Upgrade Qtek 9100 (G3) ROM from 5.0 to 6.5 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello !
I want to upgrade my Qtek 9100 (G3) 5.0 ROM to 6.5. I have tryed to find some working rom for it, but not successfully.
Can anyone help me with that ? Also some tutorial would be great.
-Qtex

read this tutorial if you want to upgrade on device http://forum.xda-developers.com/showthread.php?t=298613

Hakim Rahman said:
read this tutorial if you want to upgrade on device http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse

Related

! Urgent ! SPV M3000 - Blocked on 1st screen !?

Hello,
I've tried to upgrade my French SPV M3000 to the Aku 3.5 V3.5.5.1 Rom...and the upgrade window stopped at 96%...
My SPV M3000 is a G3, with IPL : 1.03 & SPL : 1.03.0000.
Now The PPC is bloked on the 3 colours screen which shows the IPL, SPL but no GSM & no OS on it...so I can't synchronize it with my PC to do any upgrade such as with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe...
What's the solutions ?
Tks for your help...
up, please
Hi i've got the same problem... i was flashing to crossbow 1.5 and it stopped at 5%
please help
guys.. number one.. make sure ur device is CID unlocked before you flash anything but the carrier ROM. for now, go back to the WM5 ROM that your carrier released and try again. I'm guessing that your device isnt a G4, which there would be a totally different procedure to flash WM6 for.
-Nstefanelli-
ok i found something... download http://www.tm-phonedownloads.com/files/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe this and flash yuor pda to wm5 by t mobile... its sux but works :]
KreTsky said:
ok i found something... download http://www.tm-phonedownloads.com/files/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe this and flash yuor pda to wm5 by t mobile... its sux but works :]
Click to expand...
Click to collapse
Tks,
So, I've to take 1st that *Ship.exe which is the TMobile rom...I've seen that rom on the tuto about flashing G3 rom...
regards
I'll test and go back
eleger91 said:
Tks,
So, I've to take 1st that *Ship.exe which is the TMobile rom...I've seen that rom on the tuto about flashing G3 rom...
regards
I'll test and go back
Click to expand...
Click to collapse
Flashing to 2.x IPL/SPL is probably a good idea in your case (hope you have CID unlocked before doing so..) ..I didn't think you can run WM6 with IPL/SPL 1.x.. Not sure if AKU 3.5 means WM5 or WM6..

Hello!! And which is the best rom for QtekA9100?

hi!
I new here, Im Brazilian from SP and my English is very ugly!!
I have a Qtek A9100 with a PT-BR WM5, but I like change to a English WM5.
which is the rom for this device?
A9100 is same Wizard 100
ROM version: 2.22.17.1 PTB
Date: 23/03/06
Model: WIZA100
thanks a lot!
demo.ckp said:
hi!
I new here, Im Brazilian from SP and my English is very ugly!!
I have a Qtek A9100 with a PT-BR WM5, but I like change to a English WM5.
which is the rom for this device?
A9100 is same Wizard 100
ROM version: 2.22.17.1 PTB
Date: 23/03/06
Model: WIZA100
thanks a lot!
Click to expand...
Click to collapse
As Qtek A9100 is a wizard all wizard wm6 rom are good for this device,if you have any experience in unlocking and upgrading than it's good,otherwise this forum wud be a good place to read and learn how to unlock and upgrade,you'll find all your answers here ,however to choose a rom,this link might help:-
http://forum.xda-developers.com/forumdisplay.php?f=356
good luck
zabardast_1 said:
As Qtek A9100 is a wizard all wizard wm6 rom are good for this device,if you have any experience in unlocking and upgrading than it's good,otherwise this forum wud be a good place to read and learn how to unlock and upgrade,you'll find all your answers here ,however to choose a rom,this link might help:-
http://forum.xda-developers.com/forumdisplay.php?f=356
good luck
Click to expand...
Click to collapse
Im reading any topics about flash rom, this forum have a lot of information.
I choose two rom to try: t-mobile and faria wm6
today I try the first flash
thanks
I change my rom to WM6 Faria Crossbow using two guides write here!!
Same Problem
Hi, I have the exactly problem
My Qtek 9100 is a G4, do you got upgrade your rom, can you help me with your receipt?
I want to upgrade for WM6.
Can you help me.
Best regards
Carlos Arruda said:
Hi, I have the exactly problem
My Qtek 9100 is a G4, do you got upgrade your rom, can you help me with your receipt?
I want to upgrade for WM6.
Can you help me.
Best regards
Click to expand...
Click to collapse
G4 device cannot be unlocked and upgraded like a G3 device,so never ever try to CID unlock the your phone using G3 methods,you'll certainly 'BRICK' your phone.
To upgrade a G4 device,there's another method,read and undrstand it before performing any upgrade,check this link for G4 upgrading method,good luck
http://forum.xda-developers.com/showthread.php?t=329147
Hello,
Please, how can I tell whether my Qtek A9100 is a G3 or G4?
thanks

