Related
Having not seen it done already, I decided to try to deodex some of the XOOM apps from the system dump and see if they would install on the API Level 11 HC SDK image. However, it seemed like Baksmali was broken. I googled and saw this...
http://code.google.com/p/smali/issues/detail?id=58#c0
Anyone find a workaround? That AOSP release can't drop soon enough.
Anyone? Would this thread perhaps do better in the Themes and Apps forum? Maybe I'll ask a mod to move there if that's the consensus. There's no development going on with it yet so it probably doesn't belong there.
10 charact
..........
Also reserved please
This sounds like something that can kill a lot if time while I'm in the office.
What are we looking for when doing this?
Sent from my DROID BIONIC using xda premium
ROB281 said:
This sounds like something that can kill a lot if time while I'm in the office.
What are we looking for when doing this?
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Well, I'll get to the point soon. still modifying the post. but basically the gist of it is to check ALL of motorola's update servers for updates, not just the one that comes programmed into the device. If we're lucky and we find a hidden update, we may be able to get an unlocked bootloader (or other goodies?), which will allow us to use our device as we please (new kernels, better mods, etc)
Thanks for writing this up, I've been hesitant to try it since some of the paths/files in other posts did not exist on the Bionic.
Sent from my DROID BIONIC using XDA App
karthakon said:
Thanks for writing this up, I've been hesitant to try it since some of the paths/files in other posts did not exist on the Bionic.
Sent from my DROID BIONIC using XDA App
Click to expand...
Click to collapse
Well, I was bold and basically just created the files. When I ran the *#*#4636#*#* test, I found that it did indeed change my could update server.
also the com.motorola.blur.setup was in /data/data/ and not the system/etc/motorola.
Thank you.
Sent from my ADR6400L using xda premium
Thank you for this. The previous directions were based on the Atrix so there were a lot of files listed that I never saw so I felt unsafe just making them up and moving things around. I'll get on this sometime in the very near future.
K.AuthoR said:
Thank you for this. The previous directions were based on the Atrix so there were a lot of files listed that I never saw so I felt unsafe just making them up and moving things around. I'll get on this sometime in the very near future.
Click to expand...
Click to collapse
I actually have been testing some methods that may not even req a wipe in between or possible before
Sent from my DROID BIONIC using Tapatalk
Apparently someone found an update somewhere. Good sign. I'm going to check it out in an hour or two. Don't have my hands on it yet.
Sent from my DROID BIONIC using Tapatalk
Looking at these right now. I'll go ahead and update the main thread with your corrections. Thank you for figuring it out!!!!
kennethpenn said:
Looking at these right now. I'll go ahead and update the main thread with your corrections. Thank you for figuring it out!!!!
Click to expand...
Click to collapse
when I hit the server, it says it's a 5.5.886 -> 5.5.891 update
phydo said:
when I hit the server, it says it's a 5.5.886 -> 5.5.891 update
Click to expand...
Click to collapse
Just so everyone can see it: the update label will always be for the build ID that the zip is supposed to be installed over. That means if you've got an update:
Blur_Version.1.XT875.Verizon.en.US.zip --> This means the zip should be installed over devices running Build number "1."
Blur_Version.5.5.886.XT875.Verizon.en.US.zip --> This means the zip should be installed over devices running Build number "5.5.886."
Was anyone ballsy enough to attempt to install the update? It doesn't have a bootloader inside, but it may still be dangerous.
P3 flashed it and it does absolutely contain a bootloader update.
The critical pieces are the mbm.bin, mbmloader_hs.bin and mbmloader_ns.bin.
HS and NS refer to Hardware Secure and Non Secure parts and both are included in these updates because both types of hardware are present in the test groups or whomever is the intended recipient of these files.
There is not an unlock, per se, but both secured and unsecured mbmloaders are present and the updater script has a check for the ro.secure status and loads the appropriate file for the target device.
The D3 update and assumedly this file as well cannot be reverted to stock release version, so this file must be regarded very carefully and assessed before any decision to flash or not is made.
There is a LOT more discussion we need to have about these files and OMAP SoCs I think regarding the differences between them and the Tegra II SoCs and fuse arrays!
Edit: This breaks the djrbliss root method using the tcmd exploit. We need to look further and discuss with him other possibilities for root. Reverting has not been established yet and may brick since we dont have a complete XML.zip.
WARNING!!!! This is a very dangerous file to flash at this stage!!! Please do not rush into testing it yet!!!
Thanks to those who got the file and thanks to P3Droid for guinea pigging.
Oh and I have to add that clarified cheescake is an oxymoron...you garnish cheesecake with wonderful things!
cellzealot said:
P3 flashed it and it does absolutely contain a bootloader update.
The critical pieces are the mbm.bin, mbmloader_hs.bin and mbmloader_ns.bin.
