is firmly set to be my preferred travel charger for any USB device.
+1 Re: HP Touchpad charger
Someone did a in depth look at factory and aftermarket chargers and it came out way better in terms of current provided and cleanliness of power without spikes or dropouts.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=2245915
zuberio said:
Get an HP touchpad charger if you can. I can provide empirical evidence that it will actually charge your n7 20 minutes faster than the stock charger. I posted a thread about it here some time ago. "Best aftermarket charger ..." Or something like that.
Plus, my HP touchpad charger hasn't failed to work with whatever device I've plugged into it - idevice or android.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Do I still need a aftermarket cable w/ the data pins shorted out? Or will this all in one package: http://www.ebay.com/itm/Genuine-HP-North-American-Power-Charger-FB341AA-AB-for-TouchPad-Cable-/251250614212?ssPageName=STRK:MESE:IT Do the trick?
magicdot said:
Do I still need a aftermarket cable w/ the data pins shorted out? Or will this all in one package: http://www.ebay.com/itm/Genuine-HP-North-American-Power-Charger-FB341AA-AB-for-TouchPad-Cable-/251250614212?ssPageName=STRK:MESE:IT Do the trick?
Click to expand...
Click to collapse
That will do the trick - but you don't need another cable if you already have one.
I went with the charger without cable option and got 2 chargers for less than that price. Just have eBay sort the search results by price+shipping and optionally USA sellers only to find a better price without waiting for a slow boat from China.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
containing ndoxima
bsoplinger said:
I went with the charger without cable option and got 2 chargers for less than that price. Just have eBay sort the search results by price+shipping and optionally USA sellers only to find a better price without waiting for a slow boat from China.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Will using chargers not putting out the proper amperage cause any hard ware issues? Just curious.
Thanks
bidzer said:
Will using chargers not putting out the proper amperage cause any hard ware issues?
Click to expand...
Click to collapse
If the charger puts out less than the tablet needs then it will just charge slower (or not at all if it's really low) and if it puts out more than the maximum the tablet uses the extra will just go unused. Voltage is a different issue.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
bidzer said:
Will using chargers not putting out the proper amperage cause any hard ware issues? Just curious.
Thanks
Click to expand...
Click to collapse
Having your device plugged into a USB 2 500mA computer port obviously charges slower then a 2000mA wall charger. It would be pretty faulty design if plugging your device into your computer would cause hardware damage.
Man, this really sucks, the Monoprice cable mentioned earlier in this thread is having the same issue I had with another micro USB cable, it doesn't seem to fit into the Nexus 7 snugly, it doesn't seem to go in all the way. (I hope I don't have a busted charging port), It doesn't seem to charge it at all, even with the stock Nexus AC adapter. I'm about to break down and buy the official Google charger again, even if all I need is a new micro USB cable.
I'm using 2 different monoprice cables, one in my car and one at home, and both fit well. Sounds like the port has gotten damaged.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
So, I just decided to buy a whole new charger off Amazon. If that won't work and I determine that the micro USB port is busted, I'm not going to be very happy, haha. does anyone know if Google repairs them for a fee?
I use a Playstation Vita charger which seems to charge my N7 very fast. On the other hand, I've tried an old mobile charger also and the battery level goes down whilst plugged into it.
If under warranty and purchased from the PlayStore, yes, otherwise, if under warranty, ASUS.
Hi guys,
I'm having an issue with the charging cables and my note, so I'd like to hear if someone has an answer to this thing.
In short, I have the official Samsung charger and a Note that's fully operational, no dirty contacts on the charger, no broken pins or anything.
When I use the short Samsung USB cable with the charger, my phone charges normally. Yesterday I bought a longer USB cable(1.8meters long) and the phone just discharges during charge if I use it.
What's the huge difference between these two cables that makes the one I bought not work with my phone? Does anyone know of a certain brand of cables that 100% works with Note that I can order from eBay? I really need a long charging cable, and this Samsung one just doesn't cut it.
Thanks for the replies!
Sent from my GT-N7000 using xda app-developers app
Try using a 2A charger..
I'm looking for a cable that I can use to take advantage of the full potential of my Anker wall charger. It uses Qualcomm quick charge but the cable it came with charges really slow. The lg stock cable is alright, but even my previous samsung cable is faster. Are there any cables out there that will allow my phone to charge faster? I hear a 28/24 gauge cable is faster, but is that dangerous to use?