Need Q9100 rom

Hey guys i need Original Rom for Qtek 9100
i wanna flash it with original room to get WM6
please any help
cyberbot said:
Hey guys i need Original Rom for Qtek 9100
i wanna flash it with original room to get WM6
please any help
Click to expand...
Click to collapse
There's no official (original) wm6 qtek 9100 rom update from the provider.You'll have to flash the latest custom build Wm6 Roms,which you'll find so many here in this forum.
first,you'll have to check & confirm,which device you have, G3 or G4.
If its a G3 phone,you'll have to SIM/CID unlock the phone first and then upgrade to any wm6 rom,but if its a G4,you can upgrade through 'HardSPL' or 'SoftSPL' method.
Cheers!
i have G4
i want to get advice in wich Rom you advise me to use

upgrading Wizard G3 from WM5 to WM6

Dear all,
i have T-Mobile MDA G3 with me and is unlocked, i can use sim of any cellular company on my cell and working fine. Its SPL/IPL is 1.08 can anybody please suggest me the link to download WM6 or WM6.1 full featured and free whichever is good for my wizard moreover any further steps in order to be on a safer side while updating my wizard. Looking forward for your response.
Your wizard is simunlocked, but is it also CID Unlocked ?
Dear Gammapooka,
thanks for your reply, i m newbie in this field can you please advise me how to check whether it is CID unlocked or not :$ moreover any torrent - source from where i can download wm6 to upgrade it.
can anybody please suggest me from where i can download the WM6 software and which one is good for my WIzard G3.
barjees said:
can anybody please suggest me from where i can download the WM6 software and which one is good for my WIzard G3.
Click to expand...
Click to collapse
If you are looking for wm6 Rom,then there's no official wm6 rom update offered by any vendor,but if you want to upgrade to any custom build wm6 rom then check out the below link:-
http://forum.xda-developers.com/forumdisplay.php?f=356
But,before upgrading to any wm6 rom,you got to have your phone CID unlocked first,how to CID unlock? read the guide here :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
thanks for your reply zabardast_1 but still i m confused bcoz lots of ppl have posted lots of comments. I did download T_MOBILE_WIZARD_DOWNLOAD (RUU) is it rom which will upgrade my WM5 to WM6 or i need something else? at present my IPL/SPL are 1.08 looking forward for your response.
barjees said:
thanks for your reply zabardast_1 but still i m confused bcoz lots of ppl have posted lots of comments. I did download T_MOBILE_WIZARD_DOWNLOAD (RUU) is it rom which will upgrade my WM5 to WM6 or i need something else? at present my IPL/SPL are 1.08 looking forward for your response.
Click to expand...
Click to collapse
Like I said earlier,no official wm 6 upgrade is offered,so this rom is also wm5 and not wm 6,if you want to upgrade to wm6,you'll have to upgrade through custom build wm6 roms,present here in this forum.

** QTEK 9100 WITH WINDOWS 5.0: possible upgrade to windwos 6.5 ? **

I own a Qtek 9100 (G3) with OS Windows Mobile 5.0, would it be possible to upgrade to version 6.5 of Windows Mobile. How? There are real improvements with S.O 6.5?
anyone can me answer?
yes dear
yes dear you can
Hi,
I am a happy owner of a Qtek 9100 which originally had Windows Mobile 5.0 ITA.
course and following the upgrade guide I proceeded on my PocketPC (G3) with "Windows 6.1 beta 2 carbonara" I have to say is very stable.
The only thing I noticed is that after you upgrade your phone with the first ROM so I changed the values IPL and SPL but I do not put them equal, and that is me put them IPL 1.01 to 1.06 SPL I tried to upgrade 3 times and always successful but the values are always different.
So finally I decided to continue, I unlocked the CID with a dedicated tools and since I could not find a good link for the ROM T-LOVE I decided to directly load the ROM of Windows 6.1 to carobonara.
The procedure was successful and the phone is a bomb. I am very satisfied with this ROM, but my question now is:
I find myself with these values
IPL 1.01
SPL 1.06
gsm 01.12.10
OS. 4.0.0.
And 'normal IPL and SPL or need to be in the same? Is there a way to update only those? And from now on I can load any other ROM widzard for G3 even those with Windows 6.5?
Thanks again for your attention!
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
grishitu said:
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
Click to expand...
Click to collapse
you can update from 5.0 to 6.5 directly. .
first read this
http://forum.xda-developers.com/showthread.php?t=332320
after you done it, just download one ROM from this link
http://forum.xda-developers.com/showthread.php?t=492532
and that is that . .
p.s. for this you must have Windows XP and Active Sync 4.5
Help me whit a Qtek 9100
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
gracco said:
anyone can me answer?
Click to expand...
Click to collapse
yes,actually i have a qtek a9100 or htc wizard with windows mobile 6.5,and i think i´m very lucky because the rom works perfect! i downloaded from here,but i dont remember which one exactly,but leave me a message so i can send you by e-mail or something

Categories

Resources