hey
I'm looking for a 'stable' MIUIv4 (ICS) ROM
There to many and i don't know which i should download
Why miuiv4?
Sent from my GT-I9000 using XDA
Why Not?
Sent from my GT-I9000 using XDA
I've tested a lot and I liked Miuiv4 and other builds of miui. But wasn't happy with the battery life. Not happy about ICS. Then I found this review:
http://bit.ly/IeL9Hi
[ROM ICS]Tiramisu+ I.C.E. A.G.E. V.1.8 I'M DIFFERENT! [ANDROID 4.0.4][CNA 2.0.0]
This ROM is the best of all that I tested. Very simple to install and modify if your not happy about a kernel or modem or launcher or fonts etcetera.
Sent from my GT-I9000 using XDA
Thanks i'm gonna try it
Hi ! But could not get past the language page in aroma installation. Even after 3 tries.
Sent from my GT-I9000 using XDA
sammyservices said:
Hi ! But could not get past the language page in aroma installation. Even after 3 tries.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
You coming from which Rom ?
I wouldn't recommend you to use MIUIv4 roms right now, but that doesn't mean you can't. I tried WEUI 4.0.4, very unstable, bad battery life and it kept rebooting for some reason. I didn't like it that much, except the UI looks fantastic. Now running CM9 and I love it
Driv said:
You coming from which Rom ?
Click to expand...
Click to collapse
Are you on cwm 5.5? If not, that's the reason.
Sent from my GT-I9000 using XDA
cmiles said:
Are you on cwm 5.5? If not, that's the reason.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
ONLY TIRAMISU V. 1.7 I.C.E. A.G.E. and later
As always:
- Of course 100% charged battery and recalibrated (4-5 charging cycles)
- ESSENTIAL Having a backup of EFS folder!
Case 1 We are already on ICS? (Any Rom, Any Version, Any 4.0 +)
1) From Recovery Making Wipe of Data - Cache - Dalvik and only Format of System
2) Install the ROM
3) Restart
Case 2 We are on GB? (Froyo, Eclair, Donuts?)
1) After Flask Stock GB
2) After Flash modded Kernel
3) Flashing a kernel ics (I put the last midnight)
4) Once installed restart the phone, it goes bootloop -> remove the battery and put it back
5) Enter in recovery and then wipe all
6) Flashing the ROM
7) Restart
Sent from my GT-I9000 using XDA
cmiles said:
ONLY TIRAMISU V. 1.7 I.C.E. A.G.E. and later
As always:
- Of course 100% charged battery and recalibrated (4-5 charging cycles)
- ESSENTIAL Having a backup of EFS folder!
Case 1 We are already on ICS? (Any Rom, Any Version, Any 4.0 +)
1) From Recovery Making Wipe of Data - Cache - Dalvik and only Format of System
2) Install the ROM
3) Restart
Case 2 We are on GB? (Froyo, Eclair, Donuts?)
1) After Flask Stock GB
2) After Flash modded Kernel
3) Flashing a kernel ics (I put the last midnight)
4) Once installed restart the phone, it goes bootloop -> remove the battery and put it back
5) Enter in recovery and then wipe all
6) Flashing the ROM
7) Restart
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Why u telling me this ?
I succefully installed the Rom ..... It was not my question Read before you answer lol
Driv said:
Why u telling me this ?
I succefully installed the Rom ..... It was not my question Read before you answer lol
Click to expand...
Click to collapse
What did you choose for:
Kernel
Modem
Sent from my GT-I9000 using XDA
Not stable...
I had installed several versions of MIUI's and I can tell you that they're not stable. At least from my experience.
My last rom is MIUI V4 ASNET. Quite good. Battery wise is just ok when 3G is off that is. Out of nowhere, it kept fc's on me. Then I rebooted the phone. It entered CWM and I wasn't able to boot the phone after that. It kept going into CWM. The only way was to reflash the rom.
Currently, just flashed stock JVU with cf-root and thinking about the next rom to try.