HS and NS refer to Hardware Secure and Non Secure parts and both are included in these updates because both types of hardware are present in the test groups or whomever is the intended recipient of these files.
There is not an unlock, per se, but both secured and unsecured mbmloaders are present and the updater script has a check for the ro.secure status and loads the appropriate file for the target device.
The D3 update and assumedly this file as well cannot be reverted to stock release version, so this file must be regarded very carefully and assessed before any decision to flash or not is made.
There is a LOT more discussion we need to have about these files and OMAP SoCs I think regarding the differences between them and the Tegra II SoCs and fuse arrays!
Edit: This breaks the djrbliss root method using the tcmd exploit. We need to look further and discuss with him other possibilities for root. Reverting has not been established yet and may brick since we dont have a complete XML.zip.
WARNING!!!! This is a very dangerous file to flash at this stage!!! Please do not rush into testing it yet!!!
Thanks to those who got the file and thanks to P3Droid for guinea pigging.
Oh and I have to add that clarified cheescake is an oxymoron...you garnish cheesecake with wonderful things!
Click to expand...
Click to collapse
So I decided that I just couldn't sleep not knowing if the root patch had been fixed. So I decided to flash the update.zip. And what I expected to happen, happened, it zapped the local.prop exploit.
So here I sit on the new build unrooted and stock. I'm fairly certain that if I try to revert back to the OG build I will have a paper weight on my desk until a full xml fastboot file can be found. I would suggest you all wait and don't flash this yet.
jimmydafish said:
So I decided that I just couldn't sleep not knowing if the root patch had been fixed. So I decided to flash the update.zip. And what I expected to happen, happened, it zapped the local.prop exploit.
So here I sit on the new build unrooted and stock. I'm fairly certain that if I try to revert back to the OG build I will have a paper weight on my desk until a full xml fastboot file can be found. I would suggest you all wait and don't flash this yet.
Click to expand...
Click to collapse
thats what i call takin one for the team!!! thanks bro!!! You'll be rooted again in no time, maybe even s-off!!!
Enzopreme said:
thats what i call takin one for the team!!! thanks bro!!! You'll be rooted again in no time, maybe even s-off!!!
Click to expand...
Click to collapse
S-off doesn't apply to Moto products...
Sent from my DROID BIONIC using xda premium
cellzealot said:
P3 flashed it and it does absolutely contain a bootloader update.
The critical pieces are the mbm.bin, mbmloader_hs.bin and mbmloader_ns.bin.
HS and NS refer to Hardware Secure and Non Secure parts and both are included in these updates because both types of hardware are present in the test groups or whomever is the intended recipient of these files.
There is not an unlock, per se, but both secured and unsecured mbmloaders are present and the updater script has a check for the ro.secure status and loads the appropriate file for the target device.
The D3 update and assumedly this file as well cannot be reverted to stock release version, so this file must be regarded very carefully and assessed before any decision to flash or not is made.
There is a LOT more discussion we need to have about these files and OMAP SoCs I think regarding the differences between them and the Tegra II SoCs and fuse arrays!
Edit: This breaks the djrbliss root method using the tcmd exploit. We need to look further and discuss with him other possibilities for root. Reverting has not been established yet and may brick since we dont have a complete XML.zip.
WARNING!!!! This is a very dangerous file to flash at this stage!!! Please do not rush into testing it yet!!!
Thanks to those who got the file and thanks to P3Droid for guinea pigging.
Oh and I have to add that clarified cheescake is an oxymoron...you garnish cheesecake with wonderful things!
Click to expand...
Click to collapse
I suppose I was looking for the wrong things. On other devices, "ap20bl.img" was responsible for bringing such goodies as an unlock capability.
Welcome to the [STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD formally the DISCUSSION GUIDE
This is the Official Index Roll up thread for the I9505G Google Edition Galaxy S IV. In this Index you will find helpful, links, guides, how to's and instructions for your I9505G.
Please Post any links or helpful information in this thread or you can PM me so I can link it in the OP ( If your on the I9505/I9500 Please do NOT ASK about development for your device this is for the I9505G ONLY
(DISCLAIMER) As always I nor anyone is responsible if you cannot follow instructions in this or any other thread. We assume NO liability for bricks, loss of job, or the end of life as we know it.
