otg cable - HTC Incredible S

Is this true thing or just a scam?
http://www.ebay.com/itm/10cm-OTG-Mi...824707?pt=PDA_Accessories&hash=item4cfef29303
P.S I dont know this dealer and i m not promoting him either

Lasantha said:
Is this true thing or just a scam?
http://www.ebay.com/itm/10cm-OTG-Mi...824707?pt=PDA_Accessories&hash=item4cfef29303
P.S I dont know this dealer and i m not promoting him either
Click to expand...
Click to collapse
I think that is only an adaptor, so you should patch kernel to enable host mode; but afaik that patched-kernel works only on froyo rom..

That cable works BUT, you need a power source to actually have the OTG working. Look for some Y cable. The Y cable should look like this:
http://www.ebay.com/itm/USB-MALE-TO...ultDomain_0&hash=item337569b063#ht_500wt_1413
Except instead of mini usb end, you need female usb end.
you plug one end of the usb to phone and the other one to any usb power source.
You need the Y cable since Incredible S doesn't provide any power out from its microusb port, unlike the sgs2.
Of course you need to have a ROM that have the OTG capable kernel, I think those ICS should work, since OTG should be enabled on all ICS kernels.

wpra3 said:
That cable works BUT, you need a power source to actually have the OTG working. Look for some Y cable. The Y cable should look like this:
http://www.ebay.com/itm/USB-MALE-TO...ultDomain_0&hash=item337569b063#ht_500wt_1413
Except instead of mini usb end, you need female usb end.
you plug one end of the usb to phone and the other one to any usb power source.
You need the Y cable since Incredible S doesn't provide any power out from its microusb port, unlike the sgs2.
Of course you need to have a ROM that have the OTG capable kernel, I think those ICS should work, since OTG should be enabled on all ICS kernels.
Click to expand...
Click to collapse
If external power needed i dont see a use sadly .It would be nice to plug ur frnds pen drive and copy something in the move...

i actually tried it. Nothing happens. Don't waste your money. Your phone will not be able to detect the pen drive.

Lasantha said:
If external power needed i dont see a use sadly .It would be nice to plug ur frnds pen drive and copy something in the move...
Click to expand...
Click to collapse
Well, most people doesn't use flash drives these days, you can always use some online storage like dropbox etc, or email it to you.
The limitation of the system is the fat32, fat32 will not allow any file to be bigger than 4gb in 1 chunk, so you can't copy a whole hd movie out of someone's flash drive. And most flash drive now is 16gb+ and formatted in NTFS out of the box. All 3.5 external hdd is self powered, which makes it possible for you to read it from your device, but the chances of that drive is formatted in fat32 is really slim.
So yea, its a good thing to have but I think think its that usable though.

Can someone tells me which rom has OTG function?
Thx

there is a kernel support IS otg
but it's for android 2.2
http://forum.xda-developers.com/showthread.php?t=1097756
i have never seen otg support in any IS gb or ics rom

Related

HOST USB or USB HDMI Video Card ? Any way to use usb port to use usb devices ?

