Help, no activesync connection - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Can anyone help me. My Wizard won't connect to ActiveSync. However when I connect my USB cable it does charge the battery. I've tried hard resets several times with no result. When I hold the buttons for Bootloader mode, the computer says it does not recognize the usb device. as soon as I let go the buttons it does nothing, no usb connection what so ever.
Help

you probably already tried this but this was my activesync problem:
settings->USB to PC ->uncheck "Enable advanced network functionality"

abasu2003 said:
you probably already tried this but this was my activesync problem:
settings->USB to PC ->uncheck "Enable advanced network functionality"
Click to expand...
Click to collapse
That solved main AS problem few days ago.

In witch program you mean ActiveSync? or something else

abasu2003 said:
you probably already tried this but this was my activesync problem:
settings->USB to PC ->uncheck "Enable advanced network functionality"
Click to expand...
Click to collapse
To make it a little more clear:
Start->Settings->Communications Tab->USB to PC
Then uncheck "Enable advanced network functionality

I have the same problem for the past 2 months
My ActiveSync is also not working. I tried the steps you mentioned above but that did not work either .
Any other suggestions?
Thanx

Sorry, when I go to start, settings, communication, I don't see pc to usb!!

Did you try USBKILLER? http://www.smartphonefrance.info/download/USBKiller.cab
* copy USBKiller.cab to your handset device
* unplug usb cable
* install USB Killer
* run USB Killer
* select "Serial"
* click on "Yes"
* replug the cable and synchronize your device with ActiveSync

no succes it still won't connect

Try a newer version of AS. That may do. or just uninstall and re-install AS.

Related

Problem with Tilt, thanks for viewing

I fixed the previous issue now I'm stuck on connecting to my PC via USB with activesync.. I had it working fine, now all of the sudden after a hard reset it won't connect, I searched for other similar issues but didn't get anything on here. It just will not connect, I've tried the uncheck advanced thing in settings on my phone, another hard reset, deleting/reinstalling activesync, I can't get it to sync, it will only charge when connected. Thanks for looking
I better start reading entire posts
You need to provide better info. What operating system is on your computer?
Does your computer/OS give a sound to aknowledge the new hardware/device connected? Like when you plug in a USB key?
Check windows device manager and remove any USB devices that may be your Kaiser and restart the system (without the Kaiser connected).
Have you tried deleting devices from activesync? If it is stuck on a different device, it won't sync another and a hard reset probably makes it look like a new/different device.
Fast replies, thanks! No sound when connecting, no green icon, it stays grey of course, I'm on XP 32bit, using activesync 4.5 and using WMWiFirouter to connect at the moment to surf. Usually I tether using it as a usb modem which won't work of course right now. I just deleted the device, still no go... Oh and i deleted everything under my USB submenu in hardware manager/device manager, and I just get the same popup still, "USB device not Recognized, One of the usb devices attached to this computer as malfnctioned, and windows... etc etc"
"USB device not recognised" comes from the PC? Does that mean the PC sees the USB device but doesn't know what to do with it?
Disable WMWiFiRouter on the phone and see if that affects anything. If it has anything installed on the PC try uninstalling that.
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
You didn't answer:
On Activesync, did you go to File, Delete Mobile Device? Try that, make a new connection.
JFX said:
Nope, nothing is installed on my pc from WMwifirouter, and I tried the phone without the router app also, no go.. My last resort is a format on my pc. I think I need to find and delete the registry or some driver files or point that one Unknown USB device in device manager to the correct driver for my phone.. But I don't know how. Or if that's what will fix it.
Click to expand...
Click to collapse
If you want to do that, you could try to uninstall the previously installed device driver by going to Control Panel -> System -> Hardware tab -> Device Manager -> Universal Serial Bus Controller...go from there
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Check AS connection settings if USB is enabled. If it is, disable it, put the phone in bootloader and see what happens.
You don't have anything like WM5storage installed on the device, do you?
Better to reflash the phone (by storage card) before format your PC.
It's bedtime for me, good luck. Try the G.W.E.N.I. thread and wiki and see if anyone has your problem before. I think there has been.
JFX said:
Oh yes, I did, tried that, and there was my previous one there and I deleted it. Now there are no devices in the list.
Click to expand...
Click to collapse
Silly question but did u try to reboot your PC?
EDIT: try to read this threads, maybe there is a solution for u:
http://www.google.com/cse?cx=000825...esync&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8

