my Wifi show that my diamond is connected with my router. however, when i use internet explorer try to accesss to google/yahoo, the following message pop up:
"The page cannot be found. Check the name and try again"
i have double check and i am sure i enter the right address www.google.com/www.yahoo.com
i dun understand why this message pop up even thought i have connected wid my router. i am upgraded my router firmware to the newest one!!!!!
Rouer type is : Netgear Rangemax
Channel: 6
Region: United States( i am living in Uk and the router do not let me change the region to UK)-(i dun think this is the problem as my Ipodtouch connect with my router and work perfectly)
Mode: B and G( i have downgrade from Auto 108mbps)
Security option: WPA-PSK [TKIP]
any1 plz kindly help me wht wrong wid the diamond or router---> the main reason i buy diamond is to connect wifi!! thank!!
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Bellacluchy said:
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Click to expand...
Click to collapse
i have upgrade the rom to the excatly same as ur, i try to connec to my university wireless and still cant use the WIFI, i think the problem is on the diamond, not on the router!!!!
dosado said:
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Click to expand...
Click to collapse
hi, yes, i am chek it and it is connect using : My Work Network. i dun knw wht wrong with it and i am thinking of refund!!! the main reason i buy this is to connect wifi but it dun seem to be working!!!!
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible..
I stopped the assistend at first run and configured my MMS setting manually.. WLAN works now!
Click to expand...
Click to collapse
hello, can u tell me excatly wht should i do? it is possible to disable that "Verbindungs-Setup" witout hard reset??? hard reset will it erase all my picture music etc plus the current ROM?? cuz i didnt know how to update the rom and the current rom is one of my friend update for me!!!!!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Click to expand...
Click to collapse
can u plz tel me wht to do. thnx!!
i do not know which registry entries the Connection Setup Wizard changes..
You can make a backup of your ROM with SpriteBAckup, then HardReset and Restore the Backup with Merge Level 1 of Sprite Backup. The Internal strorage will not be deleted by a hard reset!
Comm Manager - seting - WIFI - 3-d page and slider to the left
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
duncho said:
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
Click to expand...
Click to collapse
can u tell me how to update the rom step by step plz!! and where can i find d ROM?? thnx u!!!
It is not the ROM issue.
I have the same problem. I updated the ROM, but the problem exists as before.
Sometimes my phone connects the internal modem and not my WiFi network, why?
Ps.: I am using WIFI router for internet (WPA-PSK [TKIP])
Related
Plz Help Me.....
I Cant Connect My Mobile To Pc Via Activesync Whenever I Upgrade To Windows Mobile 5. I Had The Same Problem Even In Tuma v1.3...
I Have ActiveSync v4.1.0 (Build 4841)
And So I M Not Able To Copy All The Files Of Ext Rom.....
Plz Someone Help Me...
AS 4.2 went final the other day, try the latest version. AFAIK it contains a lot of bug fixes.
Also, some people have problems when plugged into a USB hub, try a direct connection or even another port.
Did you check and see if your mobile network setting (local PC) is set correctly?
Goto My network --> Properties
and you should see a netowrk connection for Windows Mobile Device.
Go to properties, and enable the Internet Protocol for the device.
Hi,
I'm trying to enable my BA (Helmi/Baniaczek R2) to use WPA encryption with my Netgear router.
Can this be curently enabled? If not, is there someone (Baniaczek?) who could add suppot for WPA (and replace WEP) in this ROM?
Thanks
DEVICE: BA (Orange SPV M2000)
ROM: Helmi_BA_WM2k5_AKU3[1].5_v1.4.CF2.R2
RADIO: 1.15.00
With my router, Netgear DG834GT, BA works well with WPA protection enabled.
Great. Thanks. I set it up and all works perfectly.
I get the same problem i cant connect with any security on
isnt there any other software to conntect rather can using the windows software
Did you check that the shared key is exactly the same? Some apps need the hex version of the key, so try that.
If you do not connect all then this could be an access list problem (based on the MAC address of your PDA). Check this.
If yu provide more info about the problem it will help...
HTH
i'm trying to flash hardSPL to X1. always got error 240. i've switched off firewall, hard reset the phone.. same problem. searched google..nothing find. any help plz?
connect the phone and run the hardspl as admin, something should pop up on the phone display for u to allow, cant remember exactly what but click ok or something in that relation
establish a solid active sync connection first
Hi my friend
i had the same problem but i figure out .
Go to [settings ---> connections ---> USP To PC] chose ActiveSync and uncheck Enable advanced network functionality
i wish you a Good luck
ur phone is synced?
conan206 said:
Hi my friend
i had the same problem but i figure out .
Go to [settings ---> connections ---> USP To PC] chose ActiveSync and uncheck Enable advanced network functionality
i wish you a Good luck
Click to expand...
Click to collapse
this, ofcourse, you have to do on the phone. But yes, make sure you have made a connection with active sync. that active sync and your pc recognize the xperia as a windows mobile device, before you attempt to do hard-spl.
