Hi guys,
I've had my Droid 3 since October and I've tried all sorts of SteelDroid, CM9, AOKP ROMS since day one.
With all the ROMS, including VZW stock the dB info shown in *#*#INFO#*#* is 0dB.
My provider is Movistar Argentina and I have HSDPA service. The radio works ok, not awesome, but ok. I have to reboot the phone sometimes and I lose calls and SMS, but not very frequently.
I have tried reflashing the radio with Chinese XT883 but it also shows 0dB all the time.
What do I have to change in build.prop to get the proper signal level displayed?
Thanks in advance,
Axel
What about settings > about phone > status?
DoubleYouPee said:
What about settings > about phone > status?
Click to expand...
Click to collapse
Signal strength 0dBm 97 asu
Mobile network type
UMTS:3
I have noticed the same issue on AOKP since build 4.0.4 (I think that was almost a month ago)
I have the same thing. I'm using T-Mobile and will see if I can figure it out.
Flashed to 5.7.906 and now dBm is not stuck at zero anymore.
BTW Maverick 4.0 is pretty nice. I don't miss ICS and the camera is fully supported
Sent from my DROID3 using XDA
rojocapo said:
Flashed to 5.7.906 and now dBm is not stuck at zero anymore.
BTW Maverick 4.0 is pretty nice. I don't miss ICS and the camera is fully supported
Sent from my DROID3 using XDA
Click to expand...
Click to collapse
Would flashing .906 make it work on ICS 4.0.4?
MrObvious said:
Would flashing .906 make it work on ICS 4.0.4?
Click to expand...
Click to collapse
My D3 has GB 5.7.906 with MavROM as non-safe system and AOKP nightly 25/April on the safe system. The dBm indicator works fine in GB but in ICS it's stuck at zero. Probably something to do with build.prop since I've been editting it manually.
No it actually has to do with the new 4.0.4 code and Hash hasn't been able to fix it since he has CDMA service. I suggested he get a T-Mobile SIM to see. The data is there though. I downloaded a signal widget for now.
Sent from my XT862 using XDA
MrObvious said:
Would flashing .906 make it work on ICS 4.0.4?
Click to expand...
Click to collapse
Method #1
For those under .906 version:
You will need to be "Root"
1. Using Root Explorer (or other similar ap), go to "/system" folder
2. FInd build.prop
3. Backup it up (copy as build.prop.bak)
4. Make mount.R/W (in the left rigt corner of Root Explorer) to R/O
5. Open build.prop with text editor (long tap on build.prop and choose text editing)
6. Add to the end of file next code:
# THE CODE for better gprs, 3g reception
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=9
7. Save and exit from build.prop
8. Reboot
P.S. You might feel the difference only after 2 or more restarts
Caution! Causes the battery to last less and you do this on your own risk.
So doing that will fix it?
Sent from my XT862 using XDA
Related
Holiday_SKT_KR_1.59.911.7 BASE
For Rooted user
0.3
you need to be flash this kernel
Added Amaze camera from hTC Amaze4G camera
Updated Some hTC Amaze4G driver
Revert screenstate scaling (delete Dual-core CPU script (by remcoros))
Extended SystemUI
Fixed Crt OFF
Updated Busybox & SU
Updated Media profile
galaxys2 Default font
more some tweak(media, camera, about DB) & some arrangement .. and i'm forgot
0.2
you need to be flash this kernel
crt off animation
extended Beats audio
extended audio volume
Beats wallpaper
Beats boot animation
Dual-core CPU script (by remcoros)
Loopy Smoothness Tweak
ultrasmooth Rosie
Optimized
intellidemand governor
fixed gralloc.msm8660 log issue
Added to locale
1.Backup, Backup, Backup, Backup,
2.Wipe data/factory reset - Wipe cache partition - Wipe Dalvik cache
and then Choose 'install zip from sdcard'
=======================================================================
-Holicakes kernel
-Deodexed
-Beats Audio sound
-Optimized apk & framework
-Advance powermenu
-Read init.d/script
-ICS animation
-accelerated gallery
-Added screenstate scaling(Proper dual core switching by eViL Dee)
-calibrate battery (by seo)
-Sony Bravia Engine
-zipalign
-Tweak build.prop
-english & korean locale
and more..