Can't sync with PC after flashing WM6.5

There used to be an option to disable advanced network functions under USB to PC in the connections folder. In WM 6.5 I am unable to find such an option and Vista won't detect the phone.
Please help as I need to flash to an older ROM that will work with Navigon 7.31, which btw, anyone have recommendations?
Thanks.
usb to pc
Go to Start, settings, connections, usb to PC and uncheck "enable faster data synchronization.

[q] gt-i9305 usb failures

Hey everyone got a slight issue with my i9305 connecting to my pc. ive done some forum searching before this but not quit the same symptoms and i tried their steps to fix it before i ruled anything out. so the problem im having is that when i plug my phone into the desktop it doesnt recognize the device.and its only MY desktop. 2 laptop and other 3 desktops are just fine. any suggestions pointers or helpful adive is greatly appriciated.
Also i tried 3 diff. cables as well and reinstalling keis and drivers and what not.
TragedysFinest said:
Hey everyone got a slight issue with my i9305 connecting to my pc. ive done some forum searching before this but not quit the same symptoms and i tried their steps to fix it before i ruled anything out. so the problem im having is that when i plug my phone into the desktop it doesnt recognize the device.and its only MY desktop. 2 laptop and other 3 desktops are just fine. any suggestions pointers or helpful adive is greatly appriciated.
Also i tried 3 diff. cables as well and reinstalling keis and drivers and what not.
Click to expand...
Click to collapse
I once had a similar problem but in my case some usb drivers failed to install even though the device was detected.
Remove the battery from your phone leave it a minute or so then put it back and power your phone up.
Sent from my GT-I9305 using Tapatalk 2
TragedysFinest said:
Hey everyone got a slight issue with my i9305 connecting to my pc. ive done some forum searching before this but not quit the same symptoms and i tried their steps to fix it before i ruled anything out. so the problem im having is that when i plug my phone into the desktop it doesnt recognize the device.and its only MY desktop. 2 laptop and other 3 desktops are just fine. any suggestions pointers or helpful adive is greatly appriciated.
Also i tried 3 diff. cables as well and reinstalling keis and drivers and what not.
Click to expand...
Click to collapse
Are you using Win7? Sometimes that "wannabe inteligent" system picks the wrong drivers. Make sure you have the drivers on your PC (i.e. install Kies first) thereafter connect your phone. If it doesnt show, check in the device manager of your PC, look for mobile device and reinstall the drivers (rightklick on mobile device). Go for a manual search and point it to the Kies directory werde the drivers are stored.
If it was working on a different PC, you may as well compare the installed drivers on both. Maybe you find a difference.
Hope that helps
Good luck
When I rooted mine I forgot to do this and had the same symptoms...
Restore USB Settings after Backup / Restore:
•Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen.
Now press your 'Back' key to exit PhoneUtil.
Your phone is now back to default USB operation.
Raistlin1158 said:
When I rooted mine I forgot to do this and had the same symptoms...
Restore USB Settings after Backup / Restore:
•Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen.
Now press your 'Back' key to exit PhoneUtil.
Your phone is now back to default USB operation.
Click to expand...
Click to collapse
I just want to add: "MTP + ADB" means USB debugging is on (Developer options) and if you select "MTP" only USB debugging is of
Jumbodriver said:
I just want to add: "MTP + ADB" means USB debugging is on (Developer options) and if you select "MTP" only USB debugging is of
Click to expand...
Click to collapse
Yes that's correct.
Sent from my GT-I9305 using Tapatalk 2