Hi all,
I've flashed the latest Nik_IncredibleS and it works nicely. Seems my phone is working faster
But I've some problems about USB mount (NOTE: I couldn't see any camera-related issues described in rom's xda-forum thread.)
I don't have any internet connection at home, so I'm connecting to the Internet over my network provider's 3G via my phone. I'm activating 3G connection on my phone, then connecting the phone to the PC via USB cablle. Now, here's what happening when I plug my USB cable to PC:
1) Phone asks me what to select.
2) I select USB Connection.
3) Network connection symbol appears on my PC's desktop.
4) My phone asks me the same thing.
5) Network connection symbol disappears ony my PC's desktop.
6) Again, I select "USB Connection".
7) Again, network connection symbol appears.
8) Again, my phone asks.
9) Again, network symbol disappears on the PC.
10) Again, I select USB Connection.
.
.
.
I successfully connect my PC to the internet after repeating steps 4-7 at least 3 times!
I've flashed USB Mount fix (described in the thread) but nothing changes.
Here's the details:
ROM: Latest Nik_IncredibleS
Kernel: 2.6.35.14-RCMIX-VIVO-gf17016b-dirty
Radio: 20.4802.30.0822P_3822.10.08.28_M
Network: HSDPA (Turkey-AVEA)
Please help.
Thx in adv.
programci_84 said:
Hi all,
I've flashed the latest Nik_IncredibleS and it works nicely. Seems my phone is working faster
But I've some problems about USB mount (NOTE: I couldn't see any camera-related issues described in rom's xda-forum thread.)
I don't have any internet connection at home, so I'm connecting to the Internet over my network provider's 3G via my phone. I'm activating 3G connection on my phone, then connecting the phone to the PC via USB cablle. Now, here's what happening when I plug my USB cable to PC:
1) Phone asks me what to select.
2) I select USB Connection.
3) Network connection symbol appears on my PC's desktop.
4) My phone asks me the same thing.
5) Network connection symbol disappears ony my PC's desktop.
6) Again, I select "USB Connection".
7) Again, network connection symbol appears.
8) Again, my phone asks.
9) Again, network symbol disappears on the PC.
10) Again, I select USB Connection.
.
.
.
I successfully connect my PC to the internet after repeating steps 4-7 at least 3 times!
I've flashed USB Mount fix (described in the thread) but nothing changes.
Here's the details:
ROM: Latest Nik_IncredibleS
Kernel: 2.6.35.14-RCMIX-VIVO-gf17016b-dirty
Radio: 20.4802.30.0822P_3822.10.08.28_M
Network: HSDPA (Turkey-AVEA)
Please help.
Thx in adv.
Click to expand...
Click to collapse
Did you install your phone drivers? You can do it via htc sync. If you dont, it will remains the same.
Sent from my HTC Incredible S using XDA App
zukri90 said:
Did you install your phone drivers? You can do it via htc sync. If you dont, it will remains the same.
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
i too face this problem! tried installing drivers nothing changed.. now using my card reader to copy files
hi!
my config:
BMM recovery
slot1 Mentor ROM
slot2 CM 10.2.1-maserati (official)
on both factory reset after flash
ISSUE:
on slot1 wifi works on most access points, but on some wan't connect (eg Linksys WAG200G) - no connection with wizard or manualy add
on slot2 wifi scanning doesn't work at all, to connect to wifi I must add spots manually,
wifi scanners apps from play (eg WiFi Analyzer) doesn't work too, on this ROM connection to the above Linksys works after manualy add
any conceptions??
croolyc said:
hi!
my config:
BMM recovery
slot1 Mentor ROM
slot2 CM 10.2.1-maserati (official)
on both factory reset after flash
ISSUE:
on slot1 wifi works on most access points, but on some wan't connect (eg Linksys WAG200G) - no connection with wizard or manualy add
on slot2 wifi scanning doesn't work at all, to connect to wifi I must add spots manually,
wifi scanners apps from play (eg WiFi Analyzer) doesn't work too, on this ROM connection to the above Linksys works after manualy add
any conceptions??
Click to expand...
Click to collapse
Hi,
First, I would try wipe cache/dalvik.
If doesn't do anything, try this:
1. Open terminal emulator and type
su (enter)
wifical.sh (enter)
Also read on other forums that some people had problems with wifi on CM 10.2 using CWM recovery.
Try using TWRP recovery. But it would require to use Safestrap.
No idea why it won't connect to that AP on Mentor's ROM. Heard that some D4's are picky, some are not. Can you use WPS for that?
Hope it helps.
Also, does it work in stock? If your Wifi doesn't work in stock, it might be the antennae.
Antenna is ok, on cm or slimkat wifi connect with this ap
On stock I have timeout with authentication, password is correct 100%
Sent from my DROID4 using XDA Free mobile app