MIUI V4 is not stablest ICS but in MIUI v4s this one is best:
http://android.gcfam.net/devs/andy/MIUIv4/
Andy's MIUI v4
Give it a time. he's ROCK.
Related
Hi folks... I am new here and this is my first post.
Recently bought a new Samsung Galaxy Note from the Samsung E Store. I am located in India.
Got the phone with ginger bread 2.3.6
Did update with kies desktop (for windows) to ICS 4.0.3
Got an OTA update for ICS 4.0.4 and did that as well
Saw the XXLRQ update available for the international variant of Galaxy Note and did that as well.
Saw an update available to 4.1.1 using paranoid android but phone got bricked on the process... Any help / Suggestions.....???
Need to know the best ROM as well as Kernel that I can upgrade my Note to.....
Note1305 said:
Hi folks... I am new here and this is my first post.
Recently bought a new Samsung Galaxy Note from the Samsung E Store. I am located in India.
Got the phone with ginger bread 2.3.6
Did update with kies desktop (for windows) to ICS 4.0.3
Got an OTA update for ICS 4.0.4 and did that as well
Saw the XXLRQ update available for the international variant of Galaxy Note and did that as well.
Saw an update available to 4.1.1 using paranoid android but phone got bricked on the process... Any help / Suggestions.....???
Need to know the best ROM as well as Kernel that I can upgrade my Note to.....
Click to expand...
Click to collapse
U on what kernel while install paranoid rom?
Sent from my GT-N7000 using xda premium
lee yun khong said:
U on what kernel while install paranoid rom?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi... The Kernel that comes along with German XXLRQ as given in the "ibt times" website...
You have any suggestions on what Kernel and ROM I can use for my GT-N7000 for best performance... I am looking for S III features, good battery life as well as All apps functioning well with a stable device....
Note1305 said:
Hi... The Kernel that comes along with German XXLRQ as given in the "ibt times" website...
You have any suggestions on what Kernel and ROM I can use for my GT-N7000 for best performance... I am looking for S III features, good battery life as well as All apps functioning well with a stable device....
Click to expand...
Click to collapse
u saidd u bricked ur phone.. is it working now..
the latest update of the note 4.0.4 has similar launcher as of s3..
hydracore and speedmod are safe kernels
Note1305 said:
Hi folks... I am new here and this is my first post.
Recently bought a new Samsung Galaxy Note from the Samsung E Store. I am located in India.
Got the phone with ginger bread 2.3.6
Did update with kies desktop (for windows) to ICS 4.0.3
Got an OTA update for ICS 4.0.4 and did that as well
Saw the XXLRQ update available for the international variant of Galaxy Note and did that as well.
Saw an update available to 4.1.1 using paranoid android but phone got bricked on the process... Any help / Suggestions.....???
Need to know the best ROM as well as Kernel that I can upgrade my Note to.....
Click to expand...
Click to collapse
You are not given useful information which procedure you followed to flash paranoid rom?
Enviado desde mi GT-N7000 usando Tapatalk 2
nokiamodeln91 said:
u saidd u bricked ur phone.. is it working now..
the latest update of the note 4.0.4 has similar launcher as of s3..
hydracore and speedmod are safe kernels
Click to expand...
Click to collapse
Nope.. its still bricked... I'm doing some R&D on it... ODIN is able to recognize it... planning to take it to the service center if it doesn't work. What I'm looking for is the best ROM as well as Kernel based on S III as well as touchwiz after I unbrick my phone. Most of my frenz suggest I NOT install XXLRQ German ROM / Kernel on my phone as it corrupts it after 45 dayz... give me some ideas please...
Note1305 said:
Hi... The Kernel that comes along with German XXLRQ as given in the "ibt times" website...
You have any suggestions on what Kernel and ROM I can use for my GT-N7000 for best performance... I am looking for S III features, good battery life as well as All apps functioning well with a stable device....
Click to expand...
Click to collapse
Im assume your devices still alive....
1). Root your devices with dr.ketan guide.