[Q] not getting detected by any PC via USB

My S Advance I-9070 recently got formatted. I was able to recover my installed Apps, photos, music via gmail account. However Contacts which were on the phone, couldn't get restored. Since i have a contacts.spb recent copy, on my PC, tried to connect S Advance to this PC and it is not getting detected as additional device. The Samsung Kies software also doesn't recoganize the phone. Except that the phone battery gets charged when connected. I tried different cables and PCs, and took to a service center, this phone didn't get recognised. I have backed up all data to SD card on the phone. Is this a new issue with S Advance ?
Please help.
bobede said:
My S Advance I-9070 recently got formatted. I was able to recover my installed Apps, photos, music via gmail account. However Contacts which were on the phone, couldn't get restored. Since i have a contacts.spb recent copy, on my PC, tried to connect S Advance to this PC and it is not getting detected as additional device. The Samsung Kies software also doesn't recoganize the phone. Except that the phone battery gets charged when connected. I tried different cables and PCs, and took to a service center, this phone didn't get recognised. I have backed up all data to SD card on the phone. Is this a new issue with S Advance ?
Please help.
Click to expand...
Click to collapse
Try to turn USB debbuging on, and see if something shows up in Windows explorer.
If you are on JB: Settings> Developer Options> USB Debugging
shut_down said:
Try to turn USB debbuging on, and see if something shows up in Windows explorer.
If you are on JB: Settings> Developer Options> USB Debugging
Click to expand...
Click to collapse
Try this one
This is when your Samsung not popup usb notifier at phone upper menu bar.
Resolution
1. Unplug the USB cable
2. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode.
The good mode should be PDA. Even if the mode is PDA, switch to Modem and then back to PDA.
3. Plug the USB cable.
Try settings-more settings under wireless and network. There are 2 to try. Usb utilities if that does not work. Try turning kies on or off on the phone. No idea why but kies on the phone does it on both computers I use with my 9070. Drivers can be a real pain for this too. When i upgraded to LQG I had to update the drivers too, but that could be my computer too.

HDB driver??

No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
Hi suite works all annoyingly well for me. Dunno what's wrong on your end, buddy.
Annoyingly, because it always pings my desktop and opens whenever I connect to my PC.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
USB-Configuration in developeroptions checked?
If any Option like it should be, try reinstall of HiSuit on PC?! (! If de & reinstall, SAVE your [email protected] BEFORE uninstall Hisuite!)
Have same issue on two p20 pro, both brand new, and factory settings. Can't figure it out
CaptainKaracho said:
USB-Configuration in developeroptions checked?
If any Option like it should be, try reinstall of HiSuit on PC?! (! If de & reinstall, SAVE your [email protected] BEFORE uninstall Hisuite!)
Click to expand...
Click to collapse
Ill try that now
Edit: I have mpt checked, so i have no idea.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
Turn off USB debugging.
Completely delete all drivers whilst not connected. In Windows click options show all devices, including hidden.
Install hisuite.
Next connect the phone then let it install.
Then disconnect and turn on USB debugging.
Let it install that too.
Can you see the device?
PS: there's only so many ways it can connect.
Nuking the driver then reconnecting afresh is the best way.
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
hexen88 said:
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
Click to expand...
Click to collapse
Doesnt work
Sorted HiSuite P20 Pro back on running Fixed, Thank's
kingcapning said:
Doesnt work
Click to expand...
Click to collapse
### The only way it worked for me was after being connected to the PC and have opened the HiSuite THEN GO to the last step and it looks is the only way it changes for charging only. If you don't have either the PC connected and on the HiSuite program, it doesn't change at all. Check bellow on the ###.:good:
Well it worked for me any way Thank's hexen88
Quote:
Originally Posted by hexen88
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
### go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
Also check your cable, some cables only allow charge only.
leighfwarren said:
Also check your cable, some cables only allow charge only.
Click to expand...
Click to collapse
It must of been a bug, once i updated to 9.0 it now connects fine and has done since updating.
If it still helps i think i got it.
Use the original huawei charging cable you got with the phone.
I tried it all.. tethering, debugging, hisuite etc.. but nothing worked
1. step Install HiSuite on computer,
2. step plug in your phone with original cable,
3. step HiSuite on computer will run by itself,
4. step select transfer files on your phone,
5. step computer will ask you if you all it to install HiSuite on your phone and click ok,
6. step on your phone pop up will show to install HiSuite on Huawei.
Maybe also go to settings - connections - usb thetering (if needed) and thick it.
Hope it helps, it did for me - but barley lost my mind...
Good luck,
Toni

Categories

Resources