GUIDES & LINKS
How to get CM 10.1 & CM 10.2 working on the I9505G
How Unlock the Bootloader for the I9505G
[OTA] OTA ZIP 4.3 for I9505G
How to Update your Baseband to get the 4.3 OTA
TOUCHWIZ Development Thread Q&A
Camera Save to SD Card for Google Edition ROM's
I9505G How to Set Device Mount Points in Android Kitchen GE S IV
4.3 SD Card Issue Fixed
How to upgrade a Stock+Root+Custom_Recovery I9505G from 4.3 to 4.4 and keep all Data
ROOTING THREADS
How to Root 4.2, 4.3, 4.4 JB, Kit Kat I9505G
ROM's
[ROM][Linaro-4.8] XenonHD-4.4.2 Alpha 1 (5/1/14) *Truly Stable, Fast & Butter
GOOGLE LITE EDITION 4.2.2 v.2 MFD
GOOGLE LITE EDITION 4.3 I9505GUEUBMH1 Ktoonsez Kernel
TOUCHLITE GE TOUCHWIZ ROM
[ROM] Google Edition 4.3 [Clean][Deodex][276MB]
RECOVERY
How to install TWRP via Odin on the I9505G
TWRP for the I9505G
[BETA][RECOVERY] ClockworkMod Recovery 6.0.3.6
[ODIN[TAR] Stock Recovery Images
MODEMS
ODIN TAR MODEMS
STOCK FIRMWARE LEAKS
Stock ODIN FIRMWARE Leaked 4.3 MFP
Stock ODIN FIRMWARE Leaked 4.3 MG8
ODIN AND HEIMDAL PACKAGES
Stock HEIMDAL 4.2.2 MFD back to Stock
[ODIN][TAR] I9505GUEUAMFD 4.2.2 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMH1 4.3 Full Rooted Restore
[ODIN][TAR] I9505UEUBMH5 4.3 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMKG 4.4 Full Rooted Restore
[ODIN][TAR] I9505GUEUBML4 [4.4.2] Full Rooted Restore
[ODIN][TAR] 4.4.3 I9505GUEUCNE3 Full Rooted Restore
[ODIN][TAR] 4.4.4 I9505GUEUCNF3 Full Rooted Restore
Reserved
Big Thanks to Illogic6 for being the Very 1st Person to get Touchwiz Booted to the I9505G post #31 and SamuriHL for solving the Baseband Update Issue and Chainfire
Modem Update : Due to the secure boot loader we cannot flash modems via cwm or any other custom recovery. You MUST update your firmware via Odin
Touchwiz Works with some ROM's like BareBones from the I9505 forum being successfully booted on the I9505G. TW Development is ongoing for the I9505G but with the small partition size some issues exist, and are being researched and worked out.
http://forum.xda-developers.com/showthread.php?t=2405273
11/28/2013 : KitKat initial release this week New Updated Odin Packages and ROM's please check A&D section
DONT FORGET TO THANK THE MEMBERS AND DEVS WORKING HARD ON THE I9505G DEVELOPMENT
07/21/2014: I just wanted to make a note that I still get emails and requests for help and although I am no longer doing any sort of work on the I9505G I will try to help you out if you PM me. PLEASE BIG THANK YOU TO @SamuraiHL he is really the one maintaining everything for I9505G Owners and if you have not thanked him please do. Actually without volunteering him he is your best POC for anything current. I will maintain the thread for organization now and then. ALOHA
MJHawaii said:
Reserved :good:
Click to expand...
Click to collapse
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.
wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
wilbarger said:
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.
Click to expand...
Click to collapse
That's what this thread is for though for everyone to get together share information and collaborate.
Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
I saw Chahk post and it is helpful this is where I'm at right now read above. I did pm Chahk and a few others for help. I will work on it a little later this weekend
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Sent from my GT-I9505G using Tapatalk 2
irishrally said:
Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
Click to expand...
Click to collapse
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!
illogic6 said:
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!
Click to expand...
Click to collapse
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.
illogic6 said:
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.
Click to expand...
Click to collapse
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
illogic6 said:
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion?
Click to expand...
Click to collapse
I think this might be fixed in the newest CM nightly. I've took about 20 selfies with the front facing camera and haven't had distortion at all. Before I'd get it every 3 or 4 photos.
Edit: Disregard the above. The problem is back, but I'm thinking it might be the 4.3 camera zip I've been using. Hmmmmmmm......
I think I jumped the gun a bit on rooting my I9505G right when I got it. I've never successfully rooted it, but I managed to get on the 4.3 ROM with a few quirks here and there. My ultimate goal is to get Paranoid Android with halo running, but I'll have to dedicate a day to the whole process. I'll be keeping track of this thread.
illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Thanks a lot I will take a look tomorrow and see what I can do
Sent from my GT-I9505G using Tapatalk 2
illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.
illogic6 said:
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.
Click to expand...
Click to collapse
Wow Illogic your close bro thanks for your hard work the libs does sound like it would cause the display problem I'm gonna play around with this too. All I did was unpack stock 4.3 and zip and deo the files with root. The problem I am having is that I am still learning U-scripts and so I cannot get anything to flash. I get failed on 0p21 even though its changed. Maybe I can pm you what I did later and get your feedback cuz your miles ahead of me
Sent from my GT-I9505G using Tapatalk 2
I've merged libs from the leaked 4.3 build into the TW ROM without overwriting anything. Didn't seem to change anything. At this point, I'm playing with magic I don't understand so not sure how much farther I'm going to get.
