Related
i just flash my firmware to CM mod 6.1.2, but am having trouble setting up my gmail account!
after i enter my email and password, it brings me to another screen 'server settings' i press next and it keep popping up 'unable to open connection to server'
pls help!!!
as all my contacts are in there!!! and i flash it without doing backup...
Your phone is probably offline.
Did you apply the appropriate baseband file in open recovery?
do a complete wipe of your device from recovery menu, then install the CM again, report back.
Ummm... he would still have the same problem... he would will have to apply the right baseband...
zeppelinrox said:
Ummm... he would still have the same problem... he would will have to apply the right baseband...
Click to expand...
Click to collapse
Yes, sry I didn't see your reply while I was replying.
You're probably right.
I think I've seen the questions for "server settings" when I was mistakenly trying to set an account for a Exchange server instead of Google account.
I think when trying to set an Google account it shouldn'tt ask the server configuration questions, should it?
Not that I recall, but it might happen if there's no connection
Sent from my Milestone using Tapatalk
zeppelinrox said:
Not that I recall, but it might happen if there's no connection
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
I also never server a Gmail setting screen...
But in any case; the OP should check:
1. Baseband files
2. APNs
3. If this does not work, or he cant figure out...wifi would be a good test.
But honestly, something seems strange. Another question would be what kind of wipes were done for the flash to CM?
Dalvik wipe and /cache are necessary before flashing. Somebody mentioned full wipe. I am inclined to agree if the OP was not already on a CM base rom.
Sent from my Milestone using Tapatalk
ok i dont know if i found the correct solution.
but after i installed google apps (market, map etc) then it can connect to the server without bringing me to the 'server settings' screen already
Hey, i'm having an issue with cyanogenmod 7 on my Nook Color. Switched from cupcake because I thought I'd have greater compatibility with apps. Since the change, programs that once worked (e.g. snesoid, beautifu widgets) won't book. Just get hung and ask me if I want to force close. I'm using the tablet tweaks and everything... is this just how it is, or did I mess up somewhere along the line? Thanks.
I can't speak for the specific apps or ROM ur using, but yeah this happens with the occasional app. Remember that u r using an unfinished product. It will get better as CM refines it. Android as a whole is a buggy system. Its never going to be as functional as something like iOS.
Did you wipe either Cache and/or Data partitions before flashing CM7? Wiping the Data partition will wipe all installed applications and settings, however, it will prevent any weird issues arising from incompatible settings across different ROMs and OS versions.
I don't know about snesoid, but my personal experience is that BW works very well in CM7.
sgt.pepper99 said:
Hey, i'm having an issue with cyanogenmod 7 on my Nook Color. Switched from cupcake because I thought I'd have greater compatibility with apps. Since the change, programs that once worked (e.g. snesoid, beautifu widgets) won't book. Just get hung and ask me if I want to force close. I'm using the tablet tweaks and everything... is this just how it is, or did I mess up somewhere along the line? Thanks.
Click to expand...
Click to collapse
Sounds like something's wrong. My Beautiful Widgets works great. I'd try reinstalling using these instructions:
I have similar problems with both Beautiful Widgets and the XDA app. When I log into the XDA app, it gives me a force close pop up. However, when I use the XDA app without logging in, I don't have any problems.
Which instructions are you referring to in that MASSIVE 100+ page post?
Thanks.
joelszs said:
I have similar problems with both Beautiful Widgets and the XDA app. When I log into the XDA app, it gives me a force close pop up. However, when I use the XDA app without logging in, I don't have any problems.
Which instructions are you referring to in that MASSIVE 100+ page post?
Thanks.
Click to expand...
Click to collapse
The first post on that page.. That's how I flashed CM7 (pretty standard method, really) and I have no problems with Beautiful Widgets. Haven't tested XDA app. To be honest, I have problems with XDA app on my Droid 1, CM7, so I never use it.
Thanks everyone! I installed following the instructions from wiki.cyanogenmod http://wiki.cyanogenmod.com/index.php?title=Barnes_&_Noble_Nook_Color:_Full_Update_Guide
I will give it another shot and report back when I do. Right now I've gone back to cupcake, but still having a problem with beautiful widgets- gets stuck on the "loading skins" screen, never loads.
p.s. I *did* wipe the cache and data partitions
"Cupcake"?? I think you mean "Eclair"?
Cupcake was many versions ago, before the Nook existed, and the Nook Color ships with Eclair...
