Database Develop

MIUIv4

hey
I'm looking for a 'stable' MIUIv4 (ICS) ROM
There to many and i don't know which i should download

Why miuiv4?
Sent from my GT-I9000 using XDA

Why Not?
Sent from my GT-I9000 using XDA

I've tested a lot and I liked Miuiv4 and other builds of miui. But wasn't happy with the battery life. Not happy about ICS. Then I found this review:
http://bit.ly/IeL9Hi
[ROM ICS]Tiramisu+ I.C.E. A.G.E. V.1.8 I'M DIFFERENT! [ANDROID 4.0.4][CNA 2.0.0]
This ROM is the best of all that I tested. Very simple to install and modify if your not happy about a kernel or modem or launcher or fonts etcetera.
Sent from my GT-I9000 using XDA

Thanks i'm gonna try it

Hi ! But could not get past the language page in aroma installation. Even after 3 tries.
Sent from my GT-I9000 using XDA

sammyservices said:
Hi ! But could not get past the language page in aroma installation. Even after 3 tries.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
You coming from which Rom ?

I wouldn't recommend you to use MIUIv4 roms right now, but that doesn't mean you can't. I tried WEUI 4.0.4, very unstable, bad battery life and it kept rebooting for some reason. I didn't like it that much, except the UI looks fantastic. Now running CM9 and I love it

Driv said:
You coming from which Rom ?
Click to expand...
Click to collapse
Are you on cwm 5.5? If not, that's the reason.
Sent from my GT-I9000 using XDA

cmiles said:
Are you on cwm 5.5? If not, that's the reason.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
ONLY TIRAMISU V. 1.7 I.C.E. A.G.E. and later
As always:
- Of course 100% charged battery and recalibrated (4-5 charging cycles)
- ESSENTIAL Having a backup of EFS folder!
Case 1 We are already on ICS? (Any Rom, Any Version, Any 4.0 +)
1) From Recovery Making Wipe of Data - Cache - Dalvik and only Format of System
2) Install the ROM
3) Restart
Case 2 We are on GB? (Froyo, Eclair, Donuts?)
1) After Flask Stock GB
2) After Flash modded Kernel
3) Flashing a kernel ics (I put the last midnight)
4) Once installed restart the phone, it goes bootloop -> remove the battery and put it back
5) Enter in recovery and then wipe all
6) Flashing the ROM
7) Restart
Sent from my GT-I9000 using XDA

cmiles said:
ONLY TIRAMISU V. 1.7 I.C.E. A.G.E. and later
As always:
- Of course 100% charged battery and recalibrated (4-5 charging cycles)
- ESSENTIAL Having a backup of EFS folder!
Case 1 We are already on ICS? (Any Rom, Any Version, Any 4.0 +)
1) From Recovery Making Wipe of Data - Cache - Dalvik and only Format of System
2) Install the ROM
3) Restart
Case 2 We are on GB? (Froyo, Eclair, Donuts?)
1) After Flask Stock GB
2) After Flash modded Kernel
3) Flashing a kernel ics (I put the last midnight)
4) Once installed restart the phone, it goes bootloop -> remove the battery and put it back
5) Enter in recovery and then wipe all
6) Flashing the ROM
7) Restart
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Why u telling me this ?
I succefully installed the Rom ..... It was not my question Read before you answer lol

Driv said:
Why u telling me this ?
I succefully installed the Rom ..... It was not my question Read before you answer lol
Click to expand...
Click to collapse
What did you choose for:
Kernel
Modem
Sent from my GT-I9000 using XDA

Not stable...
I had installed several versions of MIUI's and I can tell you that they're not stable. At least from my experience.
My last rom is MIUI V4 ASNET. Quite good. Battery wise is just ok when 3G is off that is. Out of nowhere, it kept fc's on me. Then I rebooted the phone. It entered CWM and I wasn't able to boot the phone after that. It kept going into CWM. The only way was to reflash the rom.
Currently, just flashed stock JVU with cf-root and thinking about the next rom to try.

MIUI V4 is not stablest ICS but in MIUI v4s this one is best:
http://android.gcfam.net/devs/andy/MIUIv4/
Andy's MIUI v4
Give it a time. he's ROCK.

Getting back to 2.3 from ICS

Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?

mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2

Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway

Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2

Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel

From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium

Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first

you cant build a house without foundation! flashing the kernel first is only proper way to do this!

1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done

zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!