Features:
Android 2.3.4
HTC Sense 3.0
Build 1.59.911.7
Kernel version info
2.6.35.13-holicakes
[email protected] #5
SMP PREEMPT Thu Nov 26 10:59:38 ART 2011
If you do not have wifi connection.. Try these tips..
The command to flash a boot.img with fastboot is:
fastboot flash boot boot.img
Donation
If You Like My Work Then vote Thread or Some reply or Checking Thanks
and Don't forget This(Dok-Do is a territory of Korea. Dok-do is Korean land.)
Thanks to many people, many other developer,
http://cafe.naver.com/htc.cafe, korean user, xda-developers
Distribution without my permission is allowed but make sure to specify the origin and it's site links.
Download...
NEW
0.3_holicakes_Beats_en.zip
OLD
0.2_holicakes_Beats_en.zip
I'm not so good at English. sorry
--------------------------------------------------------------------------------by 베르나르도게으른
Has the kernel been fixed yet? I have tried it along with others on the HTC raider Canadian version. We got the wifi working as you mentioned but it's still not overclocking the cpu.
Going to try this rom out! I'm so excited!
If you have a hard time uploading, I can help provide a mirror
mattymon said:
Has the kernel been fixed yet? I have tried it along with others on the HTC raider Canadian version. We got the wifi working as you mentioned but it's still not overclocking the cpu.
Click to expand...
Click to collapse
I don't try to test, cause I don't use Canadian locale..
Testing this rom right now... Booted up okay (takes a while to start, perfectly normal). Auto reboots from recovery right after the update which is pretty convenient
The Default T9 keyboard is really hard to deal with, easy to switch.(press the gear lol).
There is no default file manager. You should definitely put one for easy access.
Battery indicator has a small font percentage. Lovely.
Small thing I noticed while installing apps are the permissions that each app requests. Sometimes they get a little glitchy or messed up. Or they say connection problem or invalid feature code.
Sadly, the kernel still doesn't push the clock past 1182 GHz ):
Typical Available RAM at boot is around 490 MB to 520 MB...Everything is working perfectly smooth, even the Wifi was working fine with not extra steps.
I also missed the part about Data not working for Rogers customers :/ Tried using the Rogers APN.. doesn't work.
This may be a very noob question, but did it change your boot animation?
I'm in South Korea, and the Raider ships with a very obnoxious SKT sound that plays EXTREMELY loud by default.
I would like to do away with that.
Just flashed ROM, unfortunately CPU is still at 1.2ghz. At this point all rooted devices are from either Rogers or Bell in Canada and I highly doubt if anyone can get the cpu back to 1.5ghz. However I do appreciate your work.
DustinEwan said:
This may be a very noob question, but did it change your boot animation?
I'm in South Korea, and the Raider ships with a very obnoxious SKT sound that plays EXTREMELY loud by default.
I would like to do away with that.
Click to expand...
Click to collapse
Yes it changes your boot animation.. to something else.. a bit T.. 4GLTE display.. still has sound though...
I'm reverting back to my old rom strictly because I cant get my 4G APN for Canada working.. maybe i'm retarded or something lol.
**EDIT**
Yep I'm very retarded. Here's the 4GLTE APN settings for Rogers customers in Canada :/ I just friggin restored and found it.
Name: Rogers Internet
APN: ltemobile.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MMS Protocol: WAP 2.0
MMC: 302
MNC: 720
APN Type: * (Just an asterisk)
Now my idiot self will reinstall back this smexy rom
In regards to the issue of this rom: the advanced power menu. I don't actually see the problem. It works perfectly fine on my end.
Small setback. I get Data to work, but I can only mac out 3G. Cannot hit 4G.
Actually, I had this problem here in Korea. My gf has a Raider, too, but didn't experience the problem.
If you go to Dialer and type in *#*#4636#*#* it should bring up a hidden menu.
Then hit Phone Information and scroll to the bottom. If you have the same issue I have, then "Set preferred network type" will be set to WCDMA Preferred.
Change that option to GSM/WCDMA/LTE Auto and it should automatically choose 4G if it's available, then 3G, then finally 2G if it must.
Hopefully this fixes your 4G woes!
Fixed test 1.5ghz Kernel for other locale
If you do not have this info.
Kernel version info
2.6.35.13-holicakes
[email protected] #7
The command to flash a boot.img with fastboot is:
fastboot flash boot boot.img
Ill test out the kernel again right now.
