i'm trying to flash hardSPL to X1. always got error 240. i've switched off firewall, hard reset the phone.. same problem. searched google..nothing find. any help plz?
connect the phone and run the hardspl as admin, something should pop up on the phone display for u to allow, cant remember exactly what but click ok or something in that relation
establish a solid active sync connection first
Hi my friend
i had the same problem but i figure out .
Go to [settings ---> connections ---> USP To PC] chose ActiveSync and uncheck Enable advanced network functionality
i wish you a Good luck
ur phone is synced?
conan206 said:
Hi my friend
i had the same problem but i figure out .
Go to [settings ---> connections ---> USP To PC] chose ActiveSync and uncheck Enable advanced network functionality
i wish you a Good luck
Click to expand...
Click to collapse
this, ofcourse, you have to do on the phone. But yes, make sure you have made a connection with active sync. that active sync and your pc recognize the xperia as a windows mobile device, before you attempt to do hard-spl.
Related
Can anyone help me. My Wizard won't connect to ActiveSync. However when I connect my USB cable it does charge the battery. I've tried hard resets several times with no result. When I hold the buttons for Bootloader mode, the computer says it does not recognize the usb device. as soon as I let go the buttons it does nothing, no usb connection what so ever.
Help
you probably already tried this but this was my activesync problem:
settings->USB to PC ->uncheck "Enable advanced network functionality"
abasu2003 said:
you probably already tried this but this was my activesync problem:
settings->USB to PC ->uncheck "Enable advanced network functionality"
Click to expand...
Click to collapse
That solved main AS problem few days ago.
In witch program you mean ActiveSync? or something else
abasu2003 said:
you probably already tried this but this was my activesync problem:
settings->USB to PC ->uncheck "Enable advanced network functionality"
Click to expand...
Click to collapse
To make it a little more clear:
Start->Settings->Communications Tab->USB to PC
Then uncheck "Enable advanced network functionality
I have the same problem for the past 2 months
My ActiveSync is also not working. I tried the steps you mentioned above but that did not work either .
Any other suggestions?
Thanx
Sorry, when I go to start, settings, communication, I don't see pc to usb!!
Did you try USBKILLER? http://www.smartphonefrance.info/download/USBKiller.cab
* copy USBKiller.cab to your handset device
* unplug usb cable
* install USB Killer
* run USB Killer
* select "Serial"
* click on "Yes"
* replug the cable and synchronize your device with ActiveSync
no succes it still won't connect
Try a newer version of AS. That may do. or just uninstall and re-install AS.
I fixed the previous issue now I'm stuck on connecting to my PC via USB with activesync.. I had it working fine, now all of the sudden after a hard reset it won't connect, I searched for other similar issues but didn't get anything on here. It just will not connect, I've tried the uncheck advanced thing in settings on my phone, another hard reset, deleting/reinstalling activesync, I can't get it to sync, it will only charge when connected. Thanks for looking
I better start reading entire posts
You need to provide better info. What operating system is on your computer?
Does your computer/OS give a sound to aknowledge the new hardware/device connected? Like when you plug in a USB key?
Check windows device manager and remove any USB devices that may be your Kaiser and restart the system (without the Kaiser connected).
Have you tried deleting devices from activesync? If it is stuck on a different device, it won't sync another and a hard reset probably makes it look like a new/different device.
Fast replies, thanks! No sound when connecting, no green icon, it stays grey of course, I'm on XP 32bit, using activesync 4.5 and using WMWiFirouter to connect at the moment to surf. Usually I tether using it as a usb modem which won't work of course right now. I just deleted the device, still no go... Oh and i deleted everything under my USB submenu in hardware manager/device manager, and I just get the same popup still, "USB device not Recognized, One of the usb devices attached to this computer as malfnctioned, and windows... etc etc"
"USB device not recognised" comes from the PC? Does that mean the PC sees the USB device but doesn't know what to do with it?
Disable WMWiFiRouter on the phone and see if that affects anything. If it has anything installed on the PC try uninstalling that.
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
You didn't answer:
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.
JFX said:
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
Click to expand...
Click to collapse
If you want to do that, you could try to uninstall the previously installed device driver by going to Control Panel -> System -> Hardware tab -> Device Manager -> Universal Serial Bus Controller...go from there
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Check AS connection settings if USB is enabled. If it is, disable it, put the phone in bootloader and see what happens.
You don't have anything like WM5storage installed on the device, do you?
Better to reflash the phone (by storage card) before format your PC.
It's bedtime for me, good luck. Try the G.W.E.N.I. thread and wiki and see if anyone has your problem before. I think there has been.
JFX said:
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Click to expand...
Click to collapse
Silly question but did u try to reboot your PC?
EDIT: try to read this threads, maybe there is a solution for u:
http://www.google.com/cse?cx=000825...esync&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
my Wifi show that my diamond is connected with my router. however, when i use internet explorer try to accesss to google/yahoo, the following message pop up:
"The page cannot be found. Check the name and try again"
i have double check and i am sure i enter the right address www.google.com/www.yahoo.com
i dun understand why this message pop up even thought i have connected wid my router. i am upgraded my router firmware to the newest one!!!!!
Rouer type is : Netgear Rangemax
Channel: 6
Region: United States( i am living in Uk and the router do not let me change the region to UK)-(i dun think this is the problem as my Ipodtouch connect with my router and work perfectly)
Mode: B and G( i have downgrade from Auto 108mbps)
Security option: WPA-PSK [TKIP]
any1 plz kindly help me wht wrong wid the diamond or router---> the main reason i buy diamond is to connect wifi!! thank!!
