i9000 - Canada Bell - Call Freeze - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I have an issue about my phone.
It freeze when starting a call and it really long before the real screen show up.
Everything else work and even internet on wireless (not wifi)
I have try many different Radio and ROM and all act the same.
Anyone have an idea ???

Related

3G Issues still - Help needed!

Hey all,
I've had my TyTn II for a while now and everything's been ok.
I recently upgraded my rom, from an old Duttys rom to a new one, since doing that my phone would not pick up signal at all - I couldn't phone and people couldn't phone me - it looked like my phone had reception but the second I went to call all the bars dropped off.
I posted on here. - It's the radio people assured me. I swapped radios. 1 million times.
Everytime, the 3g would work for a few hours and then the same problem.
I decided it was the rom. I installed a different duttys rom yesterday, and low and behold, the phone worked. Calls, tinterwebs the works.
Got home. Same old problem.
The one thing that links the roms is they're both Windows 6.1.
I'm using a MDA Vario 3 on T-Mobile UK.
Can anyone help me?
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
bazzlad said:
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
Click to expand...
Click to collapse
If you want to stick with WM6.1 do as follows:
(i hope you've got HARDSPL...)
Run the TriColor mode and install radio same as i do (signature)
when it start to restarts hold the camera button so you can boot tricolor again without loading rom.
Install your favorite ROM,
When everything is configured, run Connection setup again and restart your phone. Test it.
If it still doesent give anything it could problem with some third party apps or your device itself.
You can try my configuration it works perfectly for me.
Cheers,
Chris
Giving that a go today - will chuck you over some $$$ wonga if it works! Thanks.
I hope that everything will work fine for you. Im always happy to help.
Cheers,
Chris
Tried - No joy - but thanks - anyone else got any ideas?
I have a similar issue. On my 3rd phone now (Orange) due to phone not connecting in 3g mode to make calls. Seems to be an issue where it fails to switch automatically between GSM and 3G, although it often shows there is a network connection (even though there isn't - really anoying).
However, by turning off hsdpa it finally seems (6 hours or so) to stay connected to the network and able to make calls. Can anyone else with the same problem try this?
I don't enough about hsdpa to understand why having it switched on should make a difference, unless it changes the functionality of the radio. Suggestions welcomed.
You may have a faulty handset.
Exactly the same problem as my friend experienced with his MDA Compact 2. I tried flashing new ROMS and it seemed to fix it but in time he'd begin to suffer from a disappearing signal bar and random dropouts before, during and after calls.
You could try turning your network to GSM only and see if that makes a difference. I'm on T-Mobile and I know that last week I couldn't use my phone in 3G mode for 36 hours or more owing to a network problem in my area, gsm worked fine though.
not convinced about the faulty handset although it is a possibility.
I am starting to think that with the hsdpa enabled it somehow changes the way data and voice calls are handled.
Really could do with some opinions on hsdpa and whether enabling it or disabling it changes the functionality of the phone or the interaction with the networks
bazzlad said:
31 views - 0 replies.
No one had this before? Or any ideas? Seriously, if someone solves this I'll paypal them £20 as a thanks - it's getting on my nerves THAT much!
Click to expand...
Click to collapse
Just search a bit in the Kaiser forum, quite a few people (including me) have had similar problems. Radio hardware on some units is faulty and requires return to service center for repair.
The radio starts by not being able to send/receive calls/data on 3G while it still works on GSM, then later GSM will eventually fail too.
T-mobile have had problems with there 3G in the last week in northern Uk. I am still getting a few problems each day as you describe. I dont know, but I am assuming they are doing some repairs
kilrah said:
Just search a bit in the Kaiser forum, quite a few people (including me) have had similar problems. Radio hardware on some units is faulty and requires return to service center for repair.
The radio starts by not being able to send/receive calls/data on 3G while it still works on GSM, then later GSM will eventually fail too.
Click to expand...
Click to collapse
Still, my experience is that there maybe faulty hardware out there, but by disabling hsdpa everything is fine. I'm currently making plenty of calls on 3g network, dowloading lots of data on 3g network. My previous problems were when the handset showed it was connected to the 3g network when it wasn't able to take or make calls or download data. Before, the only thing I had tried was manually selecting GSM in the connection settings.
I'm not saying that disabling hsdpa is a good thing or a solution, just that it might help some smart person to identify what is going wrong.
Any help out there?