Edit:
Just tested it out flashboot8. Still not overlocking to 1.5 ghz.
DustinEwan said:
Actually, I had this problem here in Korea. My gf has a Raider, too, but didn't experience the problem.
If you go to Dialer and type in *#*#4636#*#* it should bring up a hidden menu.
Then hit Phone Information and scroll to the bottom. If you have the same issue I have, then "Set preferred network type" will be set to WCDMA Preferred.
Change that option to GSM/WCDMA/LTE Auto and it should automatically choose 4G if it's available, then 3G, then finally 2G if it must.
Hopefully this fixes your 4G woes!
Click to expand...
Click to collapse
Thanks ! That did the trick!
Trying the new flashboot8 zip now...
annnd, nope. Still only limits for 1188 GHz ):
wifi erro, i wan download file boot.img
diemhenmobile said:
wifi erro, i wan download file boot.img
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19627063&postcount=1
is it possible to use the fastboot file found here: http://forum.xda-developers.com/showpost.php?p=19627063&postcount=1
for this method?
i want to test out the OC to 1832 and see how it runs.
dirt_squirrel said:
is it possible to use the fastboot file found here: http://forum.xda-developers.com/showpost.php?p=19627063&postcount=1
for this method?
i want to test out the OC to 1832 and see how it runs.
Click to expand...
Click to collapse
Go for it. That's its intended use.
Tested. Gps not work
Sent from my HTC Raider X710e using xda premium
i uploaded so you can test it
Just flashed the new 0.2. No problems so far. Although the kernel is build 1207 in this thread and the official thread for the kernel is maxed at 1206. What's new with it.
updated rom
updated rom
Code:
0.3
Added Amaze camera from hTC Amaze4G camera(http://www.youtube.com/watch?v=EeXhitaa9uM&feature=related)
Updated Some hTC Amaze4G driver
Revert screenstate scaling (delete Dual-core CPU script (by remcoros))
Extended SystemUI
Fixed Crt OFF
Updated Busybox & SU
Updated Media profile
galaxys2 Default font
more some tweak(media, camera, about DB) & some arrangement .. and i'm forgot
Click Thanks if you're a noob and benefited from this!! This guide is intended for Safestrap only.
WIFI Fix for all RAZRHD roms:
Flash after installing any rom: http://forum.xda-developers.com/attachment.php?attachmentid=1780872&d=1362475787
Epinter CM10 Boot Fix - this is the most updated CM10 you can get! Works on JB and ICS.
1. Flash after installing ROM (link below) to fix the Encryption Unsuccessful error. This was a hard one to figure out!!
2. You must also install the WIFI fix.
Manually setting Network to GSM/3G/LTE/ETC
Dial *#*#4636#*#* -> Phone Info -> Preferred Network
LTE for AT&T Users
1. Edit /system/build.prop so the default network = 9
2. Factory Reset to fix any errors/FCs.
3. Create a new APN for LTE
Data Signal Icon Fix
Add to build.prop: ro.telephony.ril.v3=signalstrength
Where to find RAZRHD ROMs
http://www.linuxmobile.org/razrhd/cm10 (Epinter CM10)
http://goo.im/devs/hashcode/vanquish
XDA, DroidRzr, RootzWiki
Re: [ZIP Flash][FIX] Working WIFI on ANY RAZRHD ROM
This should include the 4G LTE fix somewhere on here
Sent from my MB886 using xda app-developers app
Re: [ZIP Flash][FIX] Working WIFI on ANY RAZRHD ROM
Maybe a camera fix? Lol.
sent from my JokerMATRIX HD MAXX
EcHoFiiVe said:
This should include the 4G LTE fix somewhere on here
Click to expand...
Click to collapse
That's not possible with a single ZIP flash. Each ROM has its own unique build.prop, so you'd need a different ZIP fix for each ROM.
Camera works on all non-CM10 ROMs.
I was thinking about doing flashable zips to fix WiFi and LTE for each of the XT926 roms but I'm pretty sure that AT&T/Straightalk users still aren't getting proper data with the tweaks I've already done. I don't have an Atrix HD to test any maybe fixes that of thought of, so it'll be awhile before that happens.
