Response to:
http://forum.xda-developers.com/showthread.php?t=1621625
Just rooted my wife's V8 phone. Super easy! There is a problem though.
After installing CWM, when the phone reboots into CWM there is only a solid black screen. Remove battery and will boot back for normal operation. I tried several times with same result.
Thank you!
Mark Once Again said:
Response to:
http://forum.xda-developers.com/showthread.php?t=1621625
Just rooted my wife's V8 phone. Super easy! There is a problem though.
After installing CWM, when the phone reboots into CWM there is only a solid black screen. Remove battery and will boot back for normal operation. I tried several times with same result.
Thank you!
Click to expand...
Click to collapse
I have the same issue, hope someone has some insight!
I went back to V7 with LGNPST. Could never get CWM to install in stock in V7. I tried V4 as well. V4 would never get all the way to the main operation screen. Went back to V8 and re-routed with the LG_Esteem_Root_v2_Windows.
Have root and NO CWM. Something has changed.
Mark Once Again said:
I went back to V7 with LGNPST. Could never get CWM to install in stock in V7. I tried V4 as well. V4 would never get all the way to the main operation screen. Went back to V8 and re-routed with the LG_Esteem_Root_v2_Windows.
Have root and NO CWM. Something has changed.
Click to expand...
Click to collapse
followed the steps in the first post here and it worked flawlessly!
http://forum.xda-developers.com/showthread.php?t=1594885
Related
Hello all..
So I picekd up a t-mobile tab off craigslist yesterday, which was pre-rooted (no superuser though) and has the Roto JMI rom (if that's what it is) installed with the 2.6.32.9 [email protected] #1 kernel.
Last night I tried rooting/installing CWM with the one click thing, run.bat or run.sh in my case since I'm on a mac. It wouldn't work and got stuck in a recovery loop. Every time I would boot, it would go straight to recovery. So I managed to get a data wipe done and now I'm back to the way it was before.
I rooted it with SimpleOneClick and it's rooted with superuser now. I've installed rom manager, tried to flash CWM, but when I do it just says successfully installed CWM.
When I try to boot to recovery, it just stops at the 'Galaxy Tab' loading screen. No stock recovery, no CWM, no nothing. The only way to get it out of this mode is to issue an ./adb reboot bootlaoder command. After I do that, it works fine. Can start up, shut down etc.
What did I do??? Is there any way to flash the recovery via adb push like I did the first time I rooted my phone? I can't seem to find the recovery to push to the phone, so yeah.. I'm confused here.
Thanks!!
sanchez said:
Hello all..
So I picekd up a t-mobile tab off craigslist yesterday, which was pre-rooted (no superuser though) and has the Roto JMI rom (if that's what it is) installed with the 2.6.32.9 [email protected] #1 kernel.
Last night I tried rooting/installing CWM with the one click thing, run.bat or run.sh in my case since I'm on a mac. It wouldn't work and got stuck in a recovery loop. Every time I would boot, it would go straight to recovery. So I managed to get a data wipe done and now I'm back to the way it was before.
I rooted it with SimpleOneClick and it's rooted with superuser now. I've installed rom manager, tried to flash CWM, but when I do it just says successfully installed CWM.
When I try to boot to recovery, it just stops at the 'Galaxy Tab' loading screen. No stock recovery, no CWM, no nothing. The only way to get it out of this mode is to issue an ./adb reboot bootlaoder command. After I do that, it works fine. Can start up, shut down etc.
What did I do??? Is there any way to flash the recovery via adb push like I did the first time I rooted my phone? I can't seem to find the recovery to push to the phone, so yeah.. I'm confused here.
Thanks!!
Click to expand...
Click to collapse
Not sure about t-mobile tabs (I've heard they can be a bit tricky) but if you can install Modaco/paulobrian kernel (thread in the dev section) then that has a fully working CWM built in. Backups and restores work perfectly with this. The "official" one from koush (sp) is abandonware...
paulshields said:
Not sure about t-mobile tabs (I've heard they can be a bit tricky) but if you can install Modaco/paulobrian kernel (thread in the dev section) then that has a fully working CWM built in. Backups and restores work perfectly with this. The "official" one from koush (sp) is abandonware...