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Bellacluchy said:
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Click to expand...
Click to collapse
i have upgrade the rom to the excatly same as ur, i try to connec to my university wireless and still cant use the WIFI, i think the problem is on the diamond, not on the router!!!!
dosado said:
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Click to expand...
Click to collapse
hi, yes, i am chek it and it is connect using : My Work Network. i dun knw wht wrong with it and i am thinking of refund!!! the main reason i buy this is to connect wifi but it dun seem to be working!!!!
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible..
I stopped the assistend at first run and configured my MMS setting manually.. WLAN works now!
Click to expand...
Click to collapse
hello, can u tell me excatly wht should i do? it is possible to disable that "Verbindungs-Setup" witout hard reset??? hard reset will it erase all my picture music etc plus the current ROM?? cuz i didnt know how to update the rom and the current rom is one of my friend update for me!!!!!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Click to expand...
Click to collapse
can u plz tel me wht to do. thnx!!
i do not know which registry entries the Connection Setup Wizard changes..
You can make a backup of your ROM with SpriteBAckup, then HardReset and Restore the Backup with Merge Level 1 of Sprite Backup. The Internal strorage will not be deleted by a hard reset!
Comm Manager - seting - WIFI - 3-d page and slider to the left
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
duncho said:
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
Click to expand...
Click to collapse
can u tell me how to update the rom step by step plz!! and where can i find d ROM?? thnx u!!!
It is not the ROM issue.
I have the same problem. I updated the ROM, but the problem exists as before.
Sometimes my phone connects the internal modem and not my WiFi network, why?
Ps.: I am using WIFI router for internet (WPA-PSK [TKIP])
There used to be an option to disable advanced network functions under USB to PC in the connections folder. In WM 6.5 I am unable to find such an option and Vista won't detect the phone.
Please help as I need to flash to an older ROM that will work with Navigon 7.31, which btw, anyone have recommendations?
Thanks.
usb to pc
Go to Start, settings, connections, usb to PC and uncheck "enable faster data synchronization.
Hey,
i read the thread in the Hacking Section and because iam a new member here i cant post in this thread.
My problem is that i tried to unlock my Phone (Lumia 820) via this Tool (aiyingyong the chinese one) and i get an error after downloading an archive or something like that. See the picture.
I have Win 8.1 64bit, Visual Studio 2012 Update 4 but no WP8 Emulator. But everything else is working like WP Power Tools, XAP Deployer and Unlock and Locking the Phone for Development.
I tried to change the name of the Phone and started the chinese app as Admin.
Just this Tool wont work. I just want the 10 unsigned apps instead of the 2 that i have right now with my free Dev Account.
Can you please help me?
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Amirphp said:
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Click to expand...
Click to collapse
Thanks i will check it later
Why don`t you guys try the "Dreamspark/Intuit" trick and gain the 10 apps limit?I know its a little frustrating with all those translations but at the end it`s worth to have a try.
Thanks CV bro for reply....
But...Now My problem solved and my phone is unlocked for 10 app....
@thread OP....check that thread at that page 10 and ....And follow the steps....thats work perfectly.
Same problem but not getting fixed
I tried it on my Lumia 520 and I too have this problem. I tried the ways mentioned by the member in 10th page of the TUT on doing this but failed. It justs downloads something everytime when i connect phone ( a 10 MB file which i see in the directory of the software). I tried deleting the device drivers and installed it again, failed. I renamed the phone to Lumia 920, failed. I installed the softwares from various sources including the attachment provided by the member who had given some steps for this problem but failed. Can someone help out me
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Amirphp said:
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Click to expand...
Click to collapse
I have SDK and my phone was registered but now unregistered it and it detects my phone.
gouthamhere said:
I have SDK and my phone was registered but now unregistered it and it detects my phone.
Click to expand...
Click to collapse
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Click to expand...
Click to collapse
I did everything until Step 4. Connected the phone to the PC without internet on both, and this error happens http://snag.gy/SYnU2.jpg and if i try again with internet on in PC, it downloads something ( http://snag.gy/MGPVd.jpg ) inside the Chinese software and the Launcher Error ( http://snag.gy/ps4P7.jpg ) shows up.
I tried it many times and tried with names Lumia 520, 920 and 1520 but nothing works.
I think its some problem with my drivers though my pc detects it and i can even register and unregister it through Developer Tool provided by Microsoft.
gouthamhere said:
http://snag.gy/MGPVd.jpg.
Click to expand...
Click to collapse
Previously that was happened with me too....
But after new version installed from developer thread...worked that...
And its detects my phone instantly as i connect...did not tried to upgrade.
* I did one more thing on My PC...when i was getting this http://snag.gy/MGPVd.jpg error.
Goto Control pannel > Region and Language > Administrative > Change System Locale > Chinies(Tradistiona, Taiwan).
Apply And Reboot....
Then Uninstall Chinies tool and Repeat the same process what i have mentioned in previous post....thats it.
Hello, sorry for bad english language I'm italian and I'm 14.
You have to click CTRL+R, write "intl.cpl", go to "Administrative" and click "Change System Locale", select "Chinese, Simplified, China", and once applied click Restart now.
After reboot it should work, if you can't do it here's a video that explains everything. (It's in italian)
ww w.youtube . com /watch? v=DWTyIaTMbLY&app=desktop
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
I did what u said, after clicking the blue botton,
The gray phone know has an open lock but doesn't happened
anything.
Click to expand...
Click to collapse