Updated so that we can finally enjoy an updated CM10 from Epinter without the Encryption Unsuccessful error. Hopefully others can learn from this to use on their ports. The /bin files are necessary due to the init modifications required by safestrap.
Also included some information to help newbs learn to fish. Now if only they could search
Thanks you very much. Super helpful thread, I hated that encryption error lol. Everything seems to be working perfectly now besides the camera obviously.
Re: [ZIP][FIXES] RAZRHD ROMs + Working WIFI + Updated CM10 + Encryption Error Fix
dj11596 said:
Thanks you very much. Super helpful thread, I hated that encryption error lol. Everything seems to be working perfectly now besides the camera obviously.
Click to expand...
Click to collapse
GPS does not seem to work also.
Sent from my XT925 using Tapatalk
Standard Disclaimer
Code:
/* I'm Not responsible for anything that happens to your device. */
[
I will start adding features people ask for after the ROM is STABLE. I don't want a lot of touchwiz crap messing this up,
But, I will try to bring over SBeam and Airview . The reason I chose those is stock android accepts these features and I don't see
them as "touchwiz" property.
Feel Free to use this as a base ROM , just please give credits .
CHANGE LOG NEAR BOTTOM. AS ALWAYS HAVE FUN AND CONTRIBUTE . If updating you may have to wipe cache and dalvik.
BEST RESULTS SEEMS TO BE FROM TOUCHWIZ. Not necessary but just throwing it out there.
PLEASE PROVIDE LOGCATS FOR ANY ISSUE THIS WILL HELP OUT A LOT
Working
+ Data 3G
+ Wifi
+ Phone
+ Camera
+ Video Recording
+ Sms
+ MMS
+ LTE & LTE Signal Bars
NOT WORKING
WALLET
To come if I have time.
Samsung Camera ( Not included in new build will be back in next one )
All pictures to SDCARD even google synced
SBeam
AirView
Maybe More
Stable v1-8-10-13
Fixed wallet
Beta-v1.1 8-10-13
Wallet Fixed ( Thanks Dubbsy )
More a lot more Under the hood fixes and edits
THIS IS BETA STILL
Change Log 8-9-13
Completely reworked framework*jars
About phone shows LTE while on CDMA/LTE mode.
Gets all phone info correctly now.
No longer uses DS Network
Change Log 8-2-13
Added Samsung Camera to this build
Data related fixes .
Framework edits
Note the issues please
Issues:
Some features don't completely work yet. ( Best Shot )
However I will be fixing this asap.
Change Log 7-18-13
Fixed LTE
Fixed LTE Signal Bars with color.
Fixed Data switching
Fixed Network Now uses eHrpd ( Sprint )
Removed CSC
Added missing libs
Fixed Framework1&2.jar
Probably more just can't remember right know.
Change Log 7-16-13
Fixed Phone
more attempts to fix LTE
Change Log 7-14-13
NOTE YOU'LL SEE 1x FOR A MOMENT THEN IT GOES AWAY . IF FOR SOME REASON IT DOESN'T REBOOT AND YOU'll BE GOOD
Fixed MMS
Code cleanup
More attempts to fix LTE ( Please test and provide logcats )
Network improvements
Change log ( This is a test build )
7/13/13
Updated all Modules
Updated to SPL MF9 firmware
Framework.jar and Framework2.jar edits
sc.jar
abt*.jar
added permissions for CMDA
Updated Sales Code (CSC ) To be USA / Sprint
Corrected APNS
Change the following files
Code:
# Bins
bin/mpdecision
# bluetooth firmware
vendor/firmware/bcm2079xB4_firmware.ncd
vendor/firmware/bcm2079xB4_pre_firmware.ncd
vendor/firmware/bcm4335.hcd
vendor/firmware/bcm4335_A0.hcd
vendor/firmware/bcm4335_murata.hcd
vendor/firmware/bcm4335_semco.hcd
# audio
lib/libacdbloader.so
lib/libaudcal.so
lib/libcsd-client.so
etc/firmware/wcd9310/wcd9310_anc.bin
etc/firmware/wcd9310/wcd9310_mbhc.bin
# mmparser extended
lib/libExtendedExtractor.so
lib/libmmparser.so
lib/libmmosal.so
lib/libdivxdrm.so
# GPU
lib/egl/eglsubAndroid.so
lib/egl/libEGL_adreno200.so
lib/egl/libGLESv1_CM_adreno200.so
lib/egl/libGLESv2_adreno200.so
lib/egl/libq3dtools_adreno200.so
lib/libc2d2_z180.so
lib/libc2d2_a3xx.so
lib/libgsl.so
lib/libllvm-a3xx.so
#lib/libllvm-arm.so
lib/libC2D2.so
lib/libOpenVG.so
lib/libOpenCL.so
lib/libsc-a2xx.so
lib/libsc-a3xx.so
etc/firmware/a225p5_pm4.fw
etc/firmware/a225_pfp.fw
etc/firmware/a225_pm4.fw
etc/firmware/a300_pfp.fw
etc/firmware/a300_pm4.fw
etc/firmware/leia_pfp_470.fw
etc/firmware/leia_pm4_470.fw
etc/firmware/vidc_1080p.fw
#etc/firmware/yamato_pfp.fw
#etc/firmware/yamato_pm4.fw
# radio stuff
bin/ds_fmc_appd
bin/efsks
bin/ks
bin/netmgrd
bin/sec-ril
bin/qcks
bin/qmiproxy
bin/qmuxd
bin/rild
bin/rmt_storage
lib/libatparser.so
lib/libcordon.so
lib/libdiag.so
lib/libdsutils.so
lib/libdsi_netctrl.so
lib/libfactoryutil.so
lib/libidl.so
lib/libnetmgr.so
lib/libomission_avoidance.so
lib/libqdi.so
lib/libqdp.so
lib/libqmi.so
lib/libqmiservices.so
lib/libqmi_cci.so
lib/libqmi_common_so.so
lib/libqmi_csi.so
lib/libqmi_encdec.so
lib/libqcci_legacy.so
lib/libqmi_client_qmux.so
lib/libreference-ril.so
lib/libril-qcril-hook-oem.so
lib/libsecril-client.so
lib/libtime_genoff.so
# GPS stuff
lib/libloc_api_v02.so
# sensors
lib/libsensirion_j1.so
lib/libsam.so
lib/hw/sensors.msm8960.so
lib/hw/sensorhubs.msm8960.so
# camera stuff
bin/mm-qcamera-daemon
cameradata/M10MO_SFW.bin
cameradata/RS_M10MO_OL.bin
cameradata/RS_M10MO_OS.bin
cameradata/RS_M10MO_SL.bin
cameradata/RS_M10MO_SS.bin
cameradata/datapattern_420sp.yuv
cameradata/datapattern_front_420sp.yuv
lib/hw/camera.msm8960.so
lib/libchromatix_imx074_default_video.so
lib/libchromatix_imx074_preview.so
lib/libchromatix_imx074_video_hd.so
lib/libchromatix_imx074_zsl.so
lib/libchromatix_imx091_default_video.so
lib/libchromatix_imx091_preview.so
lib/libchromatix_imx091_video_hd.so
lib/libchromatix_mt9e013_default_video.so
lib/libchromatix_mt9e013_preview.so
lib/libchromatix_mt9e013_video_hfr.so
lib/libchromatix_ov2720_default_video.so
lib/libchromatix_ov2720_hfr.so
lib/libchromatix_ov2720_preview.so
lib/libchromatix_ov2720_zsl.so
lib/libchromatix_ov5647_default_video.so
lib/libchromatix_ov5647_preview.so
lib/libchromatix_ov8825_default_video.so
lib/libchromatix_ov8825_preview.so
lib/libchromatix_ov9726_default_video.so
lib/libchromatix_ov9726_preview.so
lib/libchromatix_s5k3l1yx_default_video.so
lib/libchromatix_s5k3l1yx_hfr_120fps.so
lib/libchromatix_s5k3l1yx_hfr_60fps.so
lib/libchromatix_s5k3l1yx_hfr_90fps.so
lib/libchromatix_s5k3l1yx_preview.so
lib/libchromatix_s5k3l1yx_video_hd.so
lib/libchromatix_s5k3l1yx_zsl.so
lib/libchromatix_s5k4e1_default_video.so