So, I switched to cyanogen, but I couldn't get beautiful widgets or snesoid to run. Trying to revert to factory settings, but every time I try I get stuck on the word ANDROID in blue.
I've tried hard booting 8x, I've tried running the script to change the bootcount but this just gets me to clockworkmod. I try running the factory reset/data wipe option, but it clearly doesn't remove cyanogen. I've also tried sideloading a 1.1 version zip, all to no avail. Any suggestions? Would uninstalling clockworkmod help?
Are you sure you followed the 8-failed-boots method precisely? That really should have brought you back to stock, at least as far as I understand.
http://nookdevs.com/Flash_back_to_clean_stock_ROM
I really do think so. It brought me to clockwork recovery instead of the usual factory reset...
Well I'm out of my league (I haven't done this) but it seems there are still ways... You could check out http://www.androidtablets.net/forum...install-cwr-save-root-revert-stock-image.html or do some searches here.
Now I'm stuck on the N sign instead of android... Tried everything in the link here http://forum.xda-developers.com/showthread.php?t=914690 including the boot partition. No dice. The only way i can get it to boot is to reinstall cyanogen. Is there some trick to uninstalling cyanogen? Any other suggestions out there?
It seems like cyanogen just WON'T WIPE. Even when I format my data, it still loads, despite clockworkmod reporting that it has been formatted. Ideas please!
Check at androidtablets dot net
look for the link about restoring and removing clockwork from an SD card. I'd post the link but I can't yet.
MajTom said:
Check at androidtablets dot net
look for the link about restoring and removing clockwork from an SD card. I'd post the link but I can't yet.
Click to expand...
Click to collapse
http://www.androidtablets.net/forum...install-cwr-save-root-revert-stock-image.html This one? tried it, no luck
Bummer. Yeah, that's the link. You might want to look in Nookdev too. They oulined a process that was similar, but they said you have to do the image restore AND unregister... though it's been a while since I've looked at it. It might be more helpful. Good luck in getting it back to stock.
This is unfortunate. I had been under the impression it was a LOT easier to get back to stock. (I still bet someone who knows will give you the right guidance.)
Oh well, I guess it's a good argument for using SD card booting exclusively -- I can't wait for a final CM7 SD Card ISO.
Hey,
this problem started only today and has never happened before. The only things changing were some app updates and a few new installs. I already uninstalled all of the apps installed in the last few days in hopes of reverting the situation but it didn't help. And after I made the first reboot when the apps began to force close randomly it looked like a semi factory reset was made. All my contacts are gone, there are no SMS/call logs, but all SMSes, pictures and videos are still there. If I try to open the Market app it asks me if I accept TOS, Gmail is not set, mobile internet is not working (due to reset settings), Wi-Fi and bluetooth settings are still there. In short, everything is half-fuc*ed.
What do you thing happened? And is there any possibility I can go back to a normal state without starting from fresh?
Pegart said:
Hey,
this problem started only today and has never happened before. The only things changing were some app updates and a few new installs. I already uninstalled all of the apps installed in the last few days in hopes of reverting the situation but it didn't help. And after I made the first reboot when the apps began to force close randomly it looked like a semi factory reset was made. All my contacts are gone, there are no SMS/call logs, but all SMSes, pictures and videos are still there. If I try to open the Market app it asks me if I accept TOS, Gmail is not set, mobile internet is not working (due to reset settings), Wi-Fi and bluetooth settings are still there. In short, everything is half-fuc*ed.
What do you thing happened? And is there any possibility I can go back to a normal state without starting from fresh?
Click to expand...
Click to collapse
Go into Recovery and Fix Permissions, then reboot and see if that has fixed the problem.
Flash a new stock rom to solve this issue..
Sent from my GT-I9000 using XDA Premium App
doomsdaycs said:
Flash a new stock rom to solve this issue..
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
But try a wipe (factory reset) before, should solve thus issue.
Sent from my GT-I9000 using XDA Premium App
Oh yeah, and another thing. Market, Youtube and Maps apps where all a few version lower than before and started updating immediately after opening the Market app. Market still is (even the old design and everything). How can this be?
rschenck said:
Go into Recovery and Fix Permissions, then reboot and see if that has fixed the problem.
Click to expand...
Click to collapse
I don't have a Fix Permissions option in recovery (3e)???
doomsdaycs said:
Flash a new stock rom to solve this issue..