It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA

Custom roms

Hi guys,
Well I'm a android user and I have a SE Arc S and I know quite a few things about flashing new roms, kernels, etc...
My girlfriend has a galaxy mini and she's complaning about the phone's performance. So I want to install a custom rom with a better performance but I know little about the "how to" in Samsung.
I've searched but I couldn't find any tutorial. Can someone post a link please?
Thanks
EDIT: Found the tutorials but in SE phone we have to unlock the bootloader, is it necessary on the Galaxy minis? Or is it just flashing through CWM recovery?!

Try here www.yagyagaire.blogspot.com I'm sure you'll find some info

If you have understood methods then Try flashing CM7 (or ROMs based on cm7) for best customizations or try Emanon v6 for touchwiz look and better stability....
sent from my GT-I9300 using xda premium
Hit thnx it will take your 1KB only..

dont have to unlock bootloader in samsung...just install CWM recovery,and you good to go..
CWM Recovery:- http://forum.xda-developers.com/showthread.php?t=1439751

rom
use the aokp milestone revo 2 by the whisp running on 4.4.1

adityalahiri13 said:
use the aokp milestone revo 2 by the whisp running on 4.4.1
Click to expand...
Click to collapse
it's running 4.0.4 not 4.4.1

For Daily uses, u can try CM7 with the stable one.
http://get.cm/?device=tass&type=stable
How to install custom rom:
1st: the device must have OS Gingerbread 2.3.x
2nd: install CWM via Odin
3rd: install custom rom ( .zip file ) from CWM (recovery mode)

it's running 4.0.4

[Q] Samsung Galaxy S+ Questions

A few days ago I had 2.3.6 and updated to [ROM][ICS][IMM76L] CyanogenMod 9 RC (Build 2).
I made a backup before this, with CWM6. If I want to have my original android, 2.3.6, all I have to do is to restore that backup with CWM6?
Second question: I want to install [JB][ROM][CM10]SmoothieJB™ Smooth,Stable, Fast ϟ - v2 08.12.12. The instalation tutorial says this:
Installation
• Take a full backup ( be sure to do this )
• Wipe data and cache.
• Flash Smoothie-v2.zip.
• Flash Gapps.
• Fix Permissions
• Reboot.
• Most important step : Enjoy!
Click to expand...
Click to collapse
This is for Ginger only or for me too?
What "Fix Permissions" means? When I installed CM9, I didn't have to do that.
And something else: What is the best ROM for this
Sawyer303 said:
Doesn't matter if GB,ICS or JB, all I want is to be fast, no lag. I don't care about gaming, I play sometimes small games, not GTA and games that need resources.
Click to expand...
Click to collapse

Sawyer303 said:
A few days ago I had 2.3.6 and updated to [ROM][ICS][IMM76L] CyanogenMod 9 RC (Build 2).
I made a backup before this, with CWM6. If I want to have my original android, 2.3.6, all I have to do is to restore that backup with CWM6?
Second question: I want to install [JB][ROM][CM10]SmoothieJB™ Smooth,Stable, Fast ϟ - v2 08.12.12. The instalation tutorial says this:
This is for Ginger only or for me too?
What "Fix Permissions" means? When I installed CM9, I didn't have to do that.
And something else: What is the best ROM for this
Click to expand...
Click to collapse
First Question - I don't know about this , but if you want to restore it , you need to full wipe first and then restore
Second Question - Just go the Advance panel at CWM and fix permission
Third Question - Try using CM9 by Acro or latest CM10 by Ivendor

I have CM9 by arco: [ROM][ICS][IMM76L] CyanogenMod 9 RC (Build 2)
CM10 by Ivendor is better for what I need?

For me CM9 is more stable than CM10 , but it's up to you , there many plenty ROM in the forum
Sent from my GT-I9001 using Tapatalk 2

Can somene answer my first question? I want to be sure and not brick my phone.

Sawyer303 said:
Can somene answer my first question? I want to be sure and not brick my phone.
I made a backup before this, with CWM6. If I want to have my original android, 2.3.6, all I have to do is to restore that backup with CWM6?
Click to expand...
Click to collapse
Just restore it from backup with CWM6. You can do full wipe first if you want but I don't think it's necessary. The only thing I suggest you to do is do backup your existing CM9. From now you will have 2 backups: GB & CM9 just in case something goes wrong with restoring. I would not expect you to brick the phone with restoring the backup - I have done it 100 times already and nothing like this has never happened to me.

First question:
you should flash a gb rom first because on my old phone (galaxy ace) the stock samsung rom use another file system
and 3. question, i think cm10 is much smoother and more battery friendly than cm9 but just try yourself
Sent from my GT-I9001 using xda premium

Re: 1st question - I tested this today on my own phone. If you want to restore either GB, ICS or JB you don't need to wipe anything and you don't need to instal any roms at first. All you need to do is restore backup. It is because recovery formats partitions and wipe all data before it restores from backup.