Click to expand...
Click to collapse
I actually just got it all set up after trying many things using this thread:
http://forum.xda-developers.com/showthread.php?p=11713685
Worked like a champ.
sanchez said:
I actually just got it all set up after trying many things using this thread:
http://forum.xda-developers.com/showthread.php?p=11713685
Worked like a champ.
Click to expand...
Click to collapse
Excellent .
Hi,
I followed the steps to root my phone using Soup or Root 2.06, which appeared to work. I got titanium backup and backed up some apps. I got clockwork mod and flashed it. I made a nandroid backup of stock. I got CM7 from
download. cyanogenmod. com/?type=stable&device=sholes
I put it on the SD card, booted into recovery and installed it. It said it worked from the clockwork screen and I rebooted. I flashed the cyanogen mod start screen for almost 3 hours and I pulled the battery. I had to reboot into recovery. I restored my backup. I went back into recovery and installed the same CM7 file, and again it said it was installed successfully. I rebooted and it flashed the start screen for another 30 minutes and I pulled the battery again, in preparation for getting a new version of CM, since mine did not appear to be working. At this point, I am unable to boot the device either normally or into recovery.
Is it unrecoverable?
Thanks!
Ha, just got it too boot. Recovered to my nandroid image.
Now I just need to find a ROM that works.
EDIT: Ok, I also tried Bugless Beast and had the same problem! After an hour, it still hadn't finished booting.
Anyone have any suggestions? Maybe I'm doing something wrong?
Did you clean/wipe your data before and after?
I was on MidTeam 1.3. i decided to change my lcd density via an app and this messed up everything. i went to CWM and do a wipe/factory reset. After this the system failed. I flashed a GB rom via Heimdall, everything went well, the phone booted as usually, i've seen the "click android to start" screen but when i clicked on it phone freezed. I tried to flash different ROMs both customs and stocks, they are all being flashed via heimdall succesfully but stacked at the same place. I finally flashed CM9 (again via heimdall). It booted normally, i saw the lock screen, i unlocked it by touching the screen then the phone freezed again. I made a search on the forum but did not find a similar case. Can anybody help? CWM is working fine, i can do wipe/factory reset or mount any partition.
jayaka said:
I was on MidTeam 1.3. i decided to change my lcd density via an app and this messed up everything. i went to CWM and do a wipe/factory reset. After this the system failed. I flashed a GB rom via Heimdall, everything went well, the phone booted as usually, i've seen the "click android to start" screen but when i clicked on it phone freezed. I tried to flash different ROMs both customs and stocks, they are all being flashed via heimdall succesfully but stacked at the same place. I finally flashed CM9 (again via heimdall). It booted normally, i saw the lock screen, i unlocked it by touching the screen then the phone freezed again. I made a search on the forum but did not find a similar case. Can anybody help? CWM is working fine, i can do wipe/factory reset or mount any partition.
Click to expand...
Click to collapse
see if anything in my signature can help you... good luck!!!
Thank you for the answer. I've succesfully flashed LPY rom from the list you provided the phone restarted, boot animation is ok, then the phone stacked at samsung logo. I've waited like 45 min but nothing has changed. I gave a try with a gingerbread rom but the odin process was freezed during datafs. I'll try another GB and if same thing happens, will try LPY of LPF once again.
jayaka said:
Thank you for the answer. I've succesfully flashed LPY rom from the list you provided the phone restarted, boot animation is ok, then the phone stacked at samsung logo. I've waited like 45 min but nothing has changed. I gave a try with a gingerbread rom but the odin process was freezed during datafs. I'll try another GB and if same thing happens, will try LPY of LPF once again.
Click to expand...
Click to collapse
It looks like you have got a Superbrick on your hands, mate.
It looks so, but as the phone opens both in download and recovery mode and stock lpy rom can be flashed, i still keep the hope for a possible miracle :/
Happy End
After trying hundreds way, my galaxy note is working now.
every rom i try to flash via Odin had some issues. LPY was flashed with succes but stack at boot.