2.) Download speedmod k13-3 or hydracore 5.3 kernel. And flash it.
3). Download classic rom v6 ( stable and battery friendly)
4). Put v6 on your devices sd card.
5). Boot into recovery mode. And perform full wipe.
6. Install v6 rom. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
msedek said:
You are not given useful information which procedure you followed to flash paranoid rom?
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
The instructions I followed are as below -
"Instructions
Copy the ParanoidAndroid Jelly Bean ROM and the GApps package to your phone’s internal SD card.
Switch your phone off and boot into ClockworkMod Recovery. To do this, press and hold down the Volume Up, Home, and Power buttons together until the phone boots into recovery.
NOTE: You can use the Volume keys to navigate and the Power buttons to select an item or option in recovery.
Make a NANDroid backup of your current ROM in case of problems. To create a backup, go to Backup and Restore and select Backup.
Select Wipe data/factory reset and confirm the action on the next screen. Wait for the process to finish.
Select Wipe cache partition and confirm the action on the next screen.
Go to the main menu and select Advanced. From there, select Wipe Dalvik cache and confirm the action on the next screen.
Select Install ZIP from SD card.
Select Choose ZIP from SD card and navigate to the ParanoidAndroid Jelly Bean ROM ZIP file. Select the file and confirm the action on the next screen to start installing the ROM on your phone.
Once installation of the ROM is done, install the GApps package in the same manner as in steps 7 and 8.
After GApps is installed, select Go back and choose Reboot system now. This will reboot your phone to the newly installed ParanoidAndroid ROM.
NOTE: First boot may take up to 5 minutes.
Great job! Your Samsung Galaxy Note GT-N7000 is now running Android 4.1.1 Jelly Bean thanks to the ParanoidAndroid ROM."
I guess the German ROM / Kernel for XXLRQ are a scam... not sure though...
so i guess u wiped on a stock ICS kernel.
as u still have access to download mode ,,, just try to flash a GB rom and then reboot into recovery and do the wipes and check if the phone starts.
once it does u can think of installing PA JB
lee yun khong said:
Im assume your devices still alive....
1). Root your devices with dr.ketan guide.
2.) Download speedmod k13-3 or hydracore 5.3 kernel. And flash it.
3). Download classic rom v6 ( stable and battery friendly)
4). Put v6 on your devices sd card.
5). Boot into recovery mode. And perform full wipe.
6. Install v6 rom. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Does that give the same TouchWiz as well as features as that of Galaxy SIII or are you saying thats the most compatible ROM / Kernel for Galaxy Note... Please advice...
Note1305 said:
The instructions I followed are as below -
"Instructions
Copy the ParanoidAndroid Jelly Bean ROM and the GApps package to your phone’s internal SD card.
Switch your phone off and boot into ClockworkMod Recovery. To do this, press and hold down the Volume Up, Home, and Power buttons together until the phone boots into recovery.
NOTE: You can use the Volume keys to navigate and the Power buttons to select an item or option in recovery.
Make a NANDroid backup of your current ROM in case of problems. To create a backup, go to Backup and Restore and select Backup.
Select Wipe data/factory reset and confirm the action on the next screen. Wait for the process to finish.
Select Wipe cache partition and confirm the action on the next screen.
Go to the main menu and select Advanced. From there, select Wipe Dalvik cache and confirm the action on the next screen.
Select Install ZIP from SD card.
Select Choose ZIP from SD card and navigate to the ParanoidAndroid Jelly Bean ROM ZIP file. Select the file and confirm the action on the next screen to start installing the ROM on your phone.
Once installation of the ROM is done, install the GApps package in the same manner as in steps 7 and 8.
After GApps is installed, select Go back and choose Reboot system now. This will reboot your phone to the newly installed ParanoidAndroid ROM.
NOTE: First boot may take up to 5 minutes.
Great job! Your Samsung Galaxy Note GT-N7000 is now running Android 4.1.1 Jelly Bean thanks to the ParanoidAndroid ROM."