Would really like figure out which files in the system are responsible for the display. Perhaps we need to overwrite those files. Google is failing me so far.
---------- Post added at 04:45 PM ---------- Previous post was at 04:29 PM ----------
Tada! :victory:
The error message goes away. Right now, the web browser force closes... that might be because of the ROM I was modifying. What I did was use the 4.2.2 kernel that shipped with the google play phones. That booted AND activated the display.
http://i.imgur.com/HZaraPK.jpg
All
I'm about to receive a device that requires BLE (Bluetooth 4.0) and the only device i have with the potential to connect is my Nook. Do any of the ROMs support BLE? I know this question has been posed specifically in the CM 10.2 and 11 threads but i didn't see mention elsewhere. Does anyone know? Thanks
Well I may have answered my own question.
I am running CM10.2 on my Nook HD+ and I decided to search for a flashable BLE zip. Since essentially support for it just needs to be enabled I figured I might as well see if I could find one.
I found a zip for the Nexus that supports any 4.3 based ROM so I figured I'd flash it, made a nandroid backup and gave it a shot.
Appears it may work, although I dont have my BLE device yet to test it, so if someone else has one they can verify with I'd be greatly appreciative.
So that credit is given where it is due, here is the link to the thread with the zip I used:
http://forum.xda-developers.com/showthread.php?t=2387107
Download the 4.3_BLE-tuna2.zip file
I then used this app to test it, the APK is in the build folder:
https://github.com/tadejkolino/BLECheck
It is telling me that BLE is now supported on my device.
Again if anyone can test this I would greatly appreciate it.
Obligatory: I'm not responsible if you screw up your device. This zip is not for the Nook HD+
Let us know if it works.
jpisini said:
Let us know if it works.
Click to expand...
Click to collapse
Unfortunately I wont have my BLE device for quite some time yet, so if someone else is able to check it, that'd be cool.
I hope this is the right section to post this. I would like to learn how to make a twrp flashable rom from the stock factory images that google releases. I would like to take the stock image, root it, disable force encryption and possibly tweak the build prop dpi settings. Can someone point me to information where I may learn how to do this. These are the only changes I want to make for now, I want to build a near stock rom with all the gapps that is still odexed with root so it may be customized as I see fit.
eman5oh said:
I hope this is the right section to post this. I would like to learn how to make a twrp flashable rom from the stock factory images that google releases. I would like to take the stock image, root it, disable force encryption and possibly tweak the build prop dpi settings. Can someone point me to information where I may learn how to do this. These are the only changes I want to make for now, I want to build a near stock rom with all the gapps that is still odexed with root so it may be customized as I see fit.
Click to expand...
Click to collapse
well, when people need help, they usually post their questions into the q&a/help section, not into general, where you put your question. general n6 info goes here, not questions. but.. ill ask a mod to move your question there
eman5oh said:
I hope this is the right section to post this. I would like to learn how to make a twrp flashable rom from the stock factory images that google releases. I would like to take the stock image, root it, disable force encryption and possibly tweak the build prop dpi settings. Can someone point me to information where I may learn how to do this. These are the only changes I want to make for now, I want to build a near stock rom with all the gapps that is still odexed with root so it may be customized as I see fit.
Click to expand...
Click to collapse
there is a very basic guide to build from factory img in the General forum.
have a look there for it, i saw it in the last few days.
edit, http://forum.xda-developers.com/nexus-6/general/guide-building-aosp-nexus-6-continued-t3122987
bweN diorD said:
there is a very basic guide to build from factory img in the General forum.
have a look there for it, i saw it in the last few days.
edit, http://forum.xda-developers.com/nexus-6/general/guide-building-aosp-nexus-6-continued-t3122987
Click to expand...
Click to collapse
Thanks for the info, but I am not looking to build from the AOSP source, I am looking to use the stock base with all the google stuff including the non open stuff as well. A simple first task may be to take the stock factory image and make it flashable as is. I assume (maybe wrongly) that once I can do this it will not be too hard to add the su binary to flash and a no force decrypt boot img as well.
eman5oh said:
Thanks for the info, but I am not looking to build from the AOSP source, I am looking to use the stock base with all the google stuff including the non open stuff as well. A simple first task may be to take the stock factory image and make it flashable as is. I assume (maybe wrongly) that once I can do this it will not be too hard to add the su binary to flash and a no force decrypt boot img as well.
Click to expand...
Click to collapse
i would think you could pull the stock you want to local, make your mods, then build it, but im not really the one to give advice in depth on this subject. sorry.