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I'm trying to avoid that at the moment. Just for the time being so I can make a complete backup of all my stuff.
Lunchbox115 said:
But try a wipe (factory reset) before, should solve thus issue.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Same as above. For now.
i9000 random loss of data
Yes, this is a rather old thread I'm trying to revive here, but as it is adviced to continue those instread of duplicating them, here are my issues:
I gave my i9000 to a relative ~a year ago and recently it started acting strange. About 1-2 times a month I get a call from that relative saying: "I get a lot of force closes, phone is unusable, nothing works". I then walk over, take a look and yes, unusable. It appears that all information in the /system partition gets lost for no reason. The relative told me that this usually happens when some google apps are updating, but it might still be random.
Currently MackayRom (latest) is installed.
Usually when I got the call, I hopped over to my relative, did a factory reset (wipe of /system and /data + Cache and Dalvik Cache) then reflashed the ROM and Gapps and everything looked good again. Sadly the issue continues to return.
What I tried so far is a complete wipe of anything, reverting to a stock TW Rom, and going back to an AOSP Rom from there (first CM 11, then Mackay). The issue appeard to be gone afterwards, I didn't hear from that relative for an unusual amount of time, but after a month or 1 1/2, it returned.
My guess is, that one of the chips that are containing the /system partition is broken or at least close to die (I'm not sure if it is just one or multiple chips, since the CM Team or Pawit himself changed something in the partition structure somewhere between cm10, cm10.1 and cm11 to ensure the compatibility of that old device with KitKat). Anyways, I'd love to hear any ideas or suggestions on how to solve this issue (although I reached a point where I think that solving this isn't possible anymore, unless I wanna swap the Mainboard, which would mean paying an amount of money that I could get a new phone for as well.) Soon as I have the time, I'll Odin-flash the latest TW Rom to the device and have my relative use that for a while, just to see if the different/older partition structure helps in any way.
Thanks in advance for any replies .
OK so I just recently wiped and reflashed this rom again and all went well. I've reinstalled a bunch of my apps and all of a sudden I'm getting reboots! Load into os and right away it seems very bogged down....none of my widgets are loading and about 1-2 mins later, I reboot... frustrating.
If its an app is there a way to tell which one and remove it? Or has something pooched the os already? Frustrating this has happened already after a fresh wipe n flash and I couldn't even do a Android backup as it too was having problems (posted that elsewhere).
Aside from this specific prob is there an app or way to find out what program or service is causing a crash or failure to help solve similar issues?
Sent from my SGH-I897 running SGSICS 4.0.3 rc4.2&Glitch kernel v14 b5
Until you get os running better the 2nd link won't help...
http://wiki.cyanogenmod.com/index.php?title=Logcat
http://www.appbrain.com/app/catlog-logcat-reader/com.nolanlawson.logcat
pc103 said:
Until you get os running better the 2nd link won't help...
http://wiki.cyanogenmod.com/index.php?title=Logcat
http://www.appbrain.com/app/catlog-logcat-reader/com.nolanlawson.logcat
Click to expand...
Click to collapse
Logcat is good, but just remember, you will need to set a relatively low rate for number of lines to write to SD to have a chance of catching the crash in the act
Because I'm not allowed to post to the appropriate thread in the developer forum, here my experiences with the latest CM-10.2 from August, 27th 2013 by C-o-M:
Upgraded device GT-P3700 from Android 3.1 Honeycomb (maybe some new user finds these instructions useful):
1) Rooted device by applying root-original.zip using stock recovery.
2) Applied latest code.google.com/p/tab89cm/downloads/detail?name=Clockwork_Recovery_6.0.2.7_GT-P7300.zip&can=2&q=" using stock recovery.
3) Wiped cache, data partition, cleared, dalvik cache, ran factory reset using CWM.
4) Applied CM-10.2 and appropriate gapps-jb-mr2-noneon-20130824-signed.zip using CWM.
First, I noticed a minor thing: The cyanogenmod boot animation is a bit strange though; it seems broken the first few moments, that is there seems to be a wrong display mode set that distorts the image, or maybe the orientation is wrong. Whatever, it does no harm to general functionality and the screen restores itself shortly before the home screen is being loaded, and shows the correct logo animation.
So far, everything works fine except GPS (apart from HDMI out which I can't even test). I can use fdroid now which crashed on stock. And everything is very smooth and snappy now. I've tested WLAN and bluetooth, no 3g so far (but other user reports claim it works fine).