I guess the German ROM / Kernel for XXLRQ are a scam... not sure though...
Click to expand...
Click to collapse
How did you root the phone? And how did you get cwm?
Or you used stock recovery to flash the rom from external sd?
Enviado desde mi GT-N7000 usando Tapatalk 2
Note1305 said:
Does that give the same TouchWiz as well as features as that of Galaxy SIII or are you saying thats the most compatible ROM / Kernel for Galaxy Note... Please advice...
Click to expand...
Click to collapse
V6 was the lastest LR9 ics 4.04 based custom rom. Which S3 launcher from samsung was original come with that rom. It almost include all the available features from s3. But not 100%, such as smart stay you need to download from third parties.
You are looking for s3 launcher look , stable and battery friendly rom right?
V6 classic rom will the best choices.
Sent from my GT-N7000 using xda premium
i have mini with CM9 beta7(4.0.4)
but i want another ROM
stable, smoth, and battery saver
also, it doesnt matter what android version it is,
i need your advice
one more question,
if i have 4.04
do i have return to my stock to flash older android version?
aviranx said:
i have mini with CM9 beta7(4.0.4)
but i want another ROM
stable, smoth, and battery saver
also, it doesnt matter what android version it is,
i need your advice
one more question,
if i have 4.04
do i have return to my stock to flash older android version?
Click to expand...
Click to collapse
As for a rom I will recommend this http://forum.xda-developers.com/showthread.php?t=1793511
I personally uo ICS because it is more stable but also JB can be used every day.
i think you should try the slim cm 7 rom + adrenaline engine. it is the most stable, smooth, and light rom i've ever try.
Sent from my GT-S5570 using xda app-developers app
rickza said:
i think you should try the slim cm 7 rom + adrenaline engine. it is the most stable, smooth, and light rom i've ever try.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
can you give me links?
and what about my question:
i flash normaly, or first return to stock and than flash?
http://forum.xda-developers.com/showthread.php?t=1956127
go there and you can choose one of them. i prefer the cm7 because it didn't have any noticeable bug, it fast, and it battery friendly. it based on the mebitek's. you can flash it from any rom as long as you have CWM. the step to flash it:
1. download the rom, gapps, and the adrenaline engine (and the additional pack if you need them). put it on /sdcard
2. you can backup your app, message and callog by titanium backup or any backup apps.
3. restart
4. enter the cwm
5. do nandroid backup (for the worst case scenario)
6. do a complete wipe (system, partition, dalvik, battery)
7. flash the rom, gapps.
8. mount the /system
9. flash the adrenaline engine
9. do complete wipe again
10. restart your phone
11. you can restore your app, message and callog after your phone fully working.
Sent from my GT-S5570 using xda app-developers app
Basically I want to get smooth flash player working on my P990 and by looking at this old thread:
http://forum.xda-developers.com/showthread.php?t=1498458
Some guy says that he gets 720p smoothly over Flash Player with temasek's KANG ROM so the question is this:
I currently have a offical v20q rooted and installed CWM recovery, I downloaded the zip temasek's KANG ROM, so what now? Go to recovery and just flash? Or do I need to wipe format system or what?
Just tell me the few steps I'm missing do I need to do something in recovery before going to "install zip from SD card"?
PS: If somehow I don't like the temasek's KANG ROM, how do I revert back? Just make a backup of the current v20q and reflash the backup right?
I don't understand why you want to go CM7. It's old now. I personally never got smooth 720p on Temasek CM7. I recommend you to install stock based ICS ROM if you want to stay near stock or CM10 based ROM if you want AOSP feel. These ROMs should have even smoother Flash Player.
Sent from my LG-P990 using xda app-developers app
AW: [Q] Quick question will +REP
Erroneous91 said:
Basically I want to get smooth flash player working on my P990 and by looking at this old thread:
http://forum.xda-developers.com/showthread.php?t=1498458
Some guy says that he gets 720p smoothly over Flash Player with temasek's KANG ROM so the question is this:
I currently have a offical v20q rooted and installed CWM recovery, I downloaded the zip temasek's KANG ROM, so what now? Go to recovery and just flash? Or do I need to wipe format system or what?