Usb port is it locked or there is possibility to use it like usb host ?
To manage copy pictures of a camera to phone without pc by usb adaptator.
Samsung talked about usb 2 hdmi cable and think if its real it use some usb video card supported by phone(because of physic material imcompatibily of hdmi nd usb)
May there is a way to dev a tool or hack to get it works...
Aah!! Finally somebody like minded!!
I had been scouring forums for something like this. USB OTG would be an excellent add on to this phone. If not OTG, at least host would be an excellent idea.
No idea whether the existing USB Host driver for Nexus one would work on this one.
The processor on SGS already supports USB Host (not sure about OTG though). This has been pointed out in their press release - w w w .samsung.com/global/business/semiconductor/newsView.do?news_id=1043
I am just wondering - should we request Samsung themselves via mass petition to open up this feature on SGS?
some USB devices might be compatible, like the 100/1000 Mbps USB to RJ45 plugs
those same ones works in Windows Mobile it should work as well for Android, however a driver will be required.
mouse and keyboard support should work out of the box
external USB keys for storage, or even USB mass storage devices should work out of the box as well.
usb audio... hmm... not sure what else at the moment
Hi AllGamer
Thanks for the reply. So how exactly do we get this going on SGS?
I am much more interested in having USB HDD support on SGS (hopefully without an ext power source - am I asking for too much? ).
Are you suggesting that the N1 fix should work here also? Can somebody help us with a "How To" to enable this on SGS?
Cheers!!
Coooolboyz
you can plug in any USB mass storage devices (USB hard drives) and it should work.
However, you might not get enough power from the usb port, you'll still need need power cord for your external usb hard drive.
I know on my HTC windows phones works like that, it should be the same for Android.
I'll try that when i get a chance.
you just a need a USB female to a mini USB male cable
yep!! you are right about power!!! I am trying to get a cable - hopefully in couple of weeks should have this.
but I am wondering if all this would work without proper drivers in it. Would SGS have USB HDD drivers in it already?
coooolboyz said:
yep!! you are right about power!!! I am trying to get a cable - hopefully in couple of weeks should have this.
but I am wondering if all this would work without proper drivers in it. Would SGS have USB HDD drivers in it already?
Click to expand...
Click to collapse
I can see one problem, You will only be able to use Fat32 drives unless someone compiles NTFS / HFS+ into the kernel. Ext3/4 is already done so I don't see many problems. What I recommend you do is get some sort of adaptor for Female USB > Micro USB and test it out with a flash stick or you can hack one .
Yeah - I understand the difficulties of having NTFS support outside the MS world.
I didnt know that ext3/4 were already a part of the kernel!! Is this by default available in all Android kernels?
For USB Host cable - I am guessing that this one can be used - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250671106072 (same as what Sven used for N1 USB Host capabilities).
But I seriously doubt plug and play would work (that would be too much of an expectation! )
Does any body have that cable here, who can check out if SGS does actually work in USB Host/OTG mode?
Sven has try with a Galaxy another Host Driver
h t t p : / / sven.killig.de/android/Galaxy/
Hm what can we do with these files?
However, any news about this?
Maybe, we could ask some Galaxy S kernel developers about this.

How to Enable usb - on the go?