lib/libchromatix_s5k4e1_preview.so
lib/libchromatix_s5k6b2yx_pip.so
lib/libchromatix_s5k6b2yx_preview.so
lib/libchromatix_s5k6b2yx_smartstay.so
lib/libchromatix_s5k6b2yx_video.so
lib/libchromatix_s5k6b2yx_vt.so
lib/libchromatix_s5k6b2yx_vt_hd.so
lib/libgemini.so
lib/libimage-jpeg-enc-omx-comp.so
lib/libimage-omx-common.so
lib/libmercury.so
lib/libmmcamera_faceproc.so
lib/libmmcamera_frameproc.so
lib/libmmcamera_hdr_lib.so
lib/libmmcamera_image_stab.so
lib/libmmcamera_imx091.so
lib/libmmcamera_interface.so
lib/libmmcamera_interface2.so
lib/libmmcamera_plugin.so
lib/libmmcamera_statsproc31.so
lib/libmmcamera_wavelet_lib.so
lib/libmmjpeg.so
lib/libmmjpeg_interface.so
lib/libmmmpod.so
lib/libmmstillomx.so
lib/liboemcamera.so
lib/libsecnativefeature.so
lib/libvdis.so
# wifi
etc/wifi/bcmdhd_apsta.bin
etc/wifi/bcmdhd_apsta.bin_a0
etc/wifi/bcmdhd_mfg.bin
etc/wifi/bcmdhd_mfg.bin_a0
etc/wifi/bcmdhd_sta.bin
etc/wifi/bcmdhd_sta.bin_a0
etc/wifi/cred.conf
etc/wifi/nvram_mfg.txt
etc/wifi/nvram_mfg.txt_a0
etc/wifi/nvram_mfg.txt:etc/wifi/nvram_mfg.txt_murata
etc/wifi/nvram_mfg.txt_murata_a0
etc/wifi/nvram_mfg.txt_muratafem1
etc/wifi/nvram_mfg.txt_muratafem2
etc/wifi/nvram_mfg.txt_semco3rd
etc/wifi/nvram_mfg.txt_semco3rd_a0
etc/wifi/nvram_mfg.txt_semcosh
etc/wifi/nvram_net.txt
etc/wifi/nvram_net.txt_a0
etc/wifi/nvram_net.txt:etc/wifi/nvram_net.txt_murata
etc/wifi/nvram_net.txt_murata_a0
etc/wifi/nvram_net.txt_muratafem1
etc/wifi/nvram_net.txt_muratafem2
etc/wifi/nvram_net.txt_semco3rd
etc/wifi/nvram_net.txt_semco3rd_a0
etc/wifi/nvram_net.txt_semcosh
etc/wifi/wpa_supplicant.conf
lib/libqc-opt.so
# drm
bin/qseecomd
lib/libdrmdecrypt.so
lib/libdrmfs.so
lib/libdrmtime.so
lib/libhdcp2.so
lib/libQSEEComAPI.so
lib/libWVStreamControlAPI_L1.so
lib/libwvm.so
added
libnetcmdiface.so
Change log
7/3/13
Updated kernel ( Thanks Ktoonz)
Think I fixed 4G ( without apn restore )
made 3G more stable ( no more having to do Airplane mode and having it say Empty in status and should have stronger 3G service)
Added Samsung Camera ( all Features )
Fixed missing libs and binaries.
Added correct apn throughout apps and apn_editing
a few attempts to correct mms ( almost there ) .
wallet is still broke ( I believe know why though ). key and permissions issue
Change log
7/1/13
Roaming indicator fixed Now recognizes Sprint as network
LTE should be working ( nope )
GPS working
MMS working ( nope )
Install Instructions :
Download Rom
Download A Kernel.
Put ROM and Kernel on SDCard
Wipe / Factory Reset
install ROM
INSTALL A DIFFERENT KERNEL TO HAVE WORKING WIFI
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Stable v1
Stable-v1
Beta-Version-1.1
Aug-10-13
BETA-Version-1
Beta-v1-8-9-13
Stable PLEASE NOTE RANDOM REBOOTS ARE KERNEL ISSUES SO PLEASE SWITCH KERNELS BEFORE POSTING ISSUE.
Stable-Jul-18-13
Google-Edition-Samsung-Camera
Kernel
agat63-thread
flux
Kernel ( This one is known to cause reboots )
ktoonsez-thread
Old Builds:
Old
July-16-13
Old
July-13-13
Old Build
JULY_3_2013
Old Build ( LTE Test build )
Second-LTE-Test-Build-7-14-13
Old Build ( Mostly Stable )
July-7-14
Trying to DL now. Waiting for access. Thanks.