Just tell me the few steps I'm missing do I need to do something in recovery before going to "install zip from SD card"?
PS: If somehow I don't like the temasek's KANG ROM, how do I revert back? Just make a backup of the current v20q and reflash the backup right?
Click to expand...
Click to collapse
I would also recommend an oval stock rom. Like django manuchete or optithrust. They are fast stable and battery friendly.
kaspar737 said:
I don't understand why you want to go CM7. It's old now. I personally never got smooth 720p on Temasek CM7. I recommend you to install stock based ICS ROM if you want to stay near stock or CM10 based ROM if you want AOSP feel. These ROMs should have even smoother Flash Player.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Sent from my LG-P990 using xda premium
I'm sorry for bothering you guys but I dont wanna fail WILL +REP
I decided to try out the "DjangoManouche" ROM, because it's stock based as you say.
These are the steps:
1 - Go to this Thread: http://forum.xda-developers.com/show....php?t=2020737
2 - Download the amazing AIO tool by Spyrosk and follow his guide to change partition layout from old to new (if you come from GB roms) and unlock bootloader
3 - Install 30 based CWM 5 or 6 (see OP)
4 - Install DjangoManouche
5 - Reboot After Install
6 - Enjoy
So if I got this right, I should go in the AIO tool and do option 4 first which is: " Change Partitions from OLD to NEW layout and vice versa",
then I should Install "30 based CWM 5 or 6", what a hell is that? I already have stock GB v20q rooted with CWM installed, what is a "30 based CWM 5 or 6 and where do I get it?
Thanks alot for your time, will +REP!
Erroneous91 said:
I decided to try out the "DjangoManouche" ROM, because it's stock based as you say.
These are the steps:
1 - Go to this Thread: http://forum.xda-developers.com/show....php?t=2020737
2 - Download the amazing AIO tool by Spyrosk and follow his guide to change partition layout from old to new (if you come from GB roms) and unlock bootloader
3 - Install 30 based CWM 5 or 6 (see OP)
4 - Install DjangoManouche
5 - Reboot After Install
6 - Enjoy
So if I got this right, I should go in the AIO tool and do option 4 first which is: " Change Partitions from OLD to NEW layout and vice versa",
then I should Install "30 based CWM 5 or 6", what a hell is that? I already have stock GB v20q rooted with CWM installed, what is a "30 based CWM 5 or 6 and where do I get it?
Thanks alot for your time, will +REP!
Click to expand...
Click to collapse
First, put the rom on external sd. Then, use option 4, you can automatically choose a CWM recovery which will be installed.
Sent from my LG-P990 using xda app-developers app
Thanks alot guys!
I successfully installed DjangoManouche ROM & the Adobe flash player is smooth!
This thread may be closed.
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
SOLVED - Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
g3ar said:
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
Click to expand...
Click to collapse
You should consider trying Pengus' CM10 ROM. I don't think you can find more stability in custom ROMs than his
You'll love the ROM, just give it a chance
But remember to do a full wipe (wipe system, data, cache and dalvik) before flashing the ROM.
Edit: You'll also find out bluetooth works perfectly fine on his ROM where the more recent ROMs don't have this fully functional.
So theres no fix type what shoud i do ?
Baseband 1035,21_20121130 . Kernel 2.6.39.4
Strange, BSODs should be a thing of the past. In most cases it was the kernel. Are you sure you flash the latest ROM versions with latest Kowalski kernel? Try to flash KK after ROM. If it doesn't help, phrase describe the problem more thoroughly. When is BSOD happening? During call?