please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave

Manual USB OTG working

Hi,
As you know, the Nexus 4 doesn't support USB OTG, meaning you can't use it with USB drives, gamepads, etc.. One reason is that the device doesn't seem to provide the neccessary 5V, the other reason is that it's not supported by the kernel.
So, I've been digging a bit, and now I can claim partial success! It's possible to supply the 5V yourself, and then activate USB host mode manually. It's a bit cumbersome, but for the beginning better than nothing. I tried a mouse and USB drives.
I should warn you that this is just a proof of concept and nothing that you'll want to use on a daily basis. Regular USB doesn't work properly while running this kernel, and I haven't checked battery consumption. Also this is based on Android 4.2.1, and if you have 4.2.2 you might not be able to make calls. That shouldn't be a problem as this is for testing only, though. Just let me say, I can't guarantee for anything, and I'm not responsible if you brick or blow up your phone.
You'll need:
- A USB OTG cable
- A USB Y cable to provide the 5V (It has two USB-A plugs and one USB-A socket.)
- My custom kernel
- Unlocked bootloader
- Android developer tools (adb, fastboot)
Load the boot image on your phone (this is not permantent):
Code:
$ fastboot boot myboot.img
Connect everything as follows (should be obvious):
- Y cable power plug (typically red) to the PC or adapter
- Other Y cable plug into the OTG cable
- OTG cable into the phone
- USB device into the Y cable socket
You need a remote shell on your device. Use adbWireless or similar to enable ADB over WiFi, then do:
Code:
$ adb connect 192.168.0.108:5555
(or whatever your phone's IP is)
$ adb shell
Now you should be on your phone. Do
Code:
[email protected]:/ $ ls /sys/kernel/debug/msm_otg/
and you should see 'mode' if the new kernel works. Now become superuser and enable USB host mode:
Code:
[email protected]:/ $ su
[email protected]:/ $ echo host > /sys/kernel/debug/msm_otg/mode
To disable USB host mode, use "none" or "peripheral". Note that at this point, I couldn't get it to go into regular USB mode. This means that MTP and adb over USB doesn't work yet.
Connect a device, and you should see more than two entries under "lsusb". Congratulations, your Nexus 4 has just recognized it's first USB device! If you install Stickmount (you have to sideload it since it's marked as not compatible), you can mount USB flash drives. Nexus Media Importer doesn't seem to work, though.
How does this work?
Basically, I just added the following line to the beginning of msm_otg_debugfs_init in msm_otg.c:
Code:
motg->pdata->otg_control = OTG_USER_CONTROL;
This enables the mode file in debugfs I use for mode switching. The next step would be to enable manual mode switching while keeping regular USB support, which shouldn't be too hard. Later down the line we can think about switching automatically on cable insertion, and maybe event getting 5V out of the device, but that would be a lot harder.
So, try it out, let me know if it works for you, and feel free to tinker around and improve what I've got!
Nice to see some progress going. Only thing that irks me is the Y cable though, kinda defeats the purpose of OTG to me...
Thanks a bunch for your work though!
Sent from my Nexus 4 using xda premium
You are a genius. :good:
Just connected a powered USB-HUB and a mouse to my OTG cable, flashed the kernel and typed the commands directly with a terminal app on the device.
It simply works !!!
Awesome development, one of my biggest gripes was the lack of USB OTG, I just assumed it was included as stock, that's why part of the reason I purchased this device.
This is awesome. Going to have to order some cables now. Since we have to supply power anyway, is it possible to support usb-otg + charging? Figure the phone is "too thin" anyway... I'll probably be making a 64gb microsdxc + battery case for the phone. Hello extended battery life.
Great work, I was just looking for this yesterday. Would it work with a USB dac (Assuming I had a powered usb hub)? Just asking because I think usb audio is often overlooked, and I would really like to have it.
Nice!
It would also be interesting to see if the slimport adapter allows otg pass through (their website says it does)... Then that's HDMI +charging +mouse/keyboard. Even miracast + mouse/keyboard would be awesome
Sent from my Nexus 4 using Tapatalk 2
Flynny75 said:
Even miracast + mouse/keyboard would be awesome
Click to expand...
Click to collapse
we've already got that, haven't we?
Finally! Now I will get to use my 1TB Portable HDD!!
My 8 gig is FREE! Lol
Sent from my Nexus 4 using Tapatalk 2
I'd like to be sure I'm getting a good USB Y cable. I see a few on Amazon, some have the word 'Power' in them, some don't. Most don't have a red plug. Are there some specific characteristics I should look for in the description to know that it's suitable for this purpose?
Here's one example that does NOT say 'Power' in its description.
http://www.amazon.com/OEM-UTStarcom-USB-Adapter-Cable/dp/B002W8EDOM/ref=pd_sim_e_2
Thanks, CaptainMuon, for your terrific work!
EDIT: After reading Scorpio16v"s post (and watching his video...thank you!), I thought I would try with a powered hub, since I don't have the Y cable. Also, I used the terminal emulator instead of adb, as he suggested. YES! It worked with a USB micro sd card reader adapter (I had bought it from ebay specifically for this Nexus 4 since I knew there was no sd card slot). That required stickmount, as CaptainMuon mentioned. Then I tried a USB mouse, and that worked also. This is great!
I'd still like to know more about the Y cable, as I asked above, even though this other method worked well for me.
Wonderful!!
R: Manual USB OTG working
Can the USB hub be non powered?
Inviato dal mio Nexus 4
Cice96 said:
Can the USB hub be non powered?
Inviato dal mio Nexus 4
Click to expand...
Click to collapse
When I powered off my USB powered hub, neither the USB Micro SD or the USB mouse worked.
Greaaatt news and excellent development on this front sir.
I was eagerly waiting for someone to come up with a solution to this topic.
But coming back I've read in so many places that a kernel can be tweaked so as to supply 5V to the socket!!(I'm considering that is the problem here. With power supply its working).
??
Sent from my Nexus 4 using xda app-developers app
Awesome, my one gripe with the phone is now (almost) gone!:good:
Any chance it it'll work with non-OTG cables/adapters (The plain USB host ones which don't have that extra pin)?
Just posting to thank you for all the time and effort you must of put in.
ziddey said:
This is awesome. Going to have to order some cables now. Since we have to supply power anyway, is it possible to support usb-otg + charging? Figure the phone is "too thin" anyway... I'll probably be making a 64gb microsdxc + battery case for the phone. Hello extended battery life.
Click to expand...
Click to collapse
It seems to be charging in USB host mode. (In my Y cable, the +5V line connects all three plugs, so the phone gets juice too. Not sure if that's always the case.) We have to do some testing to see if it charges at normal speed, etc.
eiriklf said:
Great work, I was just looking for this yesterday. Would it work with a USB dac (Assuming I had a powered usb hub)? Just asking because I think usb audio is often overlooked, and I would really like to have it.
Click to expand...
Click to collapse
I guess, if it is supported on any other android device, it should be possible here. Would be great if someone with a DAC would try it!
Flynny75 said:
It would also be interesting to see if the slimport adapter allows otg pass through (their website says it does)... Then that's HDMI +charging +mouse/keyboard. Even miracast + mouse/keyboard would be awesome
Click to expand...
Click to collapse
Dito. If someone has such an adapter, I'd be excited to know if it works.
sga999 said:
I'd like to be sure I'm getting a good USB Y cable. I see a few on Amazon, some have the word 'Power' in them, some don't. Most don't have a red plug. Are there some specific characteristics I should look for in the description to know that it's suitable for this purpose?
Here's one example that does NOT say 'Power' in its description.
http://www.amazon.com/OEM-UTStarcom-USB-Adapter-Cable/dp/B002W8EDOM/ref=pd_sim_e_2
Click to expand...
Click to collapse
Hmm, I don't know how you could make a Y cable that doesn't provide power from one end, and data from the other . It should work, but I know there are a lot of scam/poor quality cables out there, so I can't guarantee it. I've got this one:
http://www.amazon.de/Delock-Adapter...=sr_1_4?s=ce-de&ie=UTF8&qid=1361096352&sr=1-4
Yes good through bro...well done
But ohhhh man...i hate to use extra stuff like y cable and a powersource....
F**k google
Sent from my Nexus 4 using Tapatalk 2
you should post this to development section ;
let's see if other dev can also contribute to make a nice working kernel with these stuff;
without any bugs you had mention above.
BTW ;
Nice work Bro. :good:
by the way ; i can use my powerbanks as the power source. so i don't need any land electric sources.
not yet try it, i will need to find the XY cable first ( non powered USB Hub will do fine, and powered by the 11000Mah Powerbanks )