Sent from my SPH-L720 using Tapatalk 4 Beta
blackhand901 said:
Trying to DL now. Waiting for access. Thanks.
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Download should be working now
Thanks. Will update.
Sent from my SPH-L720 using Tapatalk 4 Beta
B-dub25 said:
Download should be working now
Click to expand...
Click to collapse
I'll give this a shot after I finish with the version Dubbsy over in the verizon forum did for me.
to fix the roaming indicator, you need to import cm eri.xml file in the overlay.
I'm not getting any data at all. Are you on MDL? I tried to connect to Wi-Fi and disconnect and no luck.
boydefecto said:
I'm not getting any data at all. Are you on MDL? I tried to connect to Wi-Fi and disconnect and no luck.
Click to expand...
Click to collapse
Have you tried HTC Lte from the market? I used it to change it to LTE/CDMA auto prl
Sent from my SCH-I545 using xda premium
boydefecto said:
I'm not getting any data at all. Are you on MDL? I tried to connect to Wi-Fi and disconnect and no luck.
Click to expand...
Click to collapse
Yes I'm on MDL , but don't think that should matter .
Just flashed this rom from a CM nightly. I don't get any service whatsoever but everything else seems to be working fine.
lost my radio completely, came from MDL, any idea whats up?
ijrod21i said:
Just flashed this rom. I don't get any service whatsoever but everything else seems to be working fine.
Click to expand...
Click to collapse
If you go to mobile networks does it keep reverting back to wcdma preferred? Try that app I mentioned a few posts back, that's what the Verizon thread says to use and it worked for me
Sent from my SCH-I545 using xda premium
Nice
Sent from my LG-LS970 using xda app-developers app
dcaplinger76 said:
If you go to mobile networks does it keep reverting back to wcdma preferred? Try that app I mentioned a few posts back, that's what the Verizon thread says to use and it worked for me
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
When I download the LTE OnOff app and go to "Set preferred network type:" no matter which option I select, the box just says "Unknown" when I select it.
ijrod21i said:
When I download the LTE OnOff app and go to "Set preferred network type:" no matter which option I select, the box just says "Unknown" when I select it.
Click to expand...
Click to collapse
same
williamvito said:
lost my radio completely, came from MDL, any idea whats up?
Click to expand...
Click to collapse
Settings > data > Network mode . Select CDMA/lte. CDMA subscriptions auto
B-dub25 said:
Settings > data > Network mode . Select CDMA/lte. CDMA subscriptions auto
Click to expand...
Click to collapse
I had those settings but baseband said unknown
Sent from my SPH-L720 using Tapatalk 4 Beta
B-dub25 said:
Settings > data > Network mode . Select CDMA/lte. CDMA subscriptions auto
Click to expand...
Click to collapse
already on lte/cdma cdma subscription options are only 2 ruim/sim and nv
jsmcmahon89 said:
I had those settings but baseband said unknown
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Same here... The OP shows a picture with MDL baseband how was that achieved?
ijrod21i said:
When I download the LTE OnOff app and go to "Set preferred network type:" no matter which option I select, the box just says "Unknown" when I select it.
Click to expand...
Click to collapse
Maybe it work for me because I flashed a different kernel.
Sent from my SCH-I545 using xda premium
Rom is pure AOSP with a mod to see if LTE settings work you can *#*#4636#*#* and change the settings there and they sick after reboot . But i have no 4G sim to use to see if the mod works or is it just a dead end . If someone could test it please and let me know yes or no . And i have used hellscore latest kernel for this rom
Download link here kk-4G-test-aosp.zip - 167.93 MB
p2pjack said:
Can some with a 4G signal test this zip for has i have no 4G connection . Just want to know if the changes i have done work or not
Download link here kk-4G-test-aosp.zip - 167.93 MB
Click to expand...
Click to collapse
Hey bud. You might want to go into further detail. Like what exactly is that zip? What exactly are you looking to test?
Without a description...nobody will touch it:good:
The zip is just aosp kitkat what I want to find out is if 4G works without any mods
Sent from my AOSP on Mako using XDA Premium 4 mobile app
N4 has no CDMA. Choose the option that's LTE/GSM auto prl.
