Hi,
I'm trying to enable my BA (Helmi/Baniaczek R2) to use WPA encryption with my Netgear router.
Can this be curently enabled? If not, is there someone (Baniaczek?) who could add suppot for WPA (and replace WEP) in this ROM?
Thanks
DEVICE: BA (Orange SPV M2000)
ROM: Helmi_BA_WM2k5_AKU3[1].5_v1.4.CF2.R2
RADIO: 1.15.00
With my router, Netgear DG834GT, BA works well with WPA protection enabled.
Great. Thanks. I set it up and all works perfectly.
I get the same problem i cant connect with any security on
isnt there any other software to conntect rather can using the windows software
Did you check that the shared key is exactly the same? Some apps need the hex version of the key, so try that.
If you do not connect all then this could be an access list problem (based on the MAC address of your PDA). Check this.
If yu provide more info about the problem it will help...
HTH
my Wifi show that my diamond is connected with my router. however, when i use internet explorer try to accesss to google/yahoo, the following message pop up:
"The page cannot be found. Check the name and try again"
i have double check and i am sure i enter the right address www.google.com/www.yahoo.com
i dun understand why this message pop up even thought i have connected wid my router. i am upgraded my router firmware to the newest one!!!!!
Rouer type is : Netgear Rangemax
Channel: 6
Region: United States( i am living in Uk and the router do not let me change the region to UK)-(i dun think this is the problem as my Ipodtouch connect with my router and work perfectly)
Mode: B and G( i have downgrade from Auto 108mbps)
Security option: WPA-PSK [TKIP]
any1 plz kindly help me wht wrong wid the diamond or router---> the main reason i buy diamond is to connect wifi!! thank!!
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Bellacluchy said:
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Click to expand...
Click to collapse
i have upgrade the rom to the excatly same as ur, i try to connec to my university wireless and still cant use the WIFI, i think the problem is on the diamond, not on the router!!!!
dosado said:
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Click to expand...
Click to collapse
hi, yes, i am chek it and it is connect using : My Work Network. i dun knw wht wrong with it and i am thinking of refund!!! the main reason i buy this is to connect wifi but it dun seem to be working!!!!
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible..
I stopped the assistend at first run and configured my MMS setting manually.. WLAN works now!
Click to expand...
Click to collapse
hello, can u tell me excatly wht should i do? it is possible to disable that "Verbindungs-Setup" witout hard reset??? hard reset will it erase all my picture music etc plus the current ROM?? cuz i didnt know how to update the rom and the current rom is one of my friend update for me!!!!!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Click to expand...
Click to collapse
can u plz tel me wht to do. thnx!!
i do not know which registry entries the Connection Setup Wizard changes..
You can make a backup of your ROM with SpriteBAckup, then HardReset and Restore the Backup with Merge Level 1 of Sprite Backup. The Internal strorage will not be deleted by a hard reset!
Comm Manager - seting - WIFI - 3-d page and slider to the left
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
duncho said:
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
Click to expand...
Click to collapse
can u tell me how to update the rom step by step plz!! and where can i find d ROM?? thnx u!!!
It is not the ROM issue.
I have the same problem. I updated the ROM, but the problem exists as before.
Sometimes my phone connects the internal modem and not my WiFi network, why?
Ps.: I am using WIFI router for internet (WPA-PSK [TKIP])
I have an original Samsung Galaxy Tab 7" and am having trouble connecting to my wireless network, as my router is set (on purpose) to channel 13. Due to congestion, I am unable to select a different channel (1-11).
Is there anything I can do to enable my GT-P9000 to support Channel 13? It's rooted & running CyanogenMod + cdesai's Jelly-Bean ROM (cm-10-20120730-EXPERIMENTAL-p1-cdesai). All my other devices (iPad/iPhone) appear to support Channel 13, so I just need to get this working now.
I'm sure it's probably just a matter of setting the device to support EU WiFi standards, but am unsure how to do this....
Any ideas?
strawdog74 said:
I'm sure it's probably just a matter of setting the device to support EU WiFi standards, but am unsure how to do this....
Any ideas?
Click to expand...
Click to collapse
Success!!
I solved my own question, for those stumbling across this thread, simply do the following :-
1. Install SSHDroid on the device
2. Install PuTTy on your computer (SSH terminal emulator)
3. Connect to your device by entering the HOSTNAME or IP address into PuTTy
4. Login using user=root password=admin
5. Paste the following command into the terminal :-
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'EU');"
6. Restart wifi or Reboot device
I am now able to see my WiFi network on Channel 13 using WiFi Analyzer (a very useful app by the way).
Can't you just run terminal app rather than SSH from PC?
Sent from my GT-P1000 using xda app-developers app
''Wifix manager'' can set this without using the scripts, just type in the advanced ''EU'' or whatever country code you want.
Sent from my GT-P1000
More info... On the phone setting using *#*#4636#*#* i got this:
PingIpAddr: fail, ip addr not reachable
Ping hostname (www.google.com): fail, host unreachable
Http client test: fail ioexception
....
Gprs service: disconnected
Set preferred network type:
Wcdma preferred (this is the one chosen now)
plzzzz i need help
XperiaZFUn said:
plzzzz i need help
Click to expand...
Click to collapse
what is exactly your problem?
gripfly said:
what is exactly your problem?
Click to expand...
Click to collapse
my problem is the 3g don't work even if my apn is correct and h+ logo is there on top but On the phone setting using *#*#4636#*#* i got this:
PingIpAddr: fail, ip addr not reachable
Ping hostname (www.google.com): fail, host unreachable
Http client test: fail ioexception
....
Gprs service: disconnected
Set preferred network type:
Wcdma preferred (this is the one chosen now)
- Do you use any mods are something?
- Removed the sim once?
- Some apk deletet or deactivated/freezed?
- Download the networksetting again.
- (Ask friends if their have a problem with the Internet?)
Gesendet von meinem C6603 mit Tapatalk
I have a problem changing dns in my router because its locked by the cables company.
This is what i did:
Changed dns to 213.202.238.238
Secondary 1.2.3.4
In the wireless properties in my computer
Closed vp6 protocol
Changed the same dns for the Hotspot
Closed vp6 protocol
Went to the ercovery
May i mention that the computer says usb device is not recognized!
Clicked on the download firmware
Chose the Hotspot
Phone connected to the Hotspot but stuck in the finding firmware package, please help!