3G Data Stalls. Radio On/Off Cures

Currently running 2.2 FRF83, but I experienced this on 2.1 too...
Sometimes whilst browsing, the browser will stall when requesting a new web page. Eventually the page will timeout with a page unavailable or data connection error.
At the same time no other data functions work - email, Twitter etc. Also tried Dolphin browser but no luck, so I don't think its browser related.
The 3G icon shows both up/down arrows flashing as if it's requesting and receiving data.
While this is happening, a quick check of the phone info page does indeed show packet and byte counts increasing for both PPP Sent and PPP Received.
It's as if the data is coming down, but the phone doesn't recognise this.
To fix the issue I turn the radio off and back on. This immediately solves the issue, until it happens again, which could be in a few minutes again.
Have tried different radio settings like WCDMA Preferred, WCDMA Only, Auto prl etc. Still the same.
Has anyone else ever experienced this? Any possible solutions?
I have the same exact thing happening to me. I'm on AT&t in the US. Very frustrating, I was hoping that 2.2 would fix this. I've sent an email to Google regarding this and have yet to hear anything back.
So I'm not the only one then. It'll be interesting to see how many more Nexus One owners experience this issue.
Hope there's a solution somewhere out there.
Same ned a fix bad
Sent from my Nexus One
I get the same problem using the FroYo radio (4.06).
No problems with the older 4.04 radio though. Unfortunately I can't use that with 2.2 of course.
I was in America using At&t and had no problems with 2.1. I moved to Turkey and got on Turkcell and had problems then either.
I installed 2.2 (since the first ones came out FRF50) and am now on the latest and ever since I have had similar problems. I have to reboot the phone when this happens and then it works for many hours until it happens again.
When I go into market it pops up a dialogue box and makes me hit retry twice and then works.
It would be nice if this was straightened out.
I just got off the horn with Google support. The SE had me do *#*#INFO#*#* then bring up the menu and choose "select radio band" I then set the phone for "USA Band" the phone confirmed success. This seems to have worked for me. Hope it helps you.
Yep, I already have mine set to Euro Band. The "3G Freeze" still occurs for me.
Interested to hear how you get on with that Band setting nonetheless.
I'm on AT&T and had fantastic signals prior to the FRF83B update. Since I updated the radio, I'm having the exact same issues. It's becoming a pain when I'm trying to stream internet radio, because it cuts out every 20 or 30 seconds. I also noticed the other day, where I use to get strength, I had *no* reception.

Milestone Wi-fi/3G connects but not send data

Hello there,
As a newcomer, I found out these foruns filled up with great information and guys willing to help, so came here to ask for some help ....I am both excited and dissapointed with my brand new Milestone. Bought the handset about 5 days ago, which came with Android 2.0. Then updated it straight away to version 2.1 via "Motorola Software Update". So far so good ...here´s the problem I am facing :
While connected to wi-fi or 3g(issue is easier to notice due to 3G icon at the task bar, which points out in those small arrows data that is being sent/received) phone stops to receive data out of the blue. All connectios are cut off(it also happens when the handset is locked up). Some basic trouble shooting i did:
- tested all pcs connected to the same wi-fi network. No issues detected for these
- reset wi-fi router configs. Didn´t work
- tried other wi-fi router. Presented same issue
- swapped another carrier chip to test 3g connection. Presented the same issue
- tested my GSM chip on ther phone. Worked properly
- Reset phone to default settings. This time the connection took longer to drop, like 30 minutes, instead of the usual 10 minutes. After the first drop, it´s started behaving the same way again.​
It seems pretty much that there an issue going on here (obvious...hehehe). I am considering the following:
- Might be a software issue. So, right now i am downgrading it back to 2.0 version, check if it works properly and then move to 2.1 hopping to get the issue fixed.
- Use retailer warranty and claim for a new phone =/​
Could you guys help me out ??
Thanks in advance and Best Regards !!!
Guys, after downgrading version to 2.0, phone stills presenting the same issue. I think it´s turning into hardware issue =/....does anyone have a clue about it?
Thanks and Best Regards!!!

problem with data connection for Tmobile USA

So I've been messing around with more roms lately trying to find one that has all the features I like and that are easy to use. I am on the latest clockwork recovery through rom manager. I was on the korean radio 5.08? and flashed around with superhybrid, miui bundle, desire hd, rodriguez miui. and an oc-kernel for 1152mhz? something like that.
My phone just won't connect to the data connection no more, on any of the rom. i tried changing my APN to a couple. I tried switching back to my usual rom, I tried upgrading to the radio to the latest korean radio of 5.12. I was able to get edge connection for a brief moment, but it barely works. When I say brief i mean like 2 minutes then there goes my edge connection....
I'm hoping this is network side in this general area only, but is there a possible problem on my phone? any solution if it is?
I would try it out at different part of town that you usually get 3G.
If it's like that all the times everywhere than it might be the phone but I doubt it.
I had the same problems for about 2 weeks here at work (everywhere else it work fine). Tmobile must have fixed the tower cause it's working fine now at work also.

[Q] Wifi connected but not working?

Hi, I've searched for similar issues, but can't find one, so please forgive me if it's covered elsewhere. I have a UK EE HTC One (1.28.61.7) which is fully stock (not even rooted) and aside from an issue with the capacitive buttons being hit and miss have one other issue. When I connect to a wifi network (tried on multiple networks) it will connect, and be fine for a minute or two, but then it will show that it's connected, but refuse to transfer any data. The only way to get it back to life, is to turn wifi off and on again.
Has anyone else come across this, or should I go back to EE, and swap it?
TIA!
Yes I noticed this, at times it disconnects but if you give it time it reconnects ...never had this problem with my old phone. Samsung glide.
******************************
HTC ONE (Stock so far) Just got 2013-04-21
Samsung Captivate Glide
Installed:
CWMR5x_i927_recovery.tar.md5
ICS 4.0.4 LiteRom 0.9.0
LiteKernel
hmm, mine doesn't - it just shows it's connected, and won't transfer any data .

Categories

Resources