Update: I ended up getting the 10ft Anker nylon braided charging cable because I have an Anker wall charger and I want a durable cable. I calculated the voltage drop over the length of the cable and decided it isn't enough to make a big difference so I went for it. Oddly enough I get a slightly higher charge rate than the 1ft cable that came with my wall charger! Thank you for all your input everyone!
Sent from my VS986 using XDA Free mobile app
I've seen good reviews of the Anker with its included cable.
How slow is it charging? You know that QC 2.0 is not fully implemented on the G4?
Ampere said around 500mah with the anker cable. But with my lg cable I got 1300+. This was all with the screen off, but when it's on for a while it goes down to 250mah. Does it really make that big of a drop? Is the g4 just a slow charging phone in general and there not much I can do to change that? I'm aware quick charge isn't fully implemented but I figured it should at least be reasonably faster than normal charging.
Sent from my VS986 using XDA Free mobile app
mike_n_ike said:
I'm looking for a cable that I can use to take advantage of the full potential of my Anker wall charger. It uses Qualcomm quick charge but the cable it came with charges really slow. The lg stock cable is alright, but even my previous samsung cable is faster. Are there any cables out there that will allow my phone to charge faster? I hear a 28/24 gauge cable is faster, but is that dangerous to use?
Sent from my VS986 using XDA Free mobile app
Click to expand...
Click to collapse
28/24???
If you want a good charging cable take one that is max AWG 20.
The higher the number is, the thinner cable inside is, the more it will "resist" to the current.
AWG20 will offer less resistance than AWG24 and so would charge faster.
Would this be a good cable to buy then? It is specifically for charging and the reviews seem promising.
http://www.amazon.com/PortaPow-Micro-USB-Cable-Charging/dp/B0088HTYUE
mike_n_ike said:
Would this be a good cable to buy then? It is specifically for charging and the reviews seem promising.
http://www.amazon.com/PortaPow-Micro-USB-Cable-Charging/dp/B0088HTYUE
Click to expand...
Click to collapse
It should since it is 20 AWG, but it is only for charging, no data on this one.
I personaly did bought an other brand :
http://www.amazon.com/Aukey-3-Pack-...UTF8&qid=1435505986&sr=1-2&keywords=Aukey+usb
It is not clearly stated in its description but it has :
28AWG for data
and
20AWG for charging
So it could charge as fast as the first one you quoted.
Yeah I don't need the data cable which is why I like that one. Does the length of the cable effect the charge speed noticeablely? I'm thinking of getting a long one
mike_n_ike said:
Yeah I don't need the data cable which is why I like that one. Does the length of the cable effect the charge speed noticeablely? I'm thinking of getting a long one
Click to expand...
Click to collapse
Yes.
Google a litle and you will find website that calculate* it for you.
* the loss of voltage, in heat etc... depending on the lenght and section of your cable
i only choose which highest stars in amazon
whatever anything i want to buy on internet,
i just choose something which highest stars in amazon.
Check the cables from portapow if your amazon has them - they are very good charging cables.
How fast?
sever-barre said:
How fast?
Click to expand...
Click to collapse
Seriously, all the cables that came with the Quick Charger 2.0 are the best and the stock cable too. I have purchased all kind of cables from Amazon including Portapow, which is the same as the QC 2.0 charger cable. The length of the cable also play a part. You really want to test it with a USB Doctor volt tester that support more than 7V. Ampere alone don't tell you the exact figure. I'll not spend any money for a standalone cable that claimed to be the fastest. I returned all those cable i got from Az.
Sent from my LG G4 H815 USA 4G LTE TMO
rogconnect said:
Seriously, all the cables that came with the Quick Charger 2.0 are the best and the stock cable too. I have purchased all kind of cables from Amazon including Portapow, which is the same as the QC 2.0 charger cable. The length of the cable also play a part. You really want to test it with a USB Doctor volt tester that support more than 7V. Ampere alone don't tell you the exact figure. I'll not spend any money for a standalone cable that claimed to be the fastest. I returned all those cable i got from Az.
Sent from my LG G4 H815 USA 4G LTE TMO
Click to expand...
Click to collapse
You say that you did return all your cables, but at the same time you advice to use a USB volt/amp to see what is the voltage...
So "seriously", that's not very serious
bleuxeon said:
You say that you did return all your cables, but at the same time you advice to use a USB volt/amp to see what is the voltage...
So "seriously", that's not very serious
Click to expand...
Click to collapse
I uses Anker and zerolemon QC 2.0 charger provided cable xddddd
Sent from my LG G4 H815 USA 4G LTE TMO
it's possible just a cable can let you chargering fast?i don't think so.....