Sent from my LG-P990 using xda app-developers app
So on stock v30a i dont have problems at all. I use aio toolkit option 4 .then install THE ROM tonyp. Bsod happens when i apply charger
Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
Sent from my LG-P990 using xda app-developers app
Man it looks like you solved my nightmare ! THANKS
Hi there,having similar problems using cm10.2 and all roms ,When phone times out its battery removal time,hot plug enabled but still turning off!Any help would be much appreciated thanks Glenn
Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)
MachineZZ said:
Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)
Click to expand...
Click to collapse
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.
kalpetros said:
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.
Click to expand...
Click to collapse
Thanks! I think to use Semaphore Kernel and CyanAOSP
MachineZZ said:
Thanks! I think to use Semaphore Kernel and CyanAOSP
Click to expand...
Click to collapse
That's a good choice. To take advantage of the Semaphore's kernel features download Semaphore Manager from Play Store.
If you want to overclock your device choose 1.2 MHz and the ondemand Governor. Also for 400+ MB of RAM choose the s Semaphore version and also download the Bigmem libs.
Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app
MachineZZ said:
Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can but not with Semaphore kernel. Mackay kernel supports up to 1.4 MHz.
Keep in mind that with clock speeds over 1.2 MHz you will experience a lot of crashes and reboots, your device will get hot etc.
Now i understood thanks!
Sent from my PAP3540DUO using XDA Free mobile app
When im installing the rom (CyanAOSP) and the kernel (Semaphore) is it need to have installed custom 4.3 or 4.4 ROM first ? Or i can install everyting from the stock rom ?
Sent from my PAP3540DUO using XDA Free mobile app
You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).
kalpetros said:
You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).
Click to expand...
Click to collapse
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?
MachineZZ said:
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?
Click to expand...
Click to collapse
Install the ROM first. Make sure to choose the correct Semaphore kernel for your ROM.
Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app
MachineZZ said:
Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
You only need to flash a kernel once you install the final ROM, in your case KK.
Thanks
Sent from my PAP3540DUO using XDA Free mobile app
be carefull
Hi to all
After to try upgrade my GT-I9000 by KIES (realy bad choice) my phone crash and can't coming back in original without any issues.
I was going and in samsung service to setback but the problems are still there.
Boot freezings and random of sorry the android.process.media has stopped. acore, keybord etc.
I try to fix them first by cache or apps settings but no luck- i was try everything.
Next step for - i had a feeling my phone is not dead and i can't to use it like this - is try to fount a rom in all net.
To many rom's and installs clears with full format or not - with xp,7 or 8 - but all they have same problems (slim,paranoid,etc.). Full of Sorry's that service or other has stop and press the ok every sec.or rom apps crash down or freezings and next black screen or freezing and many reboot's auto.
2 weeks try and try again. It must to save my phone.
And yesterday i try another rom.
1. set (must have) the I9000XXJVU_I9000OXAJVU_OXA by ODIN 1.83 with repartition s1_odin_20100512.pit
1st reboot auto and freezing again (many auto reboots) but final open the phone in settings.I didn't stop so must see the next step
2. Set Kernel by Odin again CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.
The phone reboot but boot over and over without go in. Again i didn't stop so i go in recovery (other way to take the install file) and mount usb (i can't go in phone) and take the ICS_4.0.3_MR1-RC4.2_I9000 rom in internal sd (no external sd and no sim in the phone).
3. Clear the data/factory, reset data cache and dalvic cache and install it (i can say the install it was slowest by the others rom's and more stady in the load bar).
No extra gapps files to install need.
The phone auto reboot and i wait with hope again.
Boom. The phone open in the setting without single problem.:victory:
The Ice Cream Sandwich 4.0 is there all works perfect !!!!!!!!!!!!!
I save my phone and is realy fast because the phone have a realy good hardwear.
So the Final answer is the rom must fit in your phone
I hope to help i wish a nice day to all.
Files ice Cream 4 Samsung GT-I 9000
Need 10 post to upload the links......:crying:
files ice 4.0 by text for SAMSUNG GT-I 9000
lordsaboteur said:
Need 10 post to upload the links......:crying:
Click to expand...
Click to collapse
That is the links by text file just copy and paste in anddress window bronser.