It would be nice if the GPS could be made to work. I'd like to use the tablet as an offline navigation system sometimes. GPS is reported to be enabled, but no satellites are found.
Otherwise great job, thanks a lot!
@Moderators: If it is no issue, please grant me rights to post to the appropriate dev thread directly. It is a bit impractical to post this out of place.
dark$hadow said:
Because I'm not allowed to post to the appropriate thread in the developer forum, here my experiences with the latest CM-10.2 from August, 27th 2013 by C-o-M:
Upgraded device GT-P3700 from Android 3.1 Honeycomb (maybe some new user finds these instructions useful):
1) Rooted device by applying root-original.zip using stock recovery.
2) Applied latest code.google.com/p/tab89cm/downloads/detail?name=Clockwork_Recovery_6.0.2.7_GT-P7300.zip&can=2&q=" using stock recovery.
3) Wiped cache, data partition, cleared, dalvik cache, ran factory reset using CWM.
4) Applied CM-10.2 and appropriate gapps-jb-mr2-noneon-20130824-signed.zip using CWM.
First, I noticed a minor thing: The cyanogenmod boot animation is a bit strange though; it seems broken the first few moments, that is there seems to be a wrong display mode set that distorts the image, or maybe the orientation is wrong. Whatever, it does no harm to general functionality and the screen restores itself shortly before the home screen is being loaded, and shows the correct logo animation.
So far, everything works fine except GPS (apart from HDMI out which I can't even test). I can use fdroid now which crashed on stock. And everything is very smooth and snappy now. I've tested WLAN and bluetooth, no 3g so far (but other user reports claim it works fine).
It would be nice if the GPS could be made to work. I'd like to use the tablet as an offline navigation system sometimes. GPS is reported to be enabled, but no satellites are found.
Otherwise great job, thanks a lot!
@Moderators: If it is no issue, please grant me rights to post to the appropriate dev thread directly. It is a bit impractical to post this out of place.
Click to expand...
Click to collapse
thanks for your expierens. I am use CM 10.2 from first reply and before also CM 10.1 by different versions , i think the Boot animation is not a bug.
I think also it is better that .we were are user have the Chance to post our expirence at the thread,but these are the rules.
For me is this version very good and i am used my tab daily. My onlyest bug are the battery drain. So i searcht settings .were i can reduced this.
Sent from my GT-P7310 using xda app-developers app
What the prob with the GPS?
Im still thinking to flash this rom....but worried about the bugs...
Coz i had softbricked my tab few time b4... huhu...
slaughterer0206 said:
What the prob with the GPS?
Im still thinking to flash this rom....but worried about the bugs...
Coz i had softbricked my tab few time b4... huhu...
Click to expand...
Click to collapse
I don't think there's any risk of bricking while flashing this rom. Just make a nandroid if you are worried, and restore it if the bugs aren't worth it. If you are going back to ics, you will have to move all the files from /sdcard/0 to /sdcard, but that's easy enough. Going back to any 4.2.x rom is no hassle at all.
Other than HDMI, is there any other issues with this rom?
Saw some people have problem with APN...with on/off the aeroplane mode will solve it i think..
Coz i had this issue b4...
No calls
Everything seems fine except I can't make or receive calls (GT-P7300)
As soon as I can press Call it hangs up. Can't receive calls either.
Data over 3G is fine, and I can send/receive SMS messages no problem.
Grabbing output from logcat, everything seems fine except for this:
Code:
E/BluetoothPhoneService( 974): Could not get a handle on Connection object for the call
Which is the only error I see. I'm not trying to use Bluetooth (it's turned off).
Anyone else with this issue?
Just flash cm10.2 by com...
So far, all good... 3g APN already set after boot...
GPS on google map, waze & sygic so far is ok.. Didnt try navigating yet
Issue I found so far
-cannot reboot...it just switch off the tab & need to on manually
-when open setting>interface>quick setting panel>tyle & layout..
then press "back", its FC & written "unfortunately, setting has stopped"
-call in & out is not functioning.. does we need to do someting to make it work? (Like installing modem on ics rom before)
lost root after installed.
Sent from my GT-P7310 using XDA Premium 4 mobile app
asiansdude said:
lost root after installed.