Sent with Virtue
Hashcode has posted this Rom 4.3 but now is delete from his server, i reupload it because many guys search it.
Using new kernel 3.0.8 from other motos
- You can install in any rom-slot (i have on rom-slot 3)
- Still no camera
- Seems to be a lot faster and responsive
- Must reboot on set up screen to enable wifi
- Internal storage is now defualt
- HD codecs are not enabled (hence why higher free RAM)
- Keyboards and backlights work
- Virtual keyboard stops working once you use the physical one
- Much better battery life
Gapps: http://goo.im/gapps
ROM: http://www.speedyshare.com/3Gdcu/cm-10.2-20130814-UNOFFICIAL-solana.zip download via DM manager
Does data work on this for 883 or 862 radios?
Sent from my DROID3 using xda app-developers app
Wait. does this mean that Droid 3 developing is still alive? i thougth we played requiem for this phone! and what "Using new kernel 3.0.8 from other motos" means? that maybe the old kernel problems are getting looked into again? (like camera, HD codecs, etc)
I'm looking forward especially to a possible CM11, since i heard that KitKat is very optimized for 512MB RAM phones...
MrObvious said:
Does data work on this for 883 or 862 radios?
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
In my xt862 calls and sms working, for xt883 you need special build.prop:
http://forum.xda-developers.com/showthread.php?t=1804665&page=217
Sztunt1 said:
In my xt862 calls and sms working, for xt883 you need special build.prop:
http://forum.xda-developers.com/showthread.php?t=1804665&page=217
Click to expand...
Click to collapse
so the gsm hack will work for this as long as the same steps(flash radio,change build.prop) are followed?
I have a correct GMS build.prop that I edited for this rom. Mine is a XT862 with the XT883 rom for stock. I spent quite a bit of time trying to get to work. I think this phone is a good backup to my Moto X and Droid 4. If ya'll want me to post it let me know.
Gilly Monster said:
I have a correct GMS build.prop that I edited for this rom. Mine is a XT862 with the XT883 rom for stock. I spent quite a bit of time trying to get to work. I think this phone is a good backup to my Moto X and Droid 4. If ya'll want me to post it let me know.
Click to expand...
Click to collapse
Please. Does data work?
MrObvious said:
Please. Does data work?
Click to expand...
Click to collapse
Yes that it does let me set up a link for download.
Might be seeing a Safestrap update :fingers-crossed:
https://github.com/Hashcode/android_bootable_recovery/commit/8c0689dfcc492fcfd68d0a10a3383f10b8b82b4c
Sztunt1 said:
Hashcode has posted this Rom 4.3 but now is delete from his server, i reupload it because many guys search it.
Using new kernel 3.0.8 from other motos
- You can install in any rom-slot (i have on rom-slot 3)
- Still no camera
- Seems to be a lot faster and responsive
- Must reboot on set up screen to enable wifi
- Internal storage is now defualt
- HD codecs are not enabled (hence why higher free RAM)
- Keyboards and backlights work
- Virtual keyboard stops working once you use the physical one
- Much better battery life
Gapps: http://goo.im/gapps
ROM: http://www.speedyshare.com/3Gdcu/cm-10.2-20130814-UNOFFICIAL-solana.zip download via DM manager
Click to expand...
Click to collapse
I have to buy premium account to download it or use a download manager which also installs a bunch of crap? Oh dear...
Uploaded the file to another location:
Mega: cm-10.2-20130814-UNOFFICIAL-solana.zip 178.8 MB
Zippy: cm-10.2-20130814-UNOFFICIAL-solana.zip
Have you finally make data work on 4.3 for Droid 3?
i will try this tomorrow in my very very old droid 3...thank you:laugh:
thanks, works lovely on slot2. i personally find having no camera a bonus and only use this on wifi so for me everything works great.
Anybody gets data working?
Gilly Monster said:
I have a correct GMS build.prop that I edited for this rom. Mine is a XT862 with the XT883 rom for stock. I spent quite a bit of time trying to get to work. I think this phone is a good backup to my Moto X and Droid 4. If ya'll want me to post it let me know.
Click to expand...
Click to collapse
If you can,can you please post your modified build.prop for us? thanks.
So some people are saying they got data working, how was this done? Please help us get it working too.
How can I fic Camera issue...can anyone knows ...please tell me...