1st question: just restore the backup without Doping anything before
2nd one: the guide is for every Rom except smoothie JB then you have to only wipe cache and dalvik cache
Fix permissions is under advanced
3rd: if you want ics try cm by arco or biohazard and the castagnait kernel 7.5 extreme uv
And if you want JB try cm10 by ivendor or aokp Jb by crybert and the actual 2.6 diablo kernel
Hope i helped

chinese language
Guys I'm using [ROM][ICS][SmoothieICS v1.Do you know any way to add chinese language.appreciate

[Q] Choosing the right ROM and Kernel for Samsung GALAXY S GT-I9000

Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)

MachineZZ said:
Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)
Click to expand...
Click to collapse
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.

kalpetros said:
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.
Click to expand...
Click to collapse
Thanks! I think to use Semaphore Kernel and CyanAOSP

MachineZZ said:
Thanks! I think to use Semaphore Kernel and CyanAOSP
Click to expand...
Click to collapse
That's a good choice. To take advantage of the Semaphore's kernel features download Semaphore Manager from Play Store.
If you want to overclock your device choose 1.2 MHz and the ondemand Governor. Also for 400+ MB of RAM choose the s Semaphore version and also download the Bigmem libs.

Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app

MachineZZ said:
Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can but not with Semaphore kernel. Mackay kernel supports up to 1.4 MHz.
Keep in mind that with clock speeds over 1.2 MHz you will experience a lot of crashes and reboots, your device will get hot etc.

Now i understood thanks!
Sent from my PAP3540DUO using XDA Free mobile app

When im installing the rom (CyanAOSP) and the kernel (Semaphore) is it need to have installed custom 4.3 or 4.4 ROM first ? Or i can install everyting from the stock rom ?
Sent from my PAP3540DUO using XDA Free mobile app

You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).

kalpetros said:
You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).
Click to expand...
Click to collapse
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?

MachineZZ said:
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?
Click to expand...
Click to collapse
Install the ROM first. Make sure to choose the correct Semaphore kernel for your ROM.

Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app

MachineZZ said:
Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
You only need to flash a kernel once you install the final ROM, in your case KK.

Thanks
Sent from my PAP3540DUO using XDA Free mobile app

be carefull
Hi to all
After to try upgrade my GT-I9000 by KIES (realy bad choice) my phone crash and can't coming back in original without any issues.
I was going and in samsung service to setback but the problems are still there.
Boot freezings and random of sorry the android.process.media has stopped. acore, keybord etc.
I try to fix them first by cache or apps settings but no luck- i was try everything.
Next step for - i had a feeling my phone is not dead and i can't to use it like this - is try to fount a rom in all net.
To many rom's and installs clears with full format or not - with xp,7 or 8 - but all they have same problems (slim,paranoid,etc.). Full of Sorry's that service or other has stop and press the ok every sec.or rom apps crash down or freezings and next black screen or freezing and many reboot's auto.
2 weeks try and try again. It must to save my phone.
And yesterday i try another rom.
1. set (must have) the I9000XXJVU_I9000OXAJVU_OXA by ODIN 1.83 with repartition s1_odin_20100512.pit
1st reboot auto and freezing again (many auto reboots) but final open the phone in settings.I didn't stop so must see the next step
2. Set Kernel by Odin again CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.
The phone reboot but boot over and over without go in. Again i didn't stop so i go in recovery (other way to take the install file) and mount usb (i can't go in phone) and take the ICS_4.0.3_MR1-RC4.2_I9000 rom in internal sd (no external sd and no sim in the phone).
3. Clear the data/factory, reset data cache and dalvic cache and install it (i can say the install it was slowest by the others rom's and more stady in the load bar).
No extra gapps files to install need.
The phone auto reboot and i wait with hope again.
Boom. The phone open in the setting without single problem.:victory:
The Ice Cream Sandwich 4.0 is there all works perfect !!!!!!!!!!!!!
I save my phone and is realy fast because the phone have a realy good hardwear.
So the Final answer is the rom must fit in your phone
I hope to help i wish a nice day to all.

Files ice Cream 4 Samsung GT-I 9000
Need 10 post to upload the links......:crying:

files ice 4.0 by text for SAMSUNG GT-I 9000
lordsaboteur said:
Need 10 post to upload the links......:crying:
Click to expand...
Click to collapse
That is the links by text file just copy and paste in anddress window bronser.