Htc desire 626s usb otg capabilities?

Hi, i recently rooted my phone and used the Post in the forums to do so, here is a pic of the kernal and all that. My question is why can i still not use my otg? Downloaded host diag, checker, helper, nothing is working. Can someone please tell me where to go from here? There are spaces so i could post the url.
http ://i63. tinypic. com/24ys9z5. jpg
seems kernel doesn't have the driver for it also the phones board doesn't supply power to the cable so you would need a y cable to supply power. Im still waiting for HTC to post the kernel source so I can make the modifications I need to it. It's been almost a month since they said they elevated my request for the source to their dev team if its not posted in a week I'm going to write them again.
There is a app I saw the other day called "stick" something that enabled phones with no otg support to use one. It was in a YouTube video about must have root apps , sorry I couldn't help more than this. I did order an otg cable after watching it.
Ok, ill look to see if it works
Nope. Still won't work. Power must be supplied for it to be registered to the phone.
E]Well i bought a powered otg y cable plug in usb portto charger the other end to my phone and the other to my usb 128gb.. nothing
still diesnt detect but it does on my samsung . So it must be the phone not the cable
Gnnex said:
E]Well i bought a powered otg y cable plug in usb portto charger the other end to my phone and the other to my usb 128gb.. nothing
still diesnt detect but it does on my samsung . So it must be the phone not the cable
Click to expand...
Click to collapse
I had no luck with a powered Y-cable either. I got OTG to work with my XT894 only after connecting a powered USB hub to my OTG cable, then connecting a USB flash drive to the hub.