LPF was not able to write DataFS
but i was able to enter CWM. So i flashed abbys kernel. Then i realised that wipe/data factory reset was working.
I formated /data and /system
then i mounted /data
reboot in recovery
again i mounted/data and then flash darky's rom. Everything looks running properly now.
Never ever i'll try a lpy rom
dont try LPF and LPY roms for now..
dont know why they kept making roms for it despite the constant warning... i guess a lot of people love the thrill of bricking expensive things.. lol..
Hi all. Yes I am a Noob first ever post in fact. I am however good at following directions and reading first. So far found nothing to address my issue.
Intro: First time flashing a Custom ROM although I did previously successfully install Cf-Root and Stock ICS from Sam Mobile using excellent instructions found here.
Background: 1) Decided to move from Rooted Stock ICS to new Aliance ICS -- spent all weekend reading up before developing courage to attempt. 2) Today Successfully downgraded to Gingerbread (Flashing the Darky Resurrection rom and following instructions exactly). 3) Uninstalled DarkyOTA and Cleared app data as specified in instruction 4) Installed Alliance OTA and ROM Config as specified 3) Successfully flashed a XXLPY repack via ODIN per http://forum.xda-developers.com/showpost.php?p=27199210&postcount=4instructions 5) Copied the Alliance ICS Rom Zip to external SD 6) Went into CWM as instructed and flashed file.
Result: received notices -- Preparing for Installation ... Cleaning the phone etc -- through to "Installing Extra Apps" ----- Have been staring at this part for 45 minutes now as no progress has been made.
Current situation: Staring dumbly at phone with fading hopes that the process will complete. Wondering how long my Mugen battery will hold out while I wait. Utterly clueless what to do next. Regretting my courage in attempting this.
Can someone help please?
Where did u come up with DARKY ICS it should be Alliance ICS, just recheck because DARKY ICS is for S2 did u flash S2 rom on Note......
bhasg1007 said:
Where did u come up with DARKY ICS it should be Alliance ICS, just recheck because DARKY ICS is for S2 did u flash S2 rom on Note......
Click to expand...
Click to collapse
You make a very good point --- but i can confirm that the zip was the following:\AllianceROM_N7000_ICS-v1.zip
Still hung (80 minutes now) on "Installing extra apps"
mutineer33 said:
You make a very good point --- but i can confirm that the zip was the following:\AllianceROM_N7000_ICS-v1.zip
Still hung (80 minutes now) on "Installing extra apps"
Click to expand...
Click to collapse
Download the Alliance rom again and reflash it, you might have a corrupted rom.
gee2012 said:
Download the Alliance rom again and reflash it, you might have a corrupted rom.
Click to expand...
Click to collapse
Thank you ---- I will try --- but first how do I get out of this hung install --- no button works --- if I just power down or pull the battery out before this flash has finished , will my phone still be usable?
mutineer33 said:
Thank you ---- I will try --- but first how do I get out of this hung install --- no button works --- if I just power down or pull the battery out before this flash has finished , will my phone still be usable?
Click to expand...
Click to collapse
Haven`t you made a cwm recovery (backup) before you went to flash the rom.
If so pull the battery, wait 30 seconds, insert the battery and go in recoverymode and restore your backup. If there is no backup go in downloadmode and reflash a stock rom and reroot this rom and start over.
gee2012 said:
Haven`t you made a cwm recovery (backup) before you went to flash the rom.
If so pull the battery, wait 30 seconds, insert the battery and go in downloadmode and restore your backup. If there is no backup go in downloadmode and reflash a stock rom and reroot this rom and start over.
Click to expand...
Click to collapse
OK will try --- Thank you and "Thanks" added
gee2012 said:
Haven`t you made a cwm recovery (backup) before you went to flash the rom.
If so pull the battery, wait 30 seconds, insert the battery and go in recoverymode and restore your backup. If there is no backup go in downloadmode and reflash a stock rom and reroot this rom and start over.
Click to expand...
Click to collapse
Ok -- and thanks again. The Good News is after pulling and reinserting the battery the phone booted up and into Alliance (it looks fantastic by the way) and appears to be working. A bit scary as the Flash process itself never actually completed. Since I am as of yet unfamiliar with the ROM I have no idea if I am missing anything (mostly just the wall paper and google search, play store, and Nova settings are displayed --- but app drawer has 49 apps and 36 widgets). So now I would be very interested in opinions as to ---
1) Anyway to validate whether EVERYTHING that was supposed to have flashed on this Rom is in fact there? Or can I assume that since the phone has booted up and is working in terms of voice and data connections that I have been lucky and all has gone well after the initial panic?
2) Related to the above should I reflash this ROM over itself to see if it fully completes this time?
Thank you again.
Congrats on getting past the hanging issue - it is always a nervous time when that happens. I would recommend you reboot the phone and check that it starts up again. If all is good, run with current system for a few days. If you start to notice anything wacky then would be the time to reflash ROM.
I'm a firm believer in "If it ain't broke don't fix it" Hopefully your Note will just work now.
Just before reflashing just confirm if you are fully rooted, install root explorer and check if u can paste in system if yes then for safety purposes just flash abyss 4.2 redpill kernel boot into the kernels cwm and perform wipe and reinstall the rom
TempusFudgeIt said:
Congrats on getting past the hanging issue - it is always a nervous time when that happens. I would recommend you reboot the phone and check that it starts up again. If all is good, run with current system for a few days. If you start to notice anything wacky then would be the time to reflash ROM.
I'm a firm believer in "If it ain't broke don't fix it" Hopefully your Note will just work now.
Click to expand...
Click to collapse
Thank you for the feedback. As it stands I Re-flashed again ---- and the flash hung again (this time @ "Cleaning phone". Started over a 3rd time and it went through perfectly.
No idea why the first two attempts failed -- but it looks like I am good to go.
bhasg1007 said:
Just before reflashing just confirm if you are fully rooted, install root explorer and check if u can paste in system if yes then for safety purposes just flash abyss 4.2 redpill kernel boot into the kernels cwm and perform wipe and reinstall the rom
Click to expand...
Click to collapse
Thank you for the suggestion. Per my post above, I think I am sorted out now.
I've got the same problem, are you on speedmod kernel???
Try to mount system and data from the mount menu.
I hope this can help you
I have the same problem... First I installed successfully the ROM but then i messed up something and my phone started to restart and then I went to recovery, Wiped Cache, Dalvik and then Wiped data, then i mount Data, started installing and it went to Installing extra apps and just froze... I hold the power button and it booted alliance rom only with nova launcher... No other launchers... I want to do this again but im afraid if it is going to get even worse Should I try again of doing this? I'm sure that the rom wasn't corrupted because the first time it worked... Shall i try flashing HydraCore and then flash alliance rom again?
EDIT: I've just flashed it again and it worked.. I have no idea what exactly happend, but it doesn't matter - it worked
Hi,
Yesterday when I tried to upgrade to RR v6 my note didnt want to boot correctly.
After I performed a full wipe with Abyss redpill, and installed rocket rom. When my note boots again it goes to recovery and constant reboots.
After alot of reading and trying out different recomendations I installed a GB rom first one w/o root. After one with root. In gb my phone boots and works.
When I install ics (tried stock and rr6) my phone doesnt get past the samsung galaxy note screen. Im able to go to download and install GB again. Tried alot of times now to install a ICS rom and allways same bug.
Any good tips ?
Try installing KL3 via PC Odin....root your phone and try installing ics after doing all 3 wipes....if it still won't work...go to alliance from ics ...and follow all the steps given by Robbie...
serphentos, check this out: http://forum.xda-developers.com/showpost.php?p=27467589&postcount=3716
I had same problem.. tried the above solution and it worked great.
dbchoong said:
serphentos, check this out: http://forum.xda-developers.com/showpost.php?p=27467589&postcount=3716
I had same problem.. tried the above solution and it worked great.
Click to expand...
Click to collapse
Thanks this solved my problem aswell