Sent from my GT-P7310 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Go to setting > about tablet...then tap build number 7/8 times.. then enable root at developers
GPS prob are fixed,show the thread by COM 10.2 ( 4.3 ) post 133 by DemonGloom,Post #133
Be fore i ve copyed the file i show only 2 Satellit after then 10 and more
Sent from my GT-P7310 using xda app-developers app
bierma32 said:
GPS prob are fixed,show the thread by COM 10.2 ( 4.3 ) post 133 by DemonGloom,Post #133
Be fore i ve copyed the file i show only 2 Satellit after then 10 and more
Sent from my GT-P7310 using xda app-developers app
Click to expand...
Click to collapse
Yeah... now when i open Sygic, it directly detect the satellite... :good:
New Version are avaible , See the threat from Com 10.2 ( 4.3 ) post #1 are updatet, but its complet untest
I hope set are the knowend bugs are fixed
Sent from my GT-P7310 using xda app-developers app
Saw some comment about touchscreen delay...but im not sure what thats issue is all about...
Today I am flashed the new version 10.2 (4.3)from Com
Before I am flashed the new version I am make a backup,to make sure to go back when something going wrong
I done no wipe or factory reset, flashed directly over the old version.
at the startup comes a new account by cynagon
I ve test wlan , GPS , google now , email and all my apps works fine.
root works also.
at the touchscreen I see now lag,
also new user works now
edit: if got the reboot issue, when I press the reboot button on the logscreen ,the tab shuts down but it didn't restart. I must make an hard reset, press and hold 15 seconds the power button before tab restart.
The thame I must do after fully charging. ( the tab was off )
Sent from my GT-P7310 using xda app-developers app
allywilson said:
Everything seems fine except I can't make or receive calls (GT-P7300)
As soon as I can press Call it hangs up. Can't receive calls either.
Data over 3G is fine, and I can send/receive SMS messages no problem.
Grabbing output from logcat, everything seems fine except for this:
Code:
E/BluetoothPhoneService( 974): Could not get a handle on Connection object for the call
Which is the only error I see. I'm not trying to use Bluetooth (it's turned off).
Anyone else with this issue?
Click to expand...
Click to collapse
I've finally figured out how to get the calls working on my GT-P7300 / P5.
I used the latest 10.2 from C-o-M, called cm-10.2-20130912-UNOFFICIAL-P5.zip, installed it under CWM 5.5, rebooted (no flushing of cache). Let it upgrade the apps (let it take me through the latest register for Cyanogenmod stuff as well). SMS and data working, still no calls though.
Found this forum post.
I downloaded the file called CWM_I9103XXLQ3_Modem.zip and installed it under CWM 5.5 again. Rebooted (again no flushing of cache) - and it works!
That forum post has ZIP files named after the baseband with "ENABLE VOICE CALL" on the end as well, and although I downloaded the one specific to my modem version (P7300XXLQ6) I didn't need to install it to get the calls working.
Hope the above makes sense and helps other people!
Ally
Wanna ask... im having video & music stopping everytime notification message....
So far it happen on youtube, viki & apollo...
Did anyone having similar prob?
Wi-fi band function?
Does anyone know if 5ghz wifi is broken on C-O-M's 10.2-20130912 build? If it isn't, what channels are people using?
Fix make/receive call in p7300
allywilson said:
I've finally figured out how to get the calls working on my GT-P7300 / P5.
I used the latest 10.2 from C-o-M, called cm-10.2-20130912-UNOFFICIAL-P5.zip, installed it under CWM 5.5, rebooted (no flushing of cache). Let it upgrade the apps (let it take me through the latest register for Cyanogenmod stuff as well). SMS and data working, still no calls though.
Found this forum post.
I downloaded the file called CWM_I9103XXLQ3_Modem.zip and installed it under CWM 5.5 again. Rebooted (again no flushing of cache) - and it works!
That forum post has ZIP files named after the baseband with "ENABLE VOICE CALL" on the end as well, and although I downloaded the one specific to my modem version (P7300XXLQ6) I didn't need to install it to get the calls working.
Hope the above makes sense and helps other people!
Ally
Click to expand...
Click to collapse
Thank you! I've just flash CM 10.2 and i found out that is the smoothest rom i've ever flash (Rom stock, 4.4.2 Nameless, Omni) . I also have an issue in making and receiving phone call . I'll try fix it
This flash gave a new life to 8.9 tab
Everything works OK...
haven't tried gsm calls but i do not need this feature.
Anybody with "Screen is on while Sleep" problem try "com.afilon.sleepbutton" app from Play-store to put your tab to sleep