Can it be done ?

Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I know need it to be with one usb end and not a very long cable . Thanks
Dude905 said:
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Thanks
Click to expand...
Click to collapse
It's probably possible, but it wouldn't work.
Take a look:
https://www.youtube.com/watch?v=0nqY2EXTHhE
Do some reading here:
http://forums.webosnation.com/hp-touchpad/331349-2gb-ram-upgrade-touchpad-attempt.html
In my opinion everything is possible with the right "CODE" and that is attached to a human memory with very smart neurons!
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Dude905 said:
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Click to expand...
Click to collapse
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
HP_TOUCHPAD said:
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
Click to expand...
Click to collapse
That would work ? that would be great if it can . I would like to place movies onto the usb flash drive and play off it, So you saying it can work ? Thanks
Of course it works, you can play movies directly from the USB flash drive. You will need to supply power to the USB drive, connected by wire or using a Power Bank.
https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_9?ie=UTF8&qid=1486006080&sr=8-9&keywords=OTG+micro+usb+hub
If you want to make it portable:
https://www.amazon.com/2600mAh-Portable-External-Battery-Charger/dp/B01N5O3OX3/ref=sr_1_10?
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I only need it to be with one usb end and not a very long cable . Thanks
Is a Micro USB Port, is the same as your charger. The one that you connect to your Tablet. Search and do some reading on how it works, is very simple but you have to understand how all comes together, there is information on this site also.
Once you have Android install on your tablet, it works the same as others Android or Tablet Devices.
I finally got a OTG Micro USB straight cable, usb on one end and micro on the other, try it out and nothing happens, is there a setting with the tablet that needs to be turn on or off ? thanks
What version of Android are you using? or the type or ROM?
HP_TOUCHPAD said:
What version of Android are you using? or the type or ROM?
Click to expand...
Click to collapse
Its ......Kitkat .... Android 5.1.1 version and cm-11-20161219-NIGHTLY-MLQ-tenderloin .... This is very stable ... Thanks
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
HP_TOUCHPAD said:
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
Click to expand...
Click to collapse
I don't see nothing since nothing happens once I connect it, though if I use the cable to connect to my computer I am able to see the tablet internal drive, but not to a flash drive from tablet to flash . This is why I was asking what's exact cable type for this tablet port . I'm thinking it isn't the correct one . There so many different sizes out there. Thanks for your suggestion, much appreciated
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
HP_TOUCHPAD said:
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
Click to expand...
Click to collapse
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Dude905 said:
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Click to expand...
Click to collapse
All the information is on this web site:
https://forum.xda-developers.com/showthread.php?t=1582771
And for the second time this is the OTG cable that I have, which I posted the link : https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_31?ie=UTF8&qid=1486568545&sr=8-31&keywords=micro+usb+otg If you look at the specification of how it works it tells you is a "Micro Usb HUB Adaptor with Power Powered"
The HP touchpad or old devices do not offer power to the micro usb port, you need a Y adapter one to supply power to the USB flash drive and the other one for data.
That is why I said, do some research to understand the connection, which it clearly shows on the Amazon product.
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Dude905 said:
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Click to expand...
Click to collapse
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
HP_TOUCHPAD said:
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
Click to expand...
Click to collapse
Yeah, those devises sound really good . I might just get one for that fact alone .... Though, it isn't really